Jabber for iphone. Unable to register

Hello,
   I am having problems to register my iphone client to CUCM.
   I am using CUCM 9.1.1 with last COP file installed and Jabber for iphone 9.1. I have followed all the steps according to the Admin guide
1.- Change Service Parameters > SIP Dual Mode Alert Timer to 3000
2.- Change SIP Profile and keepalive/register/subscribe timers
3.- Crate device Phone > Add New > Cisco Dual Mode for iphone
      Device Name is TCTJOSEHER
Assign a number and associate to end user JoseHer
4.- Associate device to user and associate CCM End user and CTI enabled permisions
Standard CCM End User
Standard CCM Gateway Administration
Standard CCM Phone Administrator
Starndard CTI xfer and conf
Standard CTI... rollover
Standard CTI Enabled
After multiple attempts, i cannot register the phone.
Looking to the logs it seems the phone try to register with no success
[TCTConnectionManager ssaCallbackWithStatus:] Starting VoIP account
-- 2013-06-20 12:25:41.055 DEBUG [3d73eb88] - [CSIPhoneManager switchToMode:] Already in mode CSIPhoneModeSoftphone
-- 2013-06-20 12:25:41.056 DEBUG [3d73eb88] - [CSIPhoneManager setStatus:] Setting status from CSIPhoneStatusDisconnected to CSIPhoneStatusRegistering
-- 2013-06-20 12:25:41.056 DEBUG [3d73eb88] - [CSIPhoneManager setSelectedDevice:] New selected device (null) using protocol --
-- 2013-06-20 12:25:41.056 INFO [3d73eb88] - [TCSessionViewManager softphoneStatusDidChange:] Softphone status changed to CSIPhoneStatusRegistering.
-- 2013-06-20 12:25:41.057 DEBUG [3d73eb88] - ##call count = 0
-- 2013-06-20 12:25:41.060 DEBUG [3d73eb88] - -[TCTConnectionManager softphoneStatusDidChange:]
-- 2013-06-20 12:25:41.061 DEBUG [3d73eb88] - [UMCVoipAccount setConnectionStatus]: Connecting
-- 2013-06-20 12:25:41.075 DEBUG [3d73eb88] - UCM connection attempted over cellular in foreground
-- 2013-06-20 12:25:41.078 DEBUG [3d73eb88] - [CSIPhoneManager registerClient:] tftpAddress: 10.200.1.167 mode: CSIPhoneModeSoftphone, devicename: TCTJOSEHER
-- 2013-06-20 12:25:41.079 DEBUG [3d73eb88] - CSIPhoneHelper::setLocalAddress - Setting client IP address to 192.168.208.201
-- 2013-06-20 12:25:41.087 DEBUG [3d73eb88] - CSIPhoneHelper::setCachePath - Setting phone cache path to /var/mobile/Applications/5ED6CCB8-FFB7-47A5-9D18-D78A5FB71A98/Documents/Caches/
-- 2013-06-20 12:25:41.089 DEBUG [3d73eb88] - CSIPhoneHelper::registerClientByDeviceID - Registering with tftpAddress: 10.200.1.167 deviceName: TCTJOSEHER
-- 2013-06-20 12:25:41.092 DEBUG [3d73eb88] - onNormalCapabilitiesUpdated
-- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - -[CSIPhoneManager normalCapabilitiesUpdated:type:]
-- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - [CSIPhoneManager normalCapabilitiesUpdated:type:] Received 0 for CAPA_CONV
-- 2013-06-20 12:25:41.093 DEBUG [3d73eb88] - [CSIPhoneManager normalCapabilitiesUpdated:] self.status 2
-- 2013-06-20 12:25:41.094 DEBUG [3d73eb88] - [CSIPhoneManager hangUpPendingCallForLostCapabilities:] ringingSessions count : 0
-- 2013-06-20 12:25:41.141 DEBUG [3d73eb88] - [EMAccount connectionStatusDidChange]: Active voip account is nil. Update isEMServiceAvailable and isSignedIn.
-- 2013-06-20 12:25:41.142 DEBUG [3d73eb88] - [UMCAccountManager connectionStatusDidChange]: post AccountManagerDidChangeConnectionStatusNotification for voip or otherServices change 0
-- 2013-06-20 12:25:41.142 DEBUG [3d73eb88] - [UMCVoipAccountViewController updateCtiStatusOnConnectionChange] - #ctiEnabled deskphone: (null), ctiStatusString:Not Configured
-- 2013-06-20 12:25:42.976 DEBUG [3d73eb88] - Analytics connection failed! Error - The request timed out.
-- 2013-06-20 12:26:11.079 INFO [3d73eb88] - ...previous log message repeated 10 times...
-- 2013-06-20 12:26:11.079 INFO [3d73eb88] - [CSIPhoneManager registrationDidTimeout:] An attempt to register timed out. Unregistering client.
-- 2013-06-20 12:26:11.084 DEBUG [3d73eb88] - [CSIPhoneManager unregisterClientWithError:] Unregistering client.
-- 2013-06-20 12:26:11.085 DEBUG [3d73eb88] - [CSIPhoneManager setStatus:] Setting status from CSIPhoneStatusRegistering to CSIPhoneStatusDisconnecting
-- 2013-06-20 12:26:11.085 DEBUG [3d73eb88] - [CSIPhoneManager setSelectedDevice:] New selected device (null) using protocol --
-- 2013-06-20 12:26:11.085 INFO [3d73eb88] - [TCSessionViewManager softphoneStatusDidChange:] Softphone status changed to CSIPhoneStatusDisconnecting.
-- 2013-06-20 12:26:11.086 DEBUG [3d73eb88] - ##call count = 0
-- 2013-06-20 12:26:11.086 DEBUG [3d73eb88] - -[TCTConnectionManager softphoneStatusDidChange:]
-- 2013-06-20 12:26:11.086 INFO [3d73eb88] - [TCTConnectionManager softphoneStatusDidChange:] CSIPhoneStatusDisconnecting, Softphone status set to DISCONNECTED.
Also in the CUCM you can see the attempts to register (so discard connectivity issues) that are seen from the CUCM
The error received is UNABLE TO CONNECT
any help would be appreciated.
thanks in advance.

Hello
I have same your problem but I didnt change or add anything from CUCM 9 all configuration as default.
thanks

Similar Messages

Jabber for iPhone 9.6 Integration with OpenLDAP

     Hi everyone! i just found an issue when try to integrated jabber for iphone version 9.6 with OpenLDAP that seem like not working and want to describe my environment as below.
Using BE6K 9.1 includes,
     - CUCM 9.1.2
     - IM&Presense 9.1
     - Jabber for Window 9.6 integrate with OpenLDAP using EDI on jabber-config.xml is working properly.
     - Jabber for iPhone 9.6 integrate with OpenLDAP using BDI on jabber-config.xml not working(cannot lookup)
     - Jabber Voice for iPhone and Android can integrate with OpenLDAP which configure in phone configuration
     - Both of Jabber can't access the photo in OpenLDAP with "jpegPhoto" attribute.
By the way im also included jabber-config.xml files for further troubleshooting. Another question, is it possible to include EDI and BDI for working together in one jabber-config.xml file
One another file is jabber for iphone log when im trying to search "anu" word in searching box
-- 2557-02-02 20:48:06.045 DEBUG [3d8d018c] - sidebar search, string is : a   <------ started from this line in my log file for easier troubleshooting.
If you need more log or any files for troubleshoot just tell me. Thanks for reading!.
<Jabber-config.xml>
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>OpenLDAP</BDILDAPServerType>
<BDIPrimaryServerName>10.0.1.11</BDIPrimaryServerName>
<BDIServerPort1>389</BDIServerPort1>
<BDIConnectionUsername>cn=xxx,dc=xxxx,dc=xx,dc=xx</BDIConnectionUsername>
<BDIConnectionPassword>xxxxxxxBDIConnectionPassword>
<BDIUseJabberCredentials>false</BDIUseJabberCredentials>
<BDIEnableTLS>false</BDIEnableTLS>
<BDIPredictiveSearchFilter>uid</BDIPredictiveSearchFilter>
<BDIUserAccountName>uid</BDIUserAccountName>
<BDIBaseFilter>(&(objectClass=inetOrgPerson)</BDIBaseFilter>
<BDISearchBase1>ou=users, dc=xxxx,dc=xx,dc=xx</BDISearchBase1>
<BDIUseANR>false</BDIUseANR>
<ConnectionType>1</ConnectionType>
<PrimaryServerName>10.0.1.11</PrimaryServerName>
<UseWindowsCredentials>0</UseWindowsCredentials>
<UseSecureConnection>0</UseSecureConnection>
<SearchBase1>ou=users, dc=xxx,dc=xx,dc=xx</SearchBase1>
<UserAccountName>uid</UserAccountName>
<BaseFilter>(&(objectClass=inetOrgPerson)</BaseFilter>
<PredictiveSearchFilter>uid</PredictiveSearchFilter>
<ConnectionUsername>cn=xxxx,dc=xxx,dc=xx,dc=xx</ConnectionUsername>
<ConnectionPassword>xxxxxx</ConnectionPassword>
<PhotoSource>jpegPhoto</PhotoSource>
</Directory>
</config>

Hi noom_ekkalak ,
Thanks for your answer!
I have specific LDAP parameter in TCT phone configuration as you say, then try to connect the "Directory" setting in Jabber Voice, but it didn't work . i just get the error “Unable to verify account” all the time. :(
Besides this ,is there anything i need to specific? How did you specific Jabber Voice "Directory" parameter?
Thank you!

Jabber for iPhone 6 - version 10.5 on iOS 8

Hello All,
Just wondering if anyone has the same issue as me. I had an iPhone 4S and use the current version of Jabber for iPhone with all services on it until yesterday when I got my iPhone 6. On the iPhone 6, however, I cannot get the client to register to CUCM. All other services including voicemail, and IM & presence work just fine - I just cannot make phone calls.
THe error I get is "Failed to Get Device Configuration".
Our organization is running CUCM 8.6, CUP 8.6, and Unity Connection 8.6 (upgrading soon :P)
Just as an FYI, I am using an iPad 3 with Jabber 10.5 and can register just fine. Previous to getting an iPhone 6 it also, worked just fine.

I am currently running jabber 10.5.0.189050 with iphone 4s ios 8.0.2 I have seen very little issue with this so far. My backend cisco servers are at the latest 10.5 code (CUCM, UNITY, Presence,etc) along with latest version of expressway. If you say you are not supporting this then what is currently supported as I have a large sales team that we are planning to deploy this to soon, mostly running iphone 5's and a mix of ios 7 and 8. New employees coming in on iphone 6 and ios 8.0.2 If you can't tell me here then where to we find up to date accurate information.
thank you , jeff magnuson

VCS Expressway event log errors when Jabber for iPhone and Windows log in

hi folks,
I've deployed Collaboration Edge with VCS Control and Expressway:
my Jabber for iPhone succesfully can log in from Internet and it can IM but not calls and I see next messages in VCS Expressway when Jabber is logging in:
2015-03-27T18:00:28+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49543" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 16:00:28,204"
2015-03-27T17:58:55+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49535" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:55,786"
2015-03-27T17:58:32+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49527" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:32,202"
2015-03-27T17:58:08+02:00
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49512" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 15:58:08,582"
"Digest User" in the "Protocol Specific Information" section of Phone Configuration selected right user. in this Jabber I see following error "Failed to get device configuration". however Jabber for Windows and for Android hasn't such issues - they succesfully can log in from Internet and it can do calls and IM but I see next messages in VCS Expressway when Jabber is logging in. The same log line appears when Jabber for Android log in:
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="56751" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 14:19:11,769"
and I can't find any information which describe such types of error.
thanks!

Thanks Srini, but the instructions have two options:
1. Use the Control Panel, select "Oracle 11g..." and uninstall from there.
This is of course the first thing I tried, but as I said, there is no entry for Oracle 11g in my "Programs and Features" applet.
2. Download the install package and run OracleXE.exe with the remove iss file.
Firstly, there is no OracleXE.exe in the package I downloaded, just setup.exe;
Secondly, setup.exe ignores the iss parameter and tells me that OracleXE is already installed (setup.log contains ResultCode=-3) so it can't be installed.
Is there somewhere else to get an OracleXE.exe that will work for 11g? Or are these the instructions for 10g and haven't been updated yet?
Am I unusual in not having a Control Panel entry?
(and I understand this is a beta - that's partly why I'd like to uninstall it - I'll go back to 10g and not be so impatient :))
Regards,
Andrew

No "touch to return to call" option in Jabber for iPhone

I noticed that when I'm in a Jabber call and I press the home button on my iPhone, the call stays up audio only but there is no indication on the iPhone that I'm still in a call. When you are on a regular PSTN call on iphone and you press the home button, there is a green notification message at the top that says "tap to return to call". Is this possible with Jabber for iPhone?
Thanks, Mike

All of those are configuration issues, go thru the config guide once again and review it step by step and make sure it's all properly configured.
Jabber is not registering to CUCM, it has not been configured as a softphone, or the deskphone association is wrong.
If you can see the DN info from the users but not able to call, then at least your directory integration is fine.
DNs not reachable is again a config problem with call routing, CSS and partitions.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Jabber for iphone on CUCM 8.6.2

We have jabber for Iphone configured on CUCM 8.6.2, Everything is working fine except voicemail (CUC 9.1.2)
It shows status " Not signed", but when you try to enter credentials manually, it doesn't allow to enter Voicemail server. It is greyed out.
Searched community and couldn't find much info regarding this issue.
Any help is much appreciated.
Thanks!

Manish. Thanks a lot for your reply.
Yes, we have configured voicemail server settings
Voicemail Username
Voicemail Server
Voicemail Message Store Username
Voicemail Message Store 10.1.1.10

Jabber for iPhone force auto-connect

Hello,
Does anybody know if it is possible to force Jabber for iPhone/iPad to connect to a wireless SSID network as soon as it is available?
We recently implemented Jabber and we are noticing that some times, users arrive to the office, where corporate SSID is available, but even if jabber is running on the background, it won't automatically reconnect to the network.
User will have to manually open the application and wait for Jabber to reconnect.
Is it possible to make this process automatic for the user?
Regards,

CUCM version is 8.6.2.
Presence version is 8.6.4
Jabber for iPhone & iPad is 9.6.2
The issue is that if Jabber is running on iPhone's background, even if wireless connection is activated, it seems to disconnect. In order to reconnect, user has to manually open Jabber and wait for the connection to establish, especially to make calls.
The same applies when a user is running Jabber, he arrives from outside to the company and wireless reconnects to corporate SSID. Jabber won't automatically reconnect until user opens the app.
Regards,

Jabber for iphone with cucm 10.5

Hi
i would like to configure cisco jabber for iphone for the purpose of using my smartphone for calls and instant Messaging
my question is : i will need COP file uploaded into CUCM 10.5 or already integrated and also the configuration required
regards

These guides will give you additional info on config part:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0110.html#JABI_TK_C15AA350_00
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0101.html

Jabber for iPhone, Incoming Calls go Missed Call

Incoming Calls on Jabber for iPhone, shows immediately as a missed Call.Has anyone had this issue? It is intermittent, and happens especially when the Mobile is locked.
Thanks,
HA

Hi Hamed, i have the same problem.
Do you still having the issue? any solution provided so far?
thanks.

Jabber for iPhone cannot call over Expressway. Expressway says: Bad Extension

Hi,
I've had Expressway working but now calls from/to Jabber for iPhone fail with a message "Bad Extension" in Expressway-E.
Is there someone that is willing to share the search rules of Expressway-E required that are required for Jabber to make/receive calls. I think I accidentally deleted one or changed one.
Regards,
Erik

Yes, I got an answer from TAC and it is was the solution to my problem.
It had to do with announcing IPv6 support by the clients. (header "Requires: anat")
By creating a new Common Device Configuration that disables IPv6 (IP Addressing Mode), thus IPv4 only, and assigning this common device configuration to all devices using MRA, solved my problem.
Let me know if this also fixes your problems!
Regards,
Erik Tamminga

Jabber for iPhone & iPad too long to connect to "Phone Services"

Hello,
Has anybody ever experienced delay issues with Jabber for iPhone and/or iPad to connect to "Phone Services"?
In my case, the service does connect but it can take about 1 minute. Some times it can be faster but some others it can take a while to make the service available.
Regards,

You've hit the nail on the head with your last sentence, though to me a month (and then another) to wait for a new line is nothing - I am on my fifth order with BT. They lost the first three, then tried charging me an arm and a leg in excess charges for the fourth. I am trying again, this time with a total package to see if they are a bit more useful when they actually know I'm not going to switch to another provider - fingers crossed.
If they do come back with massive excess charges again though this time I've done my homework. I now know the measurements between my property and the pole as well as the BT price list they use to calculate the charges. I've also worked out a cheaper route than the one they were suggesting - Ofcom say they should offer the cheapest route and the opportunity for the customer to do some of their own work but with me they didn't do either. They also didn't consider that we don't have reliable mobile signal here. They also didn't provide me with any details of how they'd come to that figure and just demanded it. I've had lots of advice from DEFRA, the Department for Business, Innopvation and Skills, Ofcom and ex-Openreach planners and should be able to get a line under the USO. I have a horrible feeling that I've done all this homework now though and they'll just come out and do it without demanding the excess, but if they do I am at least ready this time.

Jabber for IPhone/IPad and Anyconnect VPN

I have just setup Jabber for iPhone and iPad in a CUCM 8.6/Presence 8.6 enviornment. Works great when on my wireless network at work.
The problem I have is that it doesn't work with Anyconnect VPN. Running 8.4 code and can access the CUPS website from the iPhone/iPad when on vpn. It just will not connect the Jabber clients. I have attached the logs for review.
There is only one difference in our wireless connectivity and VPN connectivity that I can think of at this point. Could it be my DHCP configuration not offering option 150 for tftp on the VPN? I am using a local pool on the ASA but it doesn't offer option 150 for tftp.

It's been a while so I don't recall exactly what I did. That said: I want to say that I connected it via the wireless network to let it pull down it's configuration and after it pulled down the initial configuration I was good to go on VPN.

Where is the documentation for Jabber for iPhone and iPad 9.6.1 ???

Jabber for iPhone and iPad 9.6.1 was released on Tuesday Jan 14th 2014.
I see the 4 .cop files on cisco.com in a zip file copfiles_iOS96.zip. What is the difference between the 4 files? Application in the AppStore on my iPad, but there are no release notes, or documentation on cisco.com. All I can assume is that these .sgn files need to go on my Publisher/TFTP server?
Nothing here about a 9.6.1
http://www.cisco.com/en/US/products/ps11596/prod_release_notes_list.html
iTunes
https://itunes.apple.com/us/app/cisco-jabber/id467192391?mt=8
cop sgn files
http://software.cisco.com/download/release.html?mdfid=284288351&flowid=45930&softwareid=284006014&release=9.6%281%29&relind=AVAILABLE&rellifecycle=&reltype=latest

I only see two COP files, one for iPhone (TCT) and one for iPad (TAB). These are required on older (can't believe I'm calling 8.6 older already!) builds of CUCM.
Which other files do you see?
Please remember to rate helpful responses and identify helpful or correct answers.

Compatibility between Jabber for iphone 9.0.2 and CUCME 9.1 (IOS 15.2(4))

Hi,
I would like to know if Jabber for IPhone version 9.0.2 is compatible with a CUCME 9.1. The problem is that we are using Jabber for a couple of months running on a CUCME 8.6 and we did not have any problem and since we upgraded to 9.1, we lost some settings directly into Jabber settings.
We cannot configure anymore the voicemail and Directory settings and if we want to delete an account into Jabber, we need to delete the application from the phone and re-download it from the appstore after.
If anyone has some information on that, it will be very appreciated.
Thanks

Hi Steve,
Just checked the release notes of Jabber for iphone 9.0.2 and I see that we only support CME 8.6 and 8.8
HTH,
Christos

Transfer VOIP Calls Between Cisco Desk Phone and Cisco Jabber For IPhone 9.5

Does anyone know how to transfer an active voip call from a Cisco IP Desk Phone to Cisco Jabber for IPhone? I can transfer a call from Cisco Jabber for IPhone to my Cisco IP Desk Phone no problem. I put the call on hold and then click "Resume" on my Cisco IP Desk Phone. However I cannot do the same but the other way around. If I put the call on hold on my Cisco IP Desk Phone, I see "no active call" on my Jabber client. The only information I could find slighlty relevant was using the Mobility Key/Remote Destination Profile feature however this defeats the object as this will forward to an external number, e.g. mobile and I just want to transfer the call within the VOIP environment between the two devices that are using the same directory number.
I am using Cisco Call Manager 9.1(2), Cisco Presence 9.1 and Cisco Jabber for IPhone 9.5.
Any help would be greatly appreciated.
Kind Regards,
Paul Parker.

Did you ever find an answer to this ?
I am seeing the same behavior and trying so see if I can put calls on hold and pick them up both ways also.
The only answer I seem to have found is to use park instead
That would/should work but I would just prefer to hold/unhold
Just not sure why we would not be able to hold/unhold on what is essentially a "shared" line
Does anyone have this working for them ?

Jabber for iphone. Unable to register

Similar Messages

Maybe you are looking for