Jar file problem , please help

Hi guys , i am not sure if i am in the right place to have this post in so i'll give it a try
i know my explanation might be a shot in the dark but i'll try my best
i have made a program using eclips , to send emails using my email , on certain conditions
so when that codition happenes on some class in my program
this class will call the email class and send an email to someone
now the problem is not in the program , because as along as this program is in eclips and i run the program in eclips , everything goes fine , No errors what so ever
but , if i make jar file , using eclips "export"
once i run the program , the program would run , but once the same condition that ihave specified previously happenes , the current class never calls the email class , and no emails would be sent
i am very confused wether
1) it throws a class not found for some wierd reason
2) or the external library that i used to send emails , is not exported
i tried to check the CLASSPATH file and i think everything seems to be fine , so i dont know what the problem is
so in short
if the program is in eclips , every thign goes fine
if the program is a jar file , then it would work fine but once it needs to send an email , it never does and i can still work on the program , but no emails will be sent
thanks please some one help me out with this

for more information here is the senario
because i see that you guys are some how lost because i am not providing enough information
so this is a detailed info of the problem
i have 3 classes
1) mybankmain (jframe)
2) mybankbody (all labels and buttons and events included here)
now: within some events in my program ,
it calls a class called.....
3) myEmail
this class imports two things that are comming from an external jar file , so in short , if the external jar file is not available the program would complain
i run this on windows xp (SP2)
now: if this program runs on eclips , it would do everything it is supposed to do and all kind of calculations will be done and emails will be sent on the conditions that i have specified within the program
if i make a jar file on windows , and i run the jar file , the file would work , all functionalities will work
EXCEPT: sending an email
- either my class is not found
- or external jar file is not found which causes my class not to be able to perform its tasks
i did only one test
which is that i switched the main and i made myEmail as a main and i tried to export the jar file
Result: jar file doesnt work
the way i view whatever inside my jar file , i use Winrar and it would view everythign in the jar file and i see that all my classes are included there
if i open my CLASSPATH , i see that there is a pointer to the external jar file
if i open my manifest : i DO NOT see the exrernal jar file in there but i do see that its pointing to my main class
class main : mybankmain
and there is only the version and signiture
i hope all these additional details would help in determining the problem that ihave been trying to solve for 2 weeks now

Similar Messages

  • Beginner: Can't convert a hello.class file into a jar file. Please Help!!!

    Hi, I created a hello.java file, converted into a hello.class file by using the java 2SDk compiler. The problem is that the hello.class file is in a directory I created: C:\JavaBuilder\hello.class
    I have a problem converting the hello class file into a jar file. I don't know which approach to take. I've looked at tutorials...but I keep getting more confused each time I view the tutorials on creating jar files. Please can someone help..by taking me through a step by step process. Please be explicit and do not leave or assume that I know any details because I'm a new born beginner. Thank you very much, I seriously appreciate it.

    Hi!
    first of all, you should use an upper-case character for the first letter of your classes...
    To answer your question :
    1) you must create a directory named "meta-inf" in your directory "C:\JavaBuilder"
    2) then,you must create a file named "manifest.mf" in this directory
    it's like a property file and it must contain this :
    Main-Class: hello
    (don't forget to type <enter> after "hello")
    3) in the directory "C:\JavaBuilder", you can enter the following command :
    "jar cvfM hello.jar meta-inf\manifest.mf hello.class"
    (check jar.exe is in your path)
    4) you can run your jar by the command :
    "java -jar hello.jar"

  • Eclipse, Apache POI, compiling jar file. Please help =(

    Hello =) I have written a program in Eclipse using the apache POI library. I have added the POI JAR to my build path and the program runs as it should within Eclipse. Once I export my program to a JAR file, I run it from the command line. Each time I do i get the following error:
    {C:\Documents and Settings\Koneko>java -jar "C:\Documents and Settings\Koneko\Desktop\review.jar"
    Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/poi/poifs/filesystem/POIFSFileSystem" }
    I have no idea why this is happening and have searched the internet for hours looking for an answer =\
    please help.
    -Matt

    I usually put them in WEB-INF. But I thought it doesn't matter where they are if you define them correctly in the web.xml file.

  • How can i set the dos can compile and excute the jar file?please help?

    How can i set the dos prompt can compile my .java file and execute my jar file.

    Go to where you downloaded your Java SDK. Look around for a button labled "Installation." Click the button. Download the installation instructions. Read them. Then read them again.

  • Flash file problems please help :)

    I was given a .FLA file and a .EXE version of the file.
    The .FLA file will not let me publish it in any format not even .EXE
    I had the web page link to the .EXE so that peopel could download it.
    Now my boss wants the .FLA file to be viewable on the web and not download it like with the.EXE file
    She also wants the file to automatically when the page is loaded.
    I figured I would just publish the .FLA file to .SWF and have it autoplay on the internet.
    The problem is that the .FLA file will let me edit it but it will not let me publish it in .SWF or any other settings.
    I have found an EXE to SWF converter but the .SWF file created from the converter will not autoplay on the internet.
    The .SWF file created from the .EXE to SWF converter will only play after you Right click and select Play.
    What do you think I should do?
    Thanks,
    Travis

    I can have the publish settings set to anything that I want.
    The thing is that it will just not publish it at all, not in any format that I select.
    When I click Publish, it will create a .swf icon on my desktop but it quickly dissappears as soon as it is done publishing.
    I have reinstalled Flash.
    I have renamed the .fla file and tried it all again.
    I have created a new .fla file and copied and pasted all the layers.
    None of these methods work. I would upload it here but the file is 150MB.
    Here is the link, at the top "Click here to view demo" will take you to the .exe file.
    http://www.stratamarkds.com/techniques_alive.html
    If you want I think I can have it link to the .fla file.
    Thanks for all your help thus far,
    Travis

  • I have an MS word doc saved from a Macbook in my flash drive. Now i want to print this from an IBM compatible laptop. problem is -- I can't access the file. Please help.

    I have an MS word doc saved from a Macbook Pro on m flash drive. Now i want to print
    th same doc from an IBM Compatible laptop. Problem is, I can't access the file. Please help.

    I suggest you post your question on Microsofts own forums for their Mac products as it's their software you're having issues with:
    http://answers.microsoft.com/en-us/mac

  • Hello!i have problem to insttal potoshop cs6 this is,we've encountered the following issues.installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.please,help me

    this is,we've encountered the following issues.
    installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.
    please,help me!

    Hi there Mylenium, is there any way you can help me? My cs6 is doing all kinds weird things lately. The liquifying too stopped working completely, when I try to work with the actions, it starts flickering and changing opacity in color by itself. It starts flickering and is completely out of whack! I tried uninstalling and reinstalling and still no luck. I tried getting in touch with adobe and no luck with that neither! Is there anyway you might be able to help?

  • 500 Internal Server Error again pleas (including log file)..please help

    1. After i unziped and installed jdeveloper to:
    C:\Jdevstudio successfully
    2. Then i created the untitled1.jsp page ---> only showed Hello world and save
    3. the Embedded OC4J Server compiled successfully ..i thought this meant nothing wrong with the code.
    Successful compilation:0 errors, 0 warnings..
    4. But when i looked into the Embedded OC4J Server-Log
    i found the error :
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
    C:\Jdevstudio\jdk\bin\javaw.exe -client -classpath C:\Jdevstudio\j2ee\home\oc4j.jar;C:\Jdevstudio\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=wwwcache.aber.ac.uk -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Dhttps.proxyHost=wwwcache.aber.ac.uk -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config\server.xml
    [waiting for the server to complete its initialization...]
    14 ส.ค. 2551 15:30:33 com.evermind.server.XMLDataSourcesConfig parseRootNode
    INFO: Legacy datasource detected...attempting to convert to new syntax.
    14 ส.ค. 2551 15:30:34 com.evermind.server.jms.JMSMessages log
    INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
    14 ส.ค. 2551 15:30:34 com.evermind.server.jms.JMSMessages log
    INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 7813 ms.
    Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
    51/08/14 15:30:38 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
    This caused 500 Internal Server error
    5. Then i went to Tools--> Preferences--> Deployment--> unchecked Bundle Default data-source.xml During Deployment...
    I got less error showing:
    C:\Jdevstudio\jdk\bin\javaw.exe -jar C:\Jdevstudio\j2ee\home\admin.jar ormi://144.124.120.45:23891 oc4jadmin **** -updateConfig
    14 ส.ค. 2551 15:33:58 com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl preInitApplicationServer
    WARNING: ORB ignoring configuration changes. Restart OC4J to apply new ORB configuration.
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 8109 ms.
    Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
    This still caused 500 Internal Server Error
    6. I still did know the real problems then i read the installation guide of jdev
    is it necessary to set the JavaHome in C:\Jdevstudio\jdev\bin\jdev.conf
    or do i need to set ORACLEHome in this file
    7. from the log file the server called Jdk under Jdevstudio\jdk\bin\javaw.exe -jar
    it seemed fine...
    8. Anything wrong with admin.jar....
    9. is the problem from setting not setting jdk (javahome) or admin.jar...or OC4J problems please help
    i would appreciate you help
    thank you

    i deleted pesistence directory like what you said but i found the bigger error in the log ...
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
    C:\Jdevstudio\jdk\bin\javaw.exe -client -classpath C:\Jdevstudio\j2ee\home\oc4j.jar;C:\Jdevstudio\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=wwwcache.aber.ac.uk -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Dhttps.proxyHost=wwwcache.aber.ac.uk -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=*.aber.ac.uk|localhost|127.0.0.1|win2006 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\Jdevstudio\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config\server.xml
    [waiting for the server to complete its initialization...]
    14 ส.ค. 2551 17:05:46 com.evermind.server.jms.JMSMessages log
    SEVERE: Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
    java.lang.InstantiationException: The system cannot find the path specified
         at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1072)
         at com.evermind.server.jms.JMSUtils.toInstantiationException(JMSUtils.java:1237)
         at com.evermind.server.jms.JMSServer.recoverState(JMSServer.java:1831)
         at com.evermind.server.jms.JMSServer.internalSetConfig(JMSServer.java:209)
         at com.evermind.server.jms.JMSServer.setConfig(JMSServer.java:182)
         at com.evermind.server.ApplicationServer.initializeJMS(ApplicationServer.java:2412)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:955)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.io.IOException: The system cannot find the path specified
         at java.io.WinNTFileSystem.createFileExclusively(Native Method)
         at java.io.File.createNewFile(File.java:850)
         at com.evermind.server.jms.ServerFile.safeOpenFile(ServerFile.java:775)
         at com.evermind.server.jms.ServerFile.access$000(ServerFile.java:77)
         at com.evermind.server.jms.ServerFile$2.run(ServerFile.java:719)
         at oracle.oc4j.security.OC4JSecurity.doUnprivileged(OC4JSecurity.java:325)
         at com.evermind.server.jms.ServerFile.openFile(ServerFile.java:716)
         at com.evermind.server.jms.ServerFile.<init>(ServerFile.java:133)
         at com.evermind.server.jms.PersistentMap.loadFile(PersistentMap.java:100)
         at com.evermind.server.jms.PersistentMap.<init>(PersistentMap.java:61)
         at com.evermind.server.jms.JMSServer.recoverState(JMSServer.java:1823)
         ... 6 more
    51/08/14 17:05:46 *** (SEVERE) Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
    14 ส.ค. 2551 17:05:46 com.evermind.server.ServerMessages severeJmsServerStartupException
    SEVERE: JMS: Failed to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConfig[file:/C:/Jdevstudio/jdev/system/oracle.j2ee.10.1.3.39.84/embedded-oc4j/config/jms.xml]
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 7719 ms.
    Target URL -- http://144.124.120.45:8988/Application1-view-context-root/faces/untitled1.jsp
    51/08/14 17:05:50 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
    anything problems that came from admin.jar..????

  • My iTunes won't open! It keeps saying 'The iTunes Library.itl is locked on a locked disk or you not have write permission for this file.' Please Help!

    My iTunes won't open! It keeps saying 'The iTunes Library.itl is locked on a locked disk or you not have write permission for this file.' Please Help!

    this may happen on external drives if:
    The external drive was hotpluged (removed) without going the correct "eject" way
    The iTunes library (database) got corrupted
    First Aid for external drive
    Close iTunes
    Unmount (eject) external drive the right way.
    Mount drive again
    Go to Workplace -> right click external drive -> choose "clean up" This will force the filesystem to rescan the file structure of the drive and rebuilding the file system table and journaling file.
    After the tool shows "done" (could last some time depending on size of drive) restart iTunes
    If your iTunes library is on your internal drive, this may happen
    The system was not shoot down correct, e.g. "pulled the plug"
    The iTunes library (database) got corrupted
    First Aid for internal hard drive
    Close iTunes
    Reboot system
    Go to Workplace -> right click external drive -> choose "clean up"
    After the tool shows "done" (could last some time depending on size of drive)
    Reboot system, restart iTunes
    If none of the above fixes your problem, post here.
    Lupunus

  • My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t  solve my problem. please help!!

    my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

    Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

  • Problem Please help me.....Let me know the area to look for it I am a DBA..

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM  MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service 'sapmsPRD' unknown
    TIME        Wed May 04 08:59:06 2005
    RELEASE     620
    COMPONENT   NI (network interface)
    VERSION     36
    RC          -3
    MODULE      ninti.c
    LINE        428
    DETAIL      NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER     1
       at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.SAPConnection.Open()
       at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
       at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
       System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
       System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
       SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.search.LoadRegionDetails()
       SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
       System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
       System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
       System.Web.UI.Page.RaiseChangedEvents() +115
       System.Web.UI.Page.ProcessRequestMain() +1099

    The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
    This is basically telling the requester at what port to look for the message server.
    C

  • Problem Please help me.....Let me know the area to look for it

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION CPIC (TCP/IP) on local host
    ERROR service 'sapmsPRD' unknown
    TIME Wed May 04 08:59:06 2005
    RELEASE 620
    COMPONENT NI (network interface)
    VERSION 36
    RC -3
    MODULE ninti.c
    LINE 428
    DETAIL NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER 1
    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
    at SAP.Connector.SAPConnection.Open()
    at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
    at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
    at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
    at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
    SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.search.LoadRegionDetails()
    SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
    System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
    System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
    System.Web.UI.Page.RaiseChangedEvents() +115
    System.Web.UI.Page.ProcessRequestMain() +1099

    Hi
    You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
    sapmsPRD      3600/tcp
    Good luck!
    René van Es

  • While Installing adobe reader and acrobat im getting error 1406 this error. I had already tried every possible step including special permission in registry file. Please help..

    While Installing adobe reader and acrobat im getting error 1406 this error. I had already tried every possible step including special permission in registry file. Please help..

    What is your operating system?  Is there anything else beside the number 1406?

  • [TV@Master] Problem please help

    I have Msi.mother board PT8-Neo -LSR ,  Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
    the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
    please help

    i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
    please read my reply again
    my operating system is win me and i have also another pc have XP
    when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
    but it give me this 2 mesages  when i try to install the driver
    MSI TV card is not found ,stop the installation
    the other message is
    MSI pvs driver installatin failed
    i download the driver from msi page also give me the same messages
    for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
    what to do now 

  • I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

    If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Maybe you are looking for

  • File adapter - change of encoding in the header of the xml message

    Hello! I would like to change the encoding in the header of an xml message (sent to a a receiver file adapter) from <?xml version="1.0" encoding="UTF-8" ?> to <?xml version="1.0" encoding="ISO-8859-1" ?> We have XI 3.0 with SP15. Can anybody help me

  • Perform ON COMMIT doesn't work (Try it)

    Has anyone tried a PERFORM ON COMMIT within a BADI? It doesn't work and i don't know why. I am working with the HR Module, and i have a BADI, which is fired when the user hits the 'SAVE' button (PA30 Transaction).. when this happens, i execute a PERF

  • 9.2 doesn't allow dragging photoshop file into album artwork field?

    hey all. i've often used photoshop to quickly clean up/crop bad album covers before adding them to my albums. this used to be super easy: just open in photoshop, make the changes, then copy and paste into itunes' album art field in the bottom left. h

  • Is it a bug that  BOE XI 3.1 emailing doesnot  supports FRC2822?

    Dear All, SMTP RFCs.                                                                                The main concern is around section 3.4 of that RFC. It says that                                                                    addresses in addre

  • Company code deletion

    hai Guys, I have assigned my company code to palnts ,P.og etc. after sometime I want to delete the com .code  for some reason  and redefine and assign  the same name .. What is the Impact if i do the same... Pls answer ... Thanks