Java error when testing JCo-Destination

hi,
i create a JCo-Destination with connection type 'ticket', when testing it i got the message:
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Der Aussteller des SSO-Tickets ist nicht authorisiert
What do i have to do ?
best regards, Martin

Hi Martin,
Just to ensure that the error is because of SSO ticket configuration. Please create a SAP Transaction iview for any transaction and assign the SAP System configured for SSO.
If you are able to test it successfully then the issue is different. Otherwise as pradeep said configuration of SSO is not done. Search for some blogs or messages in forum for the same. There are a lot. Even the link given by pradeep will also help.
Hope this helps!
Regards
Atul Shrivastava

Similar Messages

Error when Testing JCO....

Hi Experts ,
I have created a new technical system from SLD , and using that system i have created a JCO , but when i am testing the JCO i am getting the following error
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=srmlac GROUP=SRMLAC_D39_01 R3NAME=D39 MSSERV=sapmsD39 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsD39' unknown TIME Sat Jul 5 11:11:57 2008 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE niuxi.c LINE 1725 DETAIL NiPGetServByName2: service 'sapmsD39' not found SYSTEM CALL getservbyname_r COUNTER 1
Please provide solution ...
Full points awarded.....

Hi ,
Muhammed Ali & Sergo Beradze ,
Thanks for your replies..
Service files are already maintained and i have also taken a restart still the same problem is existing.
Same error is coming whwn i am testing the JCO.
i.e .
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=srmlac GROUP=SRMLAC_D39_01 R3NAME=D39 MSSERV=sapmsD39 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsD39' unknown TIME Sat Jul 5 11:11:57 2008 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE niuxi.c LINE 1725 DETAIL NiPGetServByName2: service 'sapmsD39' not found SYSTEM CALL getservbyname_r COUNTER 1
One thing more which i noticed is when i made the technical system in SLD , there is nowhere were i have to specify the IP address ...
And the database tab of the system is disable in technical systems at sld .
when i compared this new technical system with the already present system i find some diffrences too .
Please provide me with some more suggestions .
Thankyou .

Error when testing from Message mapping test tab

Hi Experts,
I am wondering that when i test the message in the MM test tab its giving error and target message is not generating. I am not testing end to end then why it is triggering communication channel?
I can see that the 'RFC_Alert_Service_RFC_Receive' communication channel is in Red color RWB--> communication channel monitoring. I even even refreshed the cache and also activated the RFC channel but no use.
Below are the error details:
Error when testing message from test tab of mapping -->
java.lang.RuntimeException: Exception during processing the payload.Problem when calling an adapter by using communication channel RFC_Alert_Service_RFC_Receiver (Party: , Service: RFC_Alert_Service, XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing
Error in Communication channel monitoring -->
Receiver channel 'RFC_Alert_Service_RFC_Receiver' for party '', service 'RFC_Alert_Service'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts.
Please help me how can i resolve this issue to successfully test the message in mapping-test tab.
Regards,
Suresh.

> Error in Communication channel monitoring -->
> Receiver channel 'RFC_Alert_Service_RFC_Receiver' for party '', service 'RFC_Alert_Service'
> Error can not instantiate RfcPool caused by:
> com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts.
Unlock the user you are using in the RFC channel and provide the correct password in the channel configuration. Once the channel error is resolved you would be able to test the Mapping sucessfully...
>>why it is triggering communication channel?
You would be using RFC lookup in the mapping....
~SaNv...
Edited by: Santhosh Kumar V on Jul 8, 2009 5:48 PM

Getting error in creating JCo destination for WebDynpro

Hi Guys,
I am getting an error in creating JCo Destination under Web Dynpro Content Admin.I am deploying MSS on Netweaver portal SR1 and ecc 5.0.I am getting a message"An error has occurred: "Failed to process the request."Contact your System Admin.
When I am seeing the details:
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
Web Dynpro code generators of DC sap.com/tcwdtools:
No information available
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
6.40 patchlevel 87289.311
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_07-b05, vendor: Sun Microsystems Inc.
Operating system:
Windows 2003, version: 5.2, architecture: x86
Error stacktrace:
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:871)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
     at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:737)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:635)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Please help me guys.
Paritosh

You should post your question to the Webdynpro forum:
Web Dynpro Java

Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI

Hi, PI experts.
When refreshing XI cache I get following error:
Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.
Status of XI Runtime Cache is
Unable to refresh cache contents
Error during last attempt to refresh cache
When starting cache delta refresh I get an error OBJECTS_OBJREF_NOT_ASSIGNED
HTTP-destination INTEGRATION_DIRECTORY_HMI works correct (gives an error 500)
In Cache Connectivity Test - Java IS and Adapter Engine are green and ABAP IS is yellow giving message Attempt to fetch cache data from Integration Directory not yet started or still in process
I also read forum threads:
sxi_cache
Error while refreshing the XI runtime cache
and How To Handle XPI Caches in SAP NetWeaver 04s but didnt find there a solution
Can anybody give me an advice how to solve this problem

Hi
You please check the INTEGRATION_DIRECTORY_HMI in SM59.
Check the following fields:
Target host:host name of xi
Service No:xxxxx(ex:53000)
Path Prefix:/dir/hmi_cache_refresh_service/ext
make sure the service no is not Java port.
Logon credentials:
User:XIISUSER

Message Servers not appearing when creating JCO Destination

Hello Experts,
I had created a System Object in the Portal system landscape based on System Template (Template) and choosed SAP system with load balancing (to connect to R/3 server).
Given parameters to Connector, ITS, WAS and User management, when i test the connection test on these settings, All are successful except the connector settings. but when run the transaction code(System Administration -> support-> portal runtime-> SAP Transaction) by selecting this message server, it is executing.
And i want this message server to be selected when creating JCO destination.
This System Object is not showing in the message servers dropdown box selection when creating the JCO destinations.
What may be the issue.
Could anyone help me in solving this.
Thanks in advance
Regards
Sunil

Hi,
Have you checked the Technical systems in the SLD ? When you click on check sld , you appear an SLD url ,,,
Typing the same URL in browser and loging inwith SLD USER .... have you seen all the technical system which you want to appear while creating the JCO's ..
Regards,
Srini

Java Error when launching BLS

Using xMII 11.5 SP3, one of our other xMII developers is getting the following Java error when launching the BLS editor:
Unable to load resource: http://xmiid.oxy.com/Lighthammer/CMSLogicEditor/activation.jar
His computer was reimaged a couple of days ago with our standard image (Windows XP SP2, IE6 SP2). It worked fine on his computer prior to the re-image. He's reloaded Sun Java 1.4.2_01 on his computer (our company default is 1.4.1_01.)
I can't duplicate the error on any of our test computers - one of which was also recently re-imaged.
Any ideas?
David

David,
So other standard imaged machines are running 1.4.2_01 and have no issues? I would expect to see problems with the webstart cookie handling for that version, but I'm running _15....
Try clearing the Java WS cache on the problematic client instance to watch it try to download all the libraries fresh.
File...Preferences, reconfirm that the None radio button is selected on the General tab, and then on the Advanced tab, press the Clear Folder button.
You could also make sure before hitting the editor link in the Menu.jsp that there are no dead or leftover javaws processes running in the task manager.
Regards,
Jeremy

Spectrum digital DSK5416 driver setup gives an error when test wizard is run.

Please help us with the following problem we are facing:
1.   Spectrum digital DSK5416 driver setup gives an
error when test wizard is run. A snap shot of the same has been
attached.
2.   The A/D module doesn’t pickup microphone signal or
an audio sample for loopback but the implementation of the same works
fine in CCS environment. (We are using Mic In and Speaker Out lines)
3.   When a real-time application has run successfully
and if you close the VAB environment the application starts running
automatically until you reset the board.
4.   We don’t find the flash program button enabled, so
that any real-time program can be burned into flash and demonstrate the
embedded feature.
Note:
We are using Windows Xp professional edition.
Program is developed using DSK5416

Hello, I have included some information that will help address your questions: (1) I couldn't see the attached image file (contained errors). The RIDE/VAB DSK5416 Driver makes use of a JTAG communication when reading/writing memory on the DSK5416 hardware. You will need to make sure that the JTAG transfer option has been selected in the Driver Setup dialog box. The memory test process may seem to take a long time due to the amount of memory being accessed. (2) The VAB RTDSKAD block component provides a one-channel A/D input that makes use of the line-in channel on the DSK5416 hardware. (3) VAB does not remove the downloaded DSP executable program from DSK5416 memory, and it does remain resident. That being said, I wouldn't expect that the program would begin execution when VAB is closed. I would recommend that you verify that the DSP program stopped properly upon selecting the VAB Stop command. Then, close VAB as normal. (4) The RIDE/VAB driver for the DSK5416 does not support programming of flash memory on the DSK5416 hardware. Regards, Steve

SQL Developer 3.2 crashes with java error when using OCI/Thick Driver

I just installed SQL Developer 3.2 on my linux desktop. SQL Developer crashes with a java error when I select a database from the object tree.
When I check Use OCI/Thick driver the application will crash when I navigate to the tree and open a database.
The app does not crash then I have Use OCI/Thick driver unchecked.
Here are some details of my environment:
Desktop OS: Fedora 17 Linux
$ uname -a
Linux 3.5.1-1.fc17.x86_64 #1 SMP Thu Aug 9 17:50:43 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Java:
$ java -version
java version "1.6.0_34"
Java(TM) SE Runtime Environment (build 1.6.0_34-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.9-b04, mixed mode)
Oracle instant client:
$ sqlplus -V
SQL*Plus: Release 11.2.0.3.0 Production
Here are the error messages:
$ sqldeveloper
Oracle SQL Developer
Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x00007f6de7157664, pid=3049, tid=140109371119360
# JRE version: 6.0_34-b04
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.9-b04 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# V [libjvm.so+0x516664] unsigned+0xd4
# An error report file with more information is saved as:
# /tmp/hs_err_pid3049.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
/opt/sqldeveloper/sqldeveloper/bin/../../ide/bin/launcher.sh: line 544: 3049 Aborted (core dumped) ${JAVA} "${APP_VM_OPTS[@]}" ${APP_ENV_VARS} -classpath ${APP_CLASSPATH} ${APP_MAIN_CLASS} "${APP_APP_OPTS[@]}"

I also had the problem of SQL Developer crashing when using OCI/Thick driver but I've managed to solve it. My configuration is:
- Windows 64-bit
- Java 64-bit (1.6.0.34)
- SQL Developer 3.2.09 64-bit
- OCI Instant client 11.2.0.3 64-bit (without installation).
The thing that solved the problem was copying two files, ojdbc5.jar and ojdbc6.jar, from Instant client installation folder to JAVA_HOME/lib/ext folder+.
After that, I haven't had a single crash or error message.
The same trick that solved the problem on 64-bit installation also solved the problem on another windows computer with 32-bit SQL Developer installation.

LSO: Java errors when using Authoring Environment to check-in eLearning

Have any users here encountered any of these Java errors when trying to check-in eLearning content to the Master Repository?
reuseObj is null
java.lang.NullPointerException: reuseObj is null
 at com.sap.hcm.ls.shared.repository.exchange.DeltaVersionData.<init>(DeltaVersionData.java:62)
 at com.sap.hcm.ls.shared.repository.exchange.CopyMan.checkIn(CopyMan.java:160)
 at com.sap.hcm.ls.shared.repository.exchange.Publisher.checkInObjects(Publisher.java:270)
 at com.sap.hcm.ls.las.repository.explorer.wizard.steps.CheckInObjectsStep.workerThread(CheckInObjectsStep.java:85)
 at com.sap.hcm.ls.shared.util.swing.wizardfw.steps.ProgressWizardStep.run(ProgressWizardStep.java:209)
 at java.lang.Thread.run(Unknown Source)
No semaphore for: /<path>/_groupManProps.txt
java.io.IOException: No semaphore for: /<path>/_groupManProps.txt
 at com.sap.hcm.ls.shared.repository.control.implicit.ImpVersManager.getAndUpdateNextRevisionNumberForGroup(ImpVersManager.java:920)
 at com.sap.hcm.ls.shared.repository.control.implicit.ImpVersManager.postSpecifyRevisionNumber(ImpVersManager.java:624)
 at com.sap.hcm.ls.shared.repository.exchange.CopyMan.copyProps(CopyMan.java:867)
 at com.sap.hcm.ls.shared.repository.exchange.CopyMan.checkIn(CopyMan.java:227)
 at com.sap.hcm.ls.shared.repository.exchange.Publisher.checkInObjects(Publisher.java:270)
 at com.sap.hcm.ls.las.repository.explorer.wizard.steps.CheckInObjectsStep.workerThread(CheckInObjectsStep.java:85)
 at com.sap.hcm.ls.shared.util.swing.wizardfw.steps.ProgressWizardStep.run(ProgressWizardStep.java:209)
 at java.lang.Thread.run(Thread.java:619)
Unexpected object state: /<path>/v1/ [rep=http://<path>:80/publishing/LSO_SH1/, type=4, props={status=reserved, type=4, isVersioned=m, pathHash=1855656709}]
com.sap.hcm.ls.shared.repository.access.ConcurrentIOException: Unexpected object state: /<path>/v1/ [rep=http://<path>:80/publishing/LSO_SH1/, type=4, props={status=reserved, type=4, isVersioned=m, pathHash=1855656709}]
 at com.sap.hcm.ls.shared.repository.exchange.Publisher.announceToPublisherDB(Publisher.java:733)
 at com.sap.hcm.ls.shared.repository.exchange.Publisher.checkInObjects(Publisher.java:288)
 at com.sap.hcm.ls.las.repository.explorer.wizard.steps.CheckInObjectsStep.workerThread(CheckInObjectsStep.java:85)
 at com.sap.hcm.ls.shared.util.swing.wizardfw.steps.ProgressWizardStep.run(ProgressWizardStep.java:209)
 at java.lang.Thread.run(Thread.java:619)
They each seem to point to some degree or another to using Versioning, but I've gotten those errors whether the "Use Delta Versioning..." checkbox is checked or unchecked. I do have the standard versioning settings set in the IMG, the standard delivered settings. And it's referencing the same file, _groupManProps.txt, that doesn't exist in any of the packages I've tried to publish/check-in. I've tried both AICC and SCORM content and I get the same errors.
We have an ECC6 system on EHP5, and using Authoring Environment version LSOAE09_0-10006103.
I'm running the Authoring Environment on a 64-bit Windows 7 PC.
I've tried to publish/check-in with the following versions of the Java SDK:
1.4.2 Update 13
1.4.2 Update 19 (the latest in 1.4.2 with a Windows installer available)
6 Update 14 (a colleague is using this version successfully with the AE)
6 Update 23
Each of those were the 32-bit versions after trying a 64-bit version of one (based on my PC's OS) and getting an unrelated 64-bit error.
I would appreciate any experience or wisdom any other users here have to share.
Thanks!
Jason
Edited by: jtrain on Nov 22, 2011 9:29 AM

It was an adjustment we made on our ISA 2006 server. Under
1. Open Array - Configurarion - General
2. Select Additional Security Policy - Configure Flood Mitigation
3. On the Flood Mitigations Tab, there are a number of flood mitigation settings that can be configured.
The setting we had to adjust is under the "Maximum HTTP requests per minute per IP address (Click on Edit)
Increase the "Limit:" setting. We set it to 1500 which resolved our problem.
4. Apply the policy and wait for the configuration to be updated on all array members ( may take several minutes)
Regards,

Java error when trying to edit file - access denied

We have been running Vibe 3.0 for a couple years with no issues but suddenly users have begun to get java errors when trying to edit a file from Vibe. When a file entry is opened and the "Edit this file" link is clicked, a dialog pops up that says :
Error from command:
java.security.AccessControlException: access denied (java.io.FilePermission <<ALL FILES>> execute)
Has anyone else seen this? Could it be related to some windows security update perhaps? Any ideas how to resolve would be appreciated. This happens with regular users as well as admin.
Vibe is running on SLES 10 with mysql. We are using IIS Windows Authentication.
Thanks

dangross,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Java error when i try to scan a check

I Get a Java error when I try to scan a check for remote deposit. Any help to correct the following error will be greatly appreciated:
Java Plug-in 1.6.0_24
Using JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VM
User home directory = /Users/ginahumphrey
Java Plug-in 1.6.0_24
Using JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VM
User home directory = /Users/ginahumphrey
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
java.lang.NoClassDefFoundError: Could not initialize class SK.gnome.twain.TwainManager
 at bluepoint.homescan.client.model.TwainHelper.getSourceList(TwainHelper.java:123)
 at bluepoint.homescan.client.presenter.MainPanel1Presenter.initScannersComBox(Main Panel1Presenter.java:465)
 at bluepoint.homescan.client.presenter.MainPanel1Presenter.<init>(MainPanel1Presen ter.java:242)
 at bluepoint.homescan.client.MorenaStudio.init(MorenaStudio.java:29)
 at sun.applet.AppletPanel.run(AppletPanel.java:424)
 at java.lang.Thread.run(Thread.java:680)

Having the same exact problem! I get:
Exception in thread "thread applet-bluepoint.homescan.client.MorenaStudio.class-1" java.lang.NoClassDefFoundError: Could not initialize class SK.gnome.twain.TwainManager
 at bluepoint.homescan.client.model.TwainHelper.getSourceList(TwainHelper.java:123)
 at bluepoint.homescan.client.presenter.MainPanel1Presenter.initScannersComBox(Main Panel1Presenter.java:465)
 at bluepoint.homescan.client.presenter.MainPanel1Presenter.<init>(MainPanel1Presen ter.java:242)
 at bluepoint.homescan.client.MorenaStudio.init(MorenaStudio.java:29)
 at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Plugin2Manager.ja va:1640)
 at java.lang.Thread.run(Thread.java:680)
The process has worked on and off but now it never works. Someone please help us!

4215 Java error: When connecting from IPS event viewer

Hello-
I received a java error when trying to connect to my 4215 with Cisco IPS event viewer. It is as follows:
IOException in open Subscription(): java.security.cert.CertificateExpiredException: NotAfter: Sunday March 29
Is the web server running on 10.x.x.x:443? Please check the communication parameters of the device.
I can set the date on my pc back to last week and all works fine like b4. I have tried updating my java to the latest version and created a new certificate from the IPS.
Any help would greatly be appreciated:
Thanks

Hi,
The issue can be resolved by following the steps as below
1.Login to the sensor.
2.Run the tls generate-key command.
3.Make sure the certificate is generated.
4.Add the device again. It should work now.
REf: http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_qanda_item09186a008025c533.shtml
Do rate if it helped.
Regards
Sridhar

Error when testing java -jar whitelist.jar -help

I found an error when executing this commande
C:\oracle-javacloud-sdk\lib>java -jar whitelist.jar -help
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/cloud/
scanning/cli/ScannerMain (Unsupported major.minor version 50.0)
        at java.lang.ClassLoader.defineClass0(Native Method)
        at java.lang.ClassLoader.defineClass(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.defineClass(Unknown Source)
        at java.net.URLClassLoader.access$100(Unknown Source)
        at java.net.URLClassLoader$1.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClassInternal(Unknown Source)
what can be the origine of this error
Thanks

Try using JDK 1.7 - (version 51.0) as I have no problem running with 1.7.0_21
/michael

RFC error while creating JCo Destinations

Hi Team,
We have been getting RFC_Communication_Error over time and again while creating MetaData type JCo Destination in EP 7. Actually We am configuring a Business package for ESS.
I am pasting the error,
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=<server> GROUP=public R3NAME=<xxx> MSSERV=sapms<yyy> PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapms<yyy>' unknown TIME Tue Jun 12 16:43:08 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE ninti.c LINE 530 DETAIL NiPGetServByName2: service 'sapms<yyy>' not found SYSTEM CALL getservbyname_r COUNTER 4
We have created Application type connections successfully. the tests on these were also successful.
Thank you,
Vamshi

Can u pl check for the entry in the services file of the JAVA Engine/portal.
sapmsQ10 36XX/tcp
If this entry is not there please create the same @ ..WINDOWS\system32\drivers\etc\ open the services file in notepad and make an entry in the last line.
format is
sap<SID> Press TAB once 36XX/tcp<Press Enter>
where XX is the Instance no of your Java Central Instance.
If the prob persists please update.
Priyabrata

Java error when testing JCo-Destination

Similar Messages

Maybe you are looking for