Java.sql.SQLException: Could not generate the DTD because..

I am trying to reverse an XML file and running into the following exception:
java.sql.SQLException: Could not generate the DTD because the file could not be created. Verify that you have write permission in the directory.
I have permission to the directory, so I suspect something else is causing this. I saw in another thread that file name length sometimes caused this. I tried that approach and it did not help.
I am trying to get data from an oracle table and put it in an XML file using an interface.
I have my interface set to use an oracle source table and an XML target. My LKM is SQL to SQL and my IKM is SQL Control Append. I have staging area different from target set.
My model (for the XML file) has technology set to XML, uses the SnpsXML jdbc driver and I use the following parameters in my file path: f, d, s, dp. This tests successfully.
I am trying reverse the xml file using standard reverse.
I am running this on a remote agent.
I am using ODI 10.1.3.5.5
Thank you for any help you can provide me.
Edited by: user13279807 on Oct 19, 2010 11:44 AM

The exact error message I recieved was the following:
The Technology or the Driver used does not support Reverse Engineering.
java.sql.SQLException: Could not generate the DTD because the file could not be created. Verify that you have write permission in the directory.
Details:
java.sql.SQLException: Could not generate the DTD because the file could not be created. Verify that you have write permission in the directory.
     at com.sunopsis.jdbc.driver.xml.bw.a(bw.java:810)
     at com.sunopsis.jdbc.driver.xml.bw.<init>(bw.java:450)
     at com.sunopsis.jdbc.driver.xml.bx.b(bx.java:292)
     at com.sunopsis.jdbc.driver.xml.bx.a(bx.java:270)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDriver.connect(SnpsXmlDriver.java:110)
     at com.sunopsis.sql.SnpsConnection.v(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
     at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
     at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
     at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
     at com.sunopsis.dwg.reverse.Reverse.getMetaData(Reverse.java)
     at com.sunopsis.graphical.frame.a.ip.a(ip.java)
     at com.sunopsis.graphical.frame.a.ip.a(ip.java)
     at com.sunopsis.graphical.frame.a.hq.b(hq.java)
     at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
     at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
     at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
     at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
     at java.lang.Thread.run(Thread.java:619)

Similar Messages

  • Thread: Could not generate the XML in single thread mode

    Hi all,
    I have created a report using PLSQL Procedure method after submitting the request I am getting the following Error.Couldn't sort out why I am getting the error while running the report.
    Error in "Multi threaded or single threaded execution block" of XXRX_REPORT_OUTPUT_PKG.insert_into_nested_table procedure
    ERROR :ORA-20005: Could not generate the XML in single thread mode
    XXRXERROR: XXRX_REPORT_OUTPUT_PKG.run_report SQLERROR: ORA-20005: ORA-20005: Could not generate the XML in single thread mode
    Can someone help me out finding the issue
    Thanks in Advance

    Hi,
    Please read SQL and PL/SQL FAQ
    We cannot guess what is the error if you don't post any part of your code.
    Additionally when you put some code or output please enclose it between two lines starting with {noformat}{noformat}
    i.e.:
    {noformat}{noformat}
    SELECT ...
    {noformat}{noformat}
    Regards.
    Al                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Java.lang.RuntimeException: Could not find the OffLine WLST class

    Installation of OIM On weblogic.
    oracle/oim/xellerate/setup/setup.xml:443: The following error occurred while executing this line:
    /oracle/oim/xellerate/setup/weblogic-setup.xml:196: java.lang.RuntimeException: Could not find the OffLine WLST class
    at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:539)
    at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:384)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
    at org.apache.tools.ant.Task.perform(Task.java:364)
    at org.apache.tools.ant.Target.execute(Target.java:341)
    at org.apache.tools.ant.Target.performTasks(Target.java:369)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
    at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
    at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
    at org.apache.tools.ant.Main.runBuild(Main.java:668)
    at org.apache.tools.ant.Main.startAnt(Main.java:187)
    at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
    at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
    Tried to run this command ./wlst.sh
    shows
    CLASSPATH=/home/oracle/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/oracle/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk/lib/tools.jar:/oracle/weblogic/server/server/lib/weblogic_sp.jar:/oracle/weblogic/server/server/lib/weblogic.jar:/home/oracle/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/oracle/weblogic/server/server/lib/webservices.jar:/home/oracle/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/oracle/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:
    PATH=/oracle/weblogic/server/server/bin:/home/oracle/bea/modules/org.apache.ant_1.6.5/bin:/oracle/jdk/jre/bin:/oracle/jdk/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/home/oracle/bin:/oracle/jdk/bin
    Your environment has been set.
    CLASSPATH=/home/oracle/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/oracle/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk/lib/tools.jar:/oracle/weblogic/server/server/lib/weblogic_sp.jar:/oracle/weblogic/server/server/lib/weblogic.jar:/home/oracle/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/oracle/weblogic/server/server/lib/webservices.jar:/home/oracle/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/home/oracle/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar::/oracle/weblogic/server/common/eval/pointbase/lib/pbembedded57.jar:/oracle/weblogic/server/common/eval/pointbase/lib/pbtools57.jar:/oracle/weblogic/server/common/eval/pointbase/lib/pbclient57.jar
    Initializing WebLogic Scripting Tool (WLST) ...
    Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class

    try Problem invoking WLST - Could not find the OffLine WLST class the last post on this thread, he claims to solve the problem...

  • CiscoWorks LMS 4.0.1 - Could not generate the report

    Hello,
    I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
    I tried the same procedure with 2 other switches but I have got the same result.
    Does anybody has an idea of how I can fix this issue?
    Thanks a lot in advanced.
    Best regards,
    Marc Hoffmann

    Hi Marc,
    I have this problem too. I rebooted my Windows but no solved. You known the service name responsible for this error? You have any other sugestion?
    Thank you !!!

  • Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP

    Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP. I am using the Design Studio 4.3.2 for building the O2A 2.1.0 PIP. Please let me know how to resolve this issue. Here I am enclosing the log file .

    We have basically the same issue when we try to create the interpreter using the embedded method..
    I was able to use the interpreter embedded in a java client as long as the weblogic jars were located in a weblogic install if I tried to use them from a maven repository no luck at all...
    All of this worked easily in 9.2 now in 10.3 it seems more error prone and less documented.
    I have seen close to a 100 posts on issues related to this so is there a document which outlines specifics....
    We / I have used weblogic now for almost 10 years and moving from 8.1 to 9.2 was painful and we expected the move from 9.2 to 10.3 not to be soo bad but its proving to be as painful if not more painful than moving to 9.2. We seem to spend a good bit of our time working around issues in the next new release that were not in the previous one..
    Any help would be appreciated I think we will open a support case but even that is more painful...
    Any help would be greatly appreciated..
    PS: We confirmed that all jars in the startweblogic classpath were in the startup. The server we have the embedded wlst instance is a managed server and we are using the component in a war... Are there any restrictions which we are unaware of.
    Error we get is
    1 [ERROR] com.tfn.autex.order.weblogic.QueueMaintenanceUtility.addQueue():217 Error Adding Queue wowsers JNDI Name wowsers Exception: Invocation Target exception while getting the WLSTOffLineScript path

  • Could not generate the flash file(SWF)

    Hi all,
    I am working with a Dashboard having a GMap plugin and it was working fine on BO server.
    But now the plugin has been changed from GMap to CMaps plugin. I am able to download the same dashboard from BO Server to my desktop.
    The snapshot of the warning I get while downloading the dashboard has been attached.
    When downloaded from server, in place of displaying map on GMap plugin I get a warning "Invalid request this request is invalid" but when i open its properties the warning goes and the map appears back.
    Then I tried to upload the same dashboard on BO Server and I get an error "Could not generate the flash file(SWF)...". The snapshot of the same has been attached.
    I am unable to do any modification on this Dashboard.
    Regards

    Hi,
    In your discussion,you have downloaded the dashboard file from the BO server to your desktop.
    You can export the dashboard to BO Server in SWF format.But how can you download the physical dashboard file from BO server.Is it possible?
    Do the changes in .xlf physical file and export the .xlf file to BO server as File-->Save to platform.
    Regards,
    Venkat P

  • TS1398 hi my ipad is connected to my wifi but it keeps coming up with safari could not open the page because the server stopped responding its saying this know matter what i try to open what am i doing worng please help

    my ipad will not load any pages an after about 10 mins comes up with safari could not open the page because the server stopped responding but iam conected to wifi please help as i have been trying for 2 days now and is doing my head in

    Does the iPod connect to other networks OK?
    Do other devices now connect and work OK?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS3274 I am having problems with Safari  It keeps coming up with Safari could not open the page because the server stopped responding, when I click on Safari  How can I remedy this WiFi is OK.

    When I turn on my Ipad and click on Safari it says  Safari could not open the page because the server stopped responding.but I can get on internet with Google Chrome.   What is the problem and how can I repair it?

    Found the answer in the more like this panel and now working.  Thanks.
    But have 3 updates waiting in Apps but it is taking ages to update them and cannot get onto Apps by clicking Apps on the desktop.screen.

  • I am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

    i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

    As I said the iTunes program on the computer.  You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.

  • HT1414 I just got a replacement iPhone 5 (64MB) for one with a cracked face, and tried to restore it.  Got an error message saying the iTunes could not restore the iPhone because not enough free space is available on the iPhone.  Now what?

    I just replaced my iPhone 5 because of a cracked face.  I backed up the old phone to iTunes.  When I tried to restore my data off of iTunes to the new phone, I got an error message saying that iTunes could not restore the iPhone because not enough free space is available on the new iPhone.  Now what?
    I have Apple Care+, but I'll be darned if I can find any way to contact anyone at Apple to talk to about this.  They take your money, but make darned sure they don't have to support you unless you jump through a bunch of hoops first, like this site.

    I've done a restore.. The phone was completely wiped back to factory settings.. It then tells me there isn't enough space on the phone to restore from back up? How when the phone is empty?!

  • Could not complete the command because of a problem using the Adobe Color Engine

    Hi all
    This bizarrely started this morning - completely out of the blue - and I've no idea why.
    Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
    Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
    As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
    Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
    I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
    At present I can only safely carry out the work 'manually' by completing all the actions myself.
    I can think of no settings that have changed and the OS hasn't been updated in a while.
    I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
    Any help appreciated as I have a shedload of stuff to process.
    Best wishes
    TP

    OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
    BUT!
    Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
    Will try that out this afternoon, but for now: WIN!
    Many thanks for the suggestion!
    TP

  • HT4972 After upgrading iPhone 4 to iOS 5.1.1 getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored" HELP!

    I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
    I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
    Any advice would be much appreciated.

    I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on.  If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

  • Could not complete the command because there is not enough memory (RAM)

    Hi Folks:
    I am running into an error (Could not complete the command because there is not enough memory (RAM)) when trying to open any file of any size or any format.on my Mac.
    This error occurs when:
    No other applications or files are open
    Upon a fresh reboot
    After Repairing Disk Permissions
    The files can be opened by Fireworks and other image editor apps or video apps
    My SPECS:
    OSX 10.5.8
    4GB 667 MHz DDR2 SDRAM
    120.41 GB Free space available
    Graphics: GeForce 8600M GT - VRAM 512 MB
    PhotoShop settings:
    Available RAM 3072 - Let PS use 90% (2764)
    I really appreciate the help.

    http://forums.adobe.com/thread/370739?tstart=0
    http://forums.adobe.com/thread/370735?tstart=0

  • Could not complete the command because the extension could not be loaded

    I was working in 3D with PS CS5 Extended. I went to the Window drop down menu and selected Color. I got the message "Could not complete the command because the extension could not be loaded" and the color pallet and swatches would not appear. I had to click on OK the error message three times to get rid of it as it kept reappearing. The the mini bridge and Brush pallets opened, including Brush Presets tab and Clone Source tab instead of the color pallets. How can I get my color pallets back?
    I am on an iMac Intel core i3 running OS X Lion 10.7.2
    Thanks for any help.
    Thanks,
    Don

    I unstalled Photoshop.  Then I installed on another drive.  External.  It did the same thing!!!!  No mini-bridge, or any extentions loading.  I don't know what is wrong.
    I read something somewhere about a Panels file in photoshop.  So I'm looking there.

  • Could not complete the command because of a program error

    I am running CS3 and for some reason, I get this error on many of the filter options. To reproduce:
    - load any picture - it does not matter what format I use
    - create a new layer by selecting the new layer icon at the bottom of the layers pallet
    - with the new layer selected, going to the menu item filter/blur/Gaussian Blur
    I have reset the preferences by pressing ctrl/alt/shift while bringing up Photoshop.
    I also have reinstalled (repaired) Photoshop.
    I've tried many different pictures with several formats (raw, .psd, .jpg) with no luck.
    Interestingly enough, the filter Lens Blur does come up with the screen.
    What am I doing wrong? This should not be rocket science.....
    Thanks,
    Steve

    "...create a new layer by selecting the new layer icon at the bottom of the layers pallet..."
    That produces a blank layer. With this blank layer selected, you should get the message "Could not complete the command because the selected area is blank".

Maybe you are looking for

  • Questions on scanning negatives?

    I thought I'd post a new thread, as had some remaining questions and didn't want to hijack someone else's thread. I'm embarking on scanning in all my previous 35mm colour negatives, and have so far learnt quite a lot both from experimentation and fro

  • .csv as parameter in a procedure

    Hi, I want to pass a .csv file in a Procedure as parameter which ahs following values: CODE NAME 1 ABC 2 DEF 3 XYZ I want the procedure tot ake .csv file as parameter and in that procedure oracle sql loader will populate the records into TABLEA Any h

  • Slower internet connection when connection wireless network

    Currently using a Linksys WRT54GL wireless broadband (firmware v4.30.5) router in conjunction with a Thomson Speedtouch 546i ADSL router (ISP provided). My problem is that when I connect to the internet over the wireless network I experience a much s

  • Pse 9 Restore problems

    Using Windows XP and running PSE 6 & 8, I backed up catalogues to disk.  Four years worth.  I cannot restore those disks to my current Mac computer, running PSE 9.  Can anybody help, or are those pics gone forever.  I no longer have access to the ori

  • Non-Library Synced music lost after latest iTunes update. Help!

    I downloaded/update to the latest itunes which caused my phone to be reset to its factory settings. Although my contacts, photos and apps ect. were recovered, my music was not. I had a lot of music (2500+) on my phone which was however not synced to