Java.util.zip.ZipFile.entries() shows only 99 files but zip file is fine.

Hi,
I have a wierd issue with java.util.zip.ZipFile
Code as simple as
ZipFile file = new ZipFile("my.zip") ;
System.out.println(file.size());
For this particular zip file, it says 99 files found but the zip contains more than 60,000 files. I tried the zip with unzip and zip utilities and the zip file checks out fine. I even tried to unzip the contents, and zip 'em up all over again, just to eliminate the chances of corruption while the zip was being transferred over the network.
The same program works fine with another zip containing more or less the same number of files and prints 63730.
Any idea? This can not possibly be related to the type of files the zips contain? right? In any case, the contents of both zips are text/xml files.
Any help would be greatly appreciated.
Regards,
ZiroFrequency

I know its a problem with this particular zip. But whats interesting is that "unzip" can easily open / verify the zip and claims that it is a valid zip.
As I wrote earlier, I unzipped the file and zipped up the contents again in a new zip but java can't still count the contents correctly.
So I am thinking there is something to do with the "contents" of the xmls inside the zip? (characterset issues?)
There are no exceptions thrown and no error anywhere :(
I basically need to pinpoint the issue so that I can have it corrected upstream as this zip file processing is an ongoing process and I need to resolve it not just once but for the periodic executions.
Hope this helps explain the issue.

Similar Messages

In my i cloud contacts show only 98 but in my i phone thay show 1400 . why thay not sync with i cloud,

in my i cloud contacts show only 98 but in my i phone thay show 1400 . why thay not sync with i cloud,

Welcome to the Apple Community.
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Canon ir 2420 ufrii LT network printer show only processing but print not receive

My Canon ir 2420 ufrii LT network printer show only processing but print not receive,i have check its ip and network all is fine i also relode this software but result is same , show only processing print not recieve ,please if you have any trick please share , Thaks for you support

I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
However there are 2 aur packages that provide the UFRII driver :
- cndrvcups-lb (built from source)
- cndrvcups-lb-bin (uses the binaries)

Duplicate entries showing up in "Manage Open Files"

We are seeing an odd phenomenon with file sharing on our Windows Server platform. I'm posting here because I haven't seen anything quite like this in my Google searches.
Off and on, when a user will try to access a file stored on the share of our file server, the file will open in "Read Only" format. Usually this has to do with multiple users having the file open at once, but by the time the user experiencing the
issue would get around to telling me about it, I couldn't find any indication of a conflict in "Share and Storage Management" and they would be able to open the file after I prompt them to try again.
I've done my due diligence by checking for leftover locking files on the share, but have not seen any, so up until this point I've just chocked the issue up to happenstance.
However, I finally managed to catch the problem in the act. A user was showing me something on their computer when the file they tried to open showed up as "Read-only." I opened the share manager on our file server, and saw only that user had opened
the file. I asked them to close the file and try again. They did, and got the "Read-only" version again. I refreshed the view in "Manage Open Files" and saw this:
When the user opened the file, it looks like the file server thought the user opened the file 5 separate times all at once. 4 instances of the open file are marked "Read" while only one is marked "Read, Write."
Has any one seen this behavior before?
Thanks for your help,
DSell

Hi DSell,
From the screenshot it is a doc file. So please first check if there is any temp file created in the folder e:\users\nk\documents\signs. This including tmp files and files with no extension.
Shaon,
In response to your reply, I'd like to point out that I already mentioned looking for temp files and didn't find any:
"I've done my due diligence by checking for leftover locking files on the share, but have not seen any, "
Specifically this means I was on the look out for files matching the open file in the users folder starting with a "~$". In each instance, the temp file was not there. I would
also like to point out again that the file was completely closed, there were no entries of open files in the file manager before the user tried to open the file once. As soon as they tried to open it once, 5 entries of the open file showed up immediately in
the File manager. Very strange.
The user indeed has permission to read and write to the folder. I have not seen the issue occur for non-Office files, but I will report as soon as I see that behavior.

Finder shows only aliases and no files!

I recently reinstalled a 2008 mini with 10.5.8 to regain the use of deleted iLife and on its way to using Snow Leopard after a disasterous loss of use of peripherals following 'upgrading' to Lion. It's main use is as a storage drive so I don't spend much time gazing at it, hence my surprise to see that, in Finder, the startup volume - it has three partitions - only shows drive alaises and no files or folders at all.
This occurs when the said main partition 'Hard Disk' icon is selected in the sidebar and only aliases for the other partitions and attached drives show on the right pane. When the 'Computer' icon is selected, all drives appear on the right and when the main partition is selected, its full complement of files etc. is shown. It is as though the contents of the /Volumes folder is all that the main drive's icon can display.
I have run Disk Utility and Repaired Disk Permissions the said partition/volume and Verify Disk-ed the whole hard disk.
Although my intention is to upgrade this install to Snow Leopard, I don't want to do that only to find myself with a crippled drive display.
Any suggestions about getting the drive to display correctly?

First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.sidebarlists.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
Setup your Finder Preferences for the Sidebar again.

Windows 7 shows only N but it is connecter by ac standard

HI,
netsh wlan show drivers
    Sterownik                 : Intel(R) Dual Band Wireless-AC 7260
    Producent                 : Intel Corporation
    Dostawca                  : Intel
    Data                      : 2014-12-08
    Wersja                    : 17.13.11.5
netsh wlan show interfacesNazwa                 : Połączenie sieci bezprzewodowej 2
Opis                  : Intel(R) Dual Band Wireless-AC 7260
Identyfikator GUID    : b4993645-07e4-4a3d-8a50-b1637a15a8d3
Adres fizyczny        : zz:aa:bb:4a:cb:f8
Stan                  : połączono
SSID                   : xyz
BSSID                  : xx:yy:zz:00:00:00
Typ sieci             : Infrastruktura
Typ radia             : 802.11n
Uwierzytelnianie      : WPA2-Personal
Szyfr                 : CCMP
Tryb połączenia       : Autołączenie
Kanał                 : 0
Szybkość odbierania (Mb/s) : 866.7
Szybkość wysyłania (Mb/s)   : 866.7
Sygnał                      : 99%
Profil                : xyz
i have netis wf2780 blocked in ac standart, windows connect to it, speed is 876 so im sure this is ac standard, but windows shows only n connection - in windows 8 connection show ac
what can i do to force windows 7 to show ac
Thanks

Did you try searching the internet to see what was out there?
Check the below link. You find several references to this and it is in fact a deficiency in Windows 7 because the AC is newer than Windows 7. One post even points out the Windows 8 is deficient and the full AC capability is not realized until
Windows 8.1. This is not unusual with newer technology being used witholder operating systems.
"Intel(R)
Dual Band Wireless-AC 7260" and "Windows 7"

IPhotos doesn't show photos anymore, but iPhoto file is 30 Gb big.

Hello,
my probelm is that when i klick on the iPhoto fiel, it opens the file and than says no fotos. It changed from one day to the next. I hade my libery on a other harddisk, but it allways worked. Now I have the 30gb big file but I can't get the pics. Does anybody has the same problem or nows a way to get beck my pics?????

Thanks LarryHN for responding to the OP's question. Your answer solved the problem I had been having and I'm a lot less anxious about my digital images now.
But now I have two questions that I'm hoping someone can answer:
1. I downloaded some new images while my iPhoto was not using the right library. Using the alt/opt key, iPhoto is now pointed to the right library the majority of my images appear. But where are the ones that I downloaded while it wasn't pointed at the right library? I searched my hard drive for another iPhoto library and couldn't find anything?
2. A related question, I have some images that I KNOW are on my computer as I can see them in Finder. The location for them is given as iPhoto library/data/2008/July 28. But, they do not show up in iPhoto. Anyone know where I can find them to import them?
Thank you so much for any help!
Rosie

Offline files window shows drive name but no files to reconnect

I recently upgraded to Final Cut Studio 2 in the middle of a project (I know, broke the golden rule) but I had backed up my whole system drive so that was OK, install went fine. Now whenever I open the project, the "some Files are offline" window pops up and under "Files to Reconnect" there is the name of the main Scratch drive but no files to reconnect. Any ideas how to stop this happening? It doesn't seem to hinder the editing process but it's a bug I could do without. Just annoying more than anything.

Before clicking on "Reconnect", check the box that offers you to "Forget" the files. there may be 2 - one for media and one for render files.
Nothing like that. Just the drive name "BYTE:" and lots of blank space
PS And change your autosave to 5 minutes until you are sure FCP6 is stable on your system. On mine I have regular crashes. Also get the updates: I think we're on 6.0.2 by now.
Yes I'm up to the latest version 6.0.3 and I will change Autosave prefs to 5 mins good idea. I've actually pretty much finished the film. Taken 5 years so has been through several versions of FCP

I need the detail about how to read the data from spreadsheet file. but the file should not created by labview.

i face some difficulties here. the datas are encrypted...... how to get correct data ..........

Excel files are in a propriertary microsoft format. A LabVIEW "spreadsheet" file is a file containing an ASCII table with tabs separating columns and linefeeds separating rows. They are not ther same!
If you use "write to spreadsheet file" and name the file *.xls, this does NOT make it an excel file, it just tells the operating system to open it with excel if you double-click it. Excel is smart enough to notice that it is not really an excel file and does its best to convert it transparently. The same does not work in reverse.
You have several options:
You can use excel to export your data to something LabVIEW can read. Try e.g. tab delimited text.
You can use e.g. activeX to read an excel file, see: http://zone.ni.com/devzone/cda/epd/p/id/3409
Search for excel in your example finder for more possibilites.
LabVIEW Champion . Do more with less code and in less time .

300 GB HD, 6 GB free but Disk Inventory X shows only 151 GB of files

Greetings,
The title says it. I can't find the other files.
The affected machine is an imac 7 running OS X 10.5.8
Thanks in advance for any help finding the hidden files or correcting the read. FWIW The last back up on Time Capsule showed over 290 GB backed up.
nb

Thanks for looking folks. I've searched all over this site and others and I'm not having any luck finding a solution.
I'll keep reading.

SAP IDOC shows status 03, but no file is written

We have SAP configured to generate delivery IDOCs when the SAP Delivery document is posted/saved. The IDOC is initially created with status 30. There is batch job RSEOUT00 every 30 mins that collects the IDOCs in status 30 and converts to status 03. When we review the IDOC processing screen, even though they are in status 03 and successfully written outside of SAP to a folder, there is no file in the folder. We are missing IDOCs. There is no real time external system integration. We are simply trying to write IDOC files to a folder.
Can you some please share your insights on how to resolve this issue?
Thanks in advance
Satish

RFC destinations, Logical systems, and then Partner profiles needs to be maintained. and You need to create the Distribution model in sender system.
Partner profiles maintained in both the systems, soure Outbound properties
Target Inbound properties.
if you have two clients in system it will be easily you can check.

I am trying to save a DMS File through File upload UI element to CV01n Transactions....It works fine for .TXT file but other files it is not downloading coorectly and file is getting damaged

Hi, I am downloading DMS file using following code and the file contents are getting damaged and cannot be retieved back. I am also getting hard time to open a DMS file in seperate browser.
Can anybody please help me.
TYPES : BEGIN OF ty_ts_raw_line,
*                 line TYPE sdokcntbin ,
            line(2550) TYPE x,
           END OF ty_ts_raw_line.
DATA: ls_documentdata TYPE bapi_doc_draw2,
        lv_doctype TYPE   bapi_doc_aux-doctype,
        lv_docnumber TYPE bapi_doc_aux-docnumber,
        lv_documentpart TYPE bapi_doc_aux-docpart,
        lv_documentversion TYPE bapi_doc_aux-docversion,
        ls_return TYPE bapiret2,
        gt_bapi_doc_files2 TYPE TABLE OF bapi_doc_files2,
        gs_bapi_doc_files2 LIKE LINE OF gt_bapi_doc_files2,
        lo_nd_nd_cost_rate TYPE REF TO if_wd_context_node,
        lt_nd_cost_rate TYPE wd_this->elements_nd_cost_rate,
        ls_nd_cost_rate TYPE wd_this->element_nd_cost_rate,
        lv_string TYPE string,
        lv_temp TYPE string,
        lv_input_file_name TYPE string,
        lv_size TYPE i ,
        lt_bindata TYPE STANDARD TABLE OF ty_ts_raw_line," STANDARD TABLE OF zst_ts_raw_line,
        ls_bindata TYPE sdokcntbin,
        ls_drao TYPE drao,
        lt_drao TYPE TABLE OF drao,
        lt_files TYPE cvapi_tbl_doc_files,
        ls_files TYPE cvapi_doc_file,
        ls_api_ctrl TYPE cvapi_api_control,
        ls_message TYPE messages,
        lv_dappl TYPE draw-dappl,
        lv_filename TYPE char200,
        lv_filename_draw_filep TYPE draw-filep,
        lv_doc_succ TYPE c,
        lv_tabix TYPE sy-tabix,
        lv_char_tabix(5) TYPE c,
* get message manager
        lo_api_controller     TYPE REF TO if_wd_controller,
        lo_message_manager    TYPE REF TO if_wd_message_manager,
        lv_text TYPE string,
        lt_tabix TYPE STANDARD TABLE OF sytabix,
        lv_api_ctrl TYPE cvapi_api_control VALUE 'CV01N',
        lv_documentnumber TYPE draw-doknr,
        lt_drat TYPE TABLE OF dms_db_drat,
        ls_drat TYPE dms_db_drat.
CONSTANTS: lc_cst(3) TYPE c VALUE 'CST',
             lc_000(3) TYPE c VALUE '000',
             lc_00(2) TYPE c VALUE '00',
             lc_zng_test(8) TYPE c VALUE 'ZNG-TEST',
             lc_desc(11) TYPE c VALUE 'Cost Rate',
             lc_test(4) TYPE c VALUE 'Test',
*             lc_file_path(31) TYPE c VALUE 'C:\FAKEPATH\COST_RATE_TABLE.TXT',
             lc_x TYPE c VALUE 'X',
             lc_blank TYPE c VALUE '',
             lc_nd(2) TYPE c VALUE '&1'.
FIELD-SYMBOLS <ls_wd_assist_mt_input> LIKE LINE OF wd_assist->mt_input.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager.
* navigate from <CONTEXT> to <ND_COST_RATE> via lead selection
lo_nd_nd_cost_rate = wd_context->get_child_node( name = wd_this->wdctx_nd_cost_rate ).
* @TODO handle non existant child
IF lo_nd_nd_cost_rate IS NOT INITIAL.
    lo_nd_nd_cost_rate->get_static_attributes_table( IMPORTING table = lt_nd_cost_rate ).
ENDIF.
ls_documentdata-documenttype = lc_cst.
ls_documentdata-documentnumber = lc_cst.
ls_documentdata-documentversion = lc_00.
ls_documentdata-documentpart = lc_000.
ls_documentdata-description = lc_desc.
* ls_documentdata-
* ls_drat-dktxt = lc_desc.
* append ls_drat to lt_drat.
* clear ls_drat.
* lv_api_ctrl = 'CV01N'.
LOOP AT lt_nd_cost_rate INTO ls_nd_cost_rate WHERE row_index IS NOT INITIAL.
    lv_tabix = sy-tabix.
*           CALL FUNCTION 'CVAPI_DOC_CREATE'
*         EXPORTING
*           ps_draw              = ls_documentdata " wa_documentfiles
*           ps_api_control       = lv_api_ctrl
*         IMPORTING
*           psx_message          = ls_message
*           pfx_doknr            = lv_documentnumber.
**         TABLES
**           pt_drat_x            = it_drat.
    CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
      EXPORTING
        documentdata    = ls_documentdata
        defaultclass    = 'X'
      IMPORTING
        documenttype    = lv_doctype
        documentnumber = lv_docnumber
        documentpart    = lv_documentpart
        documentversion = lv_documentversion
        return          = ls_return.
    IF ls_return-type CA 'EA'.
      ROLLBACK WORK.
    ELSE.
      COMMIT WORK.
    ENDIF.
    LOOP AT wd_assist->mt_input ASSIGNING <ls_wd_assist_mt_input> WHERE row_index = ls_nd_cost_rate-row_index.
      CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
        EXPORTING
          buffer        = <ls_wd_assist_mt_input>-file_data
        IMPORTING
          output_length = lv_size
        TABLES
          binary_tab    = lt_bindata.
      lv_filename_draw_filep = <ls_wd_assist_mt_input>-filename.
      WHILE lv_filename_draw_filep CA '\'.
        SPLIT lv_filename_draw_filep AT '\'
        INTO lv_temp lv_filename_draw_filep.
      ENDWHILE.
      LOOP AT lt_bindata INTO ls_bindata.
        CLEAR ls_drao.
        ls_drao-orblk = ls_bindata-line.
        ls_drao-orln = lv_size.
        ls_drao-dokar = lv_doctype.
        ls_drao-doknr = lv_docnumber.
        ls_drao-dokvr = lv_documentversion.
        ls_drao-doktl = lv_documentpart.
        ls_drao-appnr = '1'.
        APPEND ls_drao TO lt_drao.
        CLEAR ls_drao.
      ENDLOOP.
      CONDENSE lv_input_file_name.
*      lv_input_file_name = 'Test.txt'.
      CALL FUNCTION 'CV120_DOC_GET_APPL'
        EXPORTING
          pf_file   = lv_filename_draw_filep
        IMPORTING
          pfx_dappl = lv_dappl.
      ls_files-appnr = '1'.
      ls_files-dappl = lv_dappl.
      ls_files-filename = lv_filename_draw_filep.
      ls_files-updateflag = 'I'.
      ls_files-langu = sy-langu.
      ls_files-storage_cat = 'SAP-SYSTEM'.
      ls_files-description = lv_filename_draw_filep..
      APPEND ls_files TO lt_files.
      CLEAR ls_files.
      ls_api_ctrl-tcode = 'CV01N'.
      CALL FUNCTION 'CVAPI_DOC_CHECKIN'
        EXPORTING
          pf_dokar           = lv_doctype
          pf_doknr           = lv_docnumber
          pf_dokvr           = lv_documentversion
          pf_doktl           = lv_documentpart
          ps_api_control     = ls_api_ctrl
          pf_content_provide = 'TBL'
          pf_http_dest       = 'SAPHTTPA'
          pf_ftp_dest        = 'SAPFTPA'
        IMPORTING
          psx_message        = ls_message
        TABLES
          pt_files_x         = lt_files
          pt_content         = lt_drao.
      IF ls_message-msg_type CA 'EA'.
        lv_doc_succ = lc_blank.
      ELSE.
        COMMIT WORK.
        lv_doc_succ = lc_x.
        CLEAR lv_text .
        lv_text = <ls_wd_assist_mt_input>-comments.
      ENDIF.
      CLEAR: ls_api_ctrl,ls_message,lt_files[],lt_drao[].
    ENDLOOP.
    IF lv_doc_succ = lc_x.
      ls_nd_cost_rate-dokar = lv_doctype.
      ls_nd_cost_rate-doknr = lv_docnumber.
      ls_nd_cost_rate-doktl = lv_documentpart.
      ls_nd_cost_rate-dokvr = lv_documentversion.
      ls_nd_cost_rate-comments = lv_text.
      MODIFY lt_nd_cost_rate FROM ls_nd_cost_rate INDEX lv_tabix TRANSPORTING dokar doknr doktl dokvr comments.
    ELSE.
      APPEND lv_tabix TO lt_tabix.
    ENDIF.
    CLEAR ls_nd_cost_rate.
ENDLOOP.
I am also having hardtime to show DMS file on browser.

Hi I've done DMS Creation like below code. Just check it .
      LS_DOC-DOCUMENTTYPE    = LW_DMS_APP-DOCUMENTTYPE.
      LS_DOC-DOCUMENTVERSION = LW_DMS_APP-DOCUMENTVERSION.
      LS_DOC-DOCUMENTPART    = LW_DMS_APP-DOCUMENTPART.
      LS_DOC-STATUSEXTERN    = LW_DMS_APP-STATUSEXTERN.
      LS_DOC-LABORATORY      = ' '.
CONCATENATE WD_THIS->LW_REQ-BUKRS LS_DMS-REQ_NO LS_DMS-CR_YR INTO LW_OBJKEY SEPARATED BY '\'.
      LW_DRAD-OBJECTKEY = LW_OBJKEY.
      LW_DRAD-OBJECTTYPE = 'ZAPR_REQ'.
      APPEND LW_DRAD TO LT_DRAD.
      LW_DRAT-LANGUAGE = SY-LANGU.
      LW_DRAT-DESCRIPTION = LS_STRIPPEDNAME.
      APPEND LW_DRAT TO LT_DRAT.
      CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
        EXPORTING
          DOCUMENTDATA         = LS_DOC
        IMPORTING
          DOCUMENTTYPE         = LF_DOCTYPE
          DOCUMENTNUMBER       = LF_DOCNUMBER
          DOCUMENTPART         = LF_DOCPART
          DOCUMENTVERSION      = LF_DOCVERSION
          RETURN               = LS_RETURN
        TABLES
          DOCUMENTDESCRIPTIONS = LT_DRAT
          OBJECTLINKS          = LT_DRAD.
*--------Creating DMS Document Using BAPI-----------------*
      IF LS_RETURN-TYPE NA 'EA'.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            WAIT = 'X'.
      LS_DRAW-DOKAR = LW_DMS_APP-DOCUMENTTYPE.
      LS_DRAW-DOKVR = LW_DMS_APP-DOCUMENTVERSION.
      LS_DRAW-DOKTL = LW_DMS_APP-DOCUMENTPART.
      LS_DRAW-DWNAM = SY-UNAME.
      LS_DRAW-DOKST = LW_DMS_APP-STATUSEXTERN.
      LV_STORAGE_CAT = LW_DMS_APP-STORAGECATEGORY.
      LS_API_CONTROL-TCODE = 'CV01N'.
      IF LF_DOCNUMBER IS NOT INITIAL.
        CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
          EXPORTING
            BUFFER        = LS_DMS_FILE-FILE_CTGRY
          IMPORTING
            OUTPUT_LENGTH = LV_SIZE
          TABLES
            BINARY_TAB    = LT_BINDATA.
        LOOP AT LT_BINDATA INTO LS_BINDATA.
          CLEAR LS_DRAO.
          LS_DRAO-ORBLK = LS_BINDATA-LINE.
          LS_DRAO-ORLN = LV_SIZE.
          LS_DRAO-DOKAR = LS_DRAW-DOKAR.
          LS_DRAO-DOKNR = LF_DOCNUMBER.
          LS_DRAO-DOKVR = LS_DRAW-DOKVR.
          LS_DRAO-DOKTL = LS_DRAW-DOKTL.
          LS_DRAO-APPNR = '1'.
          APPEND LS_DRAO TO LT_DRAO.
        ENDLOOP.
        CALL FUNCTION 'CV120_DOC_GET_APPL'
          EXPORTING
            PF_FILE   = LS_STRIPPEDNAME
          IMPORTING
            PFX_DAPPL = LS_FILES-DAPPL.
        LS_DRAW-FILEP = LS_STRIPPEDNAME.
        LS_DRAW-DAPPL = LS_FILES-DAPPL.
        LS_FILES-APPNR = '1'.
        LS_FILES-FILENAME = LS_STRIPPEDNAME.
        LS_FILES-UPDATEFLAG = 'I'.
        LS_FILES-LANGU = SY-LANGU.
        LS_FILES-STORAGE_CAT = LW_DMS_APP-STORAGECATEGORY. "'ZDMS_DI'.
        LS_FILES-DESCRIPTION = LS_STRIPPEDNAME.
        APPEND LS_FILES TO LT_FILES.
        CALL FUNCTION 'CVAPI_DOC_CHECKIN'
          EXPORTING
            PF_DOKAR           = LS_DRAW-DOKAR
            PF_DOKNR           = LF_DOCNUMBER
            PF_DOKVR           = LS_DRAW-DOKVR
            PF_DOKTL           = LS_DRAW-DOKTL
            PS_API_CONTROL     = LS_API_CONTROL
            PF_CONTENT_PROVIDE = 'TBL'
          IMPORTING
            PSX_MESSAGE        = LS_MESSAGE
          TABLES
            PT_FILES_X         = LT_FILES
            PT_CONTENT         = LT_DRAO.
        IF NOT LS_MESSAGE-MSG_TYPE CA 'EA' AND
               LF_DOCNUMBER IS NOT INITIAL.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
       ENDIF.
Regards,
Jack.

Renamed a .cp file but .swf file still uses old name

I tried finding where the original file name would be kept in
the .cp file. The Property window has the updated name, the Publish
uses the updated name. I checked using notepad and no matching
string found. I use notepad to view the generated .swf file and the
old .cp file name is still in there. From the robohelp project in
the multiMedia folder of swf files, the right click shows the edit
option. This seems to use swf's stored file name for the .cp file.
How can I correct this?
The Captive help indicated a movie file can be renamed by
simply using widows explorer, nothing else required.

Seens if you delete the old swf file before you generate the
new one the new swf file has the current .cp file name.

Office 2011 on Macbook: unable to open network shared files but local copies are fine.

All,
We have 3 users in our environment and only one person is having this issue. Accessing files from a shared location "\\servername\macbk$ gives an error such as:
"This file may be read-only, or you may be trying to access a read-only location. Or, the server the document is stored on may not be responding."
Copying the files locally open correctly.
We have investigated permissions, the share has the correct ACL permission (including everyone full). NTFS permissions on the folder are also set to everyone full. We've reinstalled Office 2011 and have tried Office Preview 2015. We've remapped the drive.
Other applications including text edit, Adobe, etc. open from the share just fine. This seems to be an issue only with OSX and Office, or vice versa.
Any help on this would be appreciated. Thank you.

Hi,
This forum is for general questions and feedback related to Outlook for Windows. Since your question is related to Office for Mac, I'd recommend you post your question to the forum for Mac:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Loading text files, but the file name is variable

I'm working on a project that will be converting loaded files to some format using an oracle table (external table or otherwise) the problem is that i need to trick the loader so that i dont specify the original file name. the already processed files shall be deleted basically. but how to tell the loader to grap the first file from directory (say using FIFO)wait until the load is done, spool the new format into another dir then load the second file. i was thinking of UTL_FILE in 9iR2 can RENAME a file. So, the external table could be based on
"current_file_to_process.dat" and you would frename a file to be "current".

Hi Paras,
Based on your description, it is not the VS IDE issue, if it is related to the SSIS, I suggest you post the issue in this forum here:http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlintegrationservices
, and there you would get better response.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Java.util.zip.ZipFile.entries() shows only 99 files but zip file is fine.

Similar Messages

Maybe you are looking for