Java version ?1.5.0_06? - attempting roll-back to this version

A customer of ours is having a problem submitting info to their bank. They have three users, one of whom is using Java version ?1.5.0_06?. This is the only one that works properly. The other two have version ?1.6.0_05? and this is causing problems ? they can only submit single payments and not batch payments. I have spent the last couple of hours trawling the internet, including Sun?s download pages ? with no luck. I cannot find a download for version 1.5.0_06. It may be that they will need to download an older version and then add 1.5.0_06 as an add-on ? but I?m just guessing.
Any light you anyone shed upon this would be much appreciated

Thanks but I did state the problem - it might be a bit vague - they can only submit single payments and not batch payments.
As to that archive link, I did visit that in my hunt but could not find the specific version - you couldn't give me a clue as to which could you? :) Is it this one?
http://java.sun.com/products/archive/j2se/5.0_06/index.html

Similar Messages

Data Services job rolling back Inserts but not Deletes or Updates

I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
I am not using the Transaction Control feature (because it just throws an error when I use it)
My issue is as follows.
Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or what I'm doing wrong/what my misconception may be?
Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
If you require more information, please let me know.

Hi Michael,
Thanks for your reply. Here are all the options on my source table:
My Rows per commit on the table is 10,000.
Delete data table before loading is not checked.
Column comparison - Compare by name
Number of loaders - 1
Use overflow file - No
Use input keys - Yes
Update key columns - No
Auto correct load - No
Include in transaction - No
The rest were set to Not Applicable.
How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
I can also try using the Auto correct load feature. I'm guessing "upsert" was a typo for insert? Where is that option?
Thank you very much!
Riley

What does SQL write to that allow changes to be undone or rolled back in case of a system failure?

What does SQL write to that allow changes to be undone or rolled back in case of a system failure?

What does SQL write to that allow changes to be undone or rolled back in case of a system failure?
Hello,
If i read your question correctly you are asking about how uncommited transaction are rolled back.For this, concept of transaction log came into picture.where first changes were first made to transaction log and then into memory .Before any change is made
to real data file change is made to trn log files so that if rollback comes it can see in log and rollback it.
I would suggest you to read Famous article by log which will explain you
http://technet.microsoft.com/en-us/magazine/2009.02.logging.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Invoicing - EA26 interval is failing/rolling back but no shortdump created

Hi
We're having intermittent problems with EA26. most recent example was last night.
The variant is set up to create intervals of 1000 accounts against 10 jobs. Interval 19 against job 3 is showing that it did no work in the job log counter.
However there were 121 invoices created in ERDK table for the accounts in that interval range.
There was no shortdump created, and none of the accounts in the interval are in the spool file for the job. It looks like when the failure happens the counters are all set to zero and the log entries are rolled back.
This is the 4th occurrence in the last 10 days, but its different account ranges each time, and it's not happening every night, so it's not like its the same account erroring over and over again.
I'm working on manually invoicing the next account with billing docs in the interval range, but in the meantime I was wondering if anyone else has had similar experiences.
Thanks
Astrid

Hi Bill
Thanks for the tips, I had already looked for shortdumps and there weren't any in the time range of this process.
I did inspect the logs for the job, and none of the accounts in the affected interval were in it, for either success or failure.
The problem seems to have resolved itself, all intervals have been completing sucessfully each night ever since.
It had happened 4 times in the space of 2 weeks, the last 2 after they did some virtualization changes, and since they got those stabilized, the problem hasn't re-occurred.
Just one of those things...
Cheers
Astrid

Transaction - the subprocess rolling back parent JTA

According to Oracle documentation,
"if the caller partner link specifies transaction=participate and the subprocess also specifies transaction=participate, the subprocess rolls back the client JTA transaction."
But what I experience is if I just set transaction=participate for the partner link alone (and not having transaction=participate in the subprocess), when the subprocess rolls back, it rolls back parent JTA transaction also.
In fact, if we have just transaction=participate for the partner link (and not having transaction=participate in the subprocess), then the rollback in either Parent or Subprocess, is rolling back both Parent and Subprocess.
Can somebody provide the exact usage of using transaction=participate at the subprocess level?
Thanks,
Joe

Joe,
You are seeing expected behaviour. Even though both flags are called "transaction" and both are set to "participate", they do different things.
By specifying transaction=participate on the partner link, you are instructing the subprocess to enlist in the transaction. When the subprocess starts, it will then enlist itself. That's all. Now if a rollback occurs, all participating processes will be rolled back.
If you specify transaction=participate at the process level, it has a different effect, and doesn't affect whether or not the transaction is rolled back or not. As I said in the previous paragraph, if the partner link specified transaction=participate, the subprocess will roll back if a rollback is issued, no matter what other settings you have.
So what effect does that setting have at the process level? According to the doc:
When transaction=participate, the process produces a fault that is not handled by fault handlers, which calls the transaction to be rolled back.
This is not exactly crystal clear, to me, anyway. In practice if this is set and your subprocess throws an unhandled fault, it triggers a rollback instead of throwing a fault as it normally would. This exception goes immediately back to the calling process since it is participating on the transaction as well.
If the property is not set, and the subprocess throws an unhandled fault, you get the normal behavior. Namely, the process will be flagged as faulted, and the calling process will wait until it gets a transaction timeout (no relation to the JTA transaction we're talking about here).
It's a simple test. Create two processes, then run it twice. Once with that property set, and one without.
The key is to remember that although they are both called "transaction=participate", the effect they have is very different. It was probably not a good move to use the same name and value like that. Hope this helps.
Regards,
Robin.

"Roll Back" functionality

Hi everyone,
SAP MDM offers change tracking. Unfortunately I read in this forum, that MDM does not seem to offer a roll-back functionality. In other word, there is no standard function for undoing changes. Is that correct?
Would I have to write my own roll-back tool then?
Best regards, Daniel

hi,
Can I use the Check In/Out functionality even if I do not intend to to any manual edits?
For example: if I perform an import which brough me corrupt data (because the source had corrupt data). Can I also use this roll back functionality?
Ans: yes you can use the checkin/checkout functionality. once the records are checked out, you can go for roll back.
Can I also roll back more than one import? In other words: assume I have run 3 imports since the beginning of the month. Can I roll back all 3 of them so that I have the data from the beginning of the month?
Ans: for all the 3 imports you have checkout records, select all those records and you can go for roll back.
hope this may help you,
Regards,
Srinivas

Since 3.6.16 upgrade last night, nearly every site freezes! How can I roll back?

Last evening, Firefox upgraded to 3.6.16 automatically. Since that upgrade, nearly every site fails to load completely, and Firefox freezes! News sites, Facebook, every thing I used to have access to! What is going on, and how can I roll back from this garbage upgrade?

Hmmmm, two days and several reboots later, everything now seems to be OK. In the words of Billy T James, "Api puckertif Ino..."...

How do I roll back the ASA image

I downloaded a new image to my ASA 5510 and found out up on reboot that the ASA doesn't have enough memory so I am booting to the "ciscoasa" prompt with no config. I still have my old image in disk0:. How do I roll back to this old image?

"downgrade" is the command. Instructions are here.

How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!

Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

How can I roll back a java update?

This morning we did our monthly take-down-the-server-run-all-the-software-updates, and it included "Java for Mac OS X 10.6 Update 16" Now our java software is totally hosed.
How do we roll back to the previous version of java?

We used Pacifist ( http://www.charlessoft.com/ ) to re-install the java Update14
This is shareware and he asks for $20. We are sending him $100!!!!
-- that's us doing the happy dance!!!
(We have Update15, but, a) apple has removed it from the support downloads site, and b) 16 came really fast after 15 -- so I suspect that 15 is broken somehow. The guessing game is a little annoying -- an article on the support page that would come up when you search for java for 10.6 update 15 saying that apple has removed the update and don't install it if you downloaded it would be, well, courteous!)
Note -- this seems to have worked just fine to clean up whatever update 16 broke for us, but I suspect that we could have used pacifist to install updates 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and then 14 and been really really likely to undo whatever bad thing update 16 did.
Another note... Got into this mess because I was trying to minimize downtime. I've never had a problem with a java update before so I got greedy/sloppy. Sure plenty of OTHER people have had problems with java updates, but, well, what is that old saying?
Smart People learn from their mistakes. And Really Smart People learn from other people's mistakes!
So, if you can't be Really Smart, at least be Smart!

Upgraded Firefox won't play games in Facebook now. Updated Adobe as well, Java rolled back

New Firefox won't allow game play at Facebook. Updated Adobe Flash Player, Java rolled-back to 1.0 because your new version won't work with current Java. Games like Zuma Blitz or Bejeweled are affected

Java is working properly. Still not loading games

How do I get the old java version (the one that worked) back

I just did the lastest OSX upgrade. OSX 10.7.   It did a few things to Java.
1) It removed the Utility to select a Java version to run (umm, so how am I supposed to pick Java 1.5 for some old Java 1.5 apps?)
2) It made some Java 1.6 applications that I need on my desktop to do my job not work.   Anyone heard of ScrumWorksPro.? Barfing on a laf.jar that's missing from the new 1.6 version
I can't seem to 'downgrade' back to the version that worked.   Does anyone have the zip file of the old version of Java that worked? If so, where do I unzip it to.   I'm fine with launching my app from a terminal, I just need the jvm files so I can. Looks like the installer (or my attempts to get rid of the new version by doing rm -r on every Java dir I could find) has gotten rid of the old version of Java.   I just can't seem to find the installer or the zip files to get the old version.
Help!

In Firefox 4 by default the Stop, Go and Reload (refresh) buttons are combined and attached to the right hand edge of the location bar.
When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
If you want separate buttons, Control-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar

How can I roll back to an earlier version of OS 7 software

Can anyone advise me on how to roll back to an earlier version of OS 7?
I installed v 7.0 Bundle 2406 a few weeks ago and have had constant synch problems since. Most of these I have been able to fix by deleting 'problem' calendar appointments I have identified on the synch log. However, I have no idea how to solve the latest problem (see below). So I give-up and now want to roll back to ealier version which worked fine.
BlackBerry Torch 9860 software v 7.0 Bundle 2406. Windows 7
'An error has occurred during an attempt to access a device database record.'
Details below.
08:46:51.759 Engine waiting for user input - WPF message event raised for messageId 15003 Read 310 records
08:46:51.762 Engine working - message event complete for messageId 15003 Read 310 records
08:46:51.859 CBBTransBase::GoToRecord - Failed to get record FFFFFB45
08:46:51.860 Error Information: 18008 (00004658) (KnownErrorWithLocalizedText), Description: An error has occurred during an attempt to access a device database record., File: .\BBTransBase.cpp, Line: 736
08:46:51.860 CRSyncUtil::GetTranslator : FeedProfileShim2Trans (Loaded Trans) BlackBerry
08:46:51.860 CRSyncUtil::FeedProfileShim2Trans : returns 0
08:46:51.860 CRSyncUtil::LogFatalTransError : 'GoToRecord()' API of 'RimBB' translator for 'Contacts' application returned empty error
08:46:51.860 CBBTransContact::Close - Clean up temporary attachment files for contacts
08:46:51.862 CBBTransBase::Close - Mode: 4
08:46:51.862 CBBTransBase::Close - Committing change-log
08:46:51.862 CBBTransBase::Close - Save device database source information
08:46:51.976 CBBTransBase::Close - Close device database
08:46:51.976 CBBTransChangeLog::Close - Close change log db. Record count: 474. Db File: C:\Users\Bob\AppData\Local\Research In Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Translators\RimBB\Contract{8BCB53647E24F3BB61A8E73C4FDAB}.adt
08:46:51.990 Enter COLTransBase::Close - Mode - 4
08:46:51.991 End Sync with Error 2
Solved!
Go to Solution.

Hello BobB10 and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having issues with your BlackBerry® Torch™ 9860 smartphone.
It is not recommended to downgrade your software, however, if you wish to do so you will need to consult your mobile carriers download site at www.na.blackberry.com/eng/support/downloads/download_sites.jsp and see if the previous software version is posted. If so, download and install it to your computer then use the BlackBerry® Desktop Software to install the older software version.
Hope this answers your question.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HT202643 OK so I rolled back to Java 1.6 per the instructions but!!!

OK so I rolled back to Java 1.6 per the instructions but now the Java icon doesn't work in system pref's anymore. Not sure if that will cause a problem but it would be nice if that button worked again. Is there a fix for this?

Thanks for the heads up Kappy. Do you know how to remove the button from Sys Pref's? The newer version of Java was saved per the instructions so I guess the Icon will come back if necessary when I upgrade again. I rolled back for PhpStorm IDE which doesn't seem to like the most recent version of Java from Oracle.

Curve 8330 - OTA Update, now says rolling back java and turns off and on

So, I'm pretty sure my phone is fried - thanks to the wireless software update that my phone told me to download yesterday from Blackberry.
Little update icon pops up on the screen telling me that there's a software upgrade of high importance so I tell it to download over the air. About half an hour later, my phone starts flashing and comes up with a quick screen that says "rolling back java" with a status bar that stays at 99% and then power cycles and does the same thing. I had to take the battery out - it's power cycling every minute at least. It won't do anything else, and my blackberry desktop software doesn't recognize it. I left the battery out overnight so the power cycling didn't drain the battery and as soon as I put the battery back in, it just goes back to its little java msg and power cycling.
Any ideas? I will be taking it in to Telus later today. I'm assuming that it will have to be sent away and re-flashed and I will have lost everything on it.
Big thanks to Blackberry for such an awesome upgrade. Twits.
Solved!
Go to Solution.

You could have lost everything on it, but let's see what we can do first.
1. NEVER do the wireless upgrages without first doing your own manual backup using Desktop Manager. RIM needs to get that right, and I hope they are listening.
2. Try this on your device:
If your BlackBerry stays powered off with a black screen, follow the instructions below. The only indication of life might be the blinking red LED light in the top corner. Nothing seems to wake it up and Desktop Manager doesn't recognize any device is connected.
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Java version ?1.5.0_06? - attempting roll-back to this version

Similar Messages

Maybe you are looking for