JAVA3D versions and runtime errors

hi, everybody:
I just begin to program in java3d today and met some problems.Now I share you with my solution(s) and wish every author can end his question with the final solution in the forum.
OS: Windows XP
J2SDK: 1.4.1_02,1.4.2._01
DirectX: 9.0 update
Java3D: 1.3.1
Error: Fail to Create Vertex Buffer---D3DERR_INVALIDCALL
Solution: uninstall java3D1.3.1, install java3D1.2.1_04
wellcome to add more information to this topic.

A better solution might be to switch to the OpenGL version
of Java 3D.
-Paul

Similar Messages

I went to download the latest i Tunes update but somehow it went wrong and I ended up removing i Tunes from my system and re installing it but I can't get it to reinstall. I keep getting error massages Error 7(windows error 1114) and runtime error R6034,

I attempted to download the latest i Tunes update but somehow it all went wrong and I have ended up trying to reinstall iTunes but it does not work. I keep getting error messages-Error 7 (windows error 1114) and Runtime error-" R6034 an application has attempted to to load the runtime library incorrectly". Help what do I do now?

Hello there, tulchan.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

OpenPS4MSP Version 2.02 and Runtime error 429

Hi,
I don't have experience of intergration Project System(PS) & MS Project. I have done following steps and got error message Runtime error 429
1. Install fully SAPGUI on client pc ok. sapgui and server IDES work well
2. Install OpenPS4MSP Version 2.02 on client PC ok.
3. Open Connection from OpenPS4MSP to server ok
4. Menul -> OpenPS --> Download Project: Display a dialog, Choose Project Definition, Click on ... button, And then the error message "Runtime error 429" occurs
Please Help!!!
Thank you very much
Long
Message was edited by:
Long Nguyen

I have the same error to.... sometimes thats not happend and show me a mensage to insert the note 166870... and that note are for version 4.5 and I´m working at ECC 6.0.
Someone can help ?

Verify operation failed and Runtime Error While using Adobe Reader 10.1.2

We have installed Adobe reader 10.1.2 on Windows Servers 2008 and user are accessing its using Citrix.When users open PDF files they are getting message "Verify Operation Failed" and also getting error "Runtime Error"
even on one server we updated the version to 10.1.3 but still they are getting same error.
Pdf files open up but after multiple attempt..
Error are provided below

Hi, I have been using Citrix on Server 2008 for quite soemtime. And have not seen any such issues with Reader 10.1.2 and 10.1.3
Can you provide the event viewer log ? Also is the same issue seen while opening PDF in the Citrix Server ? Or it is mainly seen while Citrix Users accessing the published Reader app via Citrix Web URL ?

Rode podcaster and runtime error.

hello, i hope someone can help me with this problem. i purchased adobe auditon 3.0 because i do podcasting and i needed a program that would support 2 usb microphones. well i have no problem getting one of my microphones to record (an MXL usb .006) but when i plug in my rode podcaster and try to use it (and this is with the MXL unplugged, so i havent even tried to use multiple usb mics yet) it gives me a error that reads "microsoft visual C++ runtime library" as the header, then it reads "runtime error! program:...rogram files (x86)\adobe\adobe audition3.0\audition.exe
this application has requested the runtime to terminate it in an unusual way. please contact the application 's support team for more information."
the laptop is running windows vista, the 64 bit version.
so can anyone give me an idea what to do next?

>and i have no clue what you mean when you say use the wdm usb driver rather then the asio ones, so any advice there would be appreciated.
Well, this is the simplest explanation I can manage that explains the important principles:
WDM drivers are the ones that Microsoft intend to work with the OS (Windows Driver Model), and they allow for the use of multiple spund devices - wherever and however they are attached. But, these drivers have inevitably got a higher latency (delay introduced in processing signals), because they sit nearer to the top of the processing heirarchy in the OS. ASIO gets around the latency problem by short-cutting most of the OS, and allows software using its engine to talk more or less directly to your sound device - singular. To use any more than a singular device would require the arbitration that the OS would have to provide, thus destroying the point of doing this in the first place.
What ASIO4ALL does is to take the ASIO-based stream from Audition, or any other software using the same engine, and convert that back to a WDM-based internal protocol. It is bi-directional, so signals coming in (like from your USB mics) can be converted from their WDM format into ASIO for Audition, as well. As a consequence, ASIO4ALL can redirect a multi-channel stream to different devices, and can also take multiple input streams from them as well, combining them into a concurrent ASIO stream. There are several penalties to be paid though - the increased latency is one, and also you could
potentially run into sync problems, but not with the application you have in mind, I think.
There is one important bit in the ASIO4ALL FAQ that you should note, but a comment on it is needed:
>After some initial troubles with earlier revisions, the driver now appears to work just fine with numerous USB devices. one thing to not do, I mean: not ever! is to check the DMA box with USB devices. If you do not need all the additional software gizmos like EAX, EQ, Fake3D-Whatever... it is recommended that you _not_ install the drivers shipped with your USB audio interface. Windows has a built-in generic USB audio driver that works with most devices. Thus, if you want to have honest, no-nonsense, low-latency audio playback/recording with your USB audio interface - by all means: stick with the Windows driver! This is especially true for consumer grade stuff, where you can be assured that the drivers shipped with it are most likely 'consumer grade' as well.
One of the problems with USB mics is that you may well need to install at least the control applet for it, otherwise it
may not be usable sensibly at all. But, USB mics vary - so what you would need to do in any given situation, I can't comment on. In the past though, it's been pretty apparent that without the control applet, at least some of them have no sensible gain control or routing. But I would emphasise that this is very much a YMMV situation.
>i freely admit i need to do more research and reading on the software, but i have been told by people using multiple usb mics that this is what they used, or at least earlier versions of adobe audition.
That would be true. The earlier version referred to would probably be 1.5, which was the last version to use the built-in WDM system for recording, although all earlier versions could do this too, at least in principle. I believe, though, that there were other difficulties recording from USB sources with earlier versions, so all bets are off unless you've actually tried what you want to do with a specific hardware/software combination and actually
know it works.

Just tried to install update to iTunes and keep getting error statements. The errors statements read: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114) and Runtime error - Program: C\Program files (x86)\iTunes\iTun

I just tried to install the iTunes update 11.4.1 and keep getting error messages. I have never had this issue before over many years of using iTunes and getting updates to the software. I have removed the iTunes from my computer and reinstalled it but keep getting the errors. Here are the error statements: "Runtime error: Program: C:\Program Files(x86)\iTunes\iTunes.exe; R6034; An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

SAP Query and runtime error CREATE_OBJECT_CLASS_NOT_FOUND

Dear ABAP gurous,
I have created a query connected to an infoset. It worked fine. When I made a minor change to the infoset (checked, saved and generated afterwards) I couldn't run the query. Now, the problem is, when I run the query, the ABAP runtime error occurs:
Runtime Errors CREATE_OBJECT_CLASS_NOT_FOUND
Except. CX_SY_CREATE_OBJECT_ERROR
Can somebody tell me what causes the problem? Did I miss to do something after introducing this minor change to the infoset?
Thank you in advance and regards
Rafal Kosinski

In the infoset I had tables join (FEBKO+T001) and additional field group. For the field group I defined a field for which a code was created (a function module call). It worked for this setup.
Then, I just made a change in the code: in the function module call, I changed
sy-datum to febko-azdat for parameter DATE of the function module.

Blank Screen Simulation and Runtime Error 'DATA_BAD_REFERENCE'

Hi Gurus,
I manage to create eCATT for ID creation using TCode SU01 earlier and it works fine - so HAPPY :). Then, I try to develop another eCATT for indirect roles assignment using Tcode PP01 > Position > Relationship B007: AG Role.
However, I'm stuck at the Screen Simulation step to insert the 'Import Parameter' whereby the recorded screen seems to be blank (boxes without text) and when I try to proceed using the 'Next Screen' button, I got the Runtime Error message 'DATA_BAD_REFERENCE'.
Am I missing something here? Or do I need to consult ABAPer to debug the error? Appreciate your guidence on this matter as I'm very very new to eCATT development.
Regards and millions thanks !

Hi,
I have seen the similar issue posted by other users in this forum earlier. But no luck on the solution. I would recommend to insert the import parameter into the interface manually instead of using the simulation screen.
Fields having mode u2018Su2019 (Set) under each dynpro of the command interface contain some value that you entered during the recording. This is the value one needs to parameterize as Import Parameter. so that with next run a new set of data will be passed to the recording. Change the value of the VALIN for these fields and replace with your import variable name.
Hope this will solve your problem.
thanks
Venkat

How can I downgrade my Java version and Runtime Environment to 6?

Hi, thanks for reading this in advance:
I have a couple problems. Ever since Java Preferences was removed in one of Lion's updates I have been having trouble with java.
How do I downgrade my java and runtime environment to java 6?
When I go into terminal, and type java -version, this is what I get:
java version "1.7.0_09"
Java(TM) SE Runtime Environment (build 1.7.0_09-b05)
Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode)
How do I downgrade the "java version" to 6 and how do I downgrade the SE Runtime Environment to 6?
I accidentally installed 7 a couple days ago and I've been having trouble with some applications.
Thank you so much.

Dear Minionsman and everyone who reads this. I was so happy when i downgraded and i wanted to share it to all, I have found out why it says this in terminal
java version "1.7.0_09"
Java(TM) SE Runtime Environment (build 1.7.0_09-b05)
Java HotSpot(TM) 64-Bit Server VM (build 23.5-b02, mixed mode)
and why it says something different on java tester
Its because java 7 blocks every java version below it.
How do you downgrade?
Well all you do is delete a few files
INSTRUCTIONS BELOW
1.Open Terminal
2. Enter these commands
sudo mkdir -p /Library/Internet\ Plug-Ins/disabled
sudo mv /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin /Library/Internet\ Plug-Ins/disabled
sudo ln -sf /System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPlugin2_NPAPI .plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
sudo ln -sf /System/Library/Frameworks/JavaVM.framework/Commands/javaws /usr/bin/javaws
3.
Go to /Library/Internet Plug-Ins/ and delete the JavaAppletPlugin.plugin bundle.
4.
Go to /System/Library/Java/JavaVirtualMachines/ and delete anything whose name starts with jdk1.7.0 or says Java 7 or something similar.
5. now go to terminal and type
java -version
6.it should say something like this
java version "1.6.0_35"
Java(TM) SE Runtime Environment (build 1.6.0_35-b10-428-11M4508)
Java HotSpot(TM) 64-Bit Server VM (build 20.10-b01-428, mixed mode)
<Edited by Host>

Soft thinks and Runtime Error Printing issue!

Whenever printing a document these 3 issues (either 1 or both or all 3 will occur)
When printing with wireless printer C4580 (Windows Vista 32 Bit)
1.It will not recognize the wireless printer and say that it is disconnected.
2. When printing a document sometimes it will not print and a info bubble will pop up on the bottom of the right side of the screen saying "Soft thinks program error" and it says i have to contact the manufacture.
3.EVERYTIME when printing, it will print the document, then this information screen will come up stating:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C\Windows\SMINST\BLService.exe
This application has requested Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
If anyone has any info to that can help please let me know...especially for #3!
Thanks

Follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 and note to run as admin

Need help with Photoshop and Runtime Error

Runtime Error Photoshop & MS Visual C++ WIN7 32bit Photoshop will appear to launch then dies with a ('MS Visual C++ Runtime Error!' = Application requested the runtime to terminate it an unusual manner. Contact application's support team for more information).
Anyone have clue as to how this can be fixed and not lose all currently loaded brushes, styles, actions, etc?

You need to provide much more info, like exact system specs and crash details:
Working with your Operating System’s Tools
Also hold down Ctrl+Alt+Shift during program startup to reset the prefs to defaults. If the error is caused by damaged presets, actions or whatever, then you will lose some of that, otehrwise they will be untouched.
Mylenium

Java Update won't work and runtime error

I have 2 problems.
1. First, I am running Windows Vista and Internet Explorer 7. I also use Firefox 2.0.0.11.
I have Java SE Runtime Environment 6, but when I try to download Update 3, this is the message I receive on both IE and Firefox:
*"This installation package could not be opened. Verify that the package exists and that you can access it,*
*Or contact the application vendor to verify that this is a valid Windows Installer package."*
2. Second, this is my problem when I try to play Text Twist on Yahoo Games: On IE, I get a message stating that the Runtime has requested that the program terminate it in an unusual way. Then IE closes.
On Firefox, the game simply never loads.
When I first got my computer with Windows Vista, I was able to play this game. I don't know what's changed to cause this error to happen.
If any one can help me, I will appreciate it very much.
Thank you,
Joy

I guess I posted to the wrong forum. {embarrassed}
I found the solution for my problems in the forum for java errors. It worked. Thank you.
>
I had this problem with JRE 1_5_0_09 - after beating it to death, I finally got it.
Note that JRE did NOT appear in my add/remove programs list - also it did not appear when I ran the windows install clean-up utility msicuu2.exe.
However, when I browsed to
Documents and Settings\User\Local Settings\Application Data\Sun\Java
I found a folder named jre1.5.0_09 containing the MSI file which installed JRE perfectly.
I am not sure if everyone with this problem will have the JRE file there, but I imagine that if it's NOT there, placing it there from another system and then running it might also work.
good luck.

Installed new version and now error message...HELP!!!

I installed the new version of itunes and every time I try and open itunes as its accessing the itunes store, I get an error message telling me
" I tunes has encountered a problem and needs to close". I can not open itunes at all anymore ever since the update...please someone help!!!

Im getting ModName: webkit.dll
and ModVer: 5.33.18.1
Taken at face value, you've got trouble with an Apple Application Support program file. (iTunes requires a properly functioning Apple Application Support in order to work correctly.) So for that one you'll need to uninstall both iTunes and Apple Application Support and then reinstall iTunes (which normally would reinstall AAS).
I also like to take a few other explicit precautions along the way (just in case). See the following post for instructions:
http://discussions.apple.com/thread.jspa?messageID=11901253&#11901253
(Although those instructions are for a 32-bit Vista, they're pretty much identical for XP. Just read "Uninstall a program control panel" as "Add or Remove Programs control panel" and "Computer" as "My Computer".)

Exchange 5.5 Portlet, versions, and CDO Error

I am unable to get the Exchange 5.5 Portlets to work. I am
running Portal 3.0.9.8.0, Exchange Server 5.5 SP3 (does it need
to be SP4?), and IIS 5.0 on Win2K. The Exchange Server is
running on another box (WinNT SP5).
When running the test.asp file I get the following:
CDO Version: 1.21
Collaboration Data Objects error '000043ed'
[ - [(80004005)]]
/ExchangePortlets/test.asp, line 33
I added the line reporting the CDO version this machine is using
(it came from the MS Outlook XP install) Would this cause
problems seeing it is slightly newer then the CDO library on the
Exchange server?
Anyway, I continued through the instructions despite the above
error and added the portlet, however it simply reports the "User
authentication failed. Please..." message all the time,
regardless of the credentials entered.
Another note, when attempting Stage 5 step 2 of the
instructions, Login to the Exchange External Application, after
I enter the details I get a plain looking form with all the
field boxes again, empty. I had seen someone else mention this
behaviour but there was no solution.
Any help out there?

I've found out what's causing
[Collaboration Data Objects - [MAPI_E_NOT_FOUND(8004010F)]]
to appear in test.asp. (By the way, if you are getting this in
test.asp, your portlets will not work).
EXPLANATION: When an ASP page uses CDO to logon to an Exchange
mailbox, IIS creates a temporary .mmp file to store
necessary profile information. However it stores the temporary
file in the directory where Windows is installed. Users who do
not have permissions for that directory will not be able to
access the .mmp file and they will get the
MAPI_E_NOT_FOUND error.
FIX: Configure the Windows Messaging Subsystem to store the
.mmp file to a directory that users have access to.
- Start Registry Editor (regedt32.exe) on the machine that has
IIS.
- Go to the following key:
HKEY_LOCAL_MACHINE/Software/Microsoft/Windows Messaging
Subsystem
- On the Edit Menu, click Add Value.
- Value Name: ProfileDirectory
- Data Type: REG_SZ
- String: Path to the directory you want the .mmp files to be
created in. E.g., C:\temp
- Make sure everyone has change permissions for the temp
directory.
James

How to see the compilation and runtime errors in NW 2004s

Hi
I have developed some J2EE application and deployed it in a NetWeaver 2004s, some problems has occurred when I try to run this application.
Where can I see the errors stacktrace for J2EE applications ? Is there any log ? I have already checked the std_server0.out and I didn´t find it there.
By the way.. my SAP NetWeaver Application Developer is not validating the JSP syntax after I save the JSPs.

Hello Michel,
The exceptions will appear in ./j2ee/cluster/server0/log/defaultTrace.<#>.trc provided that the application is written to use the SAP logging API.
Regards,
Nathan

JAVA3D versions and runtime errors

Similar Messages

Maybe you are looking for