JavaFX linux version
Hi!
I know it's getting a bit annoying, but I would really like to know.
Is there an (semi)official place, where I can find information about the progress of the linux version of JavaFX ?
(I have the mac version of the sdk, so it's enough for a start, and I don't plan to use rich media yet, only the basic graphics functionality, and it works fine in linux too)
I can wait of course, but now everyone who uses linux is in the dark except a few sentences here and there, that it's on the way.
+1
I'm not sure where sun gets it OS usage statistics from for its developer base :-) I want very VERY much to use OR at least have a place to check on the status of the Linux version of JFX as its being (allegedly) developed as a priority. For Petes sake say ANYTHING about it on the downloads page other than: "JavaFX 1.0 is not currently supported on your operating system. We encourage you to try JavaFX on Windows XP, Windows Vista or Mac OS X. (See system requirements for details.)".
Suggestion: Replace that message (which translates to: "Eff Linux") with something like: "Were hard at work on a version of Java FX for Linux, please check back regularly or register for our Java FX insiders mailing list". Feel free to use that copy!!! See this way you're not just pis*ing off the worlds most talented development community.
Similar Messages
-
Setup PeopleTools 8.53 Database Issue (Linux Version)
Folk,
Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Dabase 11gR1. OS is Oracle Linux 5.
I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully. But when set up PeopleTools8.53 Database in the way as below,
I get an error message and cannot proceed.
[user@localhost PT8.53]$ pwd
/opt/PT8.53
[user@localhost PT8.53]$ ls
AppBatchDBORA dict psconfig.sh setup
AppBatchDBWebExe etc PSEMAgent sqr
appserv fonts PSEMViewer src
bin jre readme.txt toolsadmin.sh
cblbin jre1.7.0 scripts utility
ccr log sdk web
class PeopleTools_InstallLog.log SecurityAddIns
data peopletools.properties secvault
[user@localhost PT8.53]$ ./psconfig.sh
[user@localhost PT8.53]$ cd setup
[user@localhost setup]$ ls
ccr pscbl.mak PsTestFramework
Client pscbl_mf.mak pstuxftp.txt
dashboard PsCIA psvccrt
dbcodes.pt psdb.sh ptib.jar
dotnetredist psdmtx.cfg readonly.txt
endorsed psmkreadonly.sh searchCobolPgms.ps
NOTESDB psmkwritable.sh soap
nVisionDrill PsMpCrystalInstall unicode.cfg
OpenXmlSDK PsMpDbInstall unpack_jre.sh
parmfile PsMpPIAInstall UPGCOMPVIEWER
peopletools_ab_reg.cfx PsMpWebAppDeployInstall WebCenter
pkgs PSODBC writable.txt
PsCA psrun.mak
[user@localhost setup]$ cd PsMpDbInstall
[user@localhost PsMpDbInstall]$ ls
InstData setup.bat setup.sh
[user@localhost PsMpDbInstall]$ ./setup.sh
Setting temporary directory /tmp/IA.6736
Executing setup.linux LAX_VM /opt/PT8.53/jre/bin/java -DCOMP_NAME=localhost.localdomain -DPS_UMASK=0002
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
===============================================================================
Peoplesoft Database Configuration (created with InstallAnywhere)
Preparing CONSOLE Mode Installation...
===============================================================================
Welcome
Welcome to the PeopleSoft Database Configuration Wizard 8.53
This Wizard will assist you in configuring and loading a PeopleSoft database.
PRESS <ENTER> TO CONTINUE:
===============================================================================
Error
You must run psconfig.sh (. ./psconfig.sh) under your PS_HOME directory before
starting the Database Configuration Wizard.
PRESS <ENTER> TO ACCEPT THE FOLLOWING (OK):
[user@localhost PsMpDbInstall]$
As you see the above, I have run ./psconfig.sh in the directory /opt/PT8.53 and then run ./setup.sh in the directory /opt/PT8.53/setup/PsMpDbInstall.
but get the error message:
"You must run psconfig.sh (. ./psconfig.sh) under your PS_HOME directory before starting the Database Configuration Wizard."
I have run the 2 commands ./psconfig.sh and ./setup.sh in root but get the same error message.
My question is: Does PeopleTools8.53 Linux Version have a problem ? How to solve the issue ?
Thanks.Folks,
Hello. Thanks a lot for replying.
. ./psconfig.sh has gone through. Now, I get new issues as below:
[root@localhost PsMpDbInstall]# pwd
/opt/PT8.53/setup/PsMpDbInstall
[root@localhost PsMpDbInstall]# ./setup.sh
Setting temporary directory /tmp/IA.30567
Executing setup.linux LAX_VM /opt/PT8.53/jre/bin/java -DCOMP_NAME=localhost.localdomain -DPS_UMASK=0022
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
===============================================================================
Peoplesoft Database Configuration (created with InstallAnywhere)
Preparing CONSOLE Mode Installation...
===============================================================================
Welcome
Welcome to the PeopleSoft Database Configuration Wizard 8.53
This Wizard will assist you in configuring and loading a PeopleSoft database.
PRESS <ENTER> TO CONTINUE:
===============================================================================
Please enter an installation location or press <ENTER> to accept the default
(DEFAULT: /opt/PT8.53):
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Note: If you have installed PeopleSoft Applications outside PeopleTools PS_HOME
then choose the PeopleSoft Applications home PS_APP_HOME, else leave the
default PS_HOME.
Choose the directory where you previously installed PeopleSoft Applications,
commonly known as PS_APP_HOME. or press <ENTER> to accept the default
(DEFAULT: /opt/PT8.53):
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
For a database platform of 'Oracle', are you installing a:
1- Non-Unicode Database
->2- Unicode Database
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
Oracle - UNICODE
===============================================================================
Select Character Set:
->1- AL32UTF8
2- UTF8
To select an item enter its number, or 0 when you are finished [0] : 0
Database Create Type:
->1- PeopleTools System
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Select PeopleSoft Application:
->1- PeopleTools System Database - US English
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Specify the directory path for 'sqlplus' [/products/oracle/9.2.0/bin]: /home/user/OracleDB_Home/bin
Specify the location for ORACLE_HOME [/products/oracle/9.2.0]: /home/user/OracleDB_Home/bin
Location of modified scripts: /opt/PT8.53/modifiedscripts
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Do you want to create a new SID or use existing one?
->1- Create new SID
2- Use existing SID
To select an item enter its number, or 0 when you are finished [0] : 2
Do you want to create a new SID or use existing one?
1- Create new SID
->2- Use existing SID
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Oracle SID [PTSYS]: DB1
DatabaseName [PTSYS]: PT853
Mount Point 1( for SYSTEM and REDO LOGS file in createdb.sql, ex: NT 'C' ,
UNIX 'u01') [c]: u01
Mount Point 2 ( for PSTEMP and PSDEFAULT file in utlspace.sql, ex: NT 'C' ,
UNIX 'u01') [c]: u01
Mount Point 3 ( for all files in xxddl.sql, ex: NT 'C' , UNIX 'u01') [c]: u01
Enable AutoExtend for Peoplesoft Tablespaces?
->1- Yes
2- No
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Peoplesoft owner ID (ex: 'SYSADM') [SYSADM]: SYSADM
Peoplesoft owner password (ex: 'SYSADM') []:
Peoplesoft owner password Re-type []:
Peoplesoft connect ID [people]: people
Peoplesoft connect password []:
Peoplesoft connect password Re-type []:
Peoplesoft default tablespace (ex: 'PSDEFAULT') [PSDEFAULT]: PSDEFAULT
Location of init.ora file complete path
[/home/user/OracleDB_Home/bin/dbs/initDB1.ora]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 2
===============================================================================
Oracle SID [DB1]:
DatabaseName [PT853]:
Mount Point 1( for SYSTEM and REDO LOGS file in createdb.sql, ex: NT 'C' ,
UNIX 'u01') [u01]:
Mount Point 2 ( for PSTEMP and PSDEFAULT file in utlspace.sql, ex: NT 'C' ,
UNIX 'u01') [u01]:
Mount Point 3 ( for all files in xxddl.sql, ex: NT 'C' , UNIX 'u01') [u01]
Enable AutoExtend for Peoplesoft Tablespaces?
->1- Yes
2- No
To select an item enter its number, or 0 when you are finished [0] :
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :
===============================================================================
Please enter the Appserver User and Password for your database.
Appserver User []: tlisten
Password []:
Re-type Password []:
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Please enter the Webserver User and Password for your database.
Webserver User : PTWEBSERVER
Password []:
Re-type Password []:
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Choose whether to enable or disable all other user profiles in your database.
->1- Disable
2- Enable
To select an item enter its number, or 0 when you are finished [0] : 2
Choose whether to enable or disable all other user profiles in your database.
1- Disable
->2- Enable
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Choose whether to set the password same as the OPRID (user) or a different
password (a global password, same for all OPRIDs).
->1- Set the password same as OPRID
2- I would like to set a different password
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Select Base Lanaguage
->1- ENG - US English
To select an item enter its number, or 0 when you are finished [0] : 1
Select Base Lanaguage
->1- ENG - US English
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Pre-Installation Summary
Please Review the Following Before Continuing:
Product Name:
Peoplesoft Database Configuration
Install Folder:
/opt/PT8.53
Apps Install Home:
/opt/PT8.53
Database Platform:
Oracle - Unicode
Oracle SID:
DB1
Application:
PeopleTools System Database - US English
Database Name:
PT853
Please type 'back' to go to previous panels
PRESS <ENTER> TO CONTINUE:
===============================================================================
Installing...
[==================|==================|==================|==================]
[------------------|------------------|------------------|------------------]
===============================================================================
Please Wait...
Executing.. /opt/PT8.53/modifiedscripts/psadmin.sql.
===============================================================================
Please Wait...
Executing.. /opt/PT8.53/modifiedscripts/connect.sql.
===============================================================================
Executing DM: -CT ORACLE -CS localhost.localdomain -CD PT853 -CO SYSADM -CP
SYSADM -CI people -CW people -FP /opt/PT8.53/modifiedscripts/dbsetup.dms
Console Mode: true
Initializing Data Mover ... please wait
Console DM Mode: /opt/PT8.53/bin/psdmtx /opt/PT8.53/setup/parm1
Error: unable to terminate process
ExitCode: 127
Error: true
===============================================================================
Error
The following error occurred while running data mover .
Error: File not found: /opt/PT8.53/scripts/pt853ora.dms
Please select OK to exit installer.
PRESS <ENTER> TO ACCEPT THE FOLLOWING (OK):
===============================================================================
Install Complete
The installation of Peoplesoft Database Configuration is complete, but some
errors occurred during the install.
Please see the installation log for details. Press "Done" to quit the
installer.
PRESS <ENTER> TO EXIT THE INSTALLER:
[root@localhost PsMpDbInstall]#
As you see the entire installation process above, the Installer cannot initialize Data Mover. I have run dbsetup.dms seperately, it cannot run. The 2 files psdmtx and parm1 cannot run.
My questions are:
First, how to get to Data Mover Bootstrap mode at this point of the installation so that import data into Database Instance ?
Second, how to view Oracle database instances in Oracle Database Server so that make sure Database instance PT853 is created ?
Thanks. -
Dear all
I got a Oracle 8i EE license and was installed at a Sun system. However, I want to migrate such Oracle to Linux environment (The Oracle maintenance was expired). So, anyone has the Oracle 8i EE Linux version which can be downloaded for my new installation.
Thanks
Kwan
22 Sept 2006You still should contact your Oracle sales representative.
Oracle no longer officially provides copies of obsolete versions of software, such as database versions 8.1.x or 9.0.x ... the only way to get such copies is by the kindness of strangers who might have such copies. Those strangers include your sales rep. -
Open parameters for linux version
Do acroreader's open parameters work for the linux version?
I know in Windows they are written as 'acroread /A page=xxx ...' and for linux firefox as 'file://...#page=xxx'.
But how about the arguments in command line?Good morning
Thank you for your reply, I’m trying to find out from our IT if we are using Adobe plugin or not. In the meantime I created a new document, created a link and tried to open in the browser and received an error message webpage cannot be found.
When copying the url the last four characters have been changed see below
http://wyp-infoshare/sites/forcepolicy/Corporate%20Support/Equality,%20Diversity%20and%20H uman%20Rights%20strategy.pdf%20-%20page=5
Would this be because we’re not using adobe plugin?
Susan
Ext 22011 -
Linux version for SAP ECC 6.0
Dear all,
Please help me in finding the suitable Linux version for SAP ECC 6.0 version.
Thanks & Regards
Tavargeri GaneshSAP on Linux
--> Supported platforms
Markus -
Linux version of iPlanet Directory Server 5.0 planned?
I'm wondering if there are plans to release a Linux version of iPlanet
Directory Server 5.0?
If so, any estimation on when it might be released?
JonI asked the same question and was told .....
Subject: Re: iDS 5.0 is officially released
Date: Tue, 15 May 2001 06:00:09 -0600
From: Richard Megginson <[email protected]>
To: [email protected]
All I can say at the moment about Linux support is that we are
currently
evaluating our options.
Peter Allmaker wrote:
Swell. And the Linux version will release when???------------------
Jonathan Eric Miller wrote:
>
I'm wondering if there are plans to release a Linux version of iPlanet
Directory Server 5.0?
If so, any estimation on when it might be released?
Jon--
Peter Allmaker
MCLA Computer Science 413-662-5592
Computer Support Services 413-662-5510 -
I keep trying to download the windows version of firefox so I can run it under wine on linux but all I can find is the linux version because the web site automatically detects the os. Any ideas on how I could do this?
Download from here: <br />
http://www.mozilla.com/en-US/firefox/all.html -
When will there be a 64-bit Linux version?
After fillinging out a long fill-in procedure to apply for a US passport, I found that the Linux program Okular could not finish.
I had to use a 32-bit Linux program that had Adobe Reader available, since there is no 64-bit generic version of Reader,
and PCLinuxOS-64 does not have any provision for running the 32-bit version.. I do not want to use the two or three
Linux-64 distros that permit that 32-bit use, since they have many other ideosyncracies which I deplore.I'm sorry "Test Screen Name", but could you please point to any more definitive announcements that there will be no more development of Linux versions of Adobe Reader? Thanks.
-
How to install d2k release 6i on redhat linux version 7.3?
How to install d2k release 6i on redhat linux version 7.3?
have you tried using open motif 2.1.30?
the open motif version that comes with the redhat 7.3 is 2.2 and is not compatible with 6i. Once I used open motif 2.1.30 it worked fine. The environment variable setting is very similar to any other unix version. Ensure that you are also intalling the latest patch (10) for 6i (fixed lots of problems).
regards -
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg 27 KBHello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much -
How to install ECC IDES in RED HAT linux version 5
Hai..
I would like to install ECC IDES in linux OS. I dont know Linux. So it is difficult for me to install.
I am having 500 gb HD.and in that 30 GB allocated as NTFS for WinXP.
Left space(470 GB Free) for linux and ECC IDES.
I want to know - how to partition this 470 GB in linux. I dont know which file system should be allocated and how it should be partitioned. I am using RED HAT LINUX Version 5.
i need a step by step process to install red hat linux with proper(file system) partition and
I need a step by step process to install IDES with Linux commands.
Thank You
Regards
R.Thillai Govindarajan> i need a step by step process to install red hat linux with proper(file system) partition and
> I need a step by step process to install IDES with Linux commands.
Get the official installation guides at
http://service.sap.com/instguides
However, they won't contain "now enter command X and now enter command Y". You will need to have a basic understanding what you are doing before you can install a SAP system (and the database).
Markus -
WTK 2.2 Linux Version, SMS send between phones broken?
Sending SMS messages from one phone to another seems to be broken in the Linux version of WTK2.2. I'm testing using the WMADemo MIDlet included with WTK2.2. Using the Linux version of the WTK2.2 emulator I get a "java.io.IOException: Connection closed" error from the phone sending the message (see below for full error). When I run the exact same MIDlet in the Windows version of the WTK2.2 emulator I don't get the error and the message is sent correctly and received by the other phone. Is there an existing bug report on this problem? If not how do I open one? I'm using Fedora Core 2 (Linux laalaa 2.6.5-1.358 #1 Sat May 8 09:04:50 EDT 2004 i686 i686 i386 GNU/Linux) and j2sdk1.4.2_08. I'm running the emulators from a NetBean 4.1 (same behavior in NB4.0) project.
Thanks for your assistance.
-- Steve
Send caught:
java.io.IOException: Connection closed
at com.sun.midp.io.j2me.datagram.Protocol.ensureOpen(+16)
at com.sun.midp.io.j2me.datagram.Protocol.newDatagram(+4)
at com.sun.midp.io.j2me.sms.DatagramImpl.send(+257)
at com.sun.midp.io.j2me.sms.Protocol.send(+429)
at example.sms.SMSSender.run(+79)Hi,
I'm having this particular problem on WTK windows version, but it appears just when running it through OTA provisionning.
Have you found the solution to your problem?
Isa -
There are several sites that offer Firefox downloads.
I don't trust any of them except mozilla.org
But I can't find a download button on mozilla.
I'm using Linux because my firefox on Windows 7 stopped working and the default download seems to be for a Linux version of firefox.
How can I download a windows version?
Why did Firefox stop working. I was downloading a program -- Tunein Radio - and it looked as if it was installing junkware.
I stopped the download but it seems to have already installed something called file opener. I uninstalled fire opener.
That may have caused the problemhello, you'll find download links for all supported systems & languages at https://www.mozilla.org/firefox/all/
if you suspect that the problem on your system is caused by malware it is probably advisable to run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner], which are specialised in adware and browser hijackers.
[[Troubleshoot Firefox issues caused by malware]] -
CRYSTAL REPORT SERVER 2008 LINUX VERSION INSTALATION PROBLEM
GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRAPost to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek -
Crystal reports server 2008 linux version instalation problem
GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRAPost to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek
Maybe you are looking for
-
Exception occurred during event dispatching
I'm facing a problem with dispatchCustomEvent() method while clicking a button on oracle form. The code is given below: package oracle.forms.finalbutton; import java.awt.*; import java.awt.event.*; import java.util.StringTokenizer; import javax.swing
-
ITunes crashing after print command
Since the last software update I experience iTunes crashing when trying to print from the archive menu. The message I get is that the cause is probably the plugin hpaio_print2pde. I use a HP printer PSC1510. Are there more people with this problem? D
-
How to invoke TaskService updateTask from within BPEL Process
Hi I have to call the updateTask method defined within TaskService to update the BPEL payload. I initiate the Task in the same BPEL process but I want to update the payload somewhere down in the same BPEL process. Can someone assist me in finding out
-
Uninstall Clustered Instance from Node
I've installed SSAS 2012 as a failover cluster instance on a 2-node Windows 2012 R2 cluster. All was fine in that regard but I now need to change the instance name so am going about the process of uninstalling and re-installing. I've successfully r
-
My Stream 7 does not reconnect to any WiFi after waking up... I've installed the updates still find that it doesn't reconnect, you should know that it doesn't happen all the time but when it does it is rather annoying having to turn on airplane mode