Javascript error when launching XFA pdf from browser

Hi all,
I am trying to use my XFA PDF from a browser. On my local system I have  set up a web server and am launching my PDF from there. However, I am getting a ReferenceError with regards to one of my Javascript functions.
My PDF has dependency on a javascript file that resides in the Acrobat path as follows:
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Javascripts\
When I use my PDF directly from an Acrobat instance, everything works fine. The issue comes up only when launching from server. How do I link the javascript file to my PDF?
Edit: The user is going to be launching the PDF from the server via a web browser. In such a case where do I place the javascripts?
Help appreciated,
Thanks

@George: thanks for the quick response!
My JS code contains a readFileIntoStream which I learnt is also to be run under privileged context. (still learning the ropes here.. ).  I have been trying to incorporate the JS code directly into the PDF to get around this privileged context..  but I am unable to find a non-privileged equivalent for readFileIntoStream..
Basically my users would be accessing the PDF from the server direct via the browser. For my testing purposes I am able to run the PDF directly from my desktop via an Acrobat instance without any hitch as the scripts are folder level like you mentioned. Is it possible for the users to be able to access the javascripts from anywhere on the server rather than directly from the PDF?  Please note, users will not be saving copies of the PDF on to their local machines (in which case we could have pushed the JS file along to their machines) . I need to ultimately run the PDF from browser.
I hope I am clear..
Thanks.

Similar Messages

  • Error when launching promoted app from RemoteAPP

    Hi:
    We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
    "Personalization:
    This theme can't be applied to the desktop.
    Try clicking a different theme"
    Help!
    Thank you,
    Stangride

    If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
    are manipulating themes.

  • Javascript Error while executing BEx querry from browser

    Hi Folks
    We have been getting a number of Javascript errors while executing BEx querries from the browser.
    The various errors that we have been getting are:
    'SAPBWItemCatalog' is undefined
    'SAPBWJSgdo' is null or not an object
    'SAPBWShortCutCatalog' is undefined
    We have already looked at SAP Note 783496 and validated the solution.
    Is there some specific settings that needs to be maintained for this?

    Hi Sandip,
    Just spent 2 hours chasing this one so I know how frustrating it is.
    Solution:-
    Check mime service in SICF - dafault_host/sap/bw/mime - if it's greyed out activate it.
    Regards
    Nev

  • Error when launching BEx analyzer from Portals

    BI Gurus...
    We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal.
    Bex Analyzer is primary mode of reporting at this time.
    After importing the Roles into EP, I am able to execute the web queries successfully, in the BEx Wen analyzer. But, I get an error when I click on any of the excel workbooks. Our expectation was that once we click on the excel workbook name, the BEx analyzer will launch from EP. But it seems like the issue is with launching BEx Analyzer from BI Portal.
    Has anyone faced this issue before?
    Is it possible to launch BEx Analyzer from EP?
    Are their some key portal settings we have missed out on to enable launching BEx analyzer from EP?
    Please provide your thoughts/experience.
    Thanks,
    Ajay.

    Hi WernerS,
    Thanks for your response.
    The RRMXP Transaction works and it launching the BEx Analyzer as expected.
    Now, as per our research, I think there are 2 ways of launching BEx analyzer from BI Portals.
    1) Call via a URL
    You can call BEx Analyzer via the following URL: http(s)://<server:port>/sap/bc/bsp/sap/rsr_bex_launch/bexanalyzerportalwrapper.htm
    You can modify the URL to open BEx Analyzer with either a workbook, a query or a query view. You can use the following parameters to do this:
    ●      Parameter to open the workbook: ?WBID=<wb_id>
    I have tried calling via URL iView, but instead of launching the BEx Analyzer, it just throws a dialog box to "save" or "open" a file, RRMX.bex. When I try to open this file, it says "Invalid File Format".
    I tried opening the file in notepad and I see the following parameters passed.
               test
               Data=BX2,CONAJP,EN,mikoyan,17,,,250,
               9
    Any clue about what I am doing wrong?
    2) Calling via a Transaction
    You can generate BEx Analyzer in Portal Content Studio as an SAP Transaction iView.
    The iViews are of type SAP Transaction iView and have the code link com.sap.portal.app integrator.sap.Transaction.
    The most important properties are System, Transaction Code (TCODE) and ApplicationParameter.
    ●      The Transaction Code for all workbooks is RRMXP.
    ●      The ApplicationParameter property contains the value WBID=<WORKBOOK_ID>.
    I have tried this approach as well. When I open this iView, I see the RRMXP transaction in the Internet explorer, but the workbooks still does not open in the BEx Analyzer (Excel)
    Any thoughts on where am I going wrong ?
    Thanks,
    Ajay.

  • Error when launching .rdp file from RDWebAccess with RD Gateway "NtlmWebAuthException: 2" on Mac Version 8.0.8 (Build 25010)

    When launching a .rdp file that has been download from an rdwebaccess session, the following error is generated "NtlmWebAuthException: 2". I have tested this on the Mac Microsoft Remote Desktop client version  8.0.8 (Build 25010).
    The following is the use case:
    Download the .RDP file for a published app "notepad.exe", on rdwebaccess (2012R2), accessed through the gateway (2012R2) VIA the connection broker (2012R2) on a RDSH server (2012R2). NLA is enabled everywhere.
    This same setup works on Windows using the Remote Desktop Connection client.
    I found that if you edit the .rdp file and add the following line (no quotes):
    "username:s: "
    Then the user is prompted for credentials. You may also set it to be "username:s:domain\username".
    This issue here appears that the Mac client is either ignoring the "prompt for credentials on client:i:1" setting, or it is passing blank credentials... or both.
    I appreciate all the work the MS team (and iTap) have done on this product... keep up the great work.
    Example failing RDP file:
    redirectclipboard:i:1
    redirectprinters:i:1
    redirectcomports:i:0
    redirectsmartcards:i:1
    devicestoredirect:s:*
    drivestoredirect:s:*
    redirectdrives:i:1
    session bpp:i:32
    prompt for credentials on client:i:1
    span monitors:i:1
    use multimon:i:1
    remoteapplicationmode:i:1
    server port:i:3389
    allow font smoothing:i:1
    promptcredentialonce:i:1
    videoplaybackmode:i:1
    audiocapturemode:i:1
    gatewayusagemethod:i:1
    gatewayprofileusagemethod:i:1
    gatewaycredentialssource:i:0
    full address:s:RDCB.COMPANY.COM
    alternate shell:s:||Notepad
    remoteapplicationprogram:s:||Notepad
    gatewayhostname:s:rdgateway.COMPANY.com
    remoteapplicationname:s:Notepad
    remoteapplicationcmdline:s:
    workspace id:s:RDCB.COMPANY.com
    use redirection server name:i:1
    loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.Notepad
    alternate full address:s:RDCB.COMPANY.COM
    signscope:s:Full Address,Alternate Full Address,Use Redirection Server Name,Server Port,GatewayHostname,GatewayUsageMethod,GatewayProfileUsageMethod,GatewayCredentialsSource,PromptCredentialOnce,Alternate Shell,RemoteApplicationProgram,RemoteApplicationMode,RemoteApplicationName,RemoteApplicationCmdLine,RedirectDrives,RedirectPrinters,RedirectCOMPorts,RedirectSmartCards,RedirectClipboard,DevicesToRedirect,DrivesToRedirect,LoadBalanceInfo
    signature:s:ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB

    Hi,
    I too have this problem but I am unsure of how you fo about adding the "username:s:domain\username"
    into the file as it is downloaded via the RD Web Access page.
    I know that I can edit the RDP file after the event and then send it to my users but I don't want the
    hassle of doing this,
    The weird thing is that ver 8.0.8 release notes say that there is a "Fix for the issues of starting remote connection from RDP files that included gateway information" 
    Anybody have any ideas?
    Thanks,
    Jaggie

  • Logon failed error when launching Web Intelligence from InfoView

    After changing the Web Intelligence preferences in BusinessObjects Enterprise XI 3.0 Java InfoView to launch the desktop or rich client option, I get a "logon failed" error message. However, when I launch Web Intelligence Rich Client from 'Start > Programs >...' directly, the same logon information is successful. The logon is set to use Enterprise authentication which is the same logon information used to launch InfoView and Web Intelligence.
    Why does the logon fail when I launch Web Intelligence from InfoView?
    Edited by: Ana on Mar 31, 2009 3:43 PM

    I deleted the report completely and rebuilt it from scratch, and also added names for the data table and data set generated within the project and finally, success!
    Jason, thanks so much for your help which got me moving on this again.

  • Problems - Javascript errors, when I login Portal from Internet.

    I have the following problem:
    In order to login SAP Portal 7.0, externally, I created a URL in  public host like http://km.mycompany.com,
    and that URL redirects me to my portal URL, like http://myserver.mycompany.com:50000/irj., using SAP WebDispatcher
    The problem is that if logon to http://myserver:50000/irj (from inside my LAN), I can navigate it OK.
    But if I login Portal from the Internet (outside LAN), I have in several pages Portal Javascript errors. I analyzed that these errors occur for example on page User Admin, or the Webdynpro Administrator.
    After analyzing a bit, I found that pages that give me javascript errors (for example, "SSR is undefined" or " 'me' is undefined", that dont let me to click buttons or see gifs images, or display /nwa page) occurs in the pages that does not begin with "/irj" but with "/webdynpro/dispatcher. "
    any ideas ???
    thanks in advance,
    regards,
    Edited by: Leandro  Balboni on Sep 1, 2008 11:44 PM
    Edited by: Leandro  Balboni on Sep 1, 2008 11:45 PM

    Hi,
    JavaScript issues 9 out of 10 have to do with FQDN issues.
    Anotherthing to check in the WepDisp config is:
    wdisp/permission_table = URLpermissions.pfl
    Good luck,
    Benjamin Houttuin

  • Parameters not set error, when launching jdev 9i from Unix

    Hi,
    I have downloaded the patch to install jdeveloper ( p4141787_11i_GENERIC.zip )
    and ftp'ed to Unix directory and unzipped.
    I have modified the jdev.conf to the location where SDK is installed. we are using SDK version 1.4.2.06
    I have set up the variable, JDEV_USER_HOME
    When I run the jdev.exe script from jdevbin/jdev/bin
    . jdev
    I get the below error, saying that the parameters are not set.
    Oracle9i JDeveloper
    Copyright 1997, 2003 Oracle Corporation. All Rights Reserved
    sh: JDEV_NATIVE_PATH: Parameter not set.
    sh: JDEV_VERBOSE_MODE: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_NATIVE_PATH: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_CLASSPATH: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JDEV_APP_OPTS: Parameter not set.
    sh: JDEV_VERBOSE_MODE: Parameter not set.
    sh: JDEV_JAVA_VM: Parameter not set.
    sh: JDEV_VM_OPTS: Parameter not set.
    sh: JAVA: Parameter not set.
    Appreciate your help.
    Thanks
    Srini Pendem

    Hi,
    If this is happens only with services view bills, view consumption history.. or this happens for every other service if you are trying to access 5 minutes after logon.
    Have to restarted your ITS server after changing these parameters.
    well i am not aware of any ITS based service Bill.. can you please help me out.. if this is part of ESS/MSS service.
    regards,
    Sudhir

  • Error when exporting a pdf in SAP

    She sends me the error when exporting a pdf from the SAP system, this is the message:
    X Object reference not set to an instance of an object.
    I hope I can support.
    Annex image

    See your other thread.

  • Error in character spacing when exporting to pdf from word 07

    I am having trouble with exporting to pdf from MS Word 07.  The character spacing throughout the document is wacky.  This also happens when exporting to pdf from a GIS program.
    Any help?

    I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
    In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
    I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
    As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed.  Some are embedded, some embedded subset, some are not embedded at all.  I use styles to manage font types and heading levels.  There is nothing fancy about it - all Times New Roman.

  • Javascript error prevents TOC, Index, Search from displaying

    I generated webhelp from my RoboHelp HTML project and got a javascript error (this.maCom[...]' is null or not an object) when viewing the result. See below for the full error text. As a result the TOC, index, and search do not display. The javascript error can be found in the browser status bar which indicates "Error on page." I found that if I viewed the result from robohelp, the browser that launched shows the TOC, index, and search, but has a security warning about a restriction from running scripts or ActiveX controls. However, when I move the generated webhelp to my production server, the help does not have the security warning, but does produce the error so that the TOC, index, and search do not show. I had performed the same process to generate webhelp about 8 months ago but did not have any error whatsoever. As a matter of fact, that version is still in production and works fine.
    In my research of the problem, I found this is the same error as forum message 4063663 (http://forums.adobe.com/message/4063663). I didn't have a second system with RoboHelp to be able to get another whphost.js, however, I diff'd the generated file with the one found in template_stock and found only two lines different. Those differences were only replacing a couple of variables with static text so I don't think replacing this file will solve any problem for me. This was the only forum message I could find that addressed this issue.
    I was originally on RoboHelp 8.0.0 when I first encountered the problem, but went ahead and patched to 8.0.2 and still had the same problem. I even created a new simple project. Once I moved the simple project to the production server, it also would not display the TOC, index, and search.
    The odd thing is that just 8 months ago, I used the same process to generate (on 8.0.0) the webhelp without any error. The only thing I can come up with is there was a WinXP patch that affected the webhelp generation. By the way, I also tried this in Chrome and that also produced the error.
    I'm not sure what is causing this problem or how to resolve the problem. Any one have any ideas?
    Versions:
    RoboHelp 8.0.2
    Windows XP
    IE 8.0.6001.18702CO
    Chrome 18.0.1025.168 m
    Javascript Error
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; MS-RTC LM 8; InfoPath.2; .NET4.0C; .NET4.0E)
    Timestamp: Wed, 2 May 2012 16:32:00 UTC
    Message: Object expected
    Line: 344
    Char: 2
    Code: 0
    URI: http://server1/robohelp/whphost.js
    Message: 'this.maCom[...]' is null or not an object
    Line: 171
    Char: 3
    Code: 0
    URI: http://server1/robohelp/whphost.js

    After further research and tests, I discovered the Security Update for RoboHelp 8 and 9 (http://www.adobe.com/support/security/bulletins/apsb11-23.html) posted as an announcement that I had not seen before. I had used the updates feature in the product, but that said I was up to date and did not include this update.
    The two javascript files in this patch solve the problem. The TOC, index, and search now display.
    Update:
    As I further researched the problem (while writing this response), I found files that were newer than the latest security patches I was aware of. In addition, I discovered that my security organization decided to patch with APSB12-04 without me knowing about it. This patch is why my 8.0.0 installation magically quit working. As I look at the security announcement, the bulletin did not include any prerequisites of specific versions the patch can be applied to (8.0.0, 8.0.1, or 8.0.2). Adobe, please give more information on the bulletins so that organizations that auto-deploy will be forced to know what is running before updating. Information like whether they apply to all Robohelp 8 versions or just a specific version. If APSB12-04 was meant to be applied to all 8 versions, then it did not work. It actually broke my installation of 8.0.0 for the generation of webhelp as well as subsequent installation of 8.0.1 and 8.0.2. It looks like they did a better job for APSB11-23. Maybe the security updates should be some sort of service pack that has an installation and a back-out process. Right now, my security organization has overwritten the files based on the specification in the security bulletin.
    I am going to try to patch with APSB12-04 again since I have updated the base to 8.0.2 to see if I can still generate webhelp. If I can't view the TOC, I'll have to remove it once again and be "out of compliance."

  • JAVASCRIPT ERROR WHEN DISABLED THE WELCOME AREA

    Hi sdn,
    I have modified our portal design. I set the welcome area and the logo area to the value none. Now I am always getting a javascript error when I call the side in my browser.
    I get the message that an object is missing and the browser can not set the focus to an element ==> because I have disabled two areas of the portal header.
    I have recognized this problem in all portal releases from EP6SP2 to EP6SP9.
    What can I do to prevent these error messages?

    I think this issue is fixed by this note : 798647. Suggested to go with latest hotfix.

  • Error when launching Photoshop CS5

    Photoshop CS5 bring up the following error when launching the application
    "The program can't start because MSVCP110.dll is missing from your computer"
    Uninstalling and resintalling the application does not resolve this problem

    http://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html
    Mylenium

  • Acrobat crashes when creating a PDF from a web page

    Whenever I ask Acrobat to create a PDF from a web page, it crashes halfway through the process.  Here is an example from the BBC:-
    http://www.bbc.co.uk/news/science-environment-19585341
    Printing to PDF from the browser does not produce an accurate document.  The font is too big, and most of the pictures do not appear.
    I use Acrobat X Pro version 10.1.4.
    This is a PC problem.  On the Mac it works.

    The problem I mentioned is peculiar to Acrobat 10 and also to my PC.  On a Mac I can create PDF's from webpages normally.
    I also notice that when printing to PDF from Opera only the first page comes out.  (Using Firefox all pages are printed to PDF.)

  • When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

    When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

    The system was not my own, it was on a PC belonging to the school where I teach. The error message referred to Acrobat 9.0, so I assume that the problem is to do with the version on which the file was created being more recent than that on which I attempeted to open it.

Maybe you are looking for

  • Any limit to number of secondary ip addresses?

    Hi, Is there any limit to the number of secondary ip addresses on an interface of a router? I just took over an existing live system. The previous engineer configured secondary ip addresses on a single physical interface. Currently, there are 1 main

  • ITunes does not sync with my previous library

    Hi there, I hope someone could help me out here. I have just recently formatted/re-installed Mac OS Maverick on my MBP, and iTunes (v 11.3) was also updated. I have moved my previous library and re-directed iTunes (iTune -> Preferences -> Advanced) t

  • Hijacked apple id through apple support profile!

    unknown person(s) have hijacked my entire apple id! After some experimentation, i have regained some control back over it. although, I can not contact Apple support either through the internet or a phone call! Below, I will explain what I have found!

  • How can I access RAW files from a Canon 650D on PSE 9 or 10?

    We have versions 9 and 10 of PSE to install on two computers, upgrading from version 6 on one of them. We have two Canon cameras - a 450D and a 650D - and have taken RAWs on both. The 450 works fine with PSE6, but we can't get PSE 9 to take a RAW con

  • Error during installation of quickstart 2.0.10.11 on my S10-2 with 3g module

    I tryed to install this version of quickstart on my S10-2 (windows 7) and I'm continuously geting this error message: Error Can somebody help me? I read on this forum that this version of quickstart is installable on 10-2 wint win 7...