Jbdc sender adapter: problem whit numeric format

hello!
i have a jdbc (sql server)->xi->RFC interface in my XI 3.0 .
On the table i'm reading a double field and i map it into a string field.
But numeric format are changed inside XI.
So when on table i have a number like this: 12.12345 on monitor i'll find this: 12.1234499999999999999
And later on rfc too...
any suggestion?

Hi,
What SP level you have.
Are you using any other step in between your Source & Target field mapping?
Try to implement this...
/people/thorsten.nordholmsbirk/blog/2006/08/25/new-arithmetic-and-statistical-functions-in-message-mappings-in-sp18
Regards,
Sarvesh

Similar Messages

SOAP Axis adapter - problem with XML formatting

Hello All,
We are using SOAP Axis adapter on our scenario (because of NTLM authenticatiom) and faced a problem that some module in a module chain is pretty-formatting XML message (inserting newlines and spaces).
Receiving WebService is REALLY strict on format and doesn't allow spaces and newlines between XML elements.
Formatting is for sure done already in adapter as in sxmb_moni message is still one-liner.
After different tests this formatting is most likely done by XI30OutboundHandler.
Are there any parameters to prevent this formatting?
If there are no parameters, than maybe there is a standard module to remove this XML indentation?
Where I can found source code for XI30OutboundHandler to check how it is extracting payload from XI message?
Thanks in advance for your answers!
Best Regards,
Artsiom Anichenka

Hi, have you find a solution for this problem?
I've tried set the parameter “disablePrettyXML”, as mentioned in SAP note 1039369 (search for “disabling pretty XML”), but apparently it didn’t work too. Have you tried that?
I still get linefeeds and carriage return in the post requisition to the WebService.
Regards,
Ronaldo Schork.

PI 7.1 using FTPS as File Sender Adapter: Problem connecting to Server!

Hi
We are using SAP PI 7.1 and I am trying to connect to an FTPS Server, but always get the following Error in the log: "Channel FileReceiver: Error connecting to ftp server 'hostname': com.sap.aii.adapter.file.ftp.FTPEx: The control connection to the FTP server hostname timed out while reading the server reply."
I checked all the parameters and they seem to be ok! When I am using the same parameters with a WS_FTP Client Tool on the same server, I can establish the connection! Hostname, Port, User, Pass, etc must be ok ... I also imported the CA Certificate into the "TrustedCAs" KeyStore ...
We also checked if on FTPS Server side we can see anything in the logfiles, but it seems that PI (Fiel Adapter) does not send anything to the FTPS Server. On OS Level we see that a TCP Connection is established tho the Server on the correct Port and we also used a tool to analize if data is sent over the established connection, but there was no data :-o
Can anybody help me?
Thanks
Christoph

Hi Pavan
Access rights are ok ... how do I check if my PI Sysem supports FTPS? We have installed the crypto extensions and I also can select the FTPS Option on the file adapter. Is there anything else that must be enabled or configured?
Regards
Christoph

JMS Sender adapter Problem

Hi All,
I have posted this question earlier too. But did not get a proper answer.
I am using JMS adapter to fetch data from MQ.
My input data is: AA123BB45678AA345BB78564.
It is just reading the first segment i.e.AA123 and not reading the remaining.
How can I configure my JMS adapter to pick this pattern of data? It works fine if I have line break after each record that is if the input is as below.
AA123
BB45678
AA345
BB78564
In the above there is a Line break after each segment. So JMS adapter picks it fine.
I have also tried using xml.A.endSeparator equals to blank in the module configuration. But it does not work either.
Can anyone throw some light to this?
Thanks
Abinash

Ok If I had to configure the sender File adapter to read the above mentioned input data how can I do it.
AA123BB45678AA345BB78564.
I don't have any line breaks between segments.
I want it to read it as following
<Src_MT>
<SRC>
<A>
<A1>AA</A1>
<A2>123</A2>
</A>

<B1>BB</B1>
<B2>45678</B2>

</SRC>
So on.
What value should I have in xml.A.endSepartor and xml.endSeparator to make the above case work?
Thanks
Abinash

Problem of encoding for mail sender adapter

Hello, everyone.
I have faced the problem of mail sender adapter.
When someone send message with any content encoding (even UTF-8) and 8bit content type encoding the XI mail adapter corrupt special and foreign symbols. I checked the message for correct structure and encoding with tpcgw utility and it was fine. For example (this is what I can see in tcpgw)
==== Response ====
+OK
+OK Password required for user itra_xi
+OK XXXXX maildrop has 1 messages (2048 octets)
+OK 1 2048
+OK
+OK 1459 octets
Return-path:
Received: from (port=20091 helo=XXXX)
     by mx76.mail.ru with psmtp
     id 1O7UoW-0003I4-00
     for XXXXXX; Thu, 29 Apr 2010 18:34:04 +0400
Message-ID:
Subject: Message 29 4
Date: Thu, 29 Apr 2010 17:33:43 +0300
MIME-Version: 1.0
Content-Type: multipart/alternative;
     boundary="----=_NextPart_000_0018_01CAE7C2.1D0BBA60"
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2900.5843
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
X-Spam: Not detected
X-Mras: Ok
This is a multi-part message in MIME format.
=_NextPart_000_0018_01CAE7C2.1D0BBA60
Content-Type: text/plain;
     charset="utf-8"
Content-Transfer-Encoding: 8bit
Test
Тест
And after processing by XI mail adapter I have this payload (XIPAYLOAD mode using mail package)
Test
├É┬ó├É┬╡├æ┬ü├æ┬é
The same situation with using mail package in xml document.
Any suggestions how this can be corrected?

I switched UTF-8 encoding during displaying of http content in tcpgw utility and all other mail clients detect it as UTF-8 and work fine. Also this problem occurs with different mail clients that are senders of the message. So it seems adapter takes each byte of cyrillic symbol (each from two) and represents it as individual symbol.
Correct me if I'm wrong. Maybe there is some configuration somewhere allowing to correct or maybe it's possible to write module to correct.. but it's quite complicated to split correct and incorrect symbols.

JDBC sender adapter - driver problems

Hi.
Iu2019m struggling with a little problem regarding the JDBC sender adapter, querying an Oracle database.
Iu2019m making a simple SELECT statement, where one of the fields is of the typeu201DTIMESTAMP(0) WITH LOCAL TIMEu201D.
Making the query in a SQL client works just fine, but in the JDBC sender adapter, it generates this error u201DError during conversion of query result to XML: java.sql.SQLException: Session Time Zone not set!u201D
Iu2019ve searched for answers on numerous forums, and found one place, where the following where the solution:
>>> Hi. The issue is that the driver itself needs to have a time zone
>>> set. You have to call setSessionTimeZone() on the connection object.
Unfortunately it is a bit hard to call this function in the adapter.
Any of you guys have an idea what to do?
I can add, that making a query, where no date fields are selected, works fine in the adapter.
Regards...
Peter

Problem solved...
Put a conversion (CONCAT, SUBSTR, TO_CHAR, etc.) around the date field you are about to fetch, and it works just fine.

Select query problem in JDBC sender adapter

Hello Experts,
We have a problem with PI sender adapter that PI has started to miss records in database some database records are missing and we are using the below selet query :
SELECT * FROM [database name].[dbo].[Material_Movement] WHERE [Process_Order_Number] = (Select TOP 1 [Process_Order_Number] FROM [database name].[dbo].[Material_Movement] WHERE ([PI_Read_Date] IS NULL AND [Movement_Type] = (SELECT TOP 1 [Movement_Type] FROM [database name].[dbo].[Material_Movement] WHERE [Transaction_Code] = 'xyz' AND [PI_Read_Date] IS NULL ORDER BY Created_Date ASC))) AND [Transaction_Code] = 'xyz' AND [Movement_Type] = (SELECT TOP 1 [Movement_Type] FROM [database name].[dbo].[Material_Movement] WHERE [Transaction_Code] = 'xyz' AND [PI_Read_Date] IS NULL ORDER BY Created_Date ASC) AND [PI_Read_Date] IS NULL ORDER BY [Transaction_ID] ASC
I am weak in select query could you please check and suggest how the query can be modified to avoid this issue .
Thanks,
Somenath

Hi ,
After looking into These Query .. I found ...
Your Query Will run such Kind of scenario ..
1.)   Movement Type will be fetched from from below Query
        SELECT TOP 1 Movement_Type
        FROM database name.dbo.Material_Movement
        WHERE Transaction_Code = 'xyz'
       AND PI_Read_Date IS NULL
        ORDER BY Created_Date ASC
2.) on the basis of abovr fetched moment code . your Query will fetch 1 Process Order number
Select TOP 1 Process_Order_Number
FROM database name.dbo.Material_Movement
WHERE ( PI_Read_Date IS NULL
              AND Movement_Type = Moment Type will be same as 1.
3.)
After Getting 1 and 2 . Query will fetch Data from table " dbo.Material_Movement "
On the basis of ..
Movement_Type = value from 1.
Process_order_type = value from 2.
Transaction_Code = 'xyz'
ORDER BY Transaction_ID ASC
So check Missed record Fullfill this Condition or not ....................
If not ... You will get why they are not picked by your given Query ...........
Hope it helps ..
regards
Prabhat Sharma.

Sender File adapter problem

Hi,
I have File to JDBC sceanrio, File is on FTP server and data is added in file in every 15 mint. while adding data to file its takes some time.
My problem : when data is being added to file, sender adapter picks the file when addition of data is not completed. so it picks incomplete file and send to target.
What can be the possible solution to be used for this problem or what configurtaion can be done in CC required.
Thanks
Laxmi Bhushan

Hi Laxmi,
is PI picking file in NFS mode or FTP mode?
With NFS mode, you can use setting wait for file modification check. Same setting is available for FTP but it doesnt not work for FTP.
Another option could be ask Source system to generate file with a temporary name & rename once file is writen completely.
Regards
Sushil

Problem in file sender adapter for newline character

Hi All,
I'm trying to read a file of only one record with the following fields.
Name
Age
Place
Each field is seperated by a new line which is the cause of the problem.
The problem is the value 'nl' for x.fieldSeperator is not been recognised in file sender adapter.
The adapter creates a new record (new XML) for each individual field seperated by new line.
I've tried even with the corresponding hexadecimal values '0x0a' and '0x0d'.
Looking for some help.
Thanks,
Joe.

Hi Shabarish,
Thanks for your reply. But I tried that too already... It also didn't work..
File adapter is successful... But it generates seperate records for each fields that's wat the prob is..
Thanks,
Joe.

Sender Adapter archiving problem

Hello All,
In the sender adapter channel, we are getting the following error message. The messages are not getting archived in the archive folder that we have mentioned in the Sender adapter configuration in the ID.
Putting message into send queue failed, due to: com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id 36f5f1e6-97a8-41b0-1fb8-b9c2bdbb6008(OUTBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPPIXDB.SYS_C00159667) violated .
Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id 36f5f1e6-97a8-41b0-1fb8-b9c2bdbb6008(OUTBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPPIXDB.SYS_C00159667) violated
Could you please let me know the exact problem? And how to resolve this? Thanks.

Hi there,
This error is issued if a user tries to insert an already existing value into a column defined unique.
This error will also be generated if an existing record is updated to generate a duplicate (unique) key. Typically this is a duplicate primary key, but it need not be the primary key.
Remedy:
Only one of the following will be appropriate:
1. Remove the unique restriction.
2. Change the restriction to allow duplicate keys. An index could be changed to be a non-unique index, but remember that the primary key must always be unique.
3. Do not insert the duplicate key.
Cheers'
Neetesh

Rfc Destination problem in RFC Sender Adapter

Hi experts
I created a Rfc destination type TCP/IP for Rfc Sender adapter.
while creating i passed following parameter:
1) I selected Activation Type option-> Registered Server
2)Given a Program id , same as i given in Rfc sender Adapter config.
3)Gateway option:
   i) Gateway Host:Server IP address where i created Rfc.
ii) Gateway Service:sapgw00
After making these entry, i m unable to receive message at XI end (I am executing Rfc at R/3 site due to Rfc sender)

Hi
please check for the following things.
1. check the RFC destination using the connection test tab in the R/3 system.
2. check whether the program id that u have given is registered or not.
to check the program id go to the transaction SMGW, in the menu select Goto-->LoggedonClients
check for ur program id name in the table.
3. when you configure the RFC sender adapter in XI then you have to give the same program id name that you will give while creating the RFC destination in the R/3 system.
if u still face the problem please reply me back.
Thanks
Rinku

Problem with XML document created by JDBC Sender adapter

We are using a sender JDBC adapter to publish data out of a DB2 table. The message generated by the XI sender adapter seems to have 2 extra characters that break our mapper. You can see the characters (the dashes on lines 2 and 4) in the XML document that I copied from message monitoring. Once I remove these dashes and test the mapper in test mode, it works. If I test with the dashes, the mapper fails. Has anybody else seen this issue?
Regards,
Ivailo
<?xml version="1.0" encoding="utf-8" ?>
- <ns:CUSTOMER_SCOPE xmlns:ns="http://com.gatx/xi/RCRepairEstimate">
- <row>
<CM_CUST_GROUP_CODE>2915</CM_CUST_GROUP_CODE>
<CM_CUST_SUB_CODE>2</CM_CUST_SUB_CODE>
<CM_CUST_ID />
<CM_TERMS>30</CM_TERMS>
<CM_CUST_SHIPTO_GRP>2915</CM_CUST_SHIPTO_GRP>
<CM_CUST_SHIPTO_SUB>2</CM_CUST_SHIPTO_SUB>
<CM_BILL_NAME>GATX RAIL/CANADA</CM_BILL_NAME>
<CM_BILL_ADDR1>540 5TH AVENUE SW SUITE 1225</CM_BILL_ADDR1>
<CM_BILL_ADDR2 />
<CM_BILL_ADDR3 />
<CM_BILL_CITY>CALGARY ALBERTA</CM_BILL_CITY>
<CM_BILL_STATE />
<CM_BILL_ZIP5>0</CM_BILL_ZIP5>
<CM_BILL_ZIP4>0</CM_BILL_ZIP4>
<CM_FOREIGN_ZIP>T2P 0M2</CM_FOREIGN_ZIP>
<CM_ATTENTION>AL FREDERIKSEN</CM_ATTENTION>
<CM_SALESMAN_INI />
<CM_DB_RATING />
<CM_CRED_LIMIT>0</CM_CRED_LIMIT>
<CM_CRED_FLAG />
<CM_LAST_CHG_DATE>1282005</CM_LAST_CHG_DATE>
<CM_CHANGED_BY_USER>XSKISSEL</CM_CHANGED_BY_USER>
<CM_REORG_CODE>N</CM_REORG_CODE>
<CM_CORP_GROUP_CODE>0</CM_CORP_GROUP_CODE>
<CM_CORP_SUB_CODE>0</CM_CORP_SUB_CODE>
<CM_RECORD_CODE />
</row>
</ns:CUSTOMER_SCOPE>

Hi Ivailo,
I think the problem lies in the way you copy the data from monitor.
whenever you want to copy data from XI monitor to test in your IB,make sure you select "view source" and then copy the source message otherwise you will get the browser view of the XML document which contain those "-" for expanding and collapsing the document.
Regards,
Sridhar

Problem in receiving messages via RFC Sender Adapter

Hi,
I have problems in receiving messages from SAP backens systems. Sometimes we are getting all messages sometimes not. Strange.
We are transfering report-results via asynchronous RFC calls. To avoid big message sizes we split them up in max. 1000 rows blocks.
Each RFC call on backend side is completed with COMMIT WORK!
We increased the number of connections in the RFC sender adapter. Then it was better, but the problem still exists! Not so often, but sometimes !?!?!
I hope everybody can help me. Thanks a lot!
best regards,
Hannes

hi,
when you don't receive messages what do you see in SM58
on the r3?
any errors over there?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Problem with JDBC Sender adapter

hi guys!
I´ve problem in PI 7.0, with the JDBC Sender Adapter, execute select sentence and update status in Oracle database.
In RWB Message Monitoring and SXMB_MONI I can't see any message.
Someone have any idea how to fix it?
Thanks in advance.

Hi David,
First check on the sender communication channel, if no data has been picked up by PI on channel,
then check the configuration of channel in the ID, especially select query.
If that is ok, then ask the sender application team(oracle database team) to run the query on their side
and to check if they are getting any data.
There could be the possibility of error in data also.
-Supriya.

JDBC Sender Adapter Message format

I am somenone who is new to SAP PI so please help me out in the format of datatype for JDBC SENDER Adapter ?

Hi Rajesh
The source xml structure for JDBC adapter is like below
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset>
Then in the sender JDBC adapter, write the select and update query
SQL statement for query: SELECT * FROM table WHERE processed = 0;
SQL statement for update: UPDATE table SET processed = 1 WHERE processed = 0;
processed is the indicator in the database.
Check this link for details
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm

Jbdc sender adapter: problem whit numeric format

Similar Messages

Maybe you are looking for