JCo 3.0 connectivity issues between Java application on NWCE and ERP

Requirement: We have a Java application that would run on NWCE. This application will be invoked from ERP/SAPGUI via HTML Controller. With SSO enabled, the goal is to pass ERP credentials to CE application. This CE application in turn will use ERP credentials from Logon ticket to connect to ERP and invoke BAPI calls (JCo 3.0 destination)
System Information:
CE System: SAP NW CE 7.2 SPS 04
ERP: SAP ECC 6.04
Both systems are trusted using X.509 certificates
Current scnerio:
1) Destination (CE to ERP) - JCo 3.0 using Authetication method of u201CCurrent User (Logon Ticket)u201D
- Web application is unable to find the JCo 3.0 destination.
2) Destination (CE to ERP) - JCo 3.0 using Authetication method of u201CTechnical Useru201D
- Web application is able to find the JCo destination
Any assiatance in resolving the issues would be appreciated ....
Trace Log:
#2.0 #2011 01 19 14:44:38:756#+0100#Error#com.sap.security.core.server.destinations.provider.DestinationsProviderFrame#
com.sap.getDestinationProperties()#BC-JAS-SEC#tcsecdestinations~provider#001F2960BE89048C0000000100005BC1#16777250000000004#sap.com/TestJcoWebEar#com.sap.security.core.server.destinations.provider.DestinationsProviderFrame#10207625#182##4286395D23D211E08BA2000001000022#d981f18323b011e0b5eb000001000022#d981f18323b011e0b5eb000001000022#0#Thread[HTTP Worker [@2002275007],5,Dedicated_Application_Thread]#Plain##
ASJ.dest.pr0023#

Hi Hemandra,
This is the Full error message i am getting
Message:   ASJ.dest.pr0023
Severity:   Error
Date:   2012-02-09
Time:   21:37:25:134
User:   SUPPLIER
Category:   /System/Security
Location:   com.sap.security.core.server.destinations.provider.DestinationsProviderFrame
Application:   XXXXXXXXXXXXXXXXXXXXXX
Thread:   Thread[HTTP Worker [@254542764],5,Dedicated_Application_Thread]
Data Source:   j2ee/cluster/server0/log/system/security.log
Arguments:
Passport User Activity ID:   1d2dfea9533811e1adf3000000dc2fc6
Message ID:   com.sap.getDestinationProperties()
Session:   11
Transaction:
Time Zone:   +0530
Customer Message Component:   BC-JAS-SEC
Runtime Component:   tcsecdestinations~provider
Correlation ID:   14430150000000004
Passport Session:   8703D330533611E19565000000DC2FC6
Passport Connection:   1d2dfea9533811e1adf3000000dc2fc6
Passport Connection Counter:   0
Host:   XXXXX
System:   XXX
Instance:   J01
Node:   server0
Log ID:   C000AC10088100FF0000000000002BF1
Regards,
Srinivas

Similar Messages

Connectivity issue between STVN OrgChart 2.1 and SAP

Hi all,
We're facing an issue below:
We have installed OrgChart 2.1 Live, but when configuring (http://localhost/orgchart/manager.aspx) there's an option of Staged there to be filled.
Is that right? Do we need to configure Staged even we choose Live on installation or leave those fields on blank?
Also when we try to connect to SAP server via (http://localhost/orgchart/default.aspx) using username and password nothing happens just a message (invalid login).
Do we need to configure something else? Roles? etc?
Hope you can help us soon!
KR,
Marcelo

Hi Marcelo,
You can ignore the Staged configuration in the Live version. From STVN2.1 the admin console includes both.
You need to configure the role mapping in either RoleMapping.xml or the administrator console (in Security). If a user doesn't have a role that is mapped then they cannot log into the application.
Kind regards,
Luke

Issue with Java Application with ECC - Connection Issue

Hi
We have developed one java application to connect to SAP to extract some data. We are using java API (sapjco) to connect to the SAP. Now we are facing one issue u2013 for the ECC while connecting through the java application we are getting u201CUserid or Password incorrect erroru201D, but with the same userid and password we are able to log through the SAP GUI. If we changed the password with all CAPS (Capital Letters) and without numeric values, its working fine in java application (Means its connecting to ECC)
We are facing this issue only in ECC; the same application is running successfully in SAP 4.7 etc. without changing password.
Please Help!

I would draw the conclusion that you have to provide the paaword in upper case. There is a standar java method there that does this for you. Just do it before sending the password.
Regards,
Benny

Connecting to desktop Java application from R/3

I want to connect to a java application program in my desktop and return a parameter to R/3. I have installed Java connector and I want to call the java application from R/3 using Java connector.
I was able to get few samples to setup the RFC destination for a remote server program, but I was not able to find anything for an application in the client system. How to setup the RFC destination for a Java connector to call the application in the desktop? Can anyone please answer this question.

Hi Allam,
1. Why do you need to connect from backend system to your desktop client? Did I understood it correctly that it's exacly what you want to do?
2. I guess examples you saw are for JCO or JCA which is a part of SAP J2EE server. Simply speaking the server is waiting for a client request and your desktop application probably not. If you still are sure that server->desktop connection is what you need then you have to emulate the server on your self and then depending on what you need JCO/JCA you have to create a kind of container that will implement listening service.
I'd like to hear your answer for question one to give you more detailed answer.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

HT201398 Innhave a connectivity issue between my iPad now using iOS8.3 and my Dual 150 external GPS.There was no issue before I updated to iOS8.3

Updating to iOS 8.3 has caused a connectivity issue between my iPad and my Dual150 external GPS. Can I revert to a previous version of iOS?

The only way to get this working again is to downgrade to 8.2
Seems Apple does not have this on a high priority list and am not willing to buy something that works for a lot of money. The flying community who uses this for navigation is having a lot of problems with this issue. The position awareness is compromised. Hope they fix this quickly

Connectivity issues between Cisco 2901 and Cisco SG300-52

Hello,
I am having some serious connectivity issues between the hosts in my LAN.
My LAN is based on a Cisco 2901 router and a Cisco SG300-52 port switch.
The issue that has been happening is that connections between hosts on the LAN (remote desktop, extended ping, etc) is very unstable, at some point I can see a 35% lost packets on an extended ping. This happens at any time of the day and from any host.
All hosts are on the same Vlan(default Vlan) and on the same subnet. Some hosts have fixed IP addresses (servers and network equipment) and others obtain their IP address trough a DHCP reservation established on the router (reserved with the MAC address of every host).
I can provide further details if needed, because this issue is very serious and I would really appreciate any insight or support.
Many thanks in advanced.
Sair Amer
EDIT: After doing every test we could think of, we finally found the reason behind this problem.
It turns out that the switch has problems handling communications between clients at different speeds, because most of the hosts connected were working at 100 Mbps but the servers were working at 1000 Mbps (and the communication between host and servers wasn't stable).
After manually setting the speed on all ports to 100 Mbps the problems have stopped.
Many thanks for you help on this issue.

Building configuration...
Current configuration : 4123 bytes
! Last configuration change at 12:06:16 PCTime Sat Jul 19 2014 by ccp
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Foninsa
boot-start-marker
boot-end-marker
no logging buffered
enable secret 5 $1$BDbJ$HN3VP8nmywrGB55RCxPd30
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone PCTime -4 0
clock summer-time PCTime date Apr 6 2003 2:00 Oct 12 2003 12:00
no ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp excluded-address 192.168.1.151 192.168.1.255
ip dhcp pool FONINSA
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 8.8.8.8 8.8.4.4
ip dhcp pool Laptop-Sporta-Wifi
host 192.168.1.10 255.255.255.0
ip name-server 8.8.8.8
ip name-server 8.8.4.4
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-213585710
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-213585710
revocation-check none
rsakeypair TP-self-signed-213585710
crypto pki certificate chain TP-self-signed-213585710
certificate self-signed 01
30820229 30820192
quit
license udi pid CISCO2901/K9 sn
license boot module c2900 technology-package securityk9
username ccp privilege 15 password
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 190.196.21.98 255.255.255.248
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
no ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip nat inside source static tcp 192.168.1.3 21 190.196.21.98 21 extendable
ip nat inside source static tcp 192.168.1.3 80 190.196.21.98 80 extendable
ip nat inside source static udp 192.168.1.8 1194 190.196.21.98 1194 extendable
ip nat inside source static tcp 192.168.1.4 3389 190.196.21.98 3389 extendable
ip nat inside source static tcp 192.168.1.9 3389 190.196.21.98 10000 extendable
ip nat inside source static tcp 192.168.1.3 3389 190.196.21.98 20000 extendable
ip route 0.0.0.0 0.0.0.0 190.196.21.97
access-list 1 permit 192.168.1.0 0.0.0.255
control-plane
line con 0
password $
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 5
access-class 23 in
privilege level 15
password #
transport input telnet ssh
no scheduler allocate
end

How to remove Java Applications from "Add and Remove Programs" list?

I have deployed my Java applications (both JWS and Applet) via JNLP with allow-offline option enabled and without installer-desc option specified.
My questions are:
1. An entry is added to the Add and Remove Programs list after launching the application via JNLP. Is it due to the specification of JNLP or JWS? Is there anyway to prevent this behavior?
2. I removed my application by clearing the cache via Java Control Panel but the entry for the application is still listed in Add and Remove Programs. How can I remove the entry in the Add and Remove Programs?
I have tried following methods but neither works:
1.Go to Add and Remove Programs, and click [remove] button to the right of my application.
*Warning message like 'Application cannot be uninstalled completely' is thrown.
2.Follow instructions listed @ [Microsoft Online Support site|http://support.microsoft.com/kb/314481/en-us] to remove my application manually via Windows registry.
*Couldn't find appropriate registry entry to delete.
Thanks in advance!

Hi, guys!
This issue has been officially approved as a new bug (Bug Id: 6946221) for the JDK 1.6_20(might include any release below) release.
It will take a couple of days for it to be shown up in the external Bug database. However, once it becomes available for viewing on external Bug database.I would like to encourage your valuable participation to vote on this bug to get it fixed ASAP by the SUN developer teams.
Java Bug Database @
[http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946221|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6946221]
Voting for the bug @
[http://bugs.sun.com/bugdatabase/addVote.do?bug_id=6946221|http://bugs.sun.com/bugdatabase/addVote.do?bug_id=6946221]
Thank you for your cooperation!
Edited by: Jay-K on Apr 23, 2010 12:14 AM

Compatibility issue between your power management system and Windows 8.1

I have purchased a new Lenovo Ideapad S410 and have this problem.
Compatibility issue between your power management system and Windows
It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
If you'd like to know more, you can search online later for this error:
VIDEO DXGKRNL FATAL ERROR
Please help! My laptop is only 5 days old.

What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm.

Adobe Flash IDE: Migration/Compatibility issues between Adobe Flash Professional CS3 and CS5

Hi,
Adobe Flash IDE: Adobe Flash CS3 Professional and Adobe Flash Professional CS5
I am facing some migration/compatibility issues between Adobe Flash CS3 Professional and Adobe Flash Professional CS5:
I am working on a project that has been completely developed in CS3 earlier. When I am using CS5 (Flash Player 9 / Flash Player 10) to compile the FLA files, it is creating some new issues like some customized radio buttons are getting disappeared while viewing the SWF on a web page etc.
So, I would like to know:
1) Is there any migration/compatibility issue between Adobe Flash CS3 Professional and Adobe Flash Professional CS5?
2) If yes: Is there any patch available from Adobe for it?
3) If no: What could be the causes and the best possible solutions for it?
Any help and support would be highly appreciated. Many thanks in advance!
Thanks & Regards
Amit

Apparently some people have issues, but I don't think it is across the board. Here's a link to another recent posting that may or may not prove helpful to you...
http://forums.adobe.com/thread/776615?tstart=60

ChaRM configurtn-No network connectivity in between DEV-QA1 to QA2 and PRD

hi Experts,
We are planning to implement solution manager for CHaRM configuration.
Our Landscape is something like this...
ECD(DEV)->EC1(QA1) and
EA2(QA2)->EAP(PRD)
we are not having any network connectivity in between DEV-QA1 to QA2 and PRD. DEV and QA1 are in one network and QA2 and PRD are on other network.
DEV and QA1 are connected and QA2 and PRD are connected.
Now we need to implement ChaRM from Dev to PRD, so please suggest me how to implemet this. Whether this is possible or not? what different settings we have to do from standards.
It would be very great if you suggest us on this.
thanks
narpal

Hi Raghu,
we are moving the files (Co files and Data File) manually from QA1 to QA2.
We are runnning one batch proggram that moves the co file data file from QA1/DEV to one spefifyed folder/server/device.
And then from this device/folder to QA2 we are moveing manually.
Now same way whether we can move the files in case of ChaRM configuration? Please suggest?
thanks
Narpal

Is there any Compatibility issues between Yosemite 10.10.2 and Adobe Elements 12 editor 12.0 or adobe DNG converter 8.1 ?

Is there any Compatibility issues between Yosemite 10.10.2 and Adobe Elements 12 editor 12.0 or adobe DNG converter 8.1

A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

Compatibility issue between your power management system and Windows,

Compatibility issue between your power management system and Windows, and my system is Lenovo ACPI-Compliant Virtual Power Controller.

What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm.

Dieffrence between ALE (Application Link Enabling ) and EDI

Dear Experts
can you pls. explain me the dieffrence between ALE (Application Link Enabling ) and EDI (electronic data interchange)
especially regarding transfer (transmission).
Regards
Marco
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Jan 25, 2012

Dear Experts
can you pls. explain me the dieffrence between ALE (Application Link Enabling ) and EDI (electronic data interchange)
especially regarding transfer (transmission).
Regards
Marco
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Jan 25, 2012

Difference between Java EE 5 Platform and J2EE 1.4 Platform

What are differences between Java EE 5 Platform and J2EE 1.4 Platform. How we can choose one for a specific environment.
regards

dont be phsyco. MAy be i m good in other topic than
u. Its time restriction i am facing. OK leave it,
dont reply any help. its ok.
ake careEvery culture has rules under which it operates. This one is no exception. It is the unspoken policy of the forum regulars to heap scorn on people who demonstrate an unwillingness to do things for themselves, or to at least put forth an effort. Therefore you have been the target of a certain amount of vitribution. Perhaps you are the lazy worthless git your posting implies perhaps not. None of my business and I don't really care.
You were pointed to a source of the information you asked for and rather than saying thank you, you demand that the rest of us sacrifice our time to synthesize the information and provide you with an answer about which we actually have very little information, namely what in the bloody <expletive deleted> you're interested in? Oh wait you did say you wanted us to tell you how to pick one or the other.
And you still can't see why you would become the target of a certain amount of ire on the part of the forum regulars. Might want to give that one some thought.
But now to your question, well sort of, I can give you a synopsis of what's changed between 1.4. and EE 5, but if I do that what you will know is that one person told you something. If you use the resources that you've already been given and arrive at your own conclusions and questions you will both know what you found and have a frame of reference with which to address specific questions relating to specific change topics. If you do that, most of us here will be more than happy to discuss adnauseum the ramifications of any and all of the changes.
These are the kinds of topics that we will happily get wrapped up in, but after we've spent our effort and time learning the differences and how they relate to what we're doing why should we concern ourselves with someone who wants a spoon fed answer? Consider this, if you never move beyond bottle fed pablum (formula) you wouldn't be able to tolerate more robust food like say a steak. If you never learn to derive your own answers to questions like this, you will never move forward as a developer.
Now that I've ranted for a while. Read the material you've already been pointed to, come back with comments and questions of your own and we'll be happy to help and comment.
Cheers,
PS.

JCo 3.0 connectivity issues between Java application on NWCE and ERP

Similar Messages

Maybe you are looking for