JComboBox - Event Name...

Hello.
I'd like to know Which event I must Use to detect the change of selected item...
(I'd like to change Label, according the selected item in the Combo)
Thank you.

You can use any action event handler. I have made one such handler whose code is as follows:
private void combobox_selected(java.awt.event.ActionEvent evt) {                                  
// TODO add your handling code here:
        int a = jComboBox1.getSelectedIndex();
        if(a==0)
        jLabel1.setText("Item 1");
        else if(a==1)
        jLabel1.setText("Item 2");
        else if(a==2)
        jLabel1.setText("Item 3");
        else
        jLabel1.setText("Item 4");
    } 

Similar Messages

  • Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

    Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
    Problem Event Name:                          APPCRASH
      Application Name:                             iTunes.exe
      Application Version:                           10.3.1.55
      Application Timestamp:                    4deec351
      Fault Module Name:                          ntdll.dll
      Fault Module Version:                        6.1.7601.17514
      Fault Module Timestamp:                 4ce7ba58
      Exception Code:                                  c0000005
      Exception Offset:                                0002e3fb
      OS Version:                                          6.1.7601.2.1.0.768.3
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
    Any suggestions?

    I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
    I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up  again as soon as I click on the "Synch photos from" button.

  • Can't download iTunes to new PC lap top. "Itunes has stopped working, event name APPCRASH"

    Hi
    On hols my lap top died and I replaced it while away - so Lap top is Fijian, but my Apple I Tunes account is British - in case that's relevant.
    Trying to download iTunes to the lap top, (windows 7) but I get the same error each time.  I have tried uninstalling and reinstalling the software several times.
    Error message says "iTunes has stopped working" and the details says the following...
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.6.1.7
    Application Timestamp: 4f71aced
    Fault Module Name: QuickTime.qts
    Fault Module Version: 6.0.0.71
    Fault Module Timestamp: 3d2d0310
    Exception Code: c0000005
    Exception Offset: 0013afd8
    OS Version: 6.1.7600.2.0.0.256.48
    Locale ID: 2057
    Additional Information 1: 87ab
    Additional Information 2: 87abfdde4e44868a2d32f6948e899598
    Additional Information 3: c382
    Additional Information 4: c382d1e4d72a2899b9052b0e96ec9563
    Really appreciate any advice, as I NEED to download thepetebox and the new Spiritualized albums for my beach time !!
    Thanks

    Fault Module Name: QuickTime.qts
    Fault Module Version: 6.0.0.71
    Taken at face value, that's an exceptionally old version number for that QuickTime component.
    Do you have the QuickTime Player installed on your system at the moment? If so, is that also currently failing to launch (with or without an error message)?

  • Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

    I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
    1. When I double click on this file (appname.exe), I will see a GUI window.
    2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
    mode. 
    3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
    I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    appkernel.exe
      Application Version:    0.0.0.0
      Application Timestamp:    4f06397d
      Fault Module Name:    MSVCR100.dll
      Fault Module Version:    10.0.40219.325
      Fault Module Timestamp:    4df2be1e
      Exception Offset:    0008af3e
      Exception Code:    c0000417
      Exception Data:    00000000
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    81c8
      Additional Information 2:    81c8f46ed31e8fb8b45fcb166d97e96d
      Additional Information 3:    eec1
      Additional Information 4:    eec16e1825ff7aa9948f00b1f285bbaa
    Thanks in advance!
    LDL

    Hi Brian,
    Thank you for the reply!
    The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
    I just double check my computer, I have the following Visual C++ packages installed on it:
    1. Microsoft Visual C++ 2005 Redistributable
    2. Microsoft Visual C++ 2005 Redistributable (x64)
    3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
    4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
    5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
    6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
    7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
    8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
    9. Microsoft Visual C++ 2010 x64  Redistributable - 10.0.40219
    10. Microsoft Visual C++ 2010 x64  Runtime - 10.0.40219
    11. Microsoft Visual C++ 2010 x86  Redistributable - 10.0.40219
    12. Microsoft Visual C++ 2010 x86  Runtime - 10.0.40219
    13. Microsoft Visual C++ 2010 Express - ENU
    14. Microsoft Visual Studio 2010 Service Pack 1
    15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
    16. Microsoft .NET Framework 4.5.2
    17. Microsoft .NET Framework 4 Multi-Targeting Pack
    From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
    Leo 

  • Quicktime has stopped working message when I open that. Error message: Problem Event Name: BEX

    When I try to open Quicktime I get a message saying it has stopped working. The error message says:
    Problem Event Name: BEX
    Application Name: QuickTimePlayer.exe
    Application Version: 7.73.80.64
    Application Timestamp: 508900dd
    Fault Module Name: QuickTimePlayer.dll
    Fault Module Version: 7.73.80.64
    Fault Module Timestamp: 508900c0
    Exception Offset: 00005b6d
    Exception Code: c0000409
    Exception Data: 00000000
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 3081
    Additional Information: 9da7
    Additional Information 2: 9da7586a62744150d954cf6a5ec876d1
    Additional Infromation 3: db4f
    Additional Information 4: db4f7e51c3cffddbf929f5acfefa97e3
    Similarly, when I try to play media on iTunes, or when my iPhone is backing up, I get a message saying iTunes has stopped working with the error:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 11.0.1.12
    Application Timestamp: 50c8fc7e
    Fault Module Name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 0800a3bc
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 3081
    Additional Information: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: Same as 2

    We'd better check to see if some other application has stashed old versions of QuickTime componentry down in your system files.
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • HP OJ4680 Problem Event Name APPCRASH -after Vista- Win 7 upgrade

    Upgraded a Toshiba Satellite U400 to Winows 7 32-bit from Vista. Connected to my HP Officejet J4680 to print some documents and printer has troubleshooting flag. Windows was unsuccessful at searching for a driver so  I downloaded full software and driver to address this. I get a Runtime error window for Microsoft visual basic C++ "This application has requested the Runtime to terminate in an unusual way. PLease contact the application's support team for more information" and the following problem signature:
      Problem Event Name:                        APPCRASH
      Application Name:                             Setup.exe_HP Installer
      Application Version:                           14.0.301.0
      Application Timestamp:                     4b614229
      Fault Module Name:                          Setup.exe
      Fault Module Version:                        14.0.301.0
      Fault Module Timestamp:                  4b614229
      Exception Code:                                  40000015
      Exception Offset:                                000a75ef
      OS Version:                                          6.1.7601.2.1.0.768.3
      Locale ID:                                             6153
      Additional Information 1:                  67d9
      Additional Information 2:                  67d918b5d2dc6eb7485f13ad2e1b79c1
      Additional Information 3:                  4df0
      Additional Information 4:                  4df0906aa94db94f5f5df73d2e886c50
    Need an urgent solution to print my boarding pass.
    Thanks

    The only solved thread on this I could find on this error is here.
    From what I read, the steps are very lengthy, but they do work.
    Most important thing to do before you continue, is to follow the steps to back up all your files before proceeding.  That being said however, as you need to urgently print a boarding pass, I would suggest borrowing another computer, or printing them out at an airport kiosk if available. The troubleshooting provided in the link above looks like it's a few hours worth of steps.
    Regards, Wally
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • Default event names in iCal?

    Is it possible in iCal to set default event name per calendar, so that when I put in my work schedule each event is titled "work" without me having to type it in each time?

    No (unless you use Automator), however, you could create an additional calendar, one that would represent your work schedule.
    You could also use the (32 year old) Copy-Paste feature.
    If you really have big schedule, you should consider making an automator workflow which would create events with a default name
    Cheers.

  • My itunes will not work and this is the error message. Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     QuickTime.qts_un

    Problem signature:
      Problem Event Name:          BEX
      Application Name:          iTunes.exe
      Application Version:          11.0.1.12
      Application Timestamp:          50c8fc7e
      Fault Module Name:          QuickTime.qts_unloaded
      Fault Module Version:          0.0.0.0
      Fault Module Timestamp:          4ea5d609
      Exception Offset:          653f1040
      Exception Code:          c0000005
      Exception Data:          00000008
      OS Version:          6.1.7601.2.1.0.768.3
      Locale ID:          1033
      Additional Information 1:          0a9e
      Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:          0a9e
      Additional Information 4:          0a9e372d3b4ad19135b953a78882e789

    I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

  • Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

  • Can't install netbeans 8 on windows 7 ultimate 32 bit (Java Platform SE binary has stopped working), problem event name : BEX

    I can't install netbeans 8 on my windows  7 ultimate 32 bit. Please help me.. This is the error message :
    Java Platform SE binary has stopped working
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    java.exe
      Application Version:    8.0.5.13
      Application Timestamp:    53280287
      Fault Module Name:    StackHash_2264
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    00000040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    2264
      Additional Information 2:    2264db07e74365624c50317d7b856ae9
      Additional Information 3:    875f
      Additional Information 4:    875fa2ef9d2bdca96466e8af55d1ae6e
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    1. I had similar problem and upgrade of BIOS has helped.
    2. Try Oracle support forum if 1 does not help.
    Rgds
    Milos

  • SBS 2008 'Set up your Internet address" crashes (Problem Event Name:_CLR20r3)

    Hello.
    We try Set up your Internet address and after wizard start we get:Description:
      Stopped working
    Problem signature:
      Problem Event Name:    CLR20r3
      Problem Signature 01:    dpcw.exe
      Problem Signature 02:    6.0.5601.8538
      Problem Signature 03:    4d24e2a5
      Problem Signature 04:    mscorlib
      Problem Signature 05:    2.0.0.0
      Problem Signature 06:    53a11b76
      Problem Signature 07:    20cd
      Problem Signature 08:    143
      Problem Signature 09:    N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
      OS Version:    6.0.6002.2.2.0.305.9
      Locale ID:    1032
    Read our privacy statement:
      http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
    At DPCW.log from C:\Program Files\Windows Small Business Server\Logs we get:
    [7452] 150222.193429.5196: General: Initializing...C:\Program Files\Windows Small Business Server\Bin\DPCW.exe
    [7452] 150222.193429.7166: CoreNet: Retrieving LastBasicConfigSuccessful flag from registry
    [7452] 150222.193429.7196: CoreNet: LastBasicConfigSuccessful found.
    [7452] 150222.193430.3966: CoreNet: Retrieving Domain Name Max Length from NetworkConfig
    [7452] 150222.193431.8486: WizardChainEngine Next Clicked: Going to page {0}.: Networking.Wizards.NetSvcWizard.DoYouOwnDomainPage
    [7452] 150222.193438.4016: WizardChainEngine Next Clicked: Going to page {0}.: Networking.Wizards.NetSvcWizard.DoYouWantToTransferPage
    [7452] 150222.193442.9856: WizardChainEngine Next Clicked: Going to page {0}.: Networking.Wizards.NetSvcWizard.ChooseDomainNamePage
    [7164] 150222.193443.0066: CoreNet: Retrieving MS Domain Referral Service URL from NetworkConfig
    [7164] 150222.193443.0076: CoreNet: No MS Domain Referral service URL is defined in NetworkConfig
    [7164] 150222.193444.4326: CoreNet: Retrieving extra domain registrar from NetworkConfig
    [7164] 150222.193444.4326: CoreNet: No extra registrar information defined in NetworkConfig
    [7164] 150222.193444.4326: NetworkingServices: Initializing Available TLDs returned success.
    [7452] 150222.193624.7756: Wizard: WizardChainEngine Back clicked: Going to page Networking.Wizards.NetSvcWizard.DoYouWantToTransferPage.
    [7452] 150222.193626.6296: WizardChainEngine Next Clicked: Going to page {0}.: Networking.Wizards.NetSvcWizard.ProvidLoginInfomationPage
    [7452] 150222.193629.0626: CoreNet: Getting root cert
    [7452] 150222.193629.1216: CoreNet: CA ConfigString: XXXXXXX.XXXXXXX.local\XXXXXXX-CA
    [7452] 150222.193629.1696: CoreNet: CA ConfigString: XXXXXXX.XXXXXXX.local\XXXXXXX-CA
    [7452] 150222.193629.1786: CoreNet: Converting to bytes
    [7452] 150222.193629.1806: CoreNet: Leaf Cert Thumbprint is: EBB212D525E9D0C34B1C50870A50B372FF781FC8
    [7452] 150222.193629.1836: CoreNet: ThumbPrint: EBB212D525E9D0C34B1C50870A50B372FF781FC8
    [7452] 150222.193629.1836: CoreNet: Look for cert in My
    [7452] 150222.193629.1846: CoreNet: Opening Store
    [7452] 150222.193629.1856: CoreNet: Finding cert
    [7452] 150222.193629.1866: CoreNet: certcoll.Count: 1
    [7452] 150222.193629.1866: CoreNet: Closing Store
    [7452] 150222.193629.1876: Wizard: WizardChainEngine Next Clicked: Last page, so the wizard isdone, closing wizard frame and returning
    [7164] 150222.193629.5556: AdminTME: AdminDataLink Running Task: CommitterSequenceTask
    [7164] 150222.193629.6636: CoreNet: Deleting Domain Config Url from registry
    [7164] 150222.193629.6656: CoreNet: Deleting domain provider homepage Url from registry
    [7164] 150222.193629.6666: CoreNet: Deleting domain provider name from registry
    [7164] 150222.193629.6666: CoreNet: Deleting domain provider logo from registry
    [7164] 150222.193629.6716: CoreNet: Deleting provider service data 1 from registry.
    [7164] 150222.193629.6726: CoreNet: Deleting provider service data 2 from registry.
    [7164] 150222.193629.6826: CoreNet: CommonName: remote.impantokratoros.gr
    [7164] 150222.193629.6866: CoreNet: CN to validate: CN=remote.XXXXXXX.gr,
    [7164] 150222.193629.7116: CoreNet: Returning CN of CN=remote.XXXXXXX.gr,
    [7164] 150222.193629.7116: CoreNet: sCommonName: CN=remote.XXXXXXX.gr,
    [7164] 150222.193629.7246: CoreNet: Creating Request
    [7164] 150222.193629.7256: CoreNet: CA Name is: XXXXXXX-XXXXXXX-CA
    [7164] 150222.193629.7256: CoreNet: CA Name: XXXXXXX-XXXXXXX-CA
    [7164] 150222.193631.2636: CoreNet: Submitting Request
    [7164] 150222.193631.2756: CoreNet: CA ConfigString: XXXXXXX.XXXXXXX.local\XXXXXXX-XXXXXXX-CA
    [7164] 150222.193631.4296: CoreNet: Certificate submission returned: 3
    [7164] 150222.193631.4316: CoreNet: Installing Certficate response from CA
    [7164] 150222.193631.4996: CoreNet: Writing Leaf Cert data to NetworkConfig
    [7164] 150222.193631.5006: CoreNet: Leaf Cert Thumbprint is: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193631.5016: CoreNet: ThumbPrint: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193631.5016: CoreNet: Look for cert in My
    [7164] 150222.193631.5016: CoreNet: Opening Store
    [7164] 150222.193631.5026: CoreNet: Finding cert
    [7164] 150222.193631.5026: CoreNet: certcoll.Count: 1
    [7164] 150222.193631.5026: CoreNet: Closing Store
    [7164] 150222.193631.5036: CoreNet: Creating AccessRule for NetworkServiceSid
    [7164] 150222.193631.8646: CoreNet: Using WMI QueryString: Select * From MicrosoftDNS_Zone Where Name="remote.XXXXXXX.gr"
    [7164] 150222.193632.2556: CoreNet: Using WMI QueryString: Select * From MicrosoftDNS_Zone Where Name="remote.XXXXXXX.gr"
    [7164] 150222.193632.4586: CoreNet: Using WMI QueryString: Select * From MicrosoftDNS_Zone Where Name="remote.XXXXXXX.gr"
    [7164] 150222.193632.4956: CoreNet: Retrieving internal NIC GUID from NetworkConfig
    [7164] 150222.193632.4966: CoreNet: Internal NIC GUID from NetworkConfig is d48df1d0-c548-4a06-8b59-ab71532be356
    [7164] 150222.193632.5506: CoreNet: Retreiving MAC Address of the NIC to ignore from InfoXmlConfig
    [7164] 150222.193632.5526: CoreNet: Loading info xml configuration from: C:\Program Files\Windows Small Business Server\Data\Info.xml
    [7164] 150222.193633.0686: CoreNet: No NICs to ignore in InfoXmlConfig
    [7164] 150222.193633.0686: CoreNet: Retrieving MAC Address of the NIC to ignore from NetworkConfig
    [7164] 150222.193633.0686: CoreNet: No NICs to ignore in NetworkConfig
    [7164] 150222.193634.0536: CoreNet: Added NIC: Local Area Connection
    [7164] 150222.193634.4646: CoreNet: Added NIC: Local Area Connection 2
    [7164] 150222.193634.7586: CoreNet: Local NIC GUID is d48df1d0-c548-4a06-8b59-ab71532be356
    [7164] 150222.193634.8236: CoreNet: Using WMI QueryString: Select * From MicrosoftDNS_AType Where ContainerName="remote.XXXXXXX.gr" and OwnerName="remote.XXXXXXX.gr" and IPAddress="192.168.10.2"
    [7164] 150222.193634.8236: CoreNet: WMI Scope: \\XXXXXXX\root\microsoftdns
    [7164] 150222.193634.8356: CoreNet: Found 0 resource records of type A
    [7164] 150222.193634.8676: CoreNet: CIFPD Succeded
    [7164] 150222.193634.9926: CoreNet: Leaf Cert Thumbprint is: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193634.9936: CoreNet: ThumbPrint: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193634.9946: CoreNet: Calling FindCert()
    [7164] 150222.193634.9946: CoreNet: ThumbPrint: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193634.9946: CoreNet: Look for cert in My
    [7164] 150222.193634.9946: CoreNet: Opening Store
    [7164] 150222.193634.9966: CoreNet: Finding cert
    [7164] 150222.193634.9966: CoreNet: certcoll.Count: 1
    [7164] 150222.193634.9966: CoreNet: Closing Store
    [7164] 150222.193634.9966: CoreNet: Getting Hash
    [7164] 150222.193635.2026: IISConfigLib: Enabling SSL with params: website name: SBS Web Applications, ipNumOfInterfaceToBindWithSsl: *, port: 443, host header:
    [7164] 150222.193635.3986: IISConfigLib: set binding information for website name: SBS Web Applications, ipNumOfInterfaceToBindTo: *, port: 80, host header: remote.impantokratoros.gr
    [7164] 150222.193635.4826: IISConfigLib: Enabling SSL with params: website name: SBS SharePoint, ipNumOfInterfaceToBindWithSsl: *, port: 987, host header:
    [7164] 150222.193650.4556: AdminTME: Status: TaskId = Networking.Wizards.NetSvcWizard.ConfigureWorkFromHomeWebsite, RootTaskId = Networking.Wizards.NetSvcWizard.ConfigureWorkFromHomeWebsite, Success: False, Warning: False, Continue: True, Message:
    [7452] 150222.193650.4816: AdminTME: Committer: Completed called
    [7452] 150222.193650.4956: Exception:
    An exception of type 'Type: System.NullReferenceException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
    Timestamp: 02/22/2015 19:36:50
    Message: Object reference not set to an instance of an object.
    Stack:    at Microsoft.SharePoint.Administration.SPPersistedObject..ctor(String name, SPPersistedObject parent, Guid id)
           at Microsoft.SharePoint.Administration.SPPersistedObject..ctor(String name, SPPersistedObject parent)
           at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject..ctor(String name, SPPersistedObject parent)
           at Microsoft.SharePoint.Administration.SPService..ctor(String name, SPFarm farm)
           at Microsoft.SharePoint.Administration.SPWebService..ctor(String name, SPFarm farm)
           at Microsoft.WindowsServerSolutions.Common.IWorker.WSSConfig.CWSSConfig.IsSiteGuidValid(Guid sharePointSiteId)
           at Microsoft.WindowsServerSolutions.Networking.Wizards.NetSvcWizard.TaskConfigureWorkFromHomeWebsite.Run(ITaskDataLink dataLink)
           at Microsoft.WindowsServerSolutions.TaskManagement.Admin.LightweightDataLink.Run(TaskId taskId, IAssemblyTask task, CompositeTask parentTask)
           at Microsoft.WindowsServerSolutions.TaskManagement.Admin.SequentialTask.Run(ITaskDataLink dataLink)
           at Microsoft.WindowsServerSolutions.TaskManagement.Admin.AdminDataLink.Run(TaskId taskId, IAssemblyTask task)
           at Microsoft.WindowsServerSolutions.TaskManagement.Admin.Committer.DoWork(Object sender, DoWorkEventArgs e)
           at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    We have change for security all the name of server and domain with XXXXXXX.
    Can someone help? We read all google results for that problem and we cant fix it..
    Thanks.

    Hi IntelcomGR,
    Would you please let us know current situation of this issue? Did you refer to Binu Kumar's suggestion and check SharePoint on the SBS server? Any find?
    I also suggest that you should run
    SBS BPA tool to check the status of the SBS server. Meanwhile, please run
    sfc /scannow command to scan all protected system files.
    If any update, please feel free to let us know.
    Bes regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Event name not appearing in calendar

    We currently have Novell Groupwise 8 as our email system and we are syncing with the iPad by using the Microsoft Exchange, when creating a new event, the event name does not appear on the calendar?? Event names for previously created events are showing but not a newly created event. On the calendar, the start time of the event shows but not the event name, it appears as a "New Event" not what has been listed in the subject line when the event is created.  It is not consistent and I can't figure out what is causing the problem...

    this is even weirder - when I backed out of the forum page and re-entered the discussion via the pulldown menu on the left hand side of the support homepage (iCal/then discussion forums link next to the iCal icon), the post message link appears. Coming into the discussions via the support link on the apple homepage, then discussions link under the Mac graphic, doesn't allow me to post....

  • Why don't my iphoto event names match up to my iphoto master file names?

    Yosemite 10.10
    iPhoto 9.6
    MacBook Pro 2009
    I recently downloaded Yosemite, which has slowed my laptop down significantly. This has prompted me to transfer all large files - photos, movies and music off my laptop and onto an external hard drive (in addition to my time machine backup hard drive).
    I was instructed (at the Apple Store) to open Finder then Pictures > iPhoto Library. Then to right click on the iPhoto Library folder and select 'show package contents', this reveals a large list of folders but I understand that the Masters folder is the one to care about with respect to back ups. When I open up Masters I can see 8 folders labelled 2007 - 2014. In each of these folders are other folders housing all the jpeg files.
    THE PROBLEM:
    For some reason in the 2007-2009 folders the Master file names match up to the Event names in iPhoto. This is great and makes sense! However, after 2009 everything gets really messed up in the Masters folder - despite my iPhoto Library being meticulously organised into Events that are all labelled. For example, when I open up the 2014 folder the path looks like this 2014 > 10 > 06 > 20141006-214510 > which then houses the jpeg images. It looks to me like these folders represent upload events as opposed to the Events that I organised them into in the front end of iPhoto. WHY!?!
    THE QUESTIONS:
    Why is this happening? And can I fix it so that it doesn't happen when I next import photos into iPhoto?
    Should I just stop using iPhoto?
    What happens if I change the names of the Master folders in the back end of iPhoto to reflect the Event names in the front end? Would it be better to just organise them on my hard drive?
    Thank you

    1. It's not a problem as you never ever access your photos in this way.
    2. If you want to back up your original photos you do this via the Export function: File -> Export
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.
    3. None of this saves space on your HD. To do that you need to move your Library from the HD to the external:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    a. Quit iPhoto
    b. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    c. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    d. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    4. That particular Apple Genius isn't.
    As to the specific questions:
    Why is this happening? And can I fix it so that it doesn't happen when I next import photos into iPhoto?
    It's happening as that is how iPhoto works and there is nothing ti fix. Exporting makes the issue redundant.
    Should I just stop using iPhoto?
    Why?
    What happens if I change the names of the Master folders in the back end of iPhoto to reflect the Event names in the front end?
    You'll corrupt the Library. And it's unnecessary.
    Would it be better to just organise them on my hard drive?
    No.

  • ITunes stops working moments after selecting . Microsoft offers to find solution but no response?Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.2.2.3   Application Timestamp:     5383f31a   Fault Module Name: 

    Microsoft report gives details of problem:
    Problem Event Name:
    BEX
      Application Name:
    iTunes.exe
      Application Version:
    11.2.2.3
      Application Timestamp:
    5383f31a
      Fault Module Name:
    StackHash_0a9e
      Fault Module Version:
    0.0.0.0
      Fault Module Timestamp:
    00000000
      Exception Offset:
    00000008
      Exception Code:
    c0000005
      Exception Data:
    00000008
      OS Version:
    6.1.7601.2.1.0.768.3
      Locale ID:
    2057
      Additional Information 1:
    0a9e
      Additional Information 2:
    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:
    0a9e
      Additional Information 4:
    0a9e372d3b4ad19135b953a78882e789
    I have tried reloading the iTunes player but same thing happens after selecting it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • My itunes wount open when i try to open it this message comes up Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     10.6.3.25   Application Timestamp:     4fd16377   Fault Module Name:     CRYPTU

    when i try to open my Itunes this Message comes up
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    iTunes.exe
      Application Version:    10.6.3.25
      Application Timestamp:    4fd16377
      Fault Module Name:    CRYPTUI.dll_unloaded
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    4ce7b847
      Exception Offset:    68221040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    5129
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Taken at face value, you're having trouble with a Windows operating system file there.
    Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

Maybe you are looking for

  • Photoshop Crashing when opening any file

    I have tried deleting master fonts per another forum's recommendation. I have done all updates to everything... Here is the only thing I know that I did differently that resulted in the crashing: I deleted Linotype's Font Explorer. I only had their t

  • External SWF problems

    i have a few SWF files loading into the main SWF. I am using a blank movie clip to load the external SWFs. loadMovie("photos-color.swf", "color"); That is actionscript I use to load the external SWF into the main SWF. I go to one page on my site, dow

  • Standby Redo log creation

    DB version: 11.2 OS : AIX 6.1 We have a 2 node RAC. We have one Disk group for all datafiles, tempfiles, redo logs,..etc. Currenly in our primary DB, Redo logs look like SQL> SELECT a.group#, b.thread#, a.member, b.bytes FROM v$logfile a, v$log b WHE

  • Hi reg report

    Hi all There is a report for vendor price comparision list. for 12 months .,, In that in each vendor , i have to give green color for highest price  and red colour for lowest price.,,  how shuld I ?? In each row, i should find the max and min dynamic

  • Displaying query values horizontally

    I have a subreport with a query that returns a single field. WHat I'd like to do is display it as a list on one line, as opposed to showing each item on its own line. I couldn't find a straightforward way to do this, so I tried to come up with a hack