Jcontrol.exe in SAP MMC turns "GREY" after start.--- Urgent
Hi, I am facing one problem with SAP J2EE engine.
In SAP MMC all services are green, only "Jcontrol.exe" is Grey. I restarted the server several times but every time it starts and then just becomes "GREY" Below is the description of "Developer Trace" which I have copied from SAP MMC console.
Any help in this regards would be highly appreciated. It is urgent.
Thanks.
Ashish Patel.
JStartupStartJLaunch: program = D:\usr\sap\DNW\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = D:\usr\sap\DNW\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=D:\usr\sap\DNW\SYS\profile\DNW_JC00_dgntwas
-> arg[02] = -DSAPINFO=DNW_00_bootstrap
-> arg[03] = -file=D:\usr\sap\DNW\JC00\j2ee\cluster\instance.properties
-> arg[04] = -nodeName=bootstrap_ID3314950
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_3148
-> arg[07] = -jvmOutFile=D:\usr\sap\DNW\JC00\work\jvm_bootstrap_ID3314950.out
-> arg[08] = -stdOutFile=D:\usr\sap\DNW\JC00\work\std_bootstrap_ID3314950.out
-> arg[09] = -locOutFile=D:\usr\sap\DNW\JC00\work\dev_bootstrap_ID3314950
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=D:\usr\sap\DNW\SYS\profile\DNW_JC00_dgntwas
-> lib path = PATH=C:\j2sdk14209\jre\bin\server;C:\j2sdk14209\jre\bin;D:\usr\sap\Python\.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;D:\usr\sap\DNW\SCS01\exe;D:\usr\sap\DNW\JC00\exe;D:\usr\sap\DNW\SYS\exe\run
-> exe path = PATH=C:\j2sdk14209\bin;D:\usr\sap\DNW\JC00\j2ee\os_libs;D:\usr\sap\Python\.;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;D:\usr\sap\DNW\SCS01\exe;D:\usr\sap\DNW\JC00\exe;D:\usr\sap\DNW\SYS\exe\run
[Thr 3152] Wed Aug 23 15:01:34 2006
[Thr 3152] *** ERROR => invalid return code of process [bootstrap_ID3314950] (exitcode=-2) [jstartxx.c 1433]
[Thr 3152] JControlExecuteBootstrap: error executing bootstrap node [bootstrap_ID3314950] (rc=-2)
[Thr 3152] JControlCloseProgram: started (exitcode = -2)
[Thr 3152] JControlCloseProgram: good bye... (exitcode=-2)
==========================================
Hi,
Try this:
1.Stop all SAP instances
2.Stop the DB
3.Stop the listner
Logoff, and logon to the server as <sid>adm
then:
1.Start the listner (dos window ---> lsnrctl start)
2.Start the DB
3.Start the SAP Instances
It should start correctly now.
Kind Regards
Ian Henderson
Similar Messages
-
Jstart.exe process in sap mmc is not getting started
Hi,
The jstart.exe process of sap mmc (management console/server) is not getting started.
The status for this process is "starting the processes". Need help!
The developer trace is as follows :
trc file: "dev_jstart.7668", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7668
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:03:13 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F Mon Oct 08 10:03:13 2012
F ********************************************************************************
F Java environment properties (C:\usr\sap\SV1\J02\work\jstart.jvm)
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 7652] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
F
F [Thr 7652] Mon Oct 08 10:03:14 2012
F [Thr 7652] *** LOG => connected to Enqueue Server.
F [Thr 7652] *** LOG => connected to Message Server.
F [Thr 7652] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 1.
F
F Mon Oct 08 10:03:15 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_deployment.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_deployment.out
F stderr : C:\usr\sap\SV1\J02\work\std_deployment.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Deploy_offline started with pid 7968
F ********************************************************************************
F [Thr 7652] *** LOG => Process deployment started (pid 7968).
F
F [Thr 7652] Mon Oct 08 10:03:19 2012
F [Thr 7652] *** LOG => Process deployment stopping (pid 7968).
F
F [Thr 6972] Mon Oct 08 10:03:19 2012
F [Thr 6972] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process deployment stopped (pid 7968).
F [Thr 7652] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 1 completed.
F [Thr 7652] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\SV1\J02\exe\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\SV1\J02\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 2.
F
F Mon Oct 08 10:03:20 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\SV1\J02\exe\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\SV1\J02\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_bootstrap.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F stderr : C:\usr\sap\SV1\J02\work\std_bootstrap.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process Instance_bootstrap started with pid 7952
F ********************************************************************************
F [Thr 7652] *** LOG => Process bootstrap started (pid 7952).
F
F [Thr 7652] Mon Oct 08 10:03:47 2012
F [Thr 7652] *** LOG => Process bootstrap running (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (RUNNING @ 0, INACTIVE).
F
F [Thr 7652] Mon Oct 08 10:04:10 2012
F [Thr 7652] *** LOG => Process bootstrap stopping (pid 7952).
F
F [Thr 4436] Mon Oct 08 10:04:10 2012
F [Thr 4436] *** LOG => Signal 13 SIGCHLD.
F [Thr 7652] *** LOG => Process bootstrap stopped (pid 7952).
F [Thr 7652] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Run level 2 completed.
F [Thr 7652] *** LOG => Starting run level 3.
F ********************************************************************************
F Java process [debugproxy] properties:
F section name : debugproxy
F config file : C:\usr\sap\SV1\J02\exe\dproxy.properties
F node name : Debug_Proxy
F home directory : C:\usr\sap\SV1\J02/j2ee/rdbg.proxy
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F ********************************************************************************
F ICM process [icm] properties:
F section name : icm
F config file : C:\usr\sap\SV1\J02\exe\icm.properties
F node name : ICM
F home directory : C:\usr\sap\SV1\J02\work
F shutdown timeout : 122000 ms
F exit timeout : 7000 ms
F ********************************************************************************
F ********************************************************************************
F Java process [server0] properties:
F section name : ID24836450
F config file : C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F node name : server0
F home directory : .
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : true
F debugger active : false
F ********************************************************************************
F [Thr 7652] *** LOG => Instance state is "Starting the processes" (STARTING @ 0, INACTIVE).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 0.
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\icman.EXE
F arg[ 1] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 2] = -nodeId=1
F arg[ 3] = -f
F arg[ 4] = C:\usr\sap\SV1\J02\work\\dev_icm
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_icm.out
F stderr : C:\usr\sap\SV1\J02\work\std_icm.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process ICM started with pid 7336
F ********************************************************************************
F [Thr 7652] *** LOG => Process icm started (pid 7336).
F
F [Thr 7652] Mon Oct 08 10:04:12 2012
F [Thr 7652] *** LOG => Process icm running (pid 7336).
F [Thr 7652] *** LOG => Starting nodes: runlevel 3, phase 1.
F
F Mon Oct 08 10:04:16 2012
F ********************************************************************************
F Starting process: C:\usr\sap\SV1\J02\exe\jstart.EXE
F arg[ 1] = -nodeId=2
F arg[ 2] = pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
F arg[ 3] = -DSAPINFO=SV1_02_server0
F arg[ 4] = -hostvm
F arg[ 5] = -nodeName=ID24836450
F arg[ 6] = -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
F arg[ 7] = -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
F arg[ 8] = -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
F arg[ 9] = -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F libPath : PATH=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F stdout : C:\usr\sap\SV1\J02\work\std_server0.out
F stderr : C:\usr\sap\SV1\J02\work\std_server0.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process server0 started with pid 7616
F ********************************************************************************
F [Thr 7652] *** LOG => Process server0 started (pid 7616).Hi Ravi,
Thanks for your quick response.
Where do I find the default trace for this?
The server0 process status is "Waiting to start". The developer trace for server0 is as follows :
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7616
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 10:04:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 7280] MtxInit: 10002 0 2
I [Thr 7280] MPI: dynamic quotas disabled.
I [Thr 7280] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 7280] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 7280] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 7280] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 7280] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 10:04:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7616
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 7364] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 7280] Mon Oct 08 12:28:13 2012
F [Thr 7280] *** LOG => Command STOP 0 {}.
F [Thr 7280] *** LOG => Result for STOP 0 {}: 0 ok, 00000000.
F
F [Thr 7280] Mon Oct 08 12:28:33 2012
F [Thr 7280] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:28:33 2012
J
J ================================================================================
F [Thr 7280] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 684] Mon Oct 08 12:28:33 2012
M [Thr 684] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 5508
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:28:34 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 500] MtxInit: 10002 0 2
I [Thr 500] MPI: dynamic quotas disabled.
I [Thr 500] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 500] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 500] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 500] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 500] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:28:34 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=5508
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4136] *** LOG => SfCJavaVm: abort hook is called.
F
F [Thr 500] Mon Oct 08 12:29:02 2012
F [Thr 500] *** LOG => Command DUMP_THREADS 0 {}.
J
J ================================================================================
J Java thread dump : Mon Oct 08 12:29:02 2012
J
J ================================================================================
F [Thr 500] *** LOG => Result for DUMP_THREADS 0 {}: 0 ok, 00000000.
M
M [Thr 5068] Mon Oct 08 12:29:02 2012
M [Thr 5068] CCMS: CCMS Monitoring Cleanup finished successfully.
trc file: "dev_server0", trc level: 1, release: "720"
sysno 02
sid SV1
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 63
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
pid 7704
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS All, egi
Mon Oct 08 12:29:17 2012
* trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\SV1\J02\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=2
arg[ 3] : pf=\\INLD50787371A\sapmnt\SV1\SYS\profile\SV1_J02_INLD50787371A
arg[ 4] : -DSAPINFO=SV1_02_server0
arg[ 5] : -hostvm
arg[ 6] : -nodeName=ID24836450
arg[ 7] : -file=C:\usr\sap\SV1\J02\j2ee\cluster\instance.properties
arg[ 8] : -jvmFile=C:\usr\sap\SV1\J02\work\jstart.jvm
arg[ 9] : -traceFile=C:\usr\sap\SV1\J02\work\dev_server0
arg[10] : -javaOutFile=C:\usr\sap\SV1\J02\work\jvm_server0.out
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F Java environment properties
F root directory : C:\usr\sap\SV1\J02\exe\sapjvm_6
F vendor : SAP AG
F version : 1.6.0_17
F cpu : amd64
F java vm type : server
F java vm version : 6.1.018
F jvm library name : jvm.dll
F library path : C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin
F executable path : C:\usr\sap\SV1\J02\exe\sapjvm_6\bin
F SAP extensions : available
F ********************************************************************************
I [Thr 4980] MtxInit: 10002 0 2
I [Thr 4980] MPI: dynamic quotas disabled.
I [Thr 4980] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M [Thr 4980] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
M [Thr 4980] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Ext.
M [Thr 4980] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 4980] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
F Mon Oct 08 12:29:17 2012
F ********************************************************************************
F SAP Java VM arguments:
F arg[ 0] = vfprintf
F arg[ 1] = abort
F arg[ 2] = exit
F arg[ 3] = -XmonGcCallback
F arg[ 4] = -XdebugStateChangeCallback
F arg[ 5] = -DSAPJStartVersion=720, patch 68, changelist 1198183, NTAMD64, optU (Oct 20 2010, 01:55:49)
F arg[ 6] = -Xjvmx
F arg[ 7] = -XsapSystem:02
F arg[ 8] = -DSAPSTARTUP=1
F arg[ 9] = -DSAPSYSTEM=02
F arg[10] = -DSAPSYSTEMNAME=SV1
F arg[11] = -DSAPMYNAME=INLD50787371A_SV1_02
F arg[12] = -DSAPDBHOST=INLD50787371A
F arg[13] = -DSAPINFO=SV1_02_server0
F arg[14] = -Dj2ee.dbhost=INLD50787371A
F arg[15] = -Dsun.java.launcher=jstart
F arg[16] = -Dsun.java.command=com.sap.engine.boot.Start
F arg[17] = -Djstartup.mode=JSTART
F arg[18] = -Djstartup.whoami=server
F arg[19] = -Djstartup.ownProcessId=7704
F arg[20] = -Djstartup.ownHardwareId=Q0723431166
F arg[21] = -Djstartup.debuggable=yes
F arg[22] = -DLoadBalanceRestricted=no
F arg[23] = -XdebugPortRange:50221-50221
F arg[24] = -Denv.class.path=
F arg[25] = -Dsys.global.dir=C:\usr\sap\SV1\SYS\global
F arg[26] = -Dapplication.home=C:\usr\sap\SV1\J02\exe
F arg[27] = -Djava.class.path=C:\usr\sap\SV1\J02\exe\jstart71.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\jvmx_tools.jar;C:\usr\sap\SV1\J02\exe\jre\lib\iqlib.jar;C:\usr\sap\SV1\J02\exe\sapjvm_6\lib\tools.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\sap.com~tc~bl~jkernel_boot~impl.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\jaas.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\system\sap.com~tc~bl~bytecode~library.jar;C:\usr\sap\SV1\J02\j2ee\cluster\bin\boot\memoryanalyzer.jar
F arg[28] = -Djava.library.path=C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin\server;C:\usr\sap\SV1\J02\exe\sapjvm_6\jre\bin;C:\usr\sap\SV1\J02\j2ee\os_libs;C:\usr\sap\SV1\J02\exe\sapjvm_6\bin;C:\usr\sap\SV1\J02\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Java\jdk1.6.0_23\bin;C:\usr\sap\SV1\SYS\exe\uc\NTAMD64;C:\sapdb\clients\SV1\bin;C:\sapdb\clients\SV1\pgm;C:\sapdb\programs\bin
F arg[29] = -XX:PermSize=1024m
F arg[30] = -Xmx2048m
F arg[31] = -XX:MaxNewSize=410m
F arg[32] = -XX:MaxPermSize=1024m
F arg[33] = -Xms2048m
F arg[34] = -XX:NewSize=410m
F arg[35] = -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
F arg[36] = -Djavax.management.builder.initial=com.sap.pj.jmx.server.interceptor.InterceptorChainBuilder
F arg[37] = -Djmx.invoke.getters=true
F arg[38] = -Djava.security.policy=./../bin/kernel/java.policy
F arg[39] = -Djava.security.egd=file:/dev/urandom
F arg[40] = -Djava.awt.headless=true
F arg[41] = -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
F arg[42] = -Drdbms.driverLocation=C:\sapdb\clients\SV1\runtime\jar\sapdbc.jar
F arg[43] = -Djava.io.tmpdir=./temp
F arg[44] = -Dsun.lang.ClassLoader.allowArraySyntax=true
F arg[45] = -Djava.protocol.handler.pkgs=com.sap.engine.httpdsrclient.protocols|iaik.protocol
F arg[46] = -Dnetworkaddress.cache.ttl=10
F arg[47] = -DSAPJVM_EXTENSION_COMMAND_HANDLER=com.sap.tools.memory.protocol.ProtocolHandler
F arg[48] = -Djco.jarm=1
F arg[49] = -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
F arg[50] = -agentpath:C:\PROGRA~1\JPROFI~1\bin\WINDOW~1\jprofilerti.dll==port=8849
F arg[51] = -XX:+UseConcMarkSweepGC
F arg[52] = -XX:TargetSurvivorRatio=90
F arg[53] = -verbose:gc
F arg[54] = -XX:+DumpDetailedClassStatisticOnOutOfMemory
F arg[55] = -XX:+PrintGCDetails
F arg[56] = -XX:MaxErrorQueueLength=200
F arg[57] = -XX:+PrintGCTimeStamps
F arg[58] = -XX:+DisableExplicitGC
F arg[59] = -XX:SoftRefLRUPolicyMSPerMB=1
F arg[60] = -XX:-StringInternTableInPermGen
F arg[61] = -XX:SurvivorRatio=9
F arg[62] = -XX:+HeapDumpOnOutOfMemoryError
F arg[63] = -XX:HeapDumpPath=OOM.hprof
F arg[64] = -XX:-TraceClassUnloading
F arg[65] = -Xss2097152
F ignore unrecognized options : no
F ********************************************************************************
J JVMX version - Sep 16 2010 15:40:24 - 61_REL - optU - windows amd64 - 6 - bas2:142976 (mixed mode)
J Error occurred during initialization of VM
J Could not find agent library in absolute path: C:\PROGRA?1\JPROFI?1\bin\WINDOW?1\jprofilerti.dll
F [Thr 4736] *** LOG => SfCJavaVm: abort hook is called. -
Mac air turning off after starting
Mac air turning off after starting
Hello
Did you check the power saver settings?
Push he first slider far to the right up to never so that your Mac Mini never stops.
Also untick the suspend hard drive activity as soon as possible to avoid lag on your Minecraft server.
Best wishes -
Screen does not turn on after start up, but after standby on Satellite M100
Hi,
I have quite some experience with computers and laptops, but this problem exhausted all my knowledge.
My girlfriend has a Toshiba Satellite M100, PSMA1E. It runs Windows XP, currently on SP3.
The laptop always had shutdown/stand bye issues. It would go on stand bye and the screen would not come back. She usually would turn it off manually (holding the power button) and turn it on again.
Same thing happened last week, but with me. I turned it off holding the power button but when I turned it back on the screen was completely black. After a few attempts I realized that everything was working; I could hear XP booting and the usual sound files but there was no way I could get the screen working.
The strangest thing is that the CMOS/BIOS screen, the first one with the Toshiba logo, also does not show up. If it was a OS problem I thought I would be able to access the BIOS at least, but that doesn't work. Fn+F5 also doesn't work.
Then something even stranger happened. I was turning it on and off with keyboard shortcuts and I realized that if I put it on stand bye using shortcuts and then turn it back on the screen turns on perfectly fine (there is some resolution adjustment cause icons are out of place, but it works perfectly well).
From that on I tried everything I know. BIOS update, all Windows XP updates, all Toshiba QuickFix, cleaning the registry with different tools, uninstalling and reinstalling the video driver (ATI Radeon X1400), HotKeys utility, Power Saver Utility, Toshiba Hardware Tools, looking at start up programs, services, everything I could possibly think off.
What really puzzles me is that the Toshiba start up screen won't show up. I can't access the BIOS, but I tried restoring BIOS standard values through Toshiba Hardware Tools. It didn't work. I don't even know if reinstalling XP will work because every time I turn it on it's all black and I need to do the stand bye/turn back on trick.
When I plugged it on a external monitor I could see the whole start up process (BIOS initial screen and Windows). I then tried to access the display configuration of the video driver but it would only show the external monitor. It would only detect the laptop screen after a stand bye/turn back on, and then it worked perfectly well: two simultaneous screens, extended screen, everything. Ah, changing the BIOS from Auto-Select to LCD+external monitor also does not work.
I'm really puzzled here and I can't figure this one out. I really don't think it's a hardware issue, because the screen works 100% after the stand bye. I guess XP is making something during shut down that completely 'shuts down' my screen, even after boot, and then I can only turn it on with the stand bye thing.
Any help would be really appreciated!
Best,Hi mate,
that whole story sounds really weirdo since after reading all this and knowing that youve tried almost everything doesnt makes it better.. :/
Usually I would say: update your BIOS, but you already updated everything. This problem could be BIOS related since the initialization of the hardware after a standby is controlled by the chipset trough the BIOS.
I guess it could also be something with the background light of the LCD screen (failed initialization after waking up), you can check this by reproducing the situation with the black screen and holding some light near the screen. If you can see some schemes on the screen (something like desktop, etc..) then it could be the background lighting. In such case try to reinstall the operating system and update all installed drivers to the newest version (yes I know, sounds like more pain).
Otherwise, click [HERE|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT], find the nearest authorized service partner in your country, contact them and ask them for a hardwarecheckup. Maybe its really a hardware related issue..
Greets and good luck -
Screen will turn dark after start up
My screen will show the apple and clock turning after powering on then the screen goes dark but I can still see and move the cursor. Can anyone help?
Howdy Marsha0930,
Is your Mac showing a gray screen with a spinning gear? If it is, this would indicate a startup issue which can be resolve by trying the suggested resolutions in the article below.
Mac OS X: Gray screen appears during startup
I hope this helps.
-Jason -
Hello. I have some problems with my Powerbook G4 15" (last generation). While most of airport problem is, it can't be turned on, but why do my airport and bluetooth automatically turn on as well as some application like microsoft word and VLC everytime after I start up my Powerbook?. I have no clue why those happen. It was only airport before, but then some application as well as my bluetooth start to do the same. Can anyone help me? Thank you so much.
I don't have an answer for the AirPort problem but you might want to go to the Airport Community and post there. It appears to be an active group. good luck.
https://discussions.apple.com/community/wireless/airport?view=discussions -
I got my Dads old iPhone 3GS for Christmas and reset it to its factory settings. It had this problem with my Dad to, thats why he got a new phone. It was claiming that the battery was dead when I opened certain apps eventhough it had plenty of battery, It made me charge it and then said it was plenty charged. Why? That happened multiple times. That's what happened to my Dad as well. This however, is me only. O.K. so, the other day, it did it's battery dead shutdown thing, so I plugged it in, but it kept starting up, then shutting down again, starting up, and shutting down again. Now I've left it on the charger for about a days, it's not on the charger now, and it won't turn on. Help!!!!!!
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation and possible replacement. -
Computer turns off after start up
apple logo appears then computer shuts down why?
What model machine are you running?
Are you able to boot into Recovery System or Internet Recovery? If so, perform repair disk in Disk Utility. Your HDD may be failing. -
MMC hangs on Windows 2008 and SAP MMC console not coming up
Hi All,
We are running SAP CRM 7. After upgrading Windows 2003 to Windows 2008 R2, SAP is coming up on our J2ee engine. We are able to login to the SAP J2ee application, but SAP MMC hangs. After the reboot, SAP MMC does come up but it hangs while starting the SAP Server Processes. We have to close the MMC from CTRL-ALT-DEL (end process). After that SAP MMC does not come up. Although, we can number number of MMC.EXE running in task manager,but
the SAP MMC window is not displayed.
We have gone through OSS note Note 1326097 - SAP MMC Snap-In crash for certain operations and installed the new version of MMC. But still the error exists. Also, we have installed the VCREDLIST patch and have installed all the DLLs mentioned in OSS SS Note 684106 - Microsoft runtime DLLs.
Also, the event viewer shows the following message
Log Name: Application
Source: Application Hang
Date: 9/9/2011 8:32:30 AM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Computer: sap-xp-q01.com
Description:
The program mmc.exe version 6.1.7600.16385 stopped interacting with
Windows and was closed. To see if more information about the problem is
available, check the problem history in the Action Center control panel. Process ID: fcc
Start Time: 01cc6f03c402c248
Termination Time: 6
Application Path: C:\Windows\system32\mmc.exe
Report Id: e74f009f-daf8-11e0-afd2-000c29701b8a
Also, we have upgraded the SAP Kernel to the latest patch level and installed MMC latest patch.
Please suggest.
Thanks,
AntarpreetHello,
Try to re-create (re-register) the SAP Services (SAP instance services) in services.msc list. Then try to put SAP MMC up.
Or, after recreation of sap instance services, try to reconfigure the sap mmc as well -
http://help.sap.com/saphelp_nwpi71/helpdata/en/49/0eb43799b4740ee10000000a421937/content.htm
Thanks -
CCMSPING rz20 availability shows 100% - turns grey - satellite system down
Hello All
I have an issue in CCMSPING RZ20 availability reporting.
Even if the satellite system is down completely (3 app server + 1 CIDB), its availability reporting in RZ20 for CI instance shows 100% - turns grey after soem time still showing 100% - Value is obsolete after some time still showing 100% in grey.
My solution manager is on EHP1 SP04 (SPS20) recently upgraded from EHP1 SP02 (SPS18). Prior to upgrade it was working fine all the availability reporting used to show 0% when system is down. however after upgrade this weired behaviour started.
As it now showing 100% always no matter system is down completely, we are not able to trigger alerts in this case.
If anybody faced the same issue and found the solution to it, kindly assist.
Thanks
ShoebDear Shoeb Ali,
I am consient that your message is old! But I have the same issue on my system and I wondering if you had found a solution for this issue?
Many thanks for your help..
Regards,
Emmanuel Coindre.
[www.emmanuelcoindre.fr|http://www.emmanuelcoindre.fr] -
Shell replacement but touch functionality not available after start
Hi all,
i use Windows 7 Pro and I want to replace the Windows shell (eplorer.exe) with my own application.
For testing I changed all neccessary registry entries to notepad.exe (on board) as shell. After starting windows with autologon, notepad appears and no deskop and taskbar. Exactly what I expected. The problem is, the touchfunctionality is not available directly
after starting windows. No keyboard an mouse function. When I wait for 3 - 4 minutes without doing everything, the touch functionality is suddenly present.
When I change back to explorer shell, the touch funktionality is present directly after starting windows.
Does anybody know, how I can force the touch functionality, so that the touch work directly after starting windows with my own shell (Notepad)?
Further Information:
I use no third party driver and the touch display is connected via USB to simulate keyboard and mouse.
Thanks in advance.Hi,
To check the root cause of this issue, I suggest you follow these steps to create 2 boot trace file for comparison:
1. Start your computer in normal, and install WPT (http://social.technet.microsoft.com/wiki/contents/articles/4847.install-the-windows-performance-toolkit-wpt-en-us.aspx)
and run following command to trace boot sequence, it will let you restart your computer.
xbootmgr –trace boot -traceFlags BASE+LATENCY+DISK_IO_INIT+DISPATCHER+DRIVERS+FILE_IO+FILE_IO_INIT+NETWORKTRACE+PERF_COUNTER+POWER+PRIORITY+REGISTRY -postBootDelay 300 -resultPath C:\Boot_Trace_Normal
2. In normal mode, please do the changes to replace Windows shell, then run following command to capture the boot trace during restarting:
xbootmgr –trace boot -traceFlags BASE+LATENCY+DISK_IO_INIT+DISPATCHER+DRIVERS+FILE_IO+FILE_IO_INIT+NETWORKTRACE+PERF_COUNTER+POWER+PRIORITY+REGISTRY -postBootDelay 300 -resultPath C:\Boot_Trace_Replace
3. Check the difference by using Performance analyzer in WPT and referring following article:
WPA Detailed Walkthrough
http://msdn.microsoft.com/en-us/library/windows/hardware/hh448179.aspx
Also, you can upload the two log files into SkyDrive or similar network drive and share the public link for us to research.
Keep post.
Kate Li
TechNet Community Support -
Dispatcher stops after starting SAP and turning from green to grey
After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 27 14:47:21 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 3732
***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 27 14:47:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
Tue Mar 27 14:47:51 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 21528 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04BA0040, size: 2520320)
DpShMCreate: allocated sys_adm at 04BA0040
DpShMCreate: allocated wp_adm at 04BA17A8
DpShMCreate: allocated tm_adm_list at 04BA6BC0
DpShMCreate: allocated tm_adm at 04BA6BE8
DpShMCreate: allocated wp_ca_adm at 04DC4B30
DpShMCreate: allocated appc_ca_adm at 04DC9180
DpShMCreate: allocated comm_adm_list at 04DCA8F0
DpShMCreate: allocated comm_adm at 04DCA908
DpShMCreate: allocated vmc_adm_list at 04DF9708
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DF9730
DpShMCreate: allocated wall_adm at 04DF9738
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2264 blocks reserved for free list.
ES initialized.
Tue Mar 27 14:47:52 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 27 14:48:32 2007
ERROR => W0 (pid 5396) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1536) died [dpxxdisp.c 12187]
ERROR => W2 (pid 5404) died [dpxxdisp.c 12187]
ERROR => W3 (pid 1520) died [dpxxdisp.c 12187]
ERROR => W4 (pid 4208) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3584) died [dpxxdisp.c 12187]
ERROR => W6 (pid 4512) died [dpxxdisp.c 12187]
ERROR => W7 (pid 5484) died [dpxxdisp.c 12187]
ERROR => W8 (pid 5488) died [dpxxdisp.c 12187]
ERROR => W9 (pid 5500) died [dpxxdisp.c 12187]
ERROR => W10 (pid 888) died [dpxxdisp.c 12187]
ERROR => W11 (pid 5512) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W12 (pid 5520) died [dpxxdisp.c 12187]
ERROR => W13 (pid 5528) died [dpxxdisp.c 12187]
ERROR => W14 (pid 5532) died [dpxxdisp.c 12187]
ERROR => W15 (pid 5536) died [dpxxdisp.c 12187]
ERROR => W16 (pid 5468) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W17 (pid 5564) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W18 (pid 1676) died [dpxxdisp.c 12187]
ERROR => W19 (pid 5652) died [dpxxdisp.c 12187]
ERROR => W20 (pid 4704) died [dpxxdisp.c 12187]
ERROR => W21 (pid 1796) died [dpxxdisp.c 12187]
ERROR => W22 (pid 5568) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W23 (pid 6084) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W24 (pid 5704) died [dpxxdisp.c 12187]
ERROR => W25 (pid 3580) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5396 (SIGUSR2)
ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-5404 (SIGUSR2)
ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1520 (SIGUSR2)
ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3584 (SIGUSR2)
ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-5484 (SIGUSR2)
ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-5488 (SIGUSR2)
ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-5500 (SIGUSR2)
ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-888 (SIGUSR2)
ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-5512 (SIGUSR2)
ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-5520 (SIGUSR2)
ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-5528 (SIGUSR2)
ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-5532 (SIGUSR2)
ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-5536 (SIGUSR2)
ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-5468 (SIGUSR2)
ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-5564 (SIGUSR2)
ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-1676 (SIGUSR2)
ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-5652 (SIGUSR2)
ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c 2468]
killing W20-4704 (SIGUSR2)
ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c 2468]
killing W21-1796 (SIGUSR2)
ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c 2468]
killing W22-5568 (SIGUSR2)
ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c 2468]
killing W23-6084 (SIGUSR2)
ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c 2468]
killing W24-5704 (SIGUSR2)
ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c 2468]
killing W25-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:42 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 27 13:48:42 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action
Table
0 DIA 5396 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 5404 Ended no 1 0 0
3 DIA 1520 Ended no 1 0 0
4 DIA 4208 Ended no 1 0 0
5 DIA 3584 Ended no 1 0 0
6 DIA 4512 Ended no 1 0 0
7 DIA 5484 Ended no 1 0 0
8 DIA 5488 Ended no 1 0 0
9 DIA 5500 Ended no 1 0 0
10 DIA 888 Ended no 1 0 0
11 DIA 5512 Ended no 1 0 0
12 UPD 5520 Ended no 1 0 0
13 UPD 5528 Ended no 1 0 0
14 UPD 5532 Ended no 1 0 0
15 UPD 5536 Ended no 1 0 0
16 UPD 5468 Ended no 1 0 0
17 ENQ 5564 Ended no 1 0 0
18 BTC 1676 Ended no 1 0 0
19 BTC 5652 Ended no 1 0 0
20 BTC 4704 Ended no 1 0 0
21 BTC 1796 Ended no 1 0 0
22 BTC 5568 Ended no 1 0 0
23 SPO 6084 Ended no 1 0 0
24 UP2 5704 Ended no 1 0 0
25 UP2 3580 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 27 13:48:42 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 27 13:48:42 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T26, U27, , SAPPRD, 14:48:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Mar 27 13:48:42 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:47 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1844) (SOFT_KILL)
Stop icman
killing process (5376) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 26
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
return errno (-17) to T26
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T26 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1216
dp_tm_adm[26].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1175003332
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 26
DpListInsert: insert elem 26 into tmadm_free_list (at begin)
DpListInsert: 175 elems in tmadm_free_list
DpListRemove: remove elem 26 from tmadm_inuse_list
DpListRemove: 26 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1844 HANDLE:1500)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1844 HANDLE:1500)
[DpProcDied] Process died (PID:5376 HANDLE:1492)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SAPPRD'
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1504
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c 8495]
Good Bye .....what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck, -
Jcontrol.exe not starting after creating ssl certificate
hi,
Iu00B4ve got a netweaver AS Java (only) 640 SP19. I tried to create a SSL certificate (Test) with visual admin and after importing "getCert" i wanted to restart the SAP-System. The problem is that jcontrol.exe has not been started and stayed grey (status: stopped).
Hereu00B4s a part of the dev-trace:
[Thr 3796] Thu Nov 20 16:17:36 2008
[Thr 3796] *** ERROR => invalid return code of process [bootstrap_ID103537200] (exitcode=-2) [jstartxx.c 1465]
[Thr 3796] JControlExecuteBootstrap: error executing bootstrap node [bootstrap_ID103537200] (rc=-2)
[Thr 3796] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID103537250]
[Thr 3796] INFO: Unknown property [JLaunchParameters=]
[Thr 3796] [Node: server0 bootstrap] java home is set by profile parameter
Java Home: D:\apps\j2sdk1.4.2_17-x64
dev_bootstrap:
trc file: "D:\usr\sap\CCM\JC10\work\dev_bootstrap", trc level: 1, release: "640"
node name : bootstrap
pid : 1992
system name : CCM
system nr. : 10
started at : Thu Nov 20 16:17:32 2008
arguments :
arg[00] : D:\usr\sap\CCM\JC10/j2ee/os_libs/jlaunch.exe
arg[01] : pf=D:\usr\sap\CCM\SYS\profile\CCM_JC10_iswdmz5
arg[02] : -DSAPINFO=CCM_10_bootstrap
arg[03] : pf=D:\usr\sap\CCM\SYS\profile\CCM_JC10_iswdmz5
[Thr 3736] Thu Nov 20 16:17:32 2008
[Thr 3736] INFO: Unknown property [box.number=CCMJC10iswdmz5]
[Thr 3736] INFO: Unknown property [ms.host=iswdmz5]
[Thr 3736] INFO: Unknown property [ms.port=3611]
[Thr 3736] INFO: Unknown property [system.id=10]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties]
-> ms host : iswdmz5
-> ms port : 3611
-> OS libs : D:\usr\sap\CCM\JC10\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
Instance properties
-> ms host : iswdmz5
-> ms port : 3611
-> os libs : D:\usr\sap\CCM\JC10\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
-> [01] bootstrap_ID10353720 : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
-> [02] bootstrap_ID10353725 : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID103537200 : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
-> [01] ID103537250 : D:\usr\sap\CCM\JC10\j2ee\cluster\instance.properties
[Thr 3736] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 3736] JLaunchRequestQueueInit: create pipe listener thread
[Thr 3564] JLaunchRequestFunc: Thread 3564 started as listener thread for np messages.
[Thr 3732] WaitSyncSemThread: Thread 3732 started as semaphore monitor thread.
[Thr 3736] NiInit2: NI already initialized; param 'maxHandles' ignored
[Thr 3736] [Node: bootstrap] java home is set by profile parameter
Java Home: D:\apps\j2sdk1.4.2_17-x64
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : D:\apps\j2sdk1.4.2_17-x64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : 1.4.2_17-b06
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 128M
-> root path : D:\usr\sap\CCM\JC10\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : D:\usr\sap\CCM\JC10\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\CCM\JC10\j2ee\os_libs\jstartup.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID1035372
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout: 120000
[Thr 3704] JLaunchIStartFunc: Thread 3704 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
-> stack : 2097152 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Denv.class.path=d:\apps\SAPJCo\sapjco.jar
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -Djco.jarm=1
-> arg[ 5]: -Dsys.global.dir=D:\usr\sap\CCM\SYS\global
-> arg[ 6]: -Dapplication.home=D:\usr\sap\CCM\JC10\j2ee\os_libs
-> arg[ 7]: -Djava.class.path=D:\usr\sap\CCM\JC10\j2ee\os_libs\jstartup.jar;.\bootstrap\launcher.jar
-> arg[ 8]: -Djava.library.path=D:\apps\j2sdk1.4.2_17-x64\jre\bin\server;D:\apps\j2sdk1.4.2_17-x64\jre\bin;D:\apps\j2sdk1.4.2_17-x64\bin;D:\usr\sap\CCM\JC10\j2ee\os_libs;D:\usr\sap\Python\.;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;D:\apps\SAPJCo;D:\apps\j2sdk1.4.2_17-x64\bin;D:\usr\sap\CCM\JC10\exe;D:\usr\sap\CCM\SYS\exe\run
-> arg[ 9]: -Dmemory.manager=128M
-> arg[ 10]: -Xmx128M
-> arg[ 11]: -DLoadBalanceRestricted=no
-> arg[ 12]: -Djstartup.mode=BOOTSTRAP
-> arg[ 13]: -Djstartup.ownProcessId=1992
-> arg[ 14]: -Djstartup.ownHardwareId=D2128917885
-> arg[ 15]: -Djstartup.whoami=bootstrap
-> arg[ 16]: -Djstartup.debuggable=yes
-> arg[ 17]: -DSAPINFO=CCM_10_bootstrap
-> arg[ 18]: -DSAPSTARTUP=1
-> arg[ 19]: -DSAPSYSTEM=10
-> arg[ 20]: -DSAPSYSTEMNAME=CCM
-> arg[ 21]: -DSAPMYNAME=iswdmz5_CCM_10
-> arg[ 22]: -DSAPDBHOST=
-> arg[ 23]: -Dj2ee.dbhost=iswdmz5
[Thr 3704] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [bootstrap]
-> arg[ 0]: com.sap.engine.bootstrap.Bootstrap
-> arg[ 1]: ./bootstrap
-> arg[ 2]: ID1035372
[Thr 3708] Thu Nov 20 16:17:34 2008
[Thr 3708] JLaunchIExitJava: exit hook is called (rc=0)
[Thr 3708] JLaunchCloseProgram: good bye (exitcode=0)
and the jvm_bootstrap.out:
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID1035372].
Missing RunningMode property - runningin NORMAL mode.
Instance [ID1035372] will run in [NORMAL] mode, performing action [NONE]
Discovered property [instance.en.port] with value [3211] !
Discovered property [instance.en.host] with value [iswdmz5] !
Synchronizing file [.\.hotspot_compiler].
...Synched ok!
Synchronizing file [..\..\SDM\program\.hotspot_compiler].
...Synched ok!
Synch time: 922 ms
I hope this is enough information. Before importing the certificate from the SAP Support Portal the AS Java runned perfectly.
regards
Tobias NagelAdditional information:
When I deactivate SSL by switching from automatic starting to manual starting in the configtool the jcontrol.exe process starts without any errors. -
Sap disp+work .exe stopped in mmc
Hello Experts ,
sap disp+work .exe stopped .... please help me how to solve this issue....
sap netweaver 7.0 /oracle 10g/win 2003 32 bit
i will provide dev_disp log
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid SAG
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 3312
Thu Apr 03 10:28:49 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3312) [dpxxdisp.c 1237]
Thu Apr 03 10:28:50 2014
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Apr 03 10:28:55 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >jagadesh_SAG_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 08160040, size: 4653368)
DpShMCreate: allocated sys_adm at 08160040
DpShMCreate: allocated wp_adm at 08161E40
DpShMCreate: allocated tm_adm_list at 081665C0
DpShMCreate: allocated tm_adm at 081665F0
DpShMCreate: allocated wp_ca_adm at 08535890
DpShMCreate: allocated appc_ca_adm at 0853B650
DpShMCreate: allocated comm_adm at 0853D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 085BE450
DpShMCreate: allocated gw_adm at 085BE490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 085BE4C0
DpShMCreate: allocated wall_adm at 085BE4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Apr 03 10:28:56 2014
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 4484
argv[0] = D:\usr\sap\SAG\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\SAG\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\SAG\SYS\profile\SAG_DVEBMGS00_jagadesh
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1433
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SAG
argv[7] = -DSAPMYNAME=jagadesh_SAG_00
argv[8] = -DSAPPROFILE=D:\usr\sap\SAG\SYS\profile\SAG_DVEBMGS00_jagadesh
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
Thu Apr 03 10:28:57 2014
***LOG Q0K=> DpMsAttach, mscon ( jagadesh) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >jagadesh_SAG_00 <)
DpStartStopMsg: start msg sent
Thu Apr 03 10:29:00 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Apr 03 10:29:03 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Apr 03 10:29:39 2014
*** ERROR => W0 (pid 4500) died [dpxxdisp.c 14241]
*** ERROR => W1 (pid 4508) died [dpxxdisp.c 14241]
*** ERROR => W2 (pid 4516) died [dpxxdisp.c 14241]
*** ERROR => W3 (pid 4524) died [dpxxdisp.c 14241]
*** ERROR => W4 (pid 4532) died [dpxxdisp.c 14241]
*** ERROR => W5 (pid 4540) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 4548) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 4560) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 4568) died [dpxxdisp.c 14241]
*** ERROR => W9 (pid 4588) died [dpxxdisp.c 14241]
*** ERROR => W10 (pid 4596) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 4604) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 4620) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:49 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Apr 03 04:59:49 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4500 Ended no 1 0 0
1 DIA 4508 Ended no 1 0 0
2 DIA 4516 Ended no 1 0 0
3 DIA 4524 Ended no 1 0 0
4 DIA 4532 Ended no 1 0 0
5 DIA 4540 Ended no 1 0 0
6 UPD 4548 Ended no 1 0 0
7 ENQ 4560 Ended no 1 0 0
8 BTC 4568 Ended no 1 0 0
9 BTC 4588 Ended no 1 0 0
10 BTC 4596 Ended no 1 0 0
11 SPO 4604 Ended no 1 0 0
12 UP2 4620 Ended no 1 0 0
Dispatcher Queue Statistics Thu Apr 03 04:59:49 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 5 ( 62%), shm 3 ( 37%)
since last update total 8, udp 5 ( 62%), shm 3 ( 37%)
Dump of tm_adm structure: Thu Apr 03 04:59:49 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Apr 03 04:59:49 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:54 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >jagadesh_SAG_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4484)
killing process (4484) (SOFT_KILL)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1432 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1432 (pos=2)
SiSelNRemove: removed sock 1432
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1432
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4468) (SOFT_KILL)
Stop icman
killing process (4476) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4468 HANDLE:1528)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:55 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4468 HANDLE:1528)
wait for end of icman
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:56 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:57 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:58 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:59 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:00 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:01 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:02 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:03 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:04 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:05 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:06 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4476 HANDLE:1532)
[DpProcDied] Process died (PID:4484 HANDLE:1512)
DpStartStopMsg: send stop message (myname is >jagadesh_SAG_00 <)
NiIMyHostName: hostname = 'jagadesh'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Apr 03 10:30:07 2014
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1456 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1456 (pos=3)
SiSelNRemove: removed sock 1456
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1456
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3312) [dpxxdisp.c 10259]
Good Bye .....
Regards
jagadesh varmaHi
Gaurav rana,
Thank u for quick reply rana,,,
i will provide host file
opyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.1.1 jagadesh
regards
sagi -
J2E instance not up/jcontrol.exe stopped after DB password changes
Hi,
i have changed my MAXDB user(SAPJ2EDB) password in config tool in secure store node (parameter: jdbc/pool/J2E/Password). After the password changes, when i re-started the server, my J2E instance is not started running. The jcontrol.exe file is stopped with the following trace log
trace file log
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC02/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC02_us21217509
-> arg[02] = -DSAPINFO=J2E_02_bootstrap
-> arg[03] = -file=C:\usr\sap\J2E\JC02\j2ee\cluster\instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_3124
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC02\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC02\work\std_bootstrap.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC02\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC02_us21217509
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Schlumberger\Smart Cards and Terminals\Cyberflex Access Kits\v4\;C:\Program Files\Executive Software\Diskeeper\;C:\usr\sap\J2E\SCS03\exe;C:\usr\sap\J2E\JC02\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC02\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Schlumberger\Smart Cards and Terminals\Cyberflex Access Kits\v4\;C:\Program Files\Executive Software\Diskeeper\;C:\usr\sap\J2E\SCS03\exe;C:\usr\sap\J2E\JC02\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 1708] Wed Jan 17 18:33:59 2007
[Thr 1708] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx.c 1452]
[Thr 1708] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 1708] JControlCloseProgram: started (exitcode = 66)
[Thr 1708] JControlCloseProgram: good bye... (exitcode=66)
Bootstrp file log below
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID0256613].
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:360)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:147)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:66)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.dbtech.jdbc.exceptions.DatabaseException: [-4008]: Unknown user name/password combination
at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:72)
at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:852)
at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:511)
at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:375)
at com.sap.dbtech.jdbc.ConnectionSapDB.doConnect(ConnectionSapDB.java:313)
at com.sap.dbtech.jdbc.ConnectionSapDB.<init>(ConnectionSapDB.java:108)
at com.sap.dbtech.jdbc.DriverSapDB.connect(DriverSapDB.java:189)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:219)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:577)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:263)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
... 14 more
[Bootstrap module]> Problem occured while performing synchronization.
From the system log, i noticed ,
log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#-4008#08004#[-4008]: Unknown user name/password combination#jdbc:sapdb://us21217509/J2E?timeout=0&spaceoption=true&unicode=true#<null>#
because of the changes done by me in config tool, the username / password combination is not considered by the system properly i think. Anyways not sure what went on wrong ?
Any idea ?
RajaIf so , then how do i do it at database level .
Also today i noticed the simillar problem in SDN.but solution is not provided there
Changed password of SAPJ2EDB user, cannot start WAS 6.40 anymore
When i search sap.dom fo the same ( as per the above thread says ) , i could see few relevant documents(http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/14c93ec2f7df6ae10000000a114084/frameset.htm ) , but not able to follow the instructions. because i couldnt able to open the visual admin to create new user or group .
Any one have any idea ?
Thanks
Raja S
Maybe you are looking for
-
On cRIO-9033, property node: Owning VI Reference is Invalid
I am starring for the first time to work with a UI on cRIO-9033. The code I am trying to adapt to work on the RT is working on Windows just fine. But when I put it on the RT it throws errors. I looked through the code and I kept getting error 1026 Re
-
Information needed for the XMLInterface
Hi, In the past, I used XSU to extract and insert/update data from/into the database in XML documents. In BC4J, there is now this XMLInterface, for example implemented by the ViewObject object. This looks better, because the writeXML method automagic
-
OID install using High availabilty option.
Hi, I am trying to install OIM 10.1.4 on Linux. I have not been able to follow the steps as specified in metalink doc id 359715.1. Here is what I get: 1) I cannot get a new cluster name screen as shown step 11. I only get specify existing cluster nam
-
How to make this example output in using Excel table ?
for example : <?php $con = oci_connect("apps","apps","prod"); $sql = " select h.order_number,to_char(h.ordered_date,'YYYY/MM/DD HH24:MI'),h.order_type_id from oe_order_headers_all h where to_char(h.ordered_date,'YYYYMMDD') = '20060620' and h.org_id =
-
Production Down Time costs.
Hi all, 1.How to record Production order down time when a workcenter is down. The reason for this is to find out how much time the production order is delayed because of machinary problem. does that cost should go to Production Order or to Cost Cen