JCOP Tools 3.1.1.b and other Cards

Hello
At the moment I'am working at my degree dissertation. A little part of this dissertation is to write a cardlet on a javacard.
I have got the JCOP Tools 3.1.1.b for Eclipse, but JavaCards of other producers: Safenet Model 330J, GemSafeXpresso 32 k and cyberflex Access e-gate 32K(Schlumberger / Axalto).
At the moment i don't know how to bring my java card applet on the card.
In the JCOP Tools i can only choose the preconfigured Type "JCOP Engeneering Sample". Is there a way to become more preconfigured card types? Or anyone knows the custom type settings for any of the cards?

I am on a similiar assignment in my office and not an expert but after a couple of weeks of research i have found a few things.
1. Its better to get JCOP20,JCOP30 or JCOP41 cards for compatibility reason and avoiding over work
2. Buy a PC/SC compliant Smart Card Reader for compatibility reasons.
i have already ordered these.
Secondly check this link for loader application, code is fine but cap file version was the issue.
http://forum.java.sun.com/thread.jspa?forumID=23&threadID=702955
i havnot got the real cards but i believe that JCOP tools will be able to uplaod the application on it without the need of above code. As running simulations we have option of Install in the ide.
Any ways some expert guy on the forum will answer you shortly -:)
Bilal

Similar Messages

Debugger tool doesn't include SIPStack and other mediation related components

Hello,
I have noticed everytime now that when I install CU 8 on Lync 2013 and then install Debugger tool I don't get SIPStack and any other related mediation component listed. I tried troubleshooting and replacing the default file but it's not coming up although
the Lync mediation service is started and nothing is wrong with the server.
I'm just trying to trace calls but I can't figure out why is this happening? it's not the first deployment that I have noticed this.
I would appreciate any suggestion on this.
Thanks
Mohammed JH

Hi,
In my Lync Server 2013 environment, I have update to the latest CU. however, in the Lync Server Debugger Tool, I can see the SIPStack and other related Mediation Server component listed as following:
Please make sure you have update to the latest version of Lync Server 2013 and then check the issue again.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Instructions for Downloading and Activating the JCOP Tools

In response to my question:
I refer to JCOP Tools available on Eclipse.
If the plug-in free for download?
If it is not, kindly provide a proper hyperlink from which those interested can place their order.Listed below is the reply from IBM. Can anyone who has successfully obtained the activation code this way confirm whether you need to foot the postage?
Cheers!!!!
There is no charge for the JCOP Tools. The tools are provided as-is with no warranty or support. Instructions for downloading and activating the tools follow.
Please note that because our Java Card operating system is now available for more than one silicon vendor, IBM will no longer act as a distributor for sample cards. If you require a sample card, you must now approach the silicon vendors directly . Our current silicon partners are Philips Semiconductor, Samsung and Sharp. In addition you may be able to obtain JCOP sample cards from suppliers on this list http://www.zurich.ibm.com/jcop/order/cards.html
JCOP Tools are subject to US Government Export Controls, and therefore each install has to be activated individually to ensure compliance. Please follow the instructions below for each copy of the tools that need to be activated.
Prerequisites:
   1. If you do not already have a Java Runtime Environment (JRE) installed, download and install a JRE or JDK. You can do so from this website (http://java.sun.com/j2se/1.4.2/download.html). Please note that we recommend the use of JRE version 1.4.2.
   2. If you do not already have the open source software development environment Eclipse installed, download and install Eclipse (http://www.eclipse.org/), You can do so from this website(http://www.eclipse.org/downloads/index.php). JCOP Tools require Eclipse 3.1
To download the tools and start install:
   1. Download the current Update Site image from here (http://www.zurich.ibm.com/jcop/download/eclipse/image/tools.zip)
   2. Unzip the downloaded file to a location of your choice
   3. Start the Eclipse IDE
   4. From the menu bar click on Help > Software Updates > Find and Install
   5. In the Install/Update Dialog select Search for new features to install
   6. Click Next
   7. Click on New Archived Site . . . and browse to the location chosen in step 2
   8. Select the file tools.zip
   9. Click Open then OK then Finish
10. Eclipse Update Manager will start to install the plug-in, continue with the install as needed.
For an activation code please send me ([email protected]) the following information:
   1. Your full postal address - the serial number will be sent via International Courier for US Export control reasons.
   2. Your contact telephone number
   3. The serial number of your JCOP tools install
   4. Your planned usage/reason for needing the JCOP tools
   5. If a student, a copy (fax or digital photo) of your student ID
For the serial number (item 3 above):
   1. Ensure you have downloaded and installed the JCOP Tools
   2. Start the Eclipse IDE
   3. From the menu bar click on File > New > Project
   4. In the New Project Dialog expand the Java Card folder
   5. Select Java Card Project
   6. Click Next
   7. You should now see the JCOP Licensing Wizard
   8. Click Next
   9. Select Verify an Activation Code
10. Click Next
11. The Serial Number should appear on the next page, above the Activation Code entry fields.
12. Once you have that number click on Cancel then Abort (Note: the Java Card project choice will be disabled until the next time you restart Eclipse)

For those who are interested to use the JCOP simulator for a start, I have checked that the plug-in and feature files (in tools.zip) for Eclipse are still available at IBM site, please download and install yourself.
I still keep a copy of user guide for JCOP tools (version 3.1.1a) and the contents are still relevant to Version 3.1.1b simulator in tools.zip.
If you are interested to have a copy of such document, kindly drop me an email to [email protected]

Where can I download JCOP tools and activate it

as I have learned that :As of July 1st 2007, all support activities for the JCOP operating system on NXP/Philips silicon will be serviced by NXP Semiconductors.
Please email requests for the JCOP Tools to: [email protected]
It means that I have to request the JCOP Tools from the above mail and have no any other means?
can you tell me other way to get the JCOP Tools, thank you very much!

A guy from NXP explained to me that they need to follow export control regulations strictly as it is basically an U.S. product. The second thing is that most JCOP products are Common Criteria certified and this requires that also the simulation included in JCOP is handled under NDA. To remove JCOP Tools from all this constraints would mean that all crypto functionality is minimized to the same level as in Sun's Java Card development kit (tools + simulation).
Maybe IBM had a smarter way of deailing with this or had a special deal with the U.S. customs, don't know.

JCOP tools on 64-bit platform

Hello.
Is there any way to find jct.dll, jcpcsc.dll (those are in the jcop plug-in os/ directory) analogues for 64-bit platform?
As i know, jcop tools provides only dll's and so libraries for 32-bit platforms to communicate with the card? Are there any 64-bit compatible?
I want to use Offcard API from JCOP tools on 64-bit platform (it uses mentioned above dlls or shared objects on Linux).
Best regards,
eveline-z

eveline-z wrote:
Thanks for your reply.
So, Eclipse IDE with JCOP plug-in work fine on 64-bit platform without any emulation?Yes
I mean, you had no problems with connecting to a real card through the JCShell or even using JCOP Offcard API (because those are using native dll's for 32-bit platform which reside in com.ibm.bluez.jcop.eclipse_3.1.2\os\win32\x86\ directory)?I tested only on the simulator
The "com.ibm.bluez.jcop.eclipse_3.1.2\os\win32\x86\" directory is in the folder plugins in your eclipse path.
example : c:\eclipse\plugins\com.ibm.bluez.jcop.eclipse_3.1.2\os\win32\x86\
>
>
Thanks.
Best regards,
eveline-zMaDmEd

FYI: IBM has quit the JCOP Tools!

Hi,
I just checked the JCOP-Tools news site for new versions and found the following notice:
The JCOP project comes to a close in our lab.The whole team working on JCOP in Zurich says goodbye and thanks all the users of our tools and on-card software.
Please note that no orders for JCOP cards and activation codes can be placed on this website after January 31, 2006.
See it yourself: http://www.zurich.ibm.com/jcop/news/news.html
My suggestion for all developer who are using the JCOP-tools:
Make yourself a backup of the JCOP plugin so you will be able to install it even if the online installation repository isn't available anymore.
At least download the current plugin-file:
http://www.zurich.ibm.com/jcop/download/eclipse/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.b.jar
Additionally you can download the site and feature file, too:
http://www.zurich.ibm.com/jcop/download/eclipse/site.xml
http://www.zurich.ibm.com/jcop/download/eclipse/features/com.ibm.bluez.jcop.eclipse_3.1.1.b.jar
This allows you do perform an offline installation of the JCOP tools in case you have to clean up your eclipse.
For installation you can extract this jar into a new subdirectory (named "com.ibm.bluez.jcop.eclipse_3.1.1.b") of the eclipse "plugin" directory.
BTW: They are explicitly referring to this forum for "questions and answers for using JCOP".
Perhaps that means some of the formerly JCOP members will participate in this forum? - We will see...
Jan

Can anybody provide details of how JCOP tools can now
be aquired?Obvious answer: contact IBM. There is a link on the old Zurich pages. I know that they still work on JCOP, but I presume they have changed the conditions on acquiring the JCOP tools, since they have matured and have left Zurich. IBM is used to doing this; see Aphaworks. If their products get to a certain stage, they become (part of) a commercial product. I don't think they still provide sample cards etc. Read their page to be sure.

Using JCOP tools under Linux

Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbie

newbie2007 wrote:Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbieEverything should work, except for the target pack and the non-existent Linux Pegoda driver.1. The is no seperate Linux distribution. You just need a Linux distribution for Eclipse.JCOP Tools plugin should work under Linux, except for the target pack and the non-existent Pegoda driver for Linux.1. There is no seperate Linux distribution. You just need the Linux distribution for Eclipse.
2. Prior to JCOP Tools 3.1.2 the last time something was mentioned about Linux was in the release notes of 3.1.1b . In version 3.2.0 IBM added a linux_support page to the JCOP Tools user guide (see release notes and linux_support page below).
3. There shouldn't be any problems with the generic simulation. The target pack runs only with Windows though.
h1. Release Notes
h2. Version
JCOP Tools 3.1.1.b (Bärlach)
h2. What's new?
h3. 3.1.1.b
<ul><li>New simulation (fixed static obj/arr bug, fixed instance field token bug).</li>
<li>Applet privileges can now be specified in the launch configuration dialog.</li>
<li>The "exportmap" feature is now available.</li>
<li>The JCOP Performance Test Demo ("JCOP Factor") is now included.</li>
<li>Minor bug fixes.</li>
</ul>
h2. Known problems
<ul><li>Simulations do not run (Linux, MacOS X)
     The Eclipse update manager does not set the execute permission bits for the simulations. You need to manually <code>chmod 755</code> those files in ECLIPSE/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.x/simuls/
</li>
<li>PC/SC Support (Linux)
     JCOP Tools only works with pcsc-lite 1.2.0.
</li>
</ul>
h2. Frequently Asked Questions
Please refer to the online FAQ at http://www.zurich.ibm.com/jcop/download/eclipse/faq/.
h2. Bug Reports
Please send bug reports to [email protected]. Make sure you include the following:
<ul><li>Problem description</li>
<li>Steps to reproduce</li>
<li>Eclipse version and build number (Help > About)</li>
<li>JCOP Tools version (Help > About; click on BlueZ icon)</li>
</ul>
h2. Using JCOP Tools with Linux (>= 3.2.0)
h3. ___
Overview
The current JCOP Tools release now also offer a version for the popular Linux
operating system. Both the Windows and Linux verson provide more or less the same
functionality, and JCOP application development can thus fully succeed on Linux systems.
Nevertheless, installation of the JCOP Tools differ between Windows and Linux
where the Linux version does not provide a simple installer as in case of Windows.
Additionally, the Linux version expects a properly setup Muscle PCSC installation
as soon as you want to use them together with physical, real cards. As Muscle
PCSC is still not shipped with most Linux distributions, you must download and
install them separately from the JCOP Tools.
h3. ___
Contents
h3. ___
Software Requirements
Linux distribution
The JCOP Tools simulation has been developed on a Fedora Core 6 system, but should also work in case of
many other recent Linux distributions.
Java Development Kit
The JCOP Tools have been developed and tested with the Sun JDK 1.4.2_13-b06
for Linux. Your success with other Development Kits may vary as there are
partly subtle differences across the different devlopment kits.
PCSC
The JCOP Tools use PCSC to talk with real cards on Linux. Most distributions
do not ship with Linux PCSC by default (Fedora Core 6 does), you must thus download it fromhttp://www.linuxnet.com
and install it by yourself. If you are used to software installation under Linux,
and are not afraid of compiling and installing software packages, this should
not be a hard problem. You have to download both the base PCSC package
(including PCSC daemon and client libraries) and separately the driver
for the reader you want to use. The PCSC package contains a test program
which should tell you whether your installation is set up correctly and
communicating with a card works. The JCOP Tools have been reported to
work together with Muscle PCSC version 1.3.1-7.
JPCSC
The JCOP Tools are shipped with JPCSC which you can also download athttp://www.linuxnet.com. JPCSC
is a JNI library which offers Java applications the access to PC/SC functions
by mapping their requests to an underlying native PC/SC implementation. The JCOP
Tools - mostly written in Java - thus depend on JPCSC to communicate with real cards
on Linux. JPCSC depends on a properly installed and setup PC/SC environment.
Especially, the JAVA_LIBRARY_PATH should list the directories where the
PC/SC client libraries and the native JPCSC library libjpcsc.so ( downloadable as binary from
Windows Binary Download Here )
are installed, the CLASSPATH variable should list th___
Miscellaneous
What should work
As soon as you setup your system correctly, there should only be minor differences
between using JCOP Tools on Windows or on Linux. Emulating a real JCOP,
debugging, shell, cap-file conersion should all be possible as in case of Windows.
What is missing
No drivers or tools are currently available for using JCOP30's in contactless
mode. If you need such support, please contact directly NXP
at for further assistance.
Copyright 2001,2007 IBM Corp. All rights reserved.
Edited by: lexdabear on Sep 28, 2007 4:13 PM (I hate the new edit)

JCOP tools plugin is unable to upload the applet

Greetings.
I have installed Eclipse 3.3 and JCOP tools (activated). We got ready Java Card applet and my task is to upload it into the Java Card. Firstly I want test it on a simulator.
The applet compiled successfully and the .CAP file is created. But when upload -d "blah blah blah .cap" command is executed either by me or by jcshell, it returns immediately and I don't actually see any data transmitted to the card (in this case simulator). After the card-info command is executed I see this:
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Load File : LOADED (--------) A0000000035350 (Security Domain)
Module : A000000003535041
Load File : LOADED (--------) 01020304054F5449
Module : 0102030405
The last file has AID of my applet. But I know it is not there (on the card). When I run install command it does not return. I get nothing. JCOP tools seems to be busy and working but no response... neither error code nor exception.
I'm stuck with this issue three days already. Could anybody help me?
Thank you in advance.
Best regards, Greg
Software engineer at OTI
Edited by: neutrino on Oct 31, 2007 6:01 AM

Hi.
It is advised to install Eclipse 3.1.2, jdk 1.4.2 for JCOP tools plug-in 3.1.1.b/3.1.2.
Also, regarding the usage of JCOP shell, write:
/mode trace=on
before uploading of your cap file to trace all the APDUs.
Best regards,
Eve
Edited by: Ieva on Oct 31, 2007 6:38 AM

JCOP tools and walllet example

Hi,
I'm trying to execute the well known (not for me ;-)) Wallet example with JCOP tools 3.1.1 but I have some problems.
The first is related to install parameters: searching into other threads I was able to install the applet using 0102030405 parameter (even if it's not clear for me the meaning of this parameter, the install method accepts 3 parameters, bArray, bOffset and bLength).
Here the install APDU trace:
cm> install -i 77616c6c65742e617070 -q C9#(0102030405) 6578616d706c6573 77616c6c65742e617070
=> 80 E6 0C 00 2A 08 65 78 61 6D 70 6C 65 73 0A 77 ....*.examples.w
61 6C 6C 65 74 2E 61 70 70 0A 77 61 6C 6C 65 74 allet.app.wallet
2E 61 70 70 01 00 07 C9 05 01 02 03 04 05 00 00 .app............
(2002 usec)
<= 90 00 ..
Status: No Error
cm> card-info
=> 80 F2 80 00 02 4F 00 00 .....O..
(471848 nsec)
<= 08 A0 00 00 00 03 00 00 00 01 9E 90 00 .............
Status: No Error
=> 80 F2 40 00 02 4F 00 00 [email protected]..
(521854 nsec)
<= 0A 77 61 6C 6C 65 74 2E 61 70 70 07 00 90 00 .wallet.app....
Status: No Error
=> 80 F2 10 00 02 4F 00 00 .....O..
(762666 nsec)
<= 07 A0 00 00 00 03 53 50 01 00 01 08 A0 00 00 00 ......SP........
03 53 50 41 08 65 78 61 6D 70 6C 65 73 01 00 01 .SPA.examples...
0A 77 61 6C 6C 65 74 2E 61 70 70 90 00 .wallet.app..
Status: No Error
Card Manager AID : A000000003000000
Card Manager state : OP_READY
Application: SELECTABLE (--------) "wallet.app"
Load File : LOADED (--------) A0000000035350 (Security Domain)
Module : A000000003535041
Load File : LOADED (--------) "examples"
Module : "wallet.app"
After that I'm not able to select the applet, here the APDU trace:
cm> /select |wallet.app
=> 00 A4 04 00 0A 77 61 6C 6C 65 74 2E 61 70 70 00 .....wallet.app.
(334400 nsec)
<= 6E 00 n.
Status: CLA value not supported
jcshell: Error code: 6e00 (CLA value not supported)
jcshell: Wrong response APDU: 6E00
Any help would be very appreciated.
Dariush.

Dariush, whether this pin data or not is defined inside an applet. As for Wallet it must be pin value. But I saw several implementations of Wallet applet with different initialize parameters processing.
Consider this code:
   private Wallet(byte[] bArray, short bOffset, byte bLength) {
      pin = new OwnerPIN(PIN_TRY_LIMIT, MAX_PIN_SIZE);
      byte iLen = bArray[bOffset]; // aid length
      bOffset = (short) (bOffset + iLen + 1);
      byte cLen = bArray[bOffset]; // info length
      bOffset = (short) (bOffset + cLen + 1);
      byte aLen = bArray[bOffset]; // applet data length
      pin.update(bArray, (short) (bOffset + 1), aLen);
      register();
   public static void install(byte[] bArray, short bOffset, byte bLength) {
      new Wallet(bArray, bOffset, bLength);
   }Think of bArray data array as installation parameters (like command-line params in main method of the Java application); some of them you defined using C9 tag in JCOP Shell. Look at the comments in Wallet constructor and you will understand what data is passed. aLen variable denotes the length of parameters you passed through C9 tag.
You can make a breakpoint on the first line in the constructor and then inspect what bArray actually contains.
bOffset - is the offset in bArray, bLength - length of the installation params.
Regards, Eugene

Request for JCOP tool and gpShell tool download URL

Hi friends,
I am not able to get JCOP tool from any downloadable site. If any one have JCOP tool and other tools related to Java card pls send me to my email id [email protected]
Or pls send me the valid URL to download those tools.
regards,
dhaya.

Deborah,
It would have been helpful if you had posted here with Firefox, instead of IE; that way we would have seen the Firefox user agent. Based upon the cut off description you posted in the Topic field, your problem is likely caused by a modified user agent that the addons website doesn't understand.
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''general.useragent.'''
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
Then restart Firefox

Command Line Tools installs the latest version of clang (and others) in /Library/Developer/CommandLineTools/... but not in /usr/bin/

I've upgraded Xcode to the latest 5.1 Installed Command Line Tools via xcode-select --install Homebrew tells me "A newer Command Line Tools release is available"
brew --config:
Xcode: 5.1 CLT: 5.1.0.0.1.1393561416 LLVM-GCC: build 2336 Clang: 3.1 build 318
Checking my clang executable:
$ /usr/bin/clang --version Apple clang version 3.1 (tags/Apple/clang-318.0.58) (based on LLVM 3.1svn)
$ /Library/Developer/CommandLineTools/usr/bin/clang --version Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
So it appears Command Line Tools didn't install clang (and perhaps other executables) into /usr/bin? I checked my other laptop (w/ Mavericks), and /usr/bin/clang is version 5.1.
So I'm guessing this is the problem? I've tried to reinstall Command Line Tools as sudo, but now it won't let me install again (says software isn't currently available).
Can anyone help me with this? I've spent hours on it now, but can't find a solution.
Thanks

BTW, I installed Xcode 5.1 from the Store, but have never run xcode-select --install. Here is the verbose output from a clang.
xew ~/$:clang -v -o hello main.c
Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
Target: x86_64-apple-darwin13.1.0
Thread model: posix
"/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain /usr/bin/clang" -cc1 -triple x86_64-apple-macosx10.9.0 -emit-obj -mrelax-all -disable-free -disable-llvm-verifier -main-file-name main.c -mrelocation-model pic -pic-level 2 -mdisable-fp-elim -masm-verbose -munwind-tables -target-cpu core2 -target-linker-version 236.3 -v -resource-dir /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk -fdebug-compilation-dir /Users/xew -ferror-limit 19 -fmessage-length 100 -stack-protector 1 -mstackrealign -fblocks -fobjc-runtime=macosx-10.9.0 -fencode-extended-block-signature -fdiagnostics-show-option -fcolor-diagnostics -vectorize-slp -o /var/folders/zf/d5vqmmtn5mq7h6766jtlkrvr0000gn/T/main-353995.o -x c main.c
clang -cc1 version 5.1 based upon LLVM 3.4svn default target x86_64-apple-darwin13.1.0
ignoring nonexistent directory "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.9.sdk/usr/local/include"
ignoring nonexistent directory "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.9.sdk/Library/Frameworks"
#include "..." search starts here:
#include <...> search starts here:
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1/include
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/include
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk/usr/include
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk/System/Library/Frameworks (framework directory)
End of search list.
"/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain /usr/bin/ld" -demangle -dynamic -arch x86_64 -macosx_version_min 10.9.0 -syslibroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk -o hello /var/folders/zf/d5vqmmtn5mq7h6766jtlkrvr0000gn/T/main-353995.o -lSystem /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1/lib/darwin/libclang_rt.osx.a
xew ~/$:

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

Thank you - Just what I needed

What's the difference between CoBuilder and other development tools?

Is there any more excellent features about CoBuilder?
or What's the difference between CoBuilder and other development tools?
I just want to know more about it.
Thanks!

One more thing, if you do not have the hard drive icon on the desktop you can get it there by:
click on the desktop so the menu bar says Finder next to the apple logo, click Finder, then Preferences, General, Show These Items on desktop and check the hard disks:
That makes life a lot easier when you want to find out information.
Ralph

How to get tools and other bars back in view after deleting show-bar?

How to get tools and other bars back in view after deleting show-bar?

Hello Jouko.
You can go into View > Toolbars and select the ones you want to see. If you can't see the menu bar you can simply tab ALT on your keyboard (I think F10 works too) to show it.

Which conversion tools used in Sales, Shipment, Invoce, and other.....

Guys,
I know in general that best conversion tool for Customer Master is LSMW. What about the rest of the data to be converted to SAP such as Material Master, Sales, Shipment, Invoice and other historical data? Which tools do we use for these? Do we use LSMW again?
Thank you.

HI,
Yes LSMW can be used and you can also use CATTS to migrate data from Legacy system to SAP.
Regards
Milan
<b>Please reward with Points</b>

JCOP Tools 3.1.1.b and other Cards

Similar Messages

Maybe you are looking for