JDBC adapter type  not visible in Communication Channel

Hi All,
I have deployed JDBC driver according to http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type  not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also. Can any one tell me where the problem is?

Hi Kuldeep,
Have you check the patch level of both java & abap has same ,if some thing different in Patch level of any of this it will not visible in communication channel
Check below links also
https://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Sender JDBC adapter : data read from db but not in PI
Regards
K.N

Similar Messages

  • IDOC adapter is not shown in communication channel

    hi gurus,
    at present i am using PI and in the communication channel list (adapters types) no idoc adapter is displayed ,can anyone help me to solve this problem.
    and also when i create any scenario related to idoc those messages where not displayed in communication channel.

    Hi Allen,
          U r checking for an IDoc channels in Communication channel monitoring.IDoc adapter is reside in ABAP stack.So that u cant see the Idoc communication channels from monitoring of CC's. If Idoc messages is at sender side no need of CC.
    If you want to view the source and target messages of Idoc's u can see those from SXMB_MONI.Choose u r processed message,Dbl click,For Idoc as sender u can view the message from payloads of Inbound message,For Idos as Receiver u can view the message from Payloads of Request message Mapping.
    Hope it will helps..
    Cheers
    Veera
    >>>Reward points,if it is needful

  • JDBC Adapter configuration not initialized Error

    Hi,
    I am doing a RFC to JDBC scenario in PI 7.1. I am getting the following error:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: JDBC Adapter configuration not initialized: null
    In communication channel monitoring, it shows the following,
    Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL '<URL>': SAPClassNotFoundException: com.ibm.as400.access.AS400JDBCDriver
    The JDBC parameters for driver & connection are correct only.
    Is the problem related to deployment of JDBC driver or something else? How can i ensure that the JDBC driver deployment is succesful in PI 7.1?
    Edited by: senthil nathan on Mar 25, 2009 10:57 AM

    Hi Senthil,
    Your drivers are not installed properly. Please re-deploy them through SDM.
    Regards
    joel

  • JDBC Adapter configuration not initialized:null

    i
    we have a synchronous scenario with the following adapters , RFC <> XI <> JDBC.
    1.JDBC Driver installation is done
    2.RFC Destination type t is done in sap(sender) system.
    3.checking the jdbc in VA is done
    while running it is giving the following error.
    com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
    where we have to initialize JDBC Adapter configuration
    Thanks in advance
    Prasad Nemalikanti

    hi prasad
    There are 2 jar files that may be missing from your SQL JDBC driver --> msbase.jar and msutil.jar, I think once you add these to the driver it might work.
    also check  the driver string for the SQL  driver 2 parameters
    i.e 'com.microsoft.jdbc.sqlserver.SQLServerDriver' now becomes
    'com.microsoft.sqlserver.jdbc.SQLServerDriver'
    This will solve your problem
    follow this link
    Re: MS SQL Server jdbc Driver installation on XI .
    XI JDBC Adapter using stored procedures
    thanks
    sandeep
    Reward points if helpful

  • RFC to JDBC JDBC Adapter configuration not initialized: null

    Hi Experts,
    My scenario is Proxy to JDBC scenario. I got this problem when executing the interface I got this problem all of a sudden where previously it was working fine.
    there is no problem with the User id or password.
    com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
    let me know how to solve this.
    Thanks,
    Prem.

    I got this problem when executing the interface I got this problem all of a sudden where previously it was working fine.
    there is no problem with the User id or password.
    com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
    Can you ensure that Drivers are properly installed and no problem with them?
    Also proper connection parameters are maintained in the JDBC receiver Channel.
    Regards,
    Abhishek.

  • JDBC Adapter configuration not initialized

    Hi,
        I have tested one scenario for WebService to JDBC. Integration engine shows success message.But i got some error in Adapter engine. It shows "JDBC Adapter configuration not initialized".
    So, plz anyone give the solution for this problem.
    Regards
    Vijay

    Hi,
    1.Check whether the JDBCAdapter is Activated.
    2.Check if any firewalls are there frm client side and open
    3.Check the password used to connect the Database is correct one.
    If all these are fine..do the complete cache refresh once.
    Please award marks if found useful.
    Thanks
    Hamja

  • JDBC adapter is not polling as scheduled

    Hi,
    we have observed JDBC adapter is not polling database correctly. adapter is scheduled at every 1 second, but it is plooing for every 5 sec or 6 sec.
    is there any way the issue can be fixed?
    Thank You,
    Madhav

    hi,
    in my mind, the issue is your polling's choice of 1s !
    so to have a real-time exchange whereas you use a polling method to reach a server with is not the PI server itself, and perhaps also not on the same network, by opening perhaps also the database connexion at each request in order to call a SQL request or a stored procedure...
    I don't know your complete flow, but if you really need a 100% real time, maybe it should be better to trigger the sender JDBC adapter from outside when (and only when) the data is produced / changed in your database....
    Anyway, personally, I never recommend to have a polling of 1s. 10s (and often only 60s) is enough is most of the cases... because after the polling you have the XML conversion, the PI mapping, the sending to ECC, the ECC treatment... all these steps take time, and so the interest of checking of every 1s is (in my mind) clearly reduced by all these steps.
    (*) I'm sure if SAP will define a polling in milliseconds, some people would like to use a polling of 1ms, but that's a non-sens...
    regards.
    mickael

  • Adapter type is not coming in Communication channel

    Hi all,
             I am facing a problem while creating a communication channel as i am not able to see any adapter type and its showing as non editable field  .
    i have cretaed my own software component in SLD  am i missing something in SLD configuration ??  because of that  i am not able to see any adapter over there .
    regards,
    praveen

    Praveen,
    You need to import SAP BASIS Software Component Version into Integration Repository.
    You need to download it from service market place.
    https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
    In Search Term Enter "SAP BASIS <version>".
    Now click on XI CONTENT SAP_BASIS 7.00 -
    > Database independent -
    > SAPBASIS13_0-20000888.ZIP Just save this file on your machine and unzip it.
    Now put this in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
    In IR, TOOLS ---> Import design objects and import it.
    Regards,
    Sarvesh
    ***Reward points for helpfull ans, in your last thresd you did not assingned points to any buddy.

  • XI Adapter not visible in Comm Channel Monitoring ?

    Hi friends ,
    I am trying a proxy scenario in Discovery System V3 .But when we create XI receiver adapter we cannot see the status of that channel in communication channel monitoring .
    What could be the reason ? Any input will be appreciated
    Thanks.,
    V.Rangarajan

    Hi Vinod ,
    We are using SP12 .
    And also one more reason that u were unable to see XI adapter is that u might not have activated that adapter in your admin settings.
           I saw in JEE Admin . This Adapter is in Running mode .  the parameters are
      xiadapter.isconfig.username  PIAFUSER
         1. May i change it to PISUPER and give password ?
         2. http://localhost:50080/sap/xi/engine?type=entry   as   xiadapter.isconfig.url 
             but in CC monitoring  , IE Components  Test message tab i can see the url as   http://iwdfvm2160.wdf.sap.corp:51080/sap/xi/engine?type=entry
               will that port 50080 and 51080 will cause the problem ?
    Thanks.,
    V.Rangarajan

  • Adapter Engine Name is not displayed in Communication channel

    Hi All,
    In Integration Directory -- Service without party -- Business system -- communication channel -- when we create new communication channel  then go ahead selecting File , JDBC, Mail adapter. ADAPTER ENGINE IS DISPLAYED BLANK.
    Please let me know your valuable inputs.
    Regards
    Shiva

    I have performed all the above given instructions, but the issue is still pending.
    Steps followed :
    1. Performed all the steps in RZ70 as instructed.
    2.Downloaded the TPZ file and assigned it in the required path
    3.Adapter Engine is already assigned in the SLD.
    Can you let me know, whether to assign hostname, IPaddress or fully qualified domain name in the exchange profile( where exactly in JAVA stack and ABAP stack)
    Kindly request you to provide further inputs.
    Thanks for your valuable inputs
    Regards
    Shiva

  • Adapter Monitoring not visible

    Hi,
    I am not able to view Adapter Monitoring page in RWB. Rest all the pages from RWB are visible. Even in Message Monitoring option, under Adapter Engine, I am not able to see the details of message.
    I want to check status messages in receiver adapter. I have a file to mail scenario, in which file is picked up properly, I am able to see the successful message translation in SXMB_MONI. However, I am not receiving mail to my mailbox. I am not able to track the problem because I cannot view Adapter Monitoring page.
    Please let me know possible solutions to this one.
    Thanks,
    Bhavish

    Please look for the Channel Monitoring in XI 3.0 RWB. Adaptors are now part of channel monitoring in XI 3.0 now.
    Also note that XI have two type of adaptors ( Adaptors handled by J2EE Server and Adaptor handled by the Integration Server) RWB is only the J2EE side and if the adaptor belong to that category you will see the adaptor status in channel monitoring, otherwise note.
    To get the bottom line of it, go to XI Cache using SAP GUI, update the XI cache (complete update) Look into the cache entries for communication channels, check the type it should be CAE (Central Adaptor Engine), if it is IS( Integration Server) you will not see that adaptors messages in RWB.
    Thanks
    Thanks

  • Content type in SOAP receiver communication channel

    Hello,
    so far I thought that the SOAP receiver adapter always sets the content type to text/xml. However now I found out the following strange thing:
    If you check the option "without SOAP envelope" then the content type is application/xml. Is there any way to influence this as the receiver of the message only accepts text/xml.
    Have you had any similar experience?

    hi,
    - open SOAP receiver communication channel - module tab
    - add the module "localejbs/AF_Modules/MessageTransformBean" or AF_Modules/MessageTransformBean"  before the standard SOAP module
    - add the parameter = Transform.ContentType with value = text/xml
    I'm just not sure if you need to add value =  text/xml or "text/xml" so try the second one if the first one will not work
    does it work now?
    Regards,
    Michal Krawczyk

  • Communication channel not present in Communication channel monitoring

    Hi All,
    We have the communication channel in Integration builder and it is active state. but we are not able to see it in C.C monitoring. and we are not sure whether the channels are started.
    how can we check whether the channels are started?
    and why the communication channel is not visible in C.C monitoring.
    It works fine in DEV and QA. but we are facing this issue in PRD

    Hi Ravi,
    in the cache connectivity test, all the components are in GREEN color (Enterprise Service Repository, Integration directory, Integration server - ABAP, , mapping runtime on central adapter engine, adapter engine, mapping runtime) . Only central adapter engine is in yellow color and the message says:
    Apr 19, 2010 6:16:28 AM - Cache notification from Integration Directory received successfully
    Attempt to fetch cache data from Integration Directory not yet started or still in process.
    Restarting the server also did not work.

  • BD Lookup Error _ Not using the COmmunication channel!

    Dear all,
    I Tried to  do DB Lookup as told in this blog by siva
    /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    I used the below code.
    I am not Getting any error, the mapping is successfully ACTIVATED. But in the Receiver field i am Getting Null as output , the DB lookup which i have mentioned is not connecting to the Database and executing and fetching the query. Just inthe receiver field its througing the Null valuse. The Required Value is not fetched by using the communication channel.
    I am getting the above error when i try to TEST THE MAPPING in IR.
    Below is the code i used.
    SERVER:XI 3.0
    SP:18
    RECEIVER DATABSE: MSQL SERVER 2000
    CODE----
    //write your code here
    String Query = "";
    Channel channel = null;
    DataBaseAccessor accessor = null;
    DataBaseResult resultSet = null;
    Query = "Select cir_id from circle where cir_sap = 'IDBL'";
    try{
    channel = LookupService.getChannel("<Business Service/System Name>","JDBC_channel_receiver Communication channel");
    accessor = LookupService.getDataBaseAccessor(channel);
    resultSet = accessor.execute(Query);
    for(Iterator rows = resultSet.getRows();rows.hasNext();){
    Map rowMap = (Map)rows.next();
    result.addValue((String)rowMap.get("cir_id"));
    catch(Exception ex){
    result.addValue(ex.getMessage());
    finally{
    try{
    if (accessor!= null) accessor.close();
    catch(Exception ex){
    result.addValue(ex.getMessage());
    END CODE----
    Please help me out.
    I am getting output as null. But in database value is there for cir_id where cir_sap='IDBL'.
    Regards,
    Prakash

    As i told before i have tested the interface, its not showing any error, its Activated and throwing Null as output.
    Its not fetching the value from database. In CC Monitoring also the adapter is in Green Status. No error over there. Its throwing the output as Null (Default value in the code.)
    Below is the connection parameter i have used:
    DRIVER:com.microsoft.jdbc.sqlserver.SQLServerDriver
    CONNECTION : jdbc:microsoft:sqlserver://<IP>:1433;DatabaseName=test_db
    But in the blog
    /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    If u can see properly, he has mentioed some extra parameters in the JDBC Connection Parameters.
    But the screenshot is not proper so i am not able to see the querry he has used in Connection parameters.
    Please help
    Could anyone tell how to write the Select statement in Connection Parameter for Adapter as given (Partialy in screenshot in BLOG)?
    Regards,
    Prakash
    Edited by: senthilprakash selvaraj on Jul 1, 2008 7:33 AM

  • Configuration Wizard in ID is not using existing Communication Channel

    Hi,
    I am using PI 7.1.
    I created a Communication channel FileSenderCC for a Business System Sys_Sample_One_D with Party as blank.
    After creating i can see below object in the list of communication channels in the left pane.
    |Sys_Sample_One_D|FileSenderCC
    After this when i use Menu: Tools -> Configuration Wizard -> Internal Communication, to configure the scenrio, I selected the Business System Sys_Sample_One_D and Adapter Type "File", and proceed, while selecting the sender communicaiton channel, it cannot find the FileSenderCC that i created.
    If i manually enter FileSenderCC, and complete the scenario, it is creating a new communication channel with the samename, and not using the exisitng one.
    After that i see two communication channels in the left pane.
    |Sys_Sample_One_D|FileSenderCC
    *|Sys_Sample_One_D|FileSenderCC
    does this happen in PI 7.1 only, because when i worked in 7.0 long time back, i dont think i got this issue.

    Hi,
    I had the same issue on PI 7.1, it looks like a bug, but I found no note about it.
    I think you should open an OSS message for this.
    Kind Regards,
    Sergio

Maybe you are looking for