JDBC Adpter as Sender Problem

Hi,
I am running XI ver3.0 and I'm not able to configure JDBC Adapter as Sender correctly...
It seems, that all parameters are ok (since the Check option from the menu displays no error), but it doesn't work - When I check the database (Oracle 8.1.7), no session is there from the SAP.
So, where could be a problem?
a, JDBC Driver - I imported the .jar file with the JDBC classes into Imported Archives in the Repository. Is it correct? Or is it needed to be deployed in some special way on the server(as I read)?
b, What item exactly should I write in the text field for the driver? Should be there something lik 'oracle.jdbc.driver.OracleDriver' or is there used some Alias Name?
c, how can I test if the Adapter runs correctly? Is there any testing tool? Or just for testing the connection, if it's ok?
Thanx for your answers! Peter

Hi Peter,
> So, where could be a problem?
> a, JDBC Driver - I imported the .jar file with the
> JDBC classes into Imported Archives in the
> Repository. Is it correct? Or is it needed to be
> deployed in some special way on the server(as I
> read)?
What is the Jar file name that you have imported?
>
> b, What item exactly should I write in the text field
> for the driver? Should be there something lik
> 'oracle.jdbc.driver.OracleDriver' or is there used
> some Alias Name?
For e.g.
JDBC Driver: oracle.jdbc.driver.OracleDriver
Connection: jdbc:oracle:thin:@wbs045:1521:SAPE
> c, how can I test if the Adapter runs correctly? Is
> there any testing tool? Or just for testing the
> connection, if it's ok?
You can use the adapter monitor to check the status of the communication channel.
Depending on the SP you are in check the following URL for adapter monitor
http://server:port/mdt/amtServlet
or
http://hostname:portnumber/AdapterFramework/monitor/monitor.jsp
Regards,
Sridhar
Message was edited by: Sridhar Rajan Natarajan

Similar Messages

JDBC and FTP sender channels stop polling

Hi,
We have a great volume of sender JDBC and FTP sender channels.
For this reason there is nothing unusual to have temporary error connections.
Several months ago, with an XI 3.0 system, sender channels recover its functionality automatically when temporary error connection is solved.
But now, he have migrate to a PI 7.1 sytem, and in the same scenario and configuration, sender channel stop polling after a temporary error . In cc monitor this channels remains in green status and there were no signs of stopped interfaces.
Timeouts are correctly defined and there is no difference between channel configuration in our Xi and PI system.
How to solve this problem?
Thanks, in advance.
Carme.

Thanks for your fast response, Stefan.
After writing this post, i ask the same question to our basis team and we are in the latest sp.
¿do you know if there is any note or can you provide me some additional information?
I'm not able to find any note about this issue...
Regards,
Carme.

I need help with an email WiFi sending problem on my iPad 2

I’m having an email WiFi sending problem on my iPad 2     Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Rfc sender problem(sap r/3 -se37) 'alternativeServiceIdentifier: party/serv

Rfc sender problem: While executing the rfc in sap r/3 system
It is showing abap run time errors are
'alternativeServiceIdentifier: party/service from channel
configuration are not
(i have taken hint from this weblog /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step)
These are the configuration at sap xi and sap r/3 system
1) SAP XI (ID)
I have created rfc sender commuication channel in I.D.
      Rfc server Parameters->
            A.S.(Gateway)-> server    {sap r/3 server name}
            A.S.S.(Gateway) -> sapgw00
            program id         -> PDPT
     AND RFC Metadata repository parameter
2)SAP R/3 (SM59)
    Rfc destination -> PPPP
    Connection type -> T
    Technical Settings->
         (*) Registered Server Program
      Program ID ->    PDPT
Gate way options
      Gateway host -> server
      gateway service -> sapgw00
Testconnection-> connected
3) testing rfc at sap r/3(se37)
But when i am executing a rfc in sap system
Rfc target system -> PPPP
and some import parameters
and it is showing the error message as
'alternativeServiceIdentifier: party/service from channel
configuration are not '
4)SAP R/3( SMGW)
CONNECTION TO CLIENT FOR PDPT(TP NAME) REGISTER STATUS IS WAITING
Please help me how to solve this problem

Hi,
SAP Note 730870 FAQ: XI 3.0 RfcAdapter Q.no 15
<i>Q 15: Whats wrong when the error message "lookup of alternativeServiceIdentifier via CPA-cache failed" shows up while sending a RFC call to the RfcAdapter?
A: A RFC sender channel is located beneath a service within the Integration Directory. Within this service choose "Service" -> "Adapter-Specific Identifiers". The values in the fields "R/3 System ID" and "Client" has to be maintained with the correct values of the system, that sends the RFC call to the RfcAdapter. It normaly only makes sense to have these values filled for services of type "Business System". If maintained in SLD, this fields will be filled automaticaly for services of type "Business System" and can be updated with the button "Compare with System Landscape Directory".</i>
- Give correct appserver and gateway service details in XI.
- Open the service holding the RFC adapter you are trying to use. On the top menu, goto Service -> Adapter Specific Identifiers..
Regards,
Prateek

A new clue to the Apple Mail sending problems?

In my continuing efforts to fix the SMTP/POP mail failures with Apple mail, I've noticed a glitch that some of you more advanced readers might be able to decipher.
After lots of fruitless messing around with port numbers, preferences, and keychain fix attempts, what did work for me (temporarily) was a cleaning out of all the servers listed on the mail account options window, and then putting the original names and other info back in. Somehow, the mail app is spontaneously generating multiple combinations of server names, usually the original server name, plus a user name, the server name again, or some other redundant combination.
As I use mail to manage two separate POP accounts, sometimes it also creates hybrid server names by combining the server/user name pieces across both accounts.
This appears to happen entirely on its own; I had mail working for about 90 minutes, then it fell into this problem again. I'll probably have to keep cleaning it out, like a boat owner scraping barnacles off the hull, until Apple offers some kind of a patch.
Has anyone else who has the nagging "can't send SMTP mail" problem seen this phenomenon in their server/account preferences specs? If so, any ideas on how to stop this madness?

You haven’t said what the problem was in your case, i.e. what error message did you get when sending, if any, whether the mail account and the associated outgoing (SMTP) server were provided by your ISP or by someone else, etc.
Mail doesn’t spontaneoulsy generate outgoing server entries, but it keeps information about outgoing (SMTP) servers in a separate list independently of the mail accounts themselves. The account settings just associate one of the available outgoing servers with each account. Deleting an account doesn’t remove from the list the outgoing server that was associated with it. Orphaned or dangling outgoing server entries (i.e. not associated with any account) sometimes cause weird sending problems, and could very well have been the problem in your case as well.
As you appear to have already found out, you may go to Mail > Preferences > Accounts > Account Information > Outgoing Mail Server (SMTP), choose Edit Server List from the popup menu, and delete any servers that shouldn’t be there — the Edit Server List panel shows the account each outgoing server is associated with.

Entire JDBC communication stopped if problem with one single JDBC interface

Hello,
Will the entire JDBC communication stopped if problem with one single JDBC interface?
Thanks,
Soorya.

hi surya,
this will happend if u use maintain order at runtime at interface determination.
just uncheck this option if u dont neet EOIO.
if you are getting the problem if u r going for EO then the problem might be using same JDBC channel for all interfaces.
if each interface is expected with a high load then it better to go for dedicated channels for interfaces.
like INTERFACE A should use JDBC A channel and INTERFACE B should use JDBC B channel.
Thanks & Regards,
Rama krishna

JDBC communication stopped if problem with one single JDBC interface

Hello,
Can you please explain this phrase
"JDBC communication stopped if problem with one single JDBC interface"
THanks,
Soorya

If you are having a problem with a JDBC interface (lets consider this to be a communication channel) then the communication is stopped (via that channel) (only in the case of EOIO).
Hope this clarifies.
Cheers,
Sarath
Award if helpful.

Parallels xp unable to send problem report?

Parallels desktop 7
I have old version of XP, parallels does not detect (virtual machine is not available) when I locate, set up.exe is grey
I am unable to send problem report? please check network settings and try again, my network settings are working, I'm sendint this thread?? emails sending and recieving, any help would be really appreciated
Tks
Gary

You ain't gonna believe this but:
In 2006 I tried half heartedly to set up parallels and just took a look at a response I got, it suggested.
There's a bug in the Apple firmware in the Mac Pro that prevents the hardware virtualization support that's built into the processor from being used. Since you will be running a VM (Virtual Machine) to install your guest OS, hardware virtualization support will let your VM run directly on the processor hardware. Without Vt-X support, software emulation is required, which is many times slower.
Sometimes, putting your Mac to sleep and waking it up will allow getting around the Apple bug and allow Vt-X to work, speeding up your VM.
Well I just put mine to sleep and the bloody thing downloaded perfectly, go figure.
Shootist, you were perfectly correct, I was just frustrated and was trying anything.
Actually Tempelton, I put it here and parallels because I think it's a combo problem, but, thanks for your help anyway mate. Also, I do like a little Robert Johnson matter of fact the Blues Bros were real good at sweet home chicago too
Thanks all

Mail locked up because of sending problem. How do I stop the send function?

Mail locked up because of sending problem. How do I stop the send function?

Didn't help. Wound up talking to A Support & deleting the cache in my Library Mail file then restarting. Thanks anyway.

Adobe Send - Problem with uploading files. When is this going to get fixed?

When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.

The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod

Yahoo! Mail send problem

Hello all, anyone know when we will see a fix for the Yahoo! Mail sending problem? (This is when the iphone appears to have sent an email by playing the "swoosh" sent mail sound, but the message was not sent, the way users have been getting Yahoo! Mail to send again is by turning their iphone off then back on).
Cheers

For what it's worth I also had this problem with Yahoo mail on my iPhone. After getting tired of waiting for Yahoo to do something about it, I decided to cancel my Premium Yahoo account and switch to Gmail. I have to tell you Gmail has been amazing and I haven't looked back since. IMAP Gmail on my iPhone has made my email experience a pure joy.
BTW - I had my Yahoo account for over 7 years. And did you know that Yahoo is an acronym for You Always Have Other Options? Well I took them up on their advice since I wasn't too impressed with their service! My 2 cents.

"Send" Problem with Mail

When I reply to an email in Mail, the "send" button in the reply message windeow is greyed out and will not function. This has occured since the machine was updated to OS X Tiger. What is the fix?

In case you're missing something, instructions for setting up an AOL account in Mail can be found here:
http://members.aol.com/adamkb/aol/mailfaq/imap/applemail.html
The instructions are for Mail 1.3, but they can be used for Mail 2.x as well, noting that the Special Mailboxes preference pane is called Mailbox Behaviors in Mail 2.x.
You may also want to read the more general guide the above article is part of:
Accessing the AOL Mail System using IMAP - An Unofficial Guide
Also, Mail Help has some articles devoted to sending problems, e.g. I can't send email or I can't send email because the connection to the server on port 25 timed out. You may want to take a look at them in case there is something there that applies to you. Something that usually works is changing the outgoing server port to 587 instead of 25.

Sender JDBC adapter...problem

Hi,
the real problem is Sender JDBC adapter sends data in following format.
<?xml version="1.0" encoding="UTF-8"?>
<resultset>
<row>
     <Associate_ID>16444</Associate_ID>
     <Associate_Name>Sudhir</Associate_Name>
     <Status>false</Status>
</row>
</resultset>
But in Design time mapping...structure of source message will be like
<?xml version="1.0" encoding="UTF-8"?>
<ns5:DB2File_DB_MT xmlns:ns5="urn:db2file">
<Resultset>
    <Row>
      <Associate_ID>16444</Associate_ID>
      <Associate_Name>Sudhir</Associate_Name>
      <Status>false</Status>
    </Row>
</Resultset>
</ns5:DB2File_DB_MT>
How does this tag ... <ns5:DB2File_DB_MT xmlns:ns5="urn:db2file"> get generated in runtime
and apart from 1 to 1 mappings b/w the three fields above in the row tag...wt other mappings to be performed
Pls help...
Sunita

Hi Sunita,
what i understood from your query is namespace tag is coming while message mapping. This namespace can be avoided in the message type if you keep the XML namespace field empty while creating message type. But i afraid you have to do the message mapping again.
Regards,
Satish

Error in Sender JDBC adpter

Hi,
I got the following error in sender communication channel monitoring.
Error during database connection to the database URL 'jdbc:odbc:Driver = (Microsoft Access Driver (.mdb)); DBQ = //db/TestDB.mdb using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver = (Microsoft Access Driver (.mdb)); DBQ = //172.19.61.54/jdbc/T': java.lang.NullPointerException'
Pleae help me to solve this error.
Thanks,
Sreedivia

hi
check whether MS Access drivers deployed correctly or not
check with the basis team
also check this blog
Connecting to MS Access using receiver JDBC Adapter
Connecting to MS Access using receiver JDBC Adapter (Without DSN)
regards
kummari

JDBC SENDER PROBLEM

HI,
I M DOING JDBC - XI -FILE SCENARIO
JDBC SENDER POLLS THE DATA BASE BUT ITS NOT POLLING THE DATA IN THE DATABASE.IN COMM CHANNEL MONITORING ITS SHOWING PROCESSING FINISHED SUCCESFULLY BUT THERE ARE NO MESSAGES
SHOWN IN SXMB_MONI.
PLZ HELP

Hi Vikas,
Just check the selet query is doing ok and this blog
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
Sachin

JDBC Adpter as Sender Problem

Similar Messages

Maybe you are looking for