JDBC Async-Sync bridge does not work

Hi folks.
I read the how to guide How To Realize a sync-async and async-sync bridge within the Adapter Framework and I found some tips at SDN (i.e File - RFC - File without a BPM - Possible from SP 19.) . So on, I created a scenario JDBC<=>SOAP.
My scenario:
1 JDBC adapter sends an async request to SOAP
2 SOAP creates an object in its system and then sends a sync confirmation response to the sender (async JDBC adapter Receiver)
Module Tab of JDBC Sender
Processing Sequence
AF_Modules/RequestResponseBean          1
CallSapAdapter                    2
AF_Modules/ResponseOnewayBean     3
Module Configuration
1 passThrough     true
3 adapterNamespace     http://sap.com/xi/XI/System
3 adapterType          JDBC
3 receiverChannel     JDBC_Object_Receiver
3 receiverService     Legacy_Service
The problem is the scenario works fine until an error is detected on communication channel (Receiver). Any kind of error, as communication problem, insert/update problem or procedure types problem. When this thing happens, communication channel (Sender) posts the next message and a persist error appears, like that
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MSGGUID_EXISTING</SAP:Code>
<SAP:Stack>Message ID XXXX for pipeline CENTRAL, version already exists in system</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
After this, all the next messages remain at "Processing started".
This persist error message becomes constant in the system. It is executed once an hour approximately.
I have already tried solving this problem deleting the adapter and recreated it again, but the behavior remains the same.
This is the SOAP Header Main
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>6F5A54B3-96DF-C744-8BF6-A4D4B9289C5D</SAP:MessageId>
<SAP:RefToMessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:RefToMessageId>
<SAP:TimeSent>2007-03-23T14:31:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service />
<SAP:Interface namespace="" />
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>VUC</SAP:Service>
<SAP:Interface namespace="http://oesp0115/xi/webservices">Cliente_THOR_OB</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://oesp0115/xi/webservices">Cliente_THOR_OB</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MSGGUID_EXISTING</SAP:Code>
<SAP:P1>F6BC6270D94A11DBB6D000188B40F2CF</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID F6BC6270D94A11DBB6D000188B40F2CF for pipeline CENTRAL, version already exists in system</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-03-23T14:31:30Z" wasRead="false">
<SAP:Engine type="AE">af.xid.oesp0115</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2007-03-23T14:31:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.oesp0115</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20070323</SAP:Date>
<SAP:Time>113130</SAP:Time>
<SAP:Host>oesp0115</SAP:Host>
<SAP:SystemId>XID</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>DB6</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PIAFUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:Logging>1</SAP:Logging>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId />
<SAP:PipelineService />
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="001">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>1304</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>3744</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>1304</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterOutbound>AENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>14</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>56A2F666C66538F48BCD76B50034F91C</SAP:Sender_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="oesp0115">20070323143130.699</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.87</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XID</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-23T14:31:30Z BRAZIL</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE">
<Trace level="1" type="T">Message-GUID = F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = BE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into *MAST*</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST">
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into *MAST*</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="T">SystemError message generated. Guid: 6F5A54B396DFC7448BF6A4D4B9289C5D</Trace>
<Trace level="1" type="T">Error during execution of message : F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into MAST</Trace>
</Trace>
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Someone can help me?
Regards
Rafael

Hey Rafael,
I've heard of ur problem by Carol Garcia.
I still think the problem was related to the fact that you were commiting the work at JDBC adapter, even though your DB (it was Oracle, right?) supports internal commit. I do aggree that this scenario should work for non-commiting DBs, though. Thus it is a bug, and the note is relevant.
Anyway, did you try to commit the work at DB side? I think it should have resolved your case (even though the bug would still exist, but it would not impact you).
Regards,
Henrique.

Similar Messages

I have a ipod 2nd gen it is full cannot delete,the sync button does not work,says use cd that came with ipod

ihave a ipod 2nd gen it is full cannot delete,the sync button does not work,says not used anymore,says use a cd that came with,,also cannot download itunes store,it says ios is out dated

If you can't copy your purchases by right clicking on it in the device list and choosing "transfer purchases", download the apps again for free: http://support.apple.com/kb/HT2519
Music can only be downloaded once.

Proxy-Soap-Jdbc Async/Sync Bridge

Hi,
I have proxy soap requestsoap response-jdbc syncronous scenario. i have used async/Sync bridge for that.
I m getting NO_RECEIVER_CASE_ASYNC, No receiver could be determined error.
I have created :
2 Datatype for proxy sender and jdbc receiver and 2 MT
6 Service interface :
        one abastract syncronous for proxy sender and jdbc receiver
        one abstract asyncronus for proxy sender
        one outbound asyncrous for proxy sender
        one abstract asyncronus for jdbc receiver
        one inbound asysncronus for jdbc receiver
        one abstract syncronous for SOAP request and response
2 message mapping for request and response
1 operation mapping using abastract syncronous for proxy sender and jdbc receiver with   abstract syncronous for SOAP request and response
BPM steps
two container request and response
receiver- send1- send2
receiver for asyncrous and file request
send1 for syncrouns for request and response
send2 for asyncrouns response.
Activated the IR.
ID Part.
Imported BPM from Design and created two business component one for SOAP receiver and one for proxy sender and jdbc receiver.
Created 3 Reciver Determination as proxy sender to bpm, bpm to soap, bpm to jdbc receiver.
Created 3 IInterface Determination as proxy sender to bpm, bpm to soap, bpm to jdbc receiver.
Created 2 Receiver Agreement as bpm to soap, bpm to jdbc receiver
Activated and run the proxy . in sxmb_moni i m getthing No receiver could be determined error.
I have checked the BPM ,No semantic errors found.
cleared the cache with sxi_cache and full refresh url.
Please suggest me with above details.
Regards
Laxmi Bhushan Jha

like in operation mapping we have abstract syncronous interface which has proxy as sender and jdbc as response
receiver to SOAP reuest and response...
Either of us seem to be confused!
This is your scenario (as per my understanding)
Receive (Proxy_message) --> Transformation --> Send (Mode = Sync...SOAP message) --> Transformation --> Send (mode = Async..JDBC req)
If the requirement is correctly understood by me then:
You should have one ASYNC-Outbound and ASYNC-Abstract interface for your Proxy-side.....proxy to be developed on the ASYNC-Out interface.
You should have a SYNC-ABS and SYNC-IN interface for SOAP req and resp.
You should have one ASYNC-IN and ASYNC-ABS interface for your JDBC side.
Mapping to be developed between PROXY_Async and SOAP_Req_Async & SOAP_Resp_Async and JDBC_Async.
Regards,
Abhishek.

Laoding files into layers from bridge does not work

Using photoshop ver 14.2.1x64 and bridge on a PC.. While in Bridge, I selected 2 pictures, selected tools, photoshop and load files into layers. It does not work. any ideas of how to make it work

You get 5 gold stars, I also have cc2014 and it works, thank you.
On Wed, Oct 29, 2014 at 4:56 PM, Warunicorn <[email protected]>

Apache-Weblogic Bridge does not work?

I've gone thru' the documentation regarding setting up of apache-weblogic bridge, but still it does not work. Does anyboday have any more details regarding this...EnvironmentOS - Solars 5.7Weblogic - 5.1 SP 8Apache 1.3.12

I've given up and had to go back to running "Double NAT" which also reports as a "problem" within the AEBS, but I just "ignore" it so the light will always be green.
It still ***** though, as "Double NAT" is also a reason for "Back to my Mac" not working properly, but how the ** am I supposed to avoid Double NAT when the wireless will not work in bridged mode?!

PSE7 BACKUP/SYNC AGENT does not work.

Under the Preferences box , the Backup/Sync Agent does not open. I can't alter or change anything. When I sign in , my sign in and password are both accepted ,however where the Welcome is on top, it used to say Welcome, with my first name. It does not do this anymore. When I try to upload my pics to Photoshop.com it states I am not logged in. No one at Adobe has been able to help after 4 months .

Hi,
Can you please contact me on [email protected]
I would like to suggest few things offline...

Thunderbolt-Bridge does not work after Yosemite upgrade

Hi,
recently I upgraded my MacBook pro (late 2013) to OS X 10.10.
Now the thunderbolt - gigabit ethernet bridge is not recognised anymore.
More specific the "Network Preference" pan does say that it is disconnected -> no network connection.
At the same time the "System Information" window does say it is connected.
I already tried several reboots, a reboot in save mode and deleting the networks environments to start from scratch.
But nothing helps.
Before the upgrade, the bridge worked fine (sometimes it was recognised slowly).
The bridge itself is a original apple bridge with firmware version 5.5 (PMFV 0.0.8).
Any ideas?
Cheers, freeman

Hmm, there is a lot of red.
EtreCheck version: 2.1.3 (106)
Report generated 16. Dezember 2014 16:28:18 MEZ
Hardware Information: ℹ️
MacBook Pro (Retina, 13-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,1
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris -
Color LCD spdisplays_2560x1600Retina
PL2409HD spdisplays_1080p
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 7 days 18:4:18
Disk Information: ℹ️
APPLE SSD SD0256F disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (16.34 GB free)
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Logitech USB-PS/2 Optical Mouse
Apple, Inc Apple Keyboard
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Transmit.app
[loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) [Support]
/Library/Application Support/Hotspot Shield
[loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) [Support]
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4228 - SDK 10.8) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.Maps.pushdaemon.plist
[failed] com.apple.sbd.plist [Details]
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist [Details]
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist [Details]
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.nsurlsessiond.plist [Details]
[failed] com.apple.periodic-daily.plist [Details]
[failed] com.apple.periodic-weekly.plist [Details]
[failed] com.apple.softwareupdate_download_service.plist [Details]
[failed] com.apple.systemstats.analysis.plist [Details]
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[invalid?] com.cisco.anyconnect.gui.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
[not loaded] com.teamviewer.teamviewer.plist [Support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Support]
[running] jp.co.canon.CUPSPS2.BG.plist [Support]
[loaded] org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[running] com.anchorfree.ajaxserver.plist [Support]
[running] com.cisco.anyconnect.vpnagentd.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[not loaded] com.teamviewer.teamviewer_service.plist [Support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
Citations Programm (/Applications/Papers.app/Contents/SharedSupport/Citations.app)
Bartender Programm (/Applications/Bartender.app)
iTunesHelper Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
TransmitMenu Programm (/Applications/Transmit.app/Contents/MacOS/TransmitMenu.app)
AeroFS Programm (/Applications/AeroFS.app)
owncloud Programm (/Applications/owncloud.app)
BetterSnapTool Programm (/Applications/BetterSnapTool.app)
Internet Plug-ins: ℹ️
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.235 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Mathematica: Version: 10.0.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
AdBlock [Installed]
ClickToFlash [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
TeXDistPrefPane [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 233.43 GB
Destinations:
TMBackup [Network]
Total size: 982.05 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 982.05 GB > (Disk size 249.77 GB X 3)
LACIE SHARE [Local]
Total size: 400.08 GB
Total number of backups: 12
Oldest backup: 2014-10-20 13:12:53 +0000
Last backup: 2014-12-07 20:24:45 +0000
Size of backup disk: Too small
Backup size 400.08 GB < (Disk used 233.43 GB X 3)
Top Processes by CPU: ℹ️
      49% WindowServer
      3% Little Snitch Agent
      1% Mathematica
      1% WolframWorkbench
      1% coreaudiod
Top Processes by Memory: ℹ️
352 MB Safari
301 MB Mail
232 MB WolframWorkbench
223 MB Finder
129 MB aerofsd
Virtual Memory Information: ℹ️
153 MB Free RAM
2.26 GB Active RAM
2.05 GB Inactive RAM
1.93 GB Wired RAM
99.60 GB Page-ins
3.48 GB Page-outs
Diagnostics Information: ℹ️
Dec 14, 2014, 11:27:06 PM ajaxserver_2014-12-14-232706_MacBook-Pro.crash
Dec 14, 2014, 11:26:14 PM ajaxserver_2014-12-14-232614_MacBook-Pro.crash
Dec 14, 2014, 11:25:43 PM ajaxserver_2014-12-14-232543_MacBook-Pro.crash
Dec 14, 2014, 11:24:40 PM ajaxserver_2014-12-14-232440_MacBook-Pro.crash
Dec 14, 2014, 11:24:09 PM ajaxserver_2014-12-14-232409_MacBook-Pro.crash
Dec 14, 2014, 11:23:58 PM ajaxserver_2014-12-14-232358_MacBook-Pro.crash
Dec 14, 2014, 01:13:42 AM ajaxserver_2014-12-14-011342_MacBook-Pro.crash
Dec 14, 2014, 01:12:08 AM ajaxserver_2014-12-14-011208_MacBook-Pro.crash
Dec 14, 2014, 01:14:24 AM ajaxserver_2014-12-14-011424_MacBook-Pro.crash
Dec 14, 2014, 11:26:46 PM ajaxserver_2014-12-14-232646_MacBook-Pro.crash
Dec 14, 2014, 11:25:01 PM ajaxserver_2014-12-14-232501_MacBook-Pro.crash
Dec 14, 2014, 11:24:30 PM ajaxserver_2014-12-14-232430_MacBook-Pro.crash
Dec 14, 2014, 01:14:45 AM ajaxserver_2014-12-14-011445_MacBook-Pro.crash
Dec 14, 2014, 01:12:29 AM ajaxserver_2014-12-14-011229_MacBook-Pro.crash
Dec 14, 2014, 01:11:58 AM ajaxserver_2014-12-14-011158_MacBook-Pro.crash
Dec 14, 2014, 11:25:22 PM ajaxserver_2014-12-14-232522_MacBook-Pro.crash
Dec 14, 2014, 11:26:04 PM ajaxserver_2014-12-14-232604_MacBook-Pro.crash
Dec 14, 2014, 11:24:51 PM ajaxserver_2014-12-14-232451_MacBook-Pro.crash
Dec 14, 2014, 01:13:01 AM ajaxserver_2014-12-14-011301_MacBook-Pro.crash
Dec 16, 2014, 02:52:02 PM Quicksilver_2014-12-16-145202_MacBook-Pro.crash
Dec 15, 2014, 02:27:36 PM SourceTree_2014-12-15-142736_MacBook-Pro.crash
Dec 14, 2014, 11:27:17 PM ajaxserver_2014-12-14-232717_MacBook-Pro.crash
Dec 14, 2014, 11:26:56 PM ajaxserver_2014-12-14-232656_MacBook-Pro.crash
Dec 14, 2014, 11:26:25 PM ajaxserver_2014-12-14-232625_MacBook-Pro.crash
Dec 14, 2014, 11:25:53 PM ajaxserver_2014-12-14-232553_MacBook-Pro.crash
Dec 14, 2014, 11:25:32 PM ajaxserver_2014-12-14-232532_MacBook-Pro.crash
Dec 14, 2014, 11:25:11 PM ajaxserver_2014-12-14-232511_MacBook-Pro.crash
Dec 14, 2014, 11:24:19 PM ajaxserver_2014-12-14-232419_MacBook-Pro.crash
Dec 14, 2014, 01:15:17 AM ajaxserver_2014-12-14-011517_MacBook-Pro.crash
Dec 14, 2014, 01:15:06 AM ajaxserver_2014-12-14-011506_MacBook-Pro.crash
Dec 14, 2014, 01:14:56 AM ajaxserver_2014-12-14-011456_MacBook-Pro.crash
Dec 14, 2014, 01:14:35 AM ajaxserver_2014-12-14-011435_MacBook-Pro.crash
Dec 14, 2014, 01:14:14 AM ajaxserver_2014-12-14-011414_MacBook-Pro.crash
Dec 14, 2014, 01:14:03 AM ajaxserver_2014-12-14-011403_MacBook-Pro.crash
Dec 14, 2014, 01:13:53 AM ajaxserver_2014-12-14-011353_MacBook-Pro.crash
Dec 14, 2014, 01:13:22 AM ajaxserver_2014-12-14-011322_MacBook-Pro.crash
Dec 14, 2014, 01:13:11 AM ajaxserver_2014-12-14-011311_MacBook-Pro.crash
Dec 14, 2014, 01:12:50 AM ajaxserver_2014-12-14-011250_MacBook-Pro.crash
Dec 14, 2014, 01:12:40 AM ajaxserver_2014-12-14-011240_MacBook-Pro.crash
Dec 14, 2014, 01:12:19 AM ajaxserver_2014-12-14-011219_MacBook-Pro.crash
Dec 14, 2014, 11:26:35 PM ajaxserver_2014-12-14-232635_MacBook-Pro.crash
Dec 14, 2014, 01:13:32 AM ajaxserver_2014-12-14-011332_MacBook-Pro.crash

Bridge does not work for wireless clients - connecting to existing network.

Hi - I really hope somebody can help out here, after hours of trial & error, I have finally given up
I need to connect my Airport Extreme Base Station to my existing network. I have a linksys router (192.168.15.1) connected to my modem and this linksys router acts as DHCP server too.
I suppose I have to use "bridge mode" for that to work. But should the linksys be connected to the AEBS using the AEBS's WAN or LAN port?
If I use "bridge mode", then wired computers to the AEBS works fine - getting an IP from the linksys etc. BUT, the wireless clients will have a self-assigned IP and not get through to the internet. It's like the AEBS will not allow wireless clients to "get through" unless AEBS itself is handing out IP addresses.
Page 36 of this manual ( http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf ) shows the setup I want. But in the picture, it says "Ethernet WAN port" but the text says: "The Apple wireless device (in this example, a Time Capsule) uses your Ethernet network to communicate with the Internet through the Ethernet LAN port ( <--> )." I don't know which one to use, WAN or LAN - they show WAN but say LAN?
When I set it up as "share an IP address", the AEBS status tells me "double nat" and to change from "shared IP" to "bridge mode". I do that, and everything seems fine - for the wired clients. Now the wireless clients cannot connect, Airport on the MacBook Pro just say "Connection failed" and the MacBook says "Invalid password" (translated from danish), even though I set the Airport Utlity to save the password in keyring, so it should be correct... If I disable wireless encryption, the wireless clients will connect but get a self-assigned IP, and therefor not work (cannot get online)...
It seems the only way I can get wireless to work, is if I set AEBS up as DHCP, but then it won't be on the "same network" as the linksys (192.168.15.1), but rather on 10.0.x.x as I select. If I select 192.168.x.x within AEBS, I'm also getting some error messages, conflict/subnet thing.
Anyway - I really hope somebody knows how to get wireless clients to get an IP address from existing ethernet when connected to the AEBS.
Thanks!!

I've given up and had to go back to running "Double NAT" which also reports as a "problem" within the AEBS, but I just "ignore" it so the light will always be green.
It still ***** though, as "Double NAT" is also a reason for "Back to my Mac" not working properly, but how the ** am I supposed to avoid Double NAT when the wireless will not work in bridged mode?!

ActiveX Bridge does not work in 1.4.2_04?

I tried my JavaBean with jre 1.4.2_04.
Java Plugin started up at CreateObject("XXX.Bean.1") and popped up an error statement.
Here is the stack trace:
java.lang.UnsatisfiedLinkError: getBrowserProxySettings
     at sun.plugin.net.proxy.WIExplorerProxyConfig.getBrowserProxySettings(Native Method)
     at sun.plugin.net.proxy.WIExplorerProxyConfig.getBrowserProxyInfo(Unknown Source)
     at sun.plugin.net.proxy.PluginProxyManager.reset(Unknown Source)
     at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
     at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
The JavaBean was packaged with 1.4.2_03, so I repackaged with 1.4.2_04.
But the result was the same.
Does anyone have the same problem?

Hi,
we successfully use the AX bridge in jre 1.4.2_04. The stack trace points to a more common problem with the Java Plugin. Did you try to run an applet? Does it work?
java.lang.UnsatisfiedLinkError: getBrowserProxySettings You should take a look at the settings in the Java Plugin configuration panel? (Start -> Settings -> Control Panel -> Java Plugin)

Iphone 6 and Ford Sync Bluetooth Does Not Work

Brand new iPhone 6 paired with My Ford Sync in a 2014 Escape.
Bad news, the bluetooth phone features simply do not work. You can initiate a call form the Sync and the phone will dial and connect, but 5 seconds into the call the bluetooth disconnects the phone audio and returns you to your radio or whatever source you were listening to.
The call appears to remain active on the iPhone but you can't access it.
Sure hope Apple or Microsoft/Ford step up to fix this soon it is a real show stopper.
Nothing like in the field beta testing.

I had a similar problem with my 2011 Ford Fusion and brand new iPhone 6 received yesterday. I restored my iPhone 5 to my new iPhone 6 when I received it. My iPhone 6 has the same device name as the iPhone 5 did. I was able to pair my iPhone 6 with Sync easily, but Sync would only ring on incoming calls. I could not answer the incoming call or initiate calls through Sync. I was able to correct the problem this morning by:
1) Forgetting This Device (Sync) in the Bluetooth application in the iPhone 6,
2) Deleting All Devices in the Sync Phone Bluetooth menu.
3) Re-pairing the iPhone 6 with Sync.
Apparently the same phone name stored in Sync from the iPhone 5 was corrupting the settings for the iPhone 6 using the same device name.
I hope this helps. Good luck!

Iphone sync Calendar does not work

I just loaded OS X 10.9 and iPhone 7.0.3
NOW I cannot get my iPhone to sync with my calendar using itunes.
If i add an entry to the phone calendar app, it does not sync to the iMac calendar and vice versa.
What to do ???

Click Settings>Mail,Contacts,Calendars>iCloud>Contacts (radio button is on (green))
This will sync the iCloud calendar, but not the "on my Mac calendar"

Sync password does not work

My hard drive was starting to crash and I was going to have someone come out and put in a new one for me. I couldn't find out how to back up my info so I figured I could sync my info and get it from firefox later. I wrote down the password and saved it in a file that I later recovered from my hard drive. The password, name, and sync password do not get me my information. I know the sync password is correct because I got it down twice. I really really need some of that information and I can't just create a new sync password since my old hardrive is long gone and creating a new password says it will delete the old saved information. Please, please, please, tell me there is something I can do to retrieve my info?
I can sign in to my sync account

Does the password work at https://account.services.mozilla.com/ ?

HT1386 Does this work for anyone? For a company who spouts "It Just Works" this WiFi sync just does not work.

What's up with WiFi sync? Is there a trick to it? I get it to work once and then it just doesn't work again. I have an iPhone 5, iPad 3, iOS 6, IMac 2011, latest OS and iTunes, a Cisco E4200. How the heck do you make it work?

Is your computer ON while you're trying to sync through wifi? Sync through wifi will work only if your computer is running at the same time.

Batch rename in Adobe CC Bridge does not work. Is there any fix for this problem?

Hi,
I'm using Adobe CC Bridge to batch rename a folder of RAW files. Version 6.0.1.6. I've got the latest Mac Pro running Maverick. I set up the parameters in the Batch Rename tool, but when I hit Rename, nothing happens. Is there anything I can do to fix this problem? Is anyone else experiencing this? Adobe can you fix this bug?

I am experiencing this same (or related) bug with using the batch rename inside of Bridge CC (Mac OS X 10.9.5).
First I filter out a subset of a folder of images that I want to batch-rename, then on the 12 or so thumbs I selected, I invoke the "batch-rename" dialog box... it presents its usual options, which work the first time. Subsequent attempts fail.
I close the search filter, I re-type my filter, I close the bridge window, re-open the bridge window, etc. to no avail.
It's interesting to note at this point, the program won't quit; it has to be force-quit.

Help, my Bridge does not works well with my AfterEffect. does not preview .ffx files

Hi,
I have some problem with my Bridge. When i browse preset from my After Effect in Bridge, it won't preview all of the After Effect preset(*.ffx), but my Bridge works well with photoshop files, it will preview all the photo files inculding .PSD. Does anyone knows what's the problem? Anyone knows how to fix it? I need help to fix this problem to get my work in AfterEffect, it is very hard to get things work it won't preview the preset. Thanks.
Best Regrads,
Chongkkmy

Found this link, does it address your problem?
http://forums.adobe.com/click.jspa?searchID=769246&objectType=2&objectID=1794899

JDBC Async-Sync bridge does not work

Similar Messages

Maybe you are looking for