JDBC features supported

Hi
Please can somebody tell me if the Oracle 8i Lite JDBC driver supportes these JDBC 2 features:
a) Datasource
b) updatable resultset
c) rowset
Thanks
Pete

http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/java.920/a96654/jdbc20ov.htm

Similar Messages

What version of JDBC do the Oracle9i 9.2.0.1 JDBC Drivers Support?

Hi,
I've just spent a good hour trying to figure out what JDBC version the oracle drivers (Oracle9i 9.2.0.1 JDBC Drivers) actually support, and havn't managed to find an answer.
ie JDBC 1.x JDBC 2.x or JDBC 3.x
The readme file proudly says:
JDBC 3.0 feature support
A few critical JDBC 3.0 features are supported.but it doesn't go on to say WHAT VERSION it FULLY supports.
When I use the JDBC methods:
OracleDriver driver = new OracleDriver();
int majorVersion = driver.getMajorVersion();
int minorVersion = driver.getMinorVersion();
I get majorVersion = 1 and minorVersion = 0, which I hope isn't true.
So what version is it really?
Thanks for helping my sanity!
Cheers,
Daniel.

http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/java.920/a96654/jdbc20ov.htm

Does Oracle JDBC driver support cancel()?

In JDBC API, class Statement has a cancel method, and its support depends on the implementation of the JDBC dirver.
Does any Oracle JDBC driver support this feature? Thanks.

Does any Oracle JDBC driver support this feature? Thanks.
It is supported (but not by the server-side Thin driver); the return value will be "ORA-17015 Statement was cancelled"
cheers,
Mary

What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?

What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?

• PI provides visibility for autonomous clients within the same list view as lightweight and wired clients (client list page).
• Rogue AP detection for autonomous AP's is not supported (it's supported in CUWN).
• Alarms/events for client authentication issues (e.g. authentication failure) are displayed in PI.
• Config management for autonomous AP's is via CLI template. Config comparison and archiving functionality in PI leverages these same features that were brought in from LMS, so need to defer to others in terms of whether this is a cross-platform feature in PI or is only supported on a subset of platforms. Config comparison/archive is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client sessions, etc.) reports, and there are extensive reports for CUWN

Direct File access feature supported in OWA 2010 ?

Is the direct file access feature supported in exchange 2010 ?
If not, why is there still an option to enable and customize it in 2010 ?

Is the direct file access feature supported in exchange 2010 ?
If not, why is there still an option to enable and customize it in 2010 ?
It is an orphan that will be removed from EMC is a future update. The feature itself has been removed from 2010, you can no longer access SharePoint or file servers through OWA. There is still "direct file" access in OWA, but in the spirit of being able to directly open an attachment without being forced to use the web viewer.Brian Day, Overall Exchange & AD Geek
MCSA 2000/2003, CCNA
MCTS: Microsoft Exchange Server 2010 Configuration
LMNOP

JDBC 10g - Support for TNS name entries

Hello,
I found the following statement:
JDBC-Thin support for TNSNAMES.ORA Lookup: similar to JDBC-OCI, both client-side and server-side JDBC-Thin can now read the local TNSNAMES.ORA file to resolve service name or TNS alias. Consequently Java in the database will also be in position to reference external Oracle database, using service name. See the JDBC documentation for more details.
in the Oracle white paper "What’s New for Java DB, JDBC, and Database Web Services in Oracle Database 10g". However, I have found several statments/notes in the accompanying 10g JDBC documentation that appear to directly contradict the statement above. For example, the following note:
Note:
Because the JDBC Thin driver can be used in applets that do not depend on an Oracle client installation, you cannot use a TNSNAMES entry to set up a Thin driver connection.
Does anybody know if the JDBC Thin driver supports connection via a TNSNAMES entry? If so, can you direct me to the documentation on how to use it.
FYI, I have managed to establish a connection using a TNS alias and JDBC-OCI as follows:
OracleDataSource ods = new OracleDataSource();
ods.setTNSEntryName("MyTNSAlias");
ods.setUser("scott");
ods.setPassword("tiger");
ods.setDriverType("oci8");
Connection conn = ods.getConnection();
However, if I set driver type to "thin" instead of "oci8", I get the following error:
Exception in thread "main" java.sql.SQLException: Io exception: SO Exception was generated
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:333)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:404)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:169)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:108)
at prototype.TNSTest.main(TNSTest.java:36)
Thanks in advance.

Hi,
I wrote the white paper in question and am in position to confirm that in 10.2, JDBC-Thin does indeed support tnsnames.ora; you need to specify the location (i.e., directory) of the tnsnames.ora file in the oracle.net.tns.admin system property
java -Doracle.net.tns_admin=$ORACLE_HOME/network/admini have working examples in my book.
I'll have it fixed in the online doc, our printed doc is sometimes out of sync.
Kuassi http://db360.blogspot.com

Update table which provide information about NAT feature support in Catalyst switches?

Hi,
I'm searching an update table which provide information about NAT feature support in Catalyst switches.
I would like to know if the Nexus 7000 support NAT but my table below is too old -> Updated: Apr 05, 2006.
From my research, it's not possible but i'm looking for an official documentation.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a008011c629.shtml
Thanks in advance
François

Hi,
No support of NAT on N7ks, see this posthttps://supportforums.cisco.com/thread/2045647
Your table is the latest one I know of so you'll have to look at the switches datasheets to really know but I highly doubt that newer switches not in the table support this feature.
Regards
Alain
Don't forget to rate helpful posts.

Are these features supported in CR4J SDK or Crystal Reports for Eclipse 2.0

1. Does this Java (Viewer) SDK supports export-report to Excel format feature?
2. Suppose the report has a list parameter; this parameter is associated to a connection/command; values for this parameter is grabbed as a result of a simple select query. Will the report, while opening for view, shows the parameter with drop-down values pulled from database? This means, before showing the report in the browser, report has to execute that select query stored in the report and populate this parameter list. We do not prefer to dynamically (programmatically) feed the parameter and its values into the report just before viewing.
3. Does the sort control feature supported in creation as well as viewing time, in this Java viewer SDK. (If the report is a simple column report, viewing user should be able to sort by any of the columns)
If any of this feature is not supported, please give me some suggestions on which version (free or paid) has these features.

1. It supports export to Excel(data-only) format.
2.Yes, this feature is present . To see demos please check this link
https://www.sdn.sap.com/irj/boc/crystalreports-java?rid=/webcontent/uuid/30e3a9b4-a7d3-2b10-678a-9ed48f648365 [original link is broken]
3. CR4E 2.0 SDK comes with CR 2008 features. But there are features which supports at Design time in a CR 2008 designer and which supports at Runtime in Eclipse 2.0 SDK.
to know more please check this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/301717ef-3ad3-2b10-5aad-8d9b73a6e365
Thanks,
Tej

Object Relational Features supported??

We want to hide our relational datamodel from our application by usage of object views. Our .Net applcation should communicate with the database just handling objects.
How well are object relational features supported in ODP.Net? Can object relational features be better exploited via oo4o? Is this a feasible solution at all?
Thanks for input,
Stephan

Ok. But as you know there are few thirdy party vendors that offer object-realtional mapping products for C#.Net applications. But all of them are not only for just one DB f.e:Oracle, but for many f.e;Oracle, SQL Server, Postgre SQL etc. BUt in my opinion it is not good solution for enterprise applications. Because if you plan to use Oracle DB, so your mapping tool must support most of Oracle features. F.e: mapping packages, using sequences.
Dear Mark William. Have you ever used such product regarding C#.Net Windows Forms and Oracle10G? Could you possibly give me advice about it? What can be achieved from applying mapping product instead of using only relational data at .NET dataset level?
I mean object-oriented application with relational data vs not object-oriented application with relational data.
Thanks in advance.

Does JDBC driver support encryption?

Does the JDBC driver support Oracle encryption?
Is there a particular version of the jdbc zip file that we need?
We're running on a Sequent, which does yet have the latest version of oracle- we're running Oracle 8.0.5.
Is it 40 bit or 128 bit encryption?

I have this sample code:
String Query = "ALTER USER ? IDENTIFIED BY ? QUOTA 0 ON SYSTEM QUOTA 0 ON TEMP";
PreparedStatement pstmt = conn.prepareStatement(Query);
pstmt.setString(1,"\"TESTVIPIN\"");
pstmt.setString(2,"\"abc123\"");
pstmt.executeUpdate();
Executing this, i get the same error. But if i try UPDATE statement, it is working fine. Is this problem with ORACLE JDBC driver (for ALTER USER...) or problem of code?
Thanks,
Vipin Koul

Optional package feature supported

Do you support the optional package features? If yes , how?

Hi Amol,
WebLogic jDriver for Oracle fully supports the JDBC 2.0 Optional Package API for
distributed transactions.
Laurent Goldsztejn
Developer Relations Engineer
BEA Support
"amol desai" <[email protected]> wrote:
>
Do you support the optional package features? If yes , how?

Sender JDBC Adapter Supports Stored Procedures????

Dear All,
I was trying to use the Sender JDBC adapter to call the Stored procedure in the Sender JDBC adapter is possible to do this???
I don't think Sender JDBC Adapter is supported to execute the Oracle Started Procedures. With my understanding only the Receiver JDBC Adapter will supported for the Stored Procedures using the message mapping Action = EXECUTE and Table = DBO.EmployeeMasterTable.
Please let me know how to achieve the below scenario.
My Scenario JDBC to RFC
Query SQL Statement:
select * from dbo.emp where flag = 'Insert' or flag = 'Update' or flag = 'Delete'
Update SQL Statement:
UPDATE dbo.emp SET flag = null WHERE flag IN ('Insert', 'Update');
DELETE dbo.emp WHERE flag = 'Delete';
In the my update statement I need to update few data flag with Insert , Update and need to delete the of the old records as mentioned above the query.
In the response mapping I am using the Action = INSERT and Table = emp.
Thanks,
Jane F.

Hi Jane,
>>My requirment is to select from the DB and update and delete needs to be done. How I need to call this stored procedure in Sender JDBC adapter.
An example of SP call is mentioned in the previous note Note 941317 - XI / PI JDBC Adapter: Known Problems / Incompatibilities
SP Code
          ---------- pkg1 ----------
CREATE PACKAGE pkg1 AS
TYPE numset_t IS TABLE OF NUMBER;
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED;
END pkg1;
CREATE PACKAGE BODY pkg1 AS
-- FUNCTION f1 returns a collection of elements (1,2,3,... x)
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED IS
BEGIN
    FOR i IN 1..x LOOP
      PIPE ROW(i);
    END LOOP;
    RETURN;
END;
END pkg1;
In sender channel mention
>> SELECT * FROM TABLE(pkg1.f1(5));
>>Is this need to be in the one stored procedure right. Can ou let me know how it should be handled in JDBC Adapter.
Yes it shoudl be a single SP. Mention a select statement as given in above example.
What is your Oracle version?
Regards
Suraj

Is Adobe Exchange feature supported on CS5.* ?

Hi!
I am developing a Flex panel for Photoshop CS5.* and 6 using Creative Suite Extension Builder 2. This version has a new feature called Adobe Exchange that allows extensions to be marketed and sold. As I understand, this feature is supported on CS6 only.
I have some queries regarding the approval guidelines of a zxp.
[Guideline 1] Content should not contain any URL or redirect links anywhere other than Producers Identity Box in Extension Manager.
[Ques] Does that mean we cannot have a url on our panel that directs the user to anywhere other than Producers Identity Box in Extension Manager?
[Guideline 2] Content does not contain encryption technology.
[Ques] Does this mean that our panel cannot in any way hold a code for encryption, be it for storing values like login credentials, etc.?
[Guideline 3] The product must support CS6 versions of Creative Suite applications. Products that support earlier versions are not accepted.
[Ques] Does this mean that a panel with support for CS5.* as well as CS6 will not be uploaded to Adobe Exchange?
Please shed some light on the above.
Thanks!

Hi there,
I have answered your questions inline below.
I am developing a Flex panel for Photoshop CS5.* and 6 using Creative Suite Extension Builder 2. This version has a new feature called Adobe Exchange that allows extensions to be marketed and sold. As I understand, this feature is supported on CS6 only.
[Answer]: Yes CS6 is required but you can have a product that is backwards compatible with products earlier than CS6 such as CS5. In other words if you already have a product that supports say CS4/CS5 and CS6 you would not need to strip anything out we just need to have CS6 compatibility in order to be supported on the new Adobe Exchange.
I have some queries regarding the approval guidelines of a zxp.
[Guideline 1] Content should not contain any URL or redirect links anywhere other than Producers Identity Box in Extension Manager.
[Ques] Does that mean we cannot have a url on our panel that directs the user to anywhere other than Producers Identity Box in Extension Manager?
[Answer]: What you can't do is point to another store or purchase page. So for example you could link to more information about your product but you could not provide a direct link to another Store/purchase option. As long as you do not have a direct link to another Store URL we are OK with it.
[Guideline 2] Content does not contain encryption technology.
[Ques] Does this mean that our panel cannot in any way hold a code for encryption, be it for storing values like login credentials, etc.?
[Answer]: The encryption question is really about encryptng or creating the possibility of encrypting. It comes back to the United States wanting to ensure we do not export somethign that could harm the United States, so for example a product that let's you encrypt secret information may cause issues for the US government. There are very few cases I can think of where this could be the case but we have to ask the question from a legal perspective. We expect some encryption for things like say a login and that should be OK but if you do have any concerns please say yes and we can investigate. 99% of the time it should not be an issue but we will work with producers to help you if you have any questions or concerns on this topic.
[Guideline 3] The product must support CS6 versions of Creative Suite applications. Products that support earlier versions are not accepted.
[Ques] Does this mean that a panel with support for CS5.* as well as CS6 will not be uploaded to Adobe Exchange?
[Answer]: No you can have backwards compatibility in your product, you just need to ensure your product will work with S6, if it works with earlier versions of
CS that's fine.
I hope the above helps.
Jonathan Ferman | Product Manager

Wanted: Complete list (chart) of iOS 4.1 feature support for 2G vs 3G Touch

I have 2G Touch, running iOS 4. Love it.
QUESTION: Is there an iOS 4.1 chart that lists specific features available for 2G vs. 3G hardware?
CONTEXT:
(A) I already scoured this page:
http://www.apple.com/ipodtouch/software-update/
...and was unsatisfied by this ambiguous disclaimer:
"Not all features are compatible with all devices. For example, multitasking, custom wallpaper, and Bluetooth keyboard support are available only with iPhone 4, iPhone 3GS, and the third- and fourth-generation iPod touch (all models from late 2010 and 32GB and 64GB models from late 2009)."
(B) So, I searched apple.com's support/forums for an updated version of this WONDERFUL compatability chart:
"_iPod touch: Which iOS 4 software features does my iPod touch support?_"
http://support.apple.com/kb/HT4205
Last Modified: June 24, 2010
Article: HT4205
*_MY DREAM_ is for article HT4205 to be updated, by someone, somewhere!*
Thanks in advance.

Can anyone else verify that this information remains unavailable?
Have any independent blogs/sites created a tentative (speculative) chart/table with the information I requested?
Thank you

Photoshop CS3's new features supported by Aperture?

hi:
i'm intrigued by some of the new features in Photoshop CS3 such as the non-destructive filters. i'm wondering how Aperture treats these new types of layers or filters when using CS3 as an external editor. i don't have CS2, so i don't think i was eligible for the beta download (and didn't have much time to play with it anyway).
just wondering what others have thought that might have played with these features in the beta?
thanks,
scott
PowerMac G5 2.5GHz Mac OS X (10.4.8) MacBook Pro 2.0GHz

I took a DNG file from my M8 and opened it as a 'smart object' in PS-CS3. I then applied several adjustment layers and smart filters before saving the file out as as a PSD file.
Aperture then imported the PSD file with no trouble and allowed me to make adjustments using Aperture's adjustment panes. Finally I exported the image as a JPEG and opened that JPEG in my browser and Preview application. No problems.
The only think that Aperture wouldn't do was import the Leica M8 file directly. This would be a good time for someone to repeat the tired line that Aperture won't open DNG files because they can't support a proprietary file standard that is controlled by on outside company. DNG = PDF = PSD in this regard. Only one of these isn't supported fully as far as I can tell.

JDBC features supported

Similar Messages

Maybe you are looking for