JDBC retrying the query after every 5 mins.

Hi,
I am facing one problem. I am running a hugequery from the application. If it gets timed out then weblogic tries the same query again after 5 Minutes. I haven't set any property.Is there any default propety that needs to be set.
Please Help
Thanks in advance
Himanshu

Himanshu Khanna wrote:
I am using a servlet which calls a delegate which inturns call a session bean which calls a DAO. And there is no such transaction attribute defined.
It does not happen everytime but sometime it happens. Not sure why is it happening is there any thing in DataSource or Connection pool that i need to set.
HimanshuHi. This is odd. I can't imagine any part of weblogic that would
retry a user query. What I suggest for an experiment is to turn on
JDBC logging, and then when it seems like the query is being
retried, reset and disable the connection pool, and then wait
for the repeat, and show us any exception that is logged at the
WLS server.
Joe

Similar Messages

My ipad atomatically gets switched off after every 5 mins

From first day only my ipad atomatically gets switched off after every 5 mins and then atomatically gets on after 2-3 mins. is it a hardware problem or some problem in settings? if anybody knows the solution then please let me know....

Is this a brand new iPad2. Did you notice this occurring before you started adding apps? Is this is occurring if you do not have any apps you have started running either active or in the background?
If you have already tried powering off the device, you can try to do a hard reset (Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, ignore the red slider, let go of the buttons.) and see how it runs without starting any apps.
I do not have instructions for doing a restore but that is the only other step that I think of that you can take to resolve a software based problem.
If you are still seeing the behavior after trying most or all of the above, I would suggest taking it in or returning it for service.

Users VPN drops after every 5 mins

Hi everyone,
We have user whose remote VPN drops after every 5 mins.
Need to know whats things i can check to troubleshoot the issue?
User connects by RSA Token.
ISP connection is ok its not issue.
Any thing i can check in ASA ?
Thanks
Mahesh

On the client side, have you tested wired vs wireless to see if the problems exists in both? If it's only one of them but not the other, try updating the drivers. Also, if it's windows 7, take a look at the power settings in control panel. I've seen where agressive power settings will shut off the network port when idle. Not that big of a deal in a LAN environment but it wreaks havoc on VPN.

Can't work with the Query after I save a 3.5 Query in 7.0 Query Designer

Hello,
my Problem is, I open a 3.5 Query in a 7.0 Query Designer. Then I save as another name. When i Open the Query
i can't change things... WHY ? A Standart Transport is OK in RSA1, Transport, BexTransport. all ok..
can't work with the Query after I save a 3.5 Query in 7.0 Query Designer
Best Regadrs

Hi,
I cant click on it. It is grey..
I open the 3.x Query in a 7.0 Query Designer and save as another name.. Then I try to open it with the 7.0 tool. The Query is displayed. But I cant change something...
thnx

Whenever I access my Hotmail inbox to open a new mail it starts reloading the mail after every second unless i switch it to full view?

whenever I access my Hotmail inbox to open a new mail it starts reloading the mail after every second unless i switch it to full view. Kindly help me to solve this continuous problem.

I confirm this is a known bug and Microsoft are working on a fix. They plan to fix this before Firefox 4 reaches release candidate phase.
A workaround is to change a preference in Firefox:
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''html5.enable''' and double-click on it to change its value to '''false'''
If you do this, remember to set the preference back to true by double-clicking on it again when Firefox 4 release candidate is made available, the bug should be fixed by then.

8 fonts in the trash after every restart!

Hi.
Snow Leopard 10.6.1 is working great but I am finding 8 fonts in the trash after every restart!
ArialHB, Corsiva, Nadeem, NewPeninimMTBoldInclined, Baghdad, MshtakanRegular, NewPeninimMT, NewPeninimMTInclined.
This can't be good. Does anybody know what that means and what to do?
I see a lot of people have font-problems.
W.W.

Your choice - Back them up to CD-R if you've a mind, but I'd pull the trigger, finish them off and get rid of them. They've ended up there for a reason.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come in from MS Office 2008, including fonts related to an Equation Editor installation.
Good luck going forward.

My wifi loses connection to my phone and laptop at the same time every 30 mins or so.

Hey all.
I have a WRT160 V2 router with firmware v2.0.02. I have had the router for years without any problems. A few months ago I have started to see an issue where I lose connection to my internet on my laptop, and wifi on my phone at the same time. I have wifi calling on my phone and it disconnects also at the same time. All of a sudden, everything will stop working, then about 40 seconds later, it all works again. I lost the connection maybe every 30 to 60 mins
Does anyone have an idea what can be causing this issue? Thank you.
It is really annoying because I rely on wifi calling for my primary phone, and I end up getting cut off when talking to people. BTW wifi calling is for all tmobile phones, but also normal wifi to surf the web on my laptop and phone drops too at the same time.

I would suggest that you isolate the problem. You may start the isolation by connecting a computer directly to the router (hard wired connection). Observe the connection for couple of hours. If the connection is stable, problem might be on the wireless settings of the rotuer. If the connection is not stable, do further isolation. Connect the computer directly to your modem. Observe the connection for couple of hours. If the connection is not stable, call your internet service provider. If the connection is stable, problem might be on the router itself. Upgrade the firmware first (firmware available in the website: Ver.2.0.03 Build 9). After the upgrade, reset and reconfigure your router.

Error executing the Query after deploying and executing the application in WLS 6.1 SP3

Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.

Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic

Unable to execute the query after transpoting to Quality in BI7.0

Hi Friends,
We are facing problem while executing the query in BI 7.0 after transporting to Quality system.
Whenever we are clicking on the query in Analyser after transporting to quality, it is throwing an error like "Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION" and " system error in program SAPLRRI2 and form DIM_FAC_SRDATE-02" and it is disconnecting from BI system.
The transport went successfully to quality system.
Please do the needful regarding the above errors.
Thanks
Rama

Hello,
I resolved the problem. I removed all the variables in the query did another "Query Check" and the error message was clearer.
There were missing infobjects in the Multi-Provider. When I fixed this the error was gone.
Thanks.

Machine hangs after every 30 min

I have lonovo notebook,and am facing strange problem. the keyboard ,tap pad and pointer becomes unresponsive after every 30 minutes and i have to restart it to start work again. Also, it takes more than 5 minutes to start.
I called the lenovo the support people, but the support guy was extemely rude and un-coperative and thrice cut the communication without any reason, any help, and information. Twice he hanged the phone telling that my warrenty period is expired. ( i have purchased it just before just 6 months).
I dont know now what to do, as am tired of the machine's hangs and restarts.
and am too much unhappy with the kind of after-sales support division of lenovo. Its very frustrating and i would never recommand anybody to buy lenovo.

Keep Activity Monitor open (or some other monitoring utility) and see what happens to your free memory while you're working in FCP. If it is all being depleted you may want to get an app that frees up memory. I can't recommend one because I just use Terminal and find does an OK job. However, there have been several threads about this where users have recommended specific apps. They should be findable with a search.
Russ

To execute the query after getting connected to db from a unix shell script

How the variable "output" can be used in the sql query after getting connected to database.
Code:
#!/bin/bash
sort shipments | uniq > test1.txt
sed "s/.*/'TESCO.&',/;$ s/,//" test1.txt | paste -s -d '' > output
sqlplus glo/glo@tcot
select * from xx where column_name in ($output)
In this case, am getting connected to database, but cursor is waiting at sql prompt, with out executing the above select query.
Please help.

Try something like:
#!/bin/bash
sort shipments | uniq > test1.txt
sed "s/.*/'TESCO.&',/;$ s/,//" test1.txt | paste -s -d '' > output
sqlplus glo/glo@tcot << EOF
WHENEVER SQLERROR EXIT 1;
WHENEVER OSERROR EXIT 1;
set serveroutput on
declare
v_data varchar2(100) := NULL;
BEGIN
select col_name into v_Data from xx where column_name in ('$output')
and rownum < 2;
dbms_output.put_line(v_Data);
end;
exit
EOF

How to get the count for every 30 mins

Hi,
Following is the table format:
Time ******************** logged in users
9/5/2006 8:38:22 PM**** 2
9/5/2006 8:38:44 PM**** 4
9/5/2006 8:40:22 PM**** 1
9/5/2006 8:41:22 PM**** 3
9/5/2006 8:52:22 PM**** 6
9/5/2006 9:02:22 PM**** 5
9/5/2006 9:04:24 PM**** 3
9/5/2006 9:08:26 PM**** 4
9/5/2006 9:10:28 PM**** 6
What I need is number of users logged in for every 30 min
like 9/5/2006 9:00:00(8:30 to 9:00) is 16
9/5/2006 9:30:00(9:00 to 9:30) is 18
Can any one help me in this regard?
-Raj

The trick is to group your times to every 30 min.
Unfortunatly there is no way to TRUNC(30 min).
But you can build this function yourself using some mathematical logic and trunc to build the groups.
Look at this code piece:
select trunc(sysdate) + trunc((sysdate - trunc(sysdate))*24*2)/24/2
from dualInstead of sysdate use your date column and group by the expression.
Added example using Dave's test data
WITH t AS
        SELECT TO_DATE ('9/5/2006 8:38:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               2 num
          FROM DUAL
        UNION
        SELECT TO_DATE ('9/5/2006 8:38:44 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               4 num
          FROM DUAL
        UNION
        SELECT TO_DATE ('9/5/2006 8:40:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               1 num
          FROM DUAL
        UNION
        SELECT TO_DATE ('9/5/2006 8:41:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               3 num
          FROM DUAL
        UNION
        SELECT TO_DATE ('9/5/2006 8:52:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               6 num
          FROM DUAL
        UNION
        SELECT TO_DATE ('9/5/2006 9:02:22 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               5 num
          FROM DUAL
        UNION
        SELECT TO_DATE ('9/5/2006 9:04:24 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               3 num
          FROM DUAL
        UNION
        SELECT TO_DATE ('9/5/2006 9:08:26 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               4 num
          FROM DUAL
        UNION
        SELECT TO_DATE ('9/5/2006 9:10:28 PM', 'fmdd/mm/yyyy hh:mi:ss pm') tm,
               6 num
          FROM DUAL)
SELECT   SUM (num), trunc(tm) + trunc((tm - trunc(tm))*24*2)/24/2 halfhours
    FROM t
GROUP BY trunc(tm) + trunc((tm - trunc(tm))*24*2)/24/2;
Row#     SUM(NUM)     HALFHOURS
1     16     09.05.2006 20:30:00
2     18     09.05.2006 21:00:00Message was edited by:
Sven Weller

Who hears the audible annoying 'pop' out the left side every 5 min or so?

This is making me bonkers, since it is becoming predictible popping.
This is my 2nd unit with the same fan noise, although 3db quieter than the original which also had this popping every 4-6 minutes, but much more pronounced.
Can anyone else report this 'phenomenom' on their 20" unit also? The 17" iSight models seem a different breed and are quieter (volume of cooling box).
I have heard others with silent fan(s) and no pops, so I know it is achievable. A friend just purchased 2 of these at my suggestion, and I am envious of how quiet and popless and flawless both of his are performing.
Please spend the time to reply.
Thank you !
iMac iSight 20" - October 2005 Mac OS X (10.4.3)

No popping here with my 20" iMac (iSight). My unit is very quiet, with only faint fan noise (which is expected) audible upon close range listening. I had a mini, and although the iMac isn't that quiet, it's the quietest computer with some power I've ever owned.
Bryan

How do you stop the "alignment" after every print job?

We got this printer because at first received great reviews, it had a fax, copier and printer. However, as discussed in another forum, we are wasting color ink when we print in black/white. I just installed a magenta and already it has lost 1/4 of the ink for "aligning". Is it set up in the programming to align after print job? I"m so over this! I have to hit cancel then wait 4 min for it to cancel. I have algined and everything is ok, not sure why after each print job. I followed "HPs guidelines" on the program but there is nothing there to address this issue. Any help or thought would be greatly appreciated!
Thanks!

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HT1349 The new os make the ipad reset every 30 mins, please take this in consideration

Reset product,
The new os is good, but after 30 to 40 mins is shutdown the ipad n reset itself

You may want to backup and setup as new.
Settings>General>Reset>Erase all contents and settings

JDBC retrying the query after every 5 mins.

Similar Messages

Maybe you are looking for