Step "Start" is not connected properly in Visio

Hi All,
  I have designed a workflow with 4 steps like start. process, approve, stop via DM. I am getting the following error while saving the workflow design
  : Step start is not connected properly. I could not save the wrkflow design.
Here am giving the start step properties :
Name : Start
Check Out records : No
Duration Timeout : 1 wk
Cc: Notification  :  [owner]
Send Next step  : [Anyone]
Split Job            : [Anyone].
I have checked in the DM by selecting the record in the main table and righ clicking on that workflows->Add to job is also disabled.
I have checked the same by closing visio but still "Add to job" is grayed out.
Can anybody guide in the visio why am unable to save the
workflow design and Add to job is disabled?
Please help me out...
Thanks & Regards
Sireesha.

Hi,
Problem 1
Please check if the start step of the workflow is properly connected to the next step.Connect it properly and save.
Problem 2
Add to job is disabled
to resolve this problem go to workflow table in data manager select your workflow name in Records pane then go to Record Detail and check if the Active ="Yes" if not then assign Active="Yes".This will surely solve your problem.
Reward if helpful.
Regards,
Vinay Yadav
Edited by: Vinay Yadav on May 28, 2008 7:42 AM
Edited by: Vinay Yadav on May 28, 2008 7:48 AM

Similar Messages

  • HT1386 My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

    My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

    You need to update to 10.6.8 using Software Update.

  • Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

    Why does not connect properly macpro my motorola bluetooth headphones S10?     I get a connection error message and there is no sound.                         (I want to use headphones to listen to music via bluetooth from my macpro)   
    the s10 works perfectly on my ipod touch 4g. 

    this is   
    ERROR HAS OCCURRED Bluetooth audio.
    It failed to establish connection with their
    audio device. make sure it is on and
    in the range. you may need to restart the
      audio section of the program you were using
    STOP USING THE HEADSET WITH MICROPHONE.
    ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

  • PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER

    I recently purchased a time capsule to use in conjunction with my mac. When I am prompted to connect the ethernet cable from the lan port on my fios router to the wan port on the tc, the cable will not connect properly to the lan port on the tc. If I connect it from the lan on the fios router to the lan on the tc the green indicator lights up to indicate a connection but this does not help the wan port situation. I am able to locate the network I created from my mac but this tc network is not connected to the internet as indicated by the amber blinking light on the front of the tc. Also since creating this non working tc network, my fios signal is almost non existant! I am new to all of this so any help at all would be greatly appreciated!!!

    Don't worry about the cable. For now.
    Set the TC to bridge mode.. In bridge there is no wan port.. so you can use any port on the TC.
    Test with the TC plugged in FIOS.. use in turn all the ports to see if it will work.
    Do not change any setting but bridge the TC from default.. ie do not set extend wireless.. that will totally foul it up. Do not use join wireless, that will triple foul it up. Absolute default.. set TC to bridge... plug into the FIOS.. ethernet to any port that the light goes on.
    Do a snapshot of the TC setup from airport utility and post.

  • Java Script Code not working properly for visios in sharepoint 2013

    Hi all ,
                 I have few visios and I am using the visio web part to display and to redirect from one visio to other visio I am using the java script code through content editor web part . 
    In share point 2010 it's working fine , I was able to redirect to all the visios and code is working fine .
    In share point 2013 its not the same , Its not working properly . only for the first time the code is working fine . once it goes to next visio the code stops working . 
    For example if i click in visio A it gets redirect to Visio B and its stops working , it wont allow to do any other steps . 
    I have checked with the URL its correct , I am not able to find any error also .
    Indresh

    This will be likely caused by the Minimal Download Strategy not registering the Javascript on the page reload. You can turn off the MDS feature to test this.
    You can either turn off MDS in your site, or register your Javascript functions with MDS to ensure they are called. To do this, you'll need all of your code to be wrapped in a javascript file (Embed this on the page using a <script> tag and
    inside that file in a function, which you then register with MDS as follows (I usually do this in the first line of the javascript file):-
    RegisterModuleInit("/SiteAssets/YourJavaScriptFile.js", NameOfYourFunction);
    Regards
    Paul.
    Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

  • Skype Not Connecting Properly

    Starting today Skype refuses to connect. (it works fine on Windows, and the password wasn't changed). It just shows the connecting icon, and nothing happens.
    Connects properly after around 5 minutes.
    Last edited by *vitali* (2012-03-11 04:51:52)

    I guess I am kind of glad someone else is having this problem more recently. I think it is tied to a recent update that Skype did. My in bound number stopped working right 2 weeks ago. They managed to fix some of it, so I do get calls now from Verizon and land lines - most land lines. I cannot get a call from a T-Mobile phone to save my soul.
    It rings, and when I go to pick it up - it just disconnects in one second.
    The party calling doesn't even hear it ring. 
    Many of them just give up and hang up.
    It does also NOT forward nor offer voice mail
    And it is not my settings - almost every other caller works just fine.
    And I have the problem on multiple computers, multiple gadgets, android, ios, etc.
    Skype support - help us out here.
    Remember, we're all in this together, and I'm pulling for you.

  • Passport HD not connecting properly to Laptop

    I have a passport portable hard drive, which was working fine. Today I connected it to my laptop, the blue power light came on, but it did not register properly in my computer. I didn't hear the normal prompts I usually do either when USB devices are connected to the laptop. It is drawing power because the power light comes on, but the computer does not seem to be able to read it. What can I do to access the hard drive? I tried reconnecting a few times and even used a different computer, with no success. Any advice or help would be appreciated, thanks.

    I have a potential solution, but first need to ask what your level of computer knowledge is, as it's not "hard" but you could mess something up if you do it wrong.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • I have a brand new Mac Pro Tower that continually kicks me off the internet and sometimes starts up not connecting to the internet?

    My brand new Mac Pro Tower that I spent a small fortune on sometimes boots up and does not connect to the internet when every other computer in my office does and other times it just kicks me straight off. My question is, is there a problem with the wi fi on these machines?

    Brand new nMP Mac Pro 6,1 Late 2013.... and it is defective - the older silver tower might be easier to find parts but at least it is not 65 lbs and is something that can be taken in - which I think you really need to do.
    When you run etrecheck from www.etresoft.com it can show what is installed, drivers and might help point to something on software side.
    Grant is the go-to person here I think among others for networking issues.
    Airport Express and signal strength, channel it is trying to use, whether the Network control panel settings are "correct" or need to be changed (even the order, what it is trying to look for and use).
    If you move it to another spot or put another computer over in that general vicinity...? behaves the same.
    I recall reading where the MacBook Pro model in 2012? and switched to a new chipset and some very long (huge) threads in their forum - which means also there was no real solution given.
    No, should not be. And other than network tests would be booting into Apple DiagnosticsTest mode - pulls down from Apple servers.
    http://support.apple.com/kb/HT5781

  • WRT54G not connecting properly with Netgear switch

    I have a WRT54Gv4 which I've been using as both a WAP and a wired switch. I now have too many wired devices to plug into the built-in switch, so I tried to expand the WRT54G using a Netgear FS108 8-port switch. The WRT54G and the FS108 both work perfectly well when not connected to each other, but all hell breaks loose as soon as I plug them together. If I plug the cable into a regular port on the FS108, then the "network activity" light on the corresponding WRT54G port blinks rapidly and continuously. If I plug the cable into the uplink port on the FS108, then the "network activity" light on the FS108 port blinks rapidly and continuously. I get around 50% packet loss trying to communicate between a computer plugged into the WRT54G and another computer plugged into the FS108. I've already tried 3 different cables between the WRT54G and the FS108, and all have exhibited the same problem. I have also tried all kinds of power cycling of the different devices, and nothing I have done has worked.
    So I have two questions:
    1) Has anyone successfully connected a Netgear FS108 to a WRT54G? If so, how did you do it?
    2) Has anyone successfully used a Linksys SD208 or EZXS88W switch with a WRT54G? I'm going to buy one of these to replace the FS108 if nobody can answer the first question.
    Thanks.
    Message Edited by stharward on 06-09-2008 07:48 AM

    If you have McAfee anti-virus, then I guarantee IT IS a McAfee + Vista issue. In the Firewall settings for Vista, enable Peer-to-Peer and add and enable ports TCP 5357, TCP 5358, UDP 3702, TCP 2869, UDP 1900, UDP 137, UDP 138, TCP 139, TCP 445. THEN, disable Vista Firewall and enable McAfee Firewall. Click on Internet & Network Protection and then Configure. This is where the McAfee Firewall protection is enabled. Click on the Advanced tab. Click on Grant Full Access and apply. Click OK, close out and reboot. Your system will utilize the McAfee Firewall and not the Microsoft one, and as long as you have WAP encryption and a private network, your Linksys router will allow printer and file sharing and be protected.

  • Nokia N70 and Pc Suite 6.6 not connecting properly

    I am having problems connecting to my phone from windows xp and pc suite.
    Whenever i try to "backup" or use "file manager" i get connection errors. Nokia connection manager is showing connected ok. When i click 'file manager' i can see the N70, but as soon as i try to 'explore' it by double clicking i get an error similar to 'Operation could not be completed'. (sorry not at home at the mo, experiencing parity error in my organic memory! ;-p)
    History:
    I Previously had Pc suite 5 installed and connected via bluetooth to my Nokia 6600. I believe the problem is the old PC Suite software as I can connect on a works laptop but not from my home pc. I have removed all previous Bluetooth, Nokia software via add-remove programs but still no luck.
    I have tried renaming my memory card and even re-formatting and renaming, no luck.
    System Details:
    Windows XP SP1
    PC Suite 6.6 Rev 18
    Nokia N70
    CA-43 usb cable
    v2.0539.1.2 19-10-05 RM-84
    Can anyone help? I really don't want to uninstall and re-install windows if i can help it!

    sorry, i thought i was replying to a different thread i had allreayd posted my problem in, whihc is...
    I had the firmware updated on my N70 today to get rid of the dreaded orange home screen at a nokia dealer, but when I try to connect to my PC it won’t work.
    When I first got home and plugged it in via USB windows first told me the USB device was not reqocnised, so I pulled out the cable and put it in as advised. it seemed to be ok then, but just after i went to transfer some music over but it wouldn’t let me (as if my phone was not connected) and PC suit said I didnt have a phone connected, although I could see my phone under 'my computer' but couldn’t transfer any thing over.
    So I downloaded PC suite again to make sure I had up to date software and drivers, I already had them it seemed but I unistalled and install them again just in case. But when I come to set up the connection the set up screen simply hangs, although the cable is working as windows makes that noise and it pops up to say N70 found, but then a second later says the install didn’t work, all the time the setup screen still hangs in the background.
    I have tried every thing in this thread and others including doing the clean setup from nokia.
    My firmware version: 3.0546.2.3.18-11-05RM-84
    Windows XP SP2
    Please help.
    Thanks

  • My iPhone 3Gs, after update to iOs 5.1, will not connect properly to the Alpine Bluetooth.

    Now My iPhone will send only phonebook via Bluetooth, but not dialed calls or missed calls. Please help me!

    touch me wrote:
    it says ICCID: unknown
    Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • IChat not connecting properly or reliably to AIM

    hi there folks
    i've read with interest the various problems other people are having with this and the suggestions that have been offered. so far, nothing has improved my situation. here are some relevant details:
    - iChat will not reliably logon to AIM, though when this happens Bonjour works fine. when I try to log on, i often just see my buddy list grey-ed out - eventually my online buddies will show up at the top (as they should) but then quite often the next listed symptom will occur.
    - if/when iChat has logged in successfully, it will often crash silently in the background. the symptom here is that any outgoing messages do not appear in the iChat window and subsequent messages are ignored by iChat, but when the application is logged off i get the return messages, meaning that my first message IS getting through though iChat is not showing that it did, and I do not see the responses until i log off.
    - the only thing that seems to have worked to mitigate all this is waiting some period of time (not predictable - could be 5 minutes, could be an hour) before trying to log back on again. occasionally rebooting the mac will work, but this may be related to the time factor.
    - this scenario happens on multiple computers in multiple locations (even in other countries), using different routers. my desktop at home is a mac mini PPC running X.4.10 connected via ethernet to a linksys router. my desktop here at work is the G5 listed below, connected via ethernet to an Airport Extreme base station. my laptop is a macBook core2duo 2.0 mhz, running X.4.10 and connecting wirelessly, and exhibits these symptoms at both locations with both routers.
    all computers were updated to their current OS status using combo updaters.
    if I run AIM 4.7 on the work desktop, it connects with no problem, so it doesn't seem to be an account-related issue with AIM. the fact that the identical problems exist across different machines running different OS versions and with different routers in different locations leaves me scratching my head.......
    any insights into how to solve this would be most appreciated. any additional information needed will be gladly provided.
    best regards,
    hiltonius

    ok, just in the interest of completeness.....
    i believe i have solved the problem today, and thought i'd share my experience in case someone else can benefit from it.
    in pursuit of another way of using iChat, I was introduced to "jabber" and started configuring new accounts on my home desktop and my laptop to access AIM, Yahoo, and MSN all through jabber. got all that working fine.
    in the process of creating new accounts in iChat, the prefs file gets re-written - and I believe this cured the previous problem I was trying to address in the first place! at least so far today, the connection has not wavered, and so i'm optimistic that it'll continue to work.
    the tricky thing is that I sync these computers together using mark/space "sync together" software, so I believe it's likely that this problem originated on the studio DAW, was transferred through a sync I did there a while back, and manifested itself on all the computers when I upgraded to X.4.10. as I almost never run iChat on the DAW at work, I would not have noticed the bug there before it transferred to the computers on which I do run iChat - and then at that point, i checked it on the studio DAW and noticed it there too.
    so if there's a moral - when the feces flies off the proverbial fan, sometimes it's a good idea to just create a new iChat account and then even delete it if you want, just to re-write the prefs and keep everything smooth.
    any alternate theories, realities, or visions of peace are most welcome.
    best regards,
    Rich

  • ITunes will only display special characters/foreign languages when it is started while not connected to the internet

    This problem started right after upgrading to iTunes 10.5.
    I opened iTunes and all of the songs with special characters, japanese text, etc. showed up as boxes (the fallback unicode rectangle or whatever the proper name is). The result is that I have a ton of songs that just look like this - [][][][][][][][]
    The only thing I have found to fix it is if I disconnect the internet, restart the computer, open itunes and then I can reconnect the internet. When I open itunes while not online, the song titles all go back to normal.
    I can't figure out why being online makes any difference. Yes, I have the correct language packs installed and the characters display correctly in all programs besides itunes.
    Thanks for any help. Let me know if there is any additional info you need.

    I don't have the bit-rot or router issue, but I'm frequently experiencing dropped connections with my ISP (a satellite service). Disabling / reabling the Ethernet port, or closing my laptop lid for a few seconds, usually fixes the problem, abiet temporarily.
    I've noticed during these dropped connections that over 90% of the time, the ethernet port continues to show as active and with a valid IP. The problem seems to have something to do with OS X requesting a new IP when it already has one. The longer I'm online, the more frequently this happens.
    I've installed Apples Broadband Tuner, and am going through my providers Web proxy.
    However, when I VPN into work with the companies PC laptop, the connection seldom drops and is likely due to VPN server overload, which leads me to believe this is an OS X thing.
    Thanks for your help.
    BTW, I removed my router because, even though the setting were correct and both laptops where getting an IP, the MAC dropped more frequently, and I had a much harder time getting a VPN connection on the PC.

  • "ThinkVant​age Tools" Jump List in Start Menu not working properly

    Hello All:
    I have a very new (3 days old) W520, model number 4270 CTO.  This product arrived with many unique and useful ThinkVantage Tools installed.
    For reasons I cannot comprehend, the jump list attached to the "ThinkVantage Tools" entry in the start menu (the frequently used items portion of the start menu) is not opening up to show all of the various ThinkVantage Tools that are available, instead; it is opening up to show what appears to be 'recent places' I have visited using the OS (in other words, kind of like the Windows 7 'recent places' shortcut'.
    Can anyone provide me with a suggestion about how to solve this problem, and get the jump list to display the various subsidiary tools, rather than the recent places I have been to with Windows Explorer?  Photo showing the problem is below.
    Michael
    Notice the problem with the subsidiary jump list...

    Serge:
    I need a little bit of help figuring out exactly what to remove, and where to go to get the replacement application to re-install.
    I took a look at the various Lenovo applications listed in the "Programs and Features" control panel, and all of them appear to be specific tasks (for example, Power Manager, Access Connections, Active Protection, etc.).  There does not appear to be an entry on that list for "Lenovo ThinkVantage Tools".
    I also took a closer look at what the entry in the start menu (pictured above) references.  When I examine the Properties for this entry, it shows the following reference: "C:\Windows\explorer.exe ::{26EE0668-A00A-44D7-9371-BEB064C98683}\2\::{A8A9​1A66-3A7D-4424-8D24-04E180695C7A}\Provider%5CMicro​soft.Base.DeviceDisplayObjects//DDO:%7B00000000-00​00-0000-FFFF-FFFFFFFFFFFF%7D\cat{8AA6B0C2-14A6-4da​8-BF36-F7D93ACE9ACE}".
    Selecting the 'Open File Location' button from the Properties sheet refers me to the explorer.exe application that is contained in the 'C:\Windows' folder.
    I would be very grateful if you would tell me exactly how to remove and reinstall this item - in particular, where should I go to find the installer package to reinstall it?  I have looked at the W520 Device Driver File Matrix, under the 'ThinkVantage Technologies' heading, and can't find any entry that explicitly says "Lenovo ThinkVantage Tools".
    Thanks again for your help.
    Michael
    W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

  • Canon EOS 1d MkII will not connect properly

    I am running an up to date version (1.1.1) but all that happens is that the camera keeps connenting and disconnecting literally every second. Does anyone else have this problem or know how to solve it? My camera is running on AC power so that is not the problem. Will this software ever work properly??

    I shoot with 1Ds Mark II's. The camera USB port is for direct printing (not downloading) and the digital/firewire port is for shooting tethered or downloading.
    You should make sure that you have the latest Canon Software, DPP v2.1.1, and EOS Utility.
    When you are connected be sure not to turn on the camera's display since that will cut off the connection with a computer temporarily.
    I do use the fw cable to shoot tethered to DPP with my cameras. I've never used it to download direct from the camera. Myself and most pro's I know use card readers which tend to be faster. I can confirm that a 1Ds Mark II CF card in a card reader shows up with no problem in Aperture.
    Apple has a help document on this that is very accurate:
    http://docs.info.apple.com/article.html?artnum=303189
    It recommends a card reader and if you read the last couple of lines it sounds like downloading from the camera is not necessarily supported with all models.

Maybe you are looking for