JDE One World Purchase Order Question
Hello,
I'm not sure I'm in the correct forum, so my apologies up front if I'm in the wrong place. If you know where this should be posted please let me know.
I'm working in JDE One World under purchasing (3rd party) dealing with purchase orders.
I'm trying to do a change order, and I need to change the currency from GBP to EUR for an order, but don't seem to be able to access the currency in my header. Is there a way to do this, or do I have to make a new order with the correct currency.
Thanks in advance,
Kath
Hi RAFDECC,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.
Similar Messages
-
Basic things needed to connect JDE One World XE B7333 SP17 to XI?
Hello....
Can anyone tell me the basic things needed to connect JDE One World XE B7333 SP17 to XI?
Hve anyone done this scenario before?
--Pramod.Hi Pramod
I have not worked on any scenario between JD Edwards and XI, but SAP has a list of adapters provided by iWay software, one of which is used to connect to JDE One World XE. The good thing about this adapter is that, you do not require a separate runtime.
You can get more info about the adapter from SAP Market place under,
SAP Exchange Infrastructure --> SAP XI in Detail --> Connectivity --> Connectivity SAP XI 3.0 --> iWay.
hope it helps
Sameer -
One step purchase order approval
Hi,
I have activated the one step PO approval workflow. How do I assign the agents. I have tried to do it in SPRO - Maintain agent assignemnet for tasks but was unable to do it as I did not get the link.
Any help is appreciated.
Joe VellaiparambilHi
<b>In the SRM transaction OOCU, use path / link
SRM --> SRM-EBP --> SRM-EBP-WFL then you will find agent assignment tab.</b>
<u>Please refer to these links as well.</u>
<b>one step approval
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/ee/277e3c281f1817e10000000a114084/frameset.htm
PO: 1 step approval - agent assignment
how to start one-step workflow..
Re: how to start one-step workflow..
Workflow without approval not working
Workflow configuration step by step guide...
Re: WS14000145 Approval N-Step for PO skips others approvers
One step purchase order approval
<i>Also try this...</i>
<u>Suggest you to go through the documentation before actually doing it at least once.
Please check this link:
https://websmp208.sap-ag.de/ibc-srm
You will find scenario specific config guides for EBP40. Download the config guide for self-service procurement and gothrough workflow configuration section. This is still the same in SRM50 also.</u>
Regards
- Atul -
JDE 8.10 Purchase Order Planning Message (R34A870)
Hi,
We have a JDE 8.10 customer currently implementing ASCP. When purchase orders are released from ASCP, can the JDE inbound process update existing purchase orders in JDE when there is qty/date change? Can it also handle cancellations? If updates and cancellations can be done, what attributes need to be setup in JDE for that? When we run the inbound processor now, only new purchase orders are being created without any updates to existing ones.
Thanks,
VenkatHI Venkat
I have feeling that your integration with E1 to ASCP is through VP (Value Chain Planning). I would ask if you can open a service requestion with the supply chain planning group and we can further look into this issue.'
Thanks
Deven. -
One step purchase order approval - Trigger only in certain cases.
Hi,
I want to trigger the one step workflow approval for Purchase Orders only in ceraitn cases.
When the PO is created from a shopping cart it has to be automatically approved. In other cases the workflow has to be triggerred.
I tried setting the no_further_approval flag to 'X' in the Approval BADI but did not work.
Any Suggestions?
Does the BADI BBP_WFL_APPROV_BADI work for one step approval or is it only for the n step?
Is it better to manipulate the start conditions?
Any help is appreciated.
Joe VellaiparambilHi
If the workflow is not working as expected, refer to SAP Note 322526, Analysis for workflow problems.
You should go with making the start conditions work, as you are aware that only 1 level Approval is required. Try making changes in the start conditions by using transaction - SWB_PROCUREMENT.
Note ->This BADI - BBP_WFL_APPROV_BADI is only recommended for N-step dynamic approval workflow. I don't think you need this BADI as the first alternative.
<u>Refer to few links as well.</u>
http://help.sap.com/saphelp_srm50/helpdata/en/ee/277e3c281f1817e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/0e/bc7d3c6715c854e10000000a11402f/content.htm
Regards
- Atul -
BAPI to modify items and create new ones in Purchase Order
Hi, everybody!
We need to change purchase orders (PO's) using a BAPI.
We need not only to modify and delete the existing items in a PO, but also create new
items in the same PO. Is it possible to do that using the bapi called BAPI_PO_CHANGE?
If it isn't so, which BAPI should we use?
Could anybody help us?
Thanks in advanceHi
Use the Function module BAPI_PO_CHANGE. This BAPI changes the existing line and also will append new lines to the existing POs.
The other mandatory part is to populate the Change Parameter tables too.
Hope this answers your question.
Raj. -
Can any one send purchase order flow with detail
hi i have one doubt during purchase order can any one send flow of purchase order
Ravi,
What Is The DataFlow Of MM?
The dataflow as functional process below are the points:
1) Purchasing Requsition -> sent by inventory dept to purcharsing dept
2) Request for Quotation(RFQ)-> Purchasing Dept shall ask the vendors to give the quotation for the requested materials by inventory.
3) Quotation -> Quotation is sent by vendors to the company
4) Purchase order-> Based on all paramers of a quotation sent by vendors. Vendors are selected from whom the material has to be obtained. The company gives purchase order to the vendor.
5) Good's receipt -> vendors sends the goods to the company with goods receipt
6) Invoice verification -> this done based on good's receipt. this means that the ordered goods have reached or not.
7) Payment -> payment is done based on invoice verification. this is (FI/CO) *-- Santosh Kumaar.M
Full MM Transaction Codes Flow:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
The FI - MM integration:
First you define the g/l master records.
1) Inventry raw material a/c
2) GR/IR clearing a/c
3) Raw material consumption a/c
Above like this you define all required g/l accounts then you will go to T.CODE - OBYC
Double click BSX (this is transaction key)
" GBB
" WRX
" PRD
These are transaction keys important.
Then you go to T CODE - OMSY (this is also important) then
Material creation T Code MM01
then
1) Purchase order T.code ME21N
2) Goods received " MIGO
3) Invoice verification " MIRO
The FI - MM integration finished
PO Flow
http://sap-img.com/materials/what-is-the-dataflow-of-mm.htm
http://sap-img.com/materials/what-is-the-dataflow-of-mm.htm
Don't forget to reward if useful... -
Hello everyone,
Is there any output type in SAP that is capable of creating an inbound delivery from a purchase order without the involvement of Outbound delivery created in SAP
Thanks in advanceHi Amar,
It is quiet possible to create inbound delivery with respect to the vendor confirmation but with respect to outbound delivery to create inbound you have to activate user exit.
If this is for stock transfer please refer sapnote1083602
Thanks...
Srini Rao -
Hi,
Is there a way to get an alert / block when a item is purchased by an vendor that is not the correct vendor because on the purchase tab in item master data there is a different vendor selected.
thx.
MarkIf you want to block purchasing from vendors different from the preferred vendor, you can insert this code into your SBO_SP_TransactionNotification procedure:
If @object_type = '22' AND @transaction_type in ('A','U')
BEGIN
If exists
(Select pl.ItemCode
From OPOR p
inner join POR1 pl on p.DocEntry=pl.DocEntry
inner join OITM i On pl.ItemCode=i.ItemCode
Where p.DocEntry = @list_of_cols_val_tab_del
and p.CardCode != i.CardCode)
Begin
set @error =1
set @error_message = 'You can purchase only from the preferred vendor !'
End
END -
Crating multiple sales orders based on one inbound purchase order idoc
Hi All,
I have a requirement to create multiple sales orders based on single inbound PO idoc.Please let me know whether is it possible or not?
Regards
maheshHi Mahesh,
What is your crieteria for different SO's ?
Regards
Megha -
Hello Sap Experts
In SRM server i need to develop one custom purchase order screen, these is my first application in srm.please it is critical for me,and i know only webdynpro application development.
Thanks &Regards
Chandu.I'm not sure there is a question here. Please elaborate on what exactly you need help with in creating this custom screen.
-
Inbound delivery creation with out reference to purchase order
As per my requirement i am third party warehouse who provides space for my customers . i receive goods from lot of customers who have their own ERP system or may not be any ERP system . The goods i am going to receive is non valuated material. How do i receive GR in the above scenario.
I am thinking to create one dummy purchase order and then create inbound delivery. Otherwise How do i create inbound delivery without reference to any documents?.Hi,
Inbound delivery
You can create purchase Order(ME21N),inbound delivery in t.code: VL31N and Goods Receipt in t.code: VL06IG and post the goods wrt PO into the GR blocked stock (movement 103) and finally you can release goods from blocked stock to unrestricted stock with 105 Movement type, if satisfy quality or other criteriau2019s.
Or
As you said, you just keeping customer stock better create material with non-valuated material type UNBW and do regular process like PO, GR & GI etc.Inbound delivery not required for above said process.
Regards,
Biju K -
Down payment (F-48) for Asset Purchase Order
Dear Experts,
Please guide me, i am getting one error while doing down payment to vendor through F-48 , I created one asset purchase order, against purchase order making down payment that time i am getting this error message
"You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class 401006 (chart of depreciation WCCD). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset. "
my asset is plant and machinery, any configuration is required.
as per my knowledge i checked in T.code : OAYB transaction type groups 15 only assign AUC asset class and Capital Advance. In account determination balance sheet accounts there is Acquistion : Down payment and Clearin G/lL for Down payment g/l a/c not assign .
SAP F1 help in that field (above said) is saying that only for AUC.
Please guid me , What to do.
Thanks & Regards
ChanduHi Chandu,
Can youplease confirm the the Asset Class (the one linked to the asset you are using for carrying out down payment with T.Code F-48) has been set-up in configuration as an AUC asset class. Check on T.Code OAOA for the radio button selected for Status of AUC.
In case your Asset Class - which is Plant & Machinery - has been set up as "No AuC or summary management of AuC" i.e. has been set-up as a final asset class then you will get the error.
Solution Options:
(1) Either change the Asset Class set-up (using T.Code OAOA).
Please note - you might not be permitted/able to do this if the system already has posted transactions for this asset class.
(2) Carry out the downpayment for an AUC Asset (create an AUC Asset using T.Code AS01). Carry out F-48 for this. Later settle this AUC asset to the required/relevant final asset (using T.Codes AIAB and AIBU).
(3) Specify your Asset Class as available for carrying out DownPayment transaction. Use T.Code OAYB and for Transaction Type Group 15, include/add a new entry for your asset class.
(4) Ensure that the Account Determination linked to you asset class (check this in T.Code OAOA) has been correctly and adequately set-up for GL account determination (use T.Code AO90).
Hope this helps.
Regards,
Ruchi -
Not able to print purchase order..
Dear All,
I am not able to print one import purchase order.
I have checked everything and also able to print another import Purchase orders..but particular this PO print out is not coming.
I have deleted message and again created the same..also condition record is maintained...
Not able to see print preview also (Not generating)
What could be the reason?
Please help..
NarenHi Naren,
try the note :111062.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=111062]
Please check the setting mentioned in the note and revert.
Thanks,
Hrishi -
SUS Invoice against Purchase Order
Hi Experts,
How to create one SUS Invoice for one whole purchase order directly?
Let us say – there are two line items in a purchase order. In SAP a GR is created for the material & a Confirmation is created from SUS and released
in ECC. Supplier wants to create only one invoice for the whole of this purchase order.
When Supplier open the “Create Invoice”, he has an option to create Invoice “For a purchase order” which lists the Purchase Order (which has GR and SES created) but when “Create Invoice” button is clicked– SUS shows a success message that “No suitable or open items found”?
Any idea on what is wrong?
ThanksSAP confirmed via a OSS Incident - this is not possible in the 702 SUS.
Maybe you are looking for
-
How to calculate difference and percentage in matrix report dynamic columns in SSRS 2008
Hi Friends, I need to calculate Difference and Percentage In matrix report SSRS 2008 1) Row grouping based On Product 2) Column Grouping Week and Fiscal Year Current week and Previous Year same Weeks 3)Data Invnetory(Value fileld) Example: If value
-
Hey guys hoping to upgrade existing OS to Leopard. before i do just wanna confirm that this operation wont effect my existing files on my mac??
-
Windows itunes to Mac itunes.
I have all my itunes material on a lacie external harddrive. All the songs were originally on a windows computer. Can I just plug in the external when I get my Mac? Do I need to do anything special? Thanks, Levi
-
TS1702 Why do a lot of my iOS devices' apps crash on launch.
My iPad has two gigs free, I update my apps regularly, and restart often. However, almost ever app, including iTunes crashes on launch. It's frustrating, and happened to me before on my iPod Touch. I want an iPhone but if I can get this issue solved,
-
Export of applicationfiles - filename
Hello, We want to export applicationfiles from DMS. This can be done easily with CV04N, and then use Distribution function. Applicationfiles are then written to the folder that is configured. Problem is, the filenames generated by the system are mean