JDev Source Code Versioning Support
Does JDeveloper2.0 provide support for source code versioning?
This would be useful at the project level. If there isn't built
in support, are there any NT-based source code management
applications that can be tied into JDev2.0? Thanks.
null
HI,
Can I use the Generic version control system with CVS on a unix
system. When I tried, I was getting some odd problems. JDeveloper
was hanging without responding.
TIA
--Gopal
JDeveloper Team (guest) wrote:
: Fred,
: JDeveloper provides two types of access to a Version
: Control System.
: Both of these systems integrate within JDeveloper using the
: Addin API (a Java API for adding fucntionality to the IDE).
: There is a PVCS Addin that is in the final stages of testing
: which should be out soon.
: There is a more generic Version Control system integration
: (which invokes a batch file (GetFile.Bat, PutFile.Bat) to
: allow integration to any version control system. This
: one is part of the CustomAddins package available on OTN.
: The former will be announced as soon as the testing completes.
: Thanks,
: -JDeveloper Team
: Fred Criscuolo (guest) wrote:
: : Does JDeveloper2.0 provide support for source code
versioning?
: : This would be useful at the project level. If there isn't
: built
: : in support, are there any NT-based source code management
: : applications that can be tied into JDev2.0? Thanks.
null
Similar Messages
-
Project setup - what's best for source code versioning?
We're about to start developing a new portal and are wondering what would be the best directory structure. It's important to decide at the beginning because we're using CVS version management for our source code (we are currently using it for our ADF development).
Are there any issues related to directory/package structure? With ADF, we had problems when we wanted jsps from one application to call those in another application. To get around that, we had to put all of our applications within the same jdeveloper "project".
I'm keen to hear any suggestions - especially if you work in a multi-application environment with concurrent development etc.
thanks,
MSince I don't have a Canon, I don't know the specifics of how to ingest media for that camera. But FCE does have the ability to log & transfer AVCHD, as I have done this with a Sony HandiCam and my Lumix GH-1.
The codec that FCE transcoded to, was AIC, Apple Intermediate Codec. FCE is 'fine' if you are not using 24p frame rates, as there are no 24p sequence options. (You can use 24p in a 25p timeline... but broadcast engineers will gnash their teeth on such botchery.)
This may or may not be an issue.
On the 'problem' of 'wyrd things happen when I whip pan my camera'... well, yeah... There are some industry standards about how fast objects should move across the field of view to avoid artifacts.
The "whip pan", namely quickly pivoting the camera, will produce strange imaging. While the technology and image formation is different, so the artifacts are different, but even for 'film film' there are limits.
One rule thumb I've run across is an object should take at least 5 seconds from one side of the screen to the other. Faster will result in artifacts, strobing, or in the case of digital cameras, 'rolling shutter' issues.
The motto of the day is... "Know thy camera"...
There may be filters to minimize or save the day if needed, but it is just better to shoot correctly in the first place... -
Source Code Control for Java development in 6.20
I am new to Java development. How do you control source code (versioning/transport) for Java development with the base R/3 is 6.20. I believe Java Development Infrastructure (JDI) is only available in 6.40. Is this the correct statement? Anyone that has work on 6.40 with Java can explain?
Let say we have this setup:
Applications are in 6.20
Portal will be EP 6.0
Do we need Web AS 6.40 to develop Java for Portal with base R/3 of 6.20. Or we can use Developer Studio to create Java accessing R/3 6.20 and display in Portal 6.0. If this is the case, how do you manage transport is you are not using JDI in 6.40.Hi Nablan,
I believe you are development J2EE applications. JDI only runs with WebAS 6.40 which supports J2EE spec. 1.3. The developed J2EE archive will not be able to deploy to WebAS 6.20 which only supports J2EE 1.2 spec. So if you want to deploy the created software build from JDI and deploy it to WebAS 6.20, then the answer is unfortunately no.
But, if you just want the Portal be able to display your application in an iView inside, then maybe you can just develop and deploy your application to the WebAS 6.40 system. Then create an iView in your EP to point to the app in the 6.40 system. That way your app will not need to deploy to WebAS 6.20.
Regards,
Marc -
Source code Verification in different systems ?
Hi gurus
I am having a custom user exit. I have to check whether the source code is same in both the Sand box and Configuration box?
How to compare between the systems ?
Please guide me. Urgent
Thanks
Meenakshi . N
Edited by: Meenakshi.Nakshatrula on May 1, 2008 8:20 PMMeenakshi,
Go to SE38 in any one of the two systems you want to compare against each other.
Display your source code.
Go to Utilities --> Versions --> Version management
Now you should see the various version of your source code. Choose the version you want to compare - I suppoer you might want to choose the current / active version.
Press the button in the top icon bar that says REMOTE comparison
This will pop-up a box. Put in the logical ID of your Target sys OR put in the RFC destination ID for your target system, and press the little green tick mark.
This brings you back to a similar looking screen as earlier.
Again press the button that says REMOTE comparison - that's it.
SAP will compare the chosen source code versions in the two systems, and give you a comparison in a split-screen format, color-coded format.
Remember to assign points if found useful.
Regards
Gulshan -
Old version Source code to .exe file conversion
I have a programming GUI source code (written in an older version of LabVIEW). Can it be supported by LABview Evaluation version 10.0.1 and be converted to an .exe file. How can I convert and use source code file for programming? What do I need to convert and how?
I'm new to LABview. Please help!!2010 can open VIs written in LabVIEW 6.0 or newer. Just double click on the top level VI. You will also need to install any hardware drivers (i.e. GPIB, DAQ, etc) that the old program used.
With the evaluation version, you can create an exe but it will have a watermark on the front panel. -
Locking at request of OP - https://support.mozilla.com/en-US/questions/844506
Are we allowed to use the Web developer function, under the "Firefox" tab in Firefox version 5.0, to edit the html source code associated with the Firefox version 5.0 home page ( so that we can personalize the home page )? Is this legal?
Sincerely in Christ,
Russell E. WillisSolution: (Free Download Manager)
Go here: http://codecpack.co/download/Free_Download_Manager.html and download Free Download Manager 3.8.1067 Beta 3, it works perfectly with Firefox 5.0.1
Solution: (to Google mail aka Gmail)
I have had this problem for a while since I did a previous Firefox update, where I had to force Gmail to load in Basic HTML else it's next to impossible to use it. The solution is this: simply update your Java, and Gmail will work without a problem using Standard HTML. To update your Java go here: http://www.java.com/en/ and select "Free Java Download".
And beta normally, universally, means "the not quite there yet version of the version we're aiming for" NORMALLY used during production and testing of a type of software. -
LLVM Version / Alchemy Source Code
Hi,
I wanted to get a better understanding of flash and decided to learn how the avm2 and alchemy works. I would like to do some fun stuff with LLVM, including generating .swfs from other languages than c/c++. By trying so I noticed that Alchemy is based on LLVM 2.1 which is kinda old (released Sep 2007). Is there a way to use or port it to a newer LLVM version? It would make my experiment a lot easier and taking advantage of over three years development on LLVM would be great .
As far as I understand alchemy adds a new backend to LLVM arch=avm2 to generate avm actionscript code from LLVM IL code. Am I correct that this addition is not open source? Would be too bad, as I hoped to get an better understanding of the avm2 by looking into it. Also that would make it possible for us users of alchemy to port it ourself.
Thank you for any hints,
FlorianI think it's possible and I've been trying to do that for the last couple of days. I believe I've found out how the process works for compiling to iphone, using something similar to the alchemy toolchain. What I'd like to do is create an actioncript compiler with alchemy, so it basically is flash - flash, but taking advantage of all the optimizations that LLVM makes on bytecode, once you can understand it. I believe that adobe uses the following process:
compile .as to ABC.
Pass ABC into the GlobalOptimizer that exists inside the actionscript compiler (ASC.jar).
It appears that GlobalOptimizer produces SSA IR code. I believe adobe slightly modifies this to be LLVM IR, and then they can just run llvm-as on the generated LLVM IR code.
I'm working on getting this functioning right now, because if I can get these stages done, then the existing alchemy toolchain should do the rest of the job (that is, taking that llvm bytecode and outputting actionscript bytecode using the existing back end). This would also explain why Adobe hasn't updated alchemy to work with a new version of LLVM, because the LLVM IR spec changes from release to release, so they'd have to keep changing the process of formatting their GlobalOptimizer output to be LLVM IR, which is probably more work than they want to invest right now.
In this list of processes, I'm on the last one. I'm currently figuring out how to convert the output from GlobalOptimizer to be valid LLVM IR but honestly, this is ALL new territory for me I need to find the specs on these things and do some reading. I had to customize the source code of the actionscript compiler to get this to work at all this far. The very fact that I had to do this also points to the fact that I'm on the right track, since posts I've seen from Adobe employees + documentation state that the actionscript compiler included in the alchemy toolkit is custom. Plus, this paper confirms many of these conclusions:
http://llvm.org/devmtg/2009-10/Petersen_OptimizingActionScriptBytecode.pdf
I think you might be the only person interested in this stuff so for the sake of not clogging up the forums with our discussions feel free to contact me directly if you'd like more info. -
Function Module to get ABAP source code for a specific version
Hi all
Is there a function module that I can use to get the source code of another function module at a specific version?
For example, can I call a function module passing in "FM_NAME" and "FM_VERSION" and have it return the lines of code associated with that object?
Thanks in advance.
StuartThanks guys
That's incredibly helpful! I have one more question that I just thought of last night...
Is there a way to hook into the code activation process? I want to be able to take a snapshot of the ABAP source code at each point when it is activated for use in another system, but need to be able to intercept this event and get the source code at that point in time.
Any ideas?
Thanks! -
I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
JeyanHi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer -
Database source code control or version management
Hi all,
I work in a data warehouse development project, where database schema changes form majority of development work. As a development DBA I look after ensuring that all the database schema changes are version controlled properly.
We currently use CVS as a source code control system. We can use CVS well enough where stored procedures, functions and packages are involved. But when it comes to table definitions, we are finding use of CVS bothersome.
Hence I would like to know, which tool are you using for version control of schema changes. Any links to best practices on DB version control would be much appreciated.I think Oracle have introduced something in 11g for version control. Also you can use third party Software like ERWIN. You can also explore Oracle Data Modelling software which is Beta currently.
Regards -
Where can I download the source code of MaxDB (even an older version)?
Just want to learn some modules of MaxDB. But now I failed to find where to download it.
Is there any old archive for the older version of MaxDB source code for download?
Thanks in advance.At times when the sources were available I tried to build it on a "new" platform (Solaris x86 32bit) and I can tell you: it's NOTHING that is obvious. Building OpenOffice or Mozilla may appear like an easy task. It took me months to get there and to be able to just build the 'build tools'.
On top, many of the sources are (historically) written in a Pascal dialect and are transferred to C with an own precompiler so there are three languages used (C, C++ and Pascal) - so it's a pretty hard (next to impossible) job to learn some algorithms from those sources.
See also here:
http://cjcollier.livejournal.com/177628.html
http://home.snafu.de/~dittmar/sapdbdev/
and just to get an idea of the modules and their structure:
http://home.snafu.de/~dittmar/sapdbdev/sapdbModules.txt
Markus -
What version of code are supported on ACE20?
I see several code versions that seem to support on ACE30.
Is A2.3.4 Or A2(3.5) that latest version for ACE20-MOD-9?
Will the version 4 or 5 run on ACE20?
I currently user A2(3).Hello Cecil,
ACE 20 supports both versions A2.3.4 and a2.3.5.
A2.3.5 just got some new features about the ipv6, then if you network does not support ipv6 currently then it would not be very useful.
Then, I would say you can choose A2.3.4.
Here you have the release notes, where you can get more details:
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_x/Release/Note/RACEA2_3_X.html#wp546207
Here you have the link where you can get it from:
http://www.cisco.com/cisco/software/release.html?mdfid=280557289&softwareid=280836738&release=A5%281.2%29&relind=AVAILABLE&rellifecycle=&reltype=latest
Currently the highest version would be A2(3.5) but if you do not use ipv6, personally I´d choose a2.3.4.
You can go directly from a(2.3)--->a2(.3.4)
ACE 20 does not support A4 series and does not support A5 series either.
Jorge -
JDK source code of earlier versions
Hi,
I'm doing some research on code clones. I wrote a tool to categorize code clones and i would like to test it on several open source projects. I found a paper of another researcher that did similar research in the past and he also used several open source projects. To compare my results with his results i'd like to take the same projects. One of them is JDK 1.1.5, but i can't find the source code on the internet. I only found the source code of JDK 1.5 and 1.6. I'd like to have the source code of version 1.1.5 or at least a version earlier than 1.5. Can anyone help me?
Message was edited by:
KinkyHagarCheck the src.zip file in your jdk folder.
-
How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor
Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
Pauli get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First : 0x4001c001
DLL Last : 0x41c7c0d8
Physical First : 0x84001000
Physical Last : 0x863bbdec
Num Modules : 294
RAM Start : 0x863c0000
RAM Free : 0x863d5000
RAM End : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files : 116
Kernel Flags : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start : 0x00000000
Driver Glob Length : 0x00000000
CPU : 0x01c2
MiscFlags : 0x0002
Extensions : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18 0x9 0x25 0x0 0x0 0x0
Row 1: 0x26 0xd 0x28 0x0 0x0 0x0
Row 2: 0x27 0x24 0x23 0x0 0x0 0x0
Row 3: 0x0 0x0 0x0 0x0 0x0 0x0
Row 4: 0x0 0x0 0x0 0x0 0x0
Row 5: 0x0 0x0 0x0 0x0 0x0 0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
Height = 0x280
Width = 0x1e0
HSW = 0x20
HFP = 0x8
HBP = 0x17
VSW = 0x1
VFP = 0x4
VBP = 0x3
DVI is not enabled
PixelClkDiv = 0x7
LogClkDiv = 0x1
ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed. -
Cannot find source code for Employee Benefit application
Hello,
I am trying to find the Employee Benefit Sample Application which used to be provided by Oracle at http://otn.oracle.com/sample_code/products/ias/content.html. Unfortunately I couldnât find the source code anywhere, neither by searching through oracle sites, nor through the internet.
Could someone please help me get it, since I just started working on applications based on this model and it is really important for me to have a complete example that works.
Thanks in advance,
StefanosHello,
This sample application used to work on older versions which is no longer supported. This is the reason, it has been removed.
Thanks.
Maybe you are looking for
-
Sun ssh does not recognize client configuration option
Running strings on /usr/bin/ssh, Solaris 10 10/09 (and earlier) shows OpenSSH_3.8, among other things. OpenSSH FAQ says that the client config (.ssh/config file) option ServerAliveInterval was introduced in version 3.8, but that option throws an erro
-
I have a premiere cc sequence of 11 mts video +audio clips,each about 3.5 mins long, each involving a green screen with different jpg files beneath -- total duration of sequence:: 38 min, 36 seconds. Media Encoder cc required over 2 and 1/2 hours t
-
firefox-15.0.1.tar.bz2 (Linux version) e.g. file:///home/user/test.html , which displays in ff14
-
P35 neo2 FR overclock and fakeboot
Hi. Is it normal that at 400x7 on every normal reboot motherboard makes 2 fakeboot? at 400x7 my sys is stable (~50min of orthos) but if i reboot the pc it makes 2 stop than start normally. no messages of wrong overclock or similar. at 333x9 I have no
-
Dear SAP Friends, I have created VC including everything necessary. I have created the Sales Order also with the necessary Variant created. But I am not able to deliver as in the availability Check it has taken as per the below: Avail Check = 01 and