Jdeveloper 9.0.3.1 problems to change DB connection

Inside the BC4JModule, at the configuration manager, it has the possibility to define the connection type. One JDBC URL and the other JDBC Datasource.
At the first time I had defined my BC4J to use the JDBC URL connection an it worked. At the second deployment I chose the JDBC Datasource and had problems.
To continue the development I decided to define my BC4J module again with the JDBC URL connection but with the JDeveloper 9.0.3.1 it is not more possible to change and "SAVE" the configuration again. It remains always to JDBC datasource connection.
I started than the "OLD" 9.0.3 JDeveloper and it works. What is wrong?

You should post this question to the Jdeveloper discussion forum for an appropriate answer: JDeveloper and ADF
Regards,
OTN

Similar Messages

  • Problem when change DBF connection

    I use jdbc dbf driver to connect to DBF.
    String databaseDriverName ="com.hxtt.sql.dbf.DBFDriver";
    Class.forName(databaseDriverName).newInstance();
    String databaseDirectory=dbase;/
    String url = "jdbc:DBF:///"+databaseDirectory;
    java.sql.Connection con = DriverManager.getConnection(url,"","");
    databaseDirectory is the path to DBF file
    I transfer data from DBF to oracle database. When transfer is complete I close the frame, copy new file with same name on same location.
    Frame is open again and i read the data from old file.
    Where is the problem?

    Even I have the same question... where is the problem? Looks like you have missed out the real part.
    Annie.

  • Problem while changing Business Area in Cost Center Master Data

    I am having a problem while changing the Business area in cost center master data, the system does not allow to change the business area due to the following reasons;
    1.  The transactional data already exists for that cost center
    2.  The desired date required to be changed, falls between analysis period 01.01.2000 to 31.12.2999
    Can anyone help me in order to reslove this issue
    Thanking in anticipation
    Edited by: Arshad  Iqbal on May 24, 2010 2:10 PM

    Dear Dejan !!
    Thanks a lot for resolving my problem actaully i have tested the scenario in Testing Server by changing the fiscal year and the system allowed to change the business area before any transactional data posted.
    Thanks Once Again
    Regards
    Ch. Arshad Iqbal

  • Problem in changing branding image.

    Hi all,
    I have a problem in changing the branding image for portal logon page.
    To my knowledge I have the change the image file under
    \usr\sap\EPD\JC0\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\portalapps\com.sap.portal.runtime.logon\layout
    But to my surprise I am not able to see gthe com.sap.portal.runtime.logon folder in the server.
    Can somebody suugest me what might be the reason.Is it any problem with the versions or something?
    Thank You,
    Regards,
    Rajesh

    It is:
    \usr\sap\EPD\JC0\j2ee\cluster\server0\apps\sap.com\com.sap.security.core.admin\servlet_jsp\logon\root\layout\
    You can do a simple search for branding-image.jpg from \usr\sap\EPD\JC0\j2ee\cluster\server0 to find the location. You can change the location or name in the config tool.
    Regards,
    Slava

  • I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

    I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (114957)

  • Problems in changing Thousand's separator appearance

    I am having problems in changing the thousands separator appearance. I am based out of India and here the thousands separator works in format - 1,00,00,000 (i.e. 2 digits after last 3 digits). I want to change this into standard 3 digit thousands separator  - 1,000,000,000. However not able to do this. Kindly suggest any workaround for this.

    Yes! You can definitely change and customize integers.
    Its a little tricky to explain how you have to do this in the Numbers interface but follow below:
    Select cells or table > open Inspector > select Cells tab (4th from the left) > Use the drop down list under "Cell Format" and select "Custom" at the bottom....
    From here you can edit your own intergers by dragging elements from below onto the field above (See example below). Don't worry if the elements do NOT match what you want below... You add the element by dragging it, THEN once in the field you can click on it and edit how many digits there are, as represented by '#' simply by pressing Up and Down on the keyboard, Or clicking on its own little drop down arrow to access features like "Remove separator". Then in between these elements simply type a comma " , " and drag the next element, keep editing away like that and you should get something like what I have below:
    Feel free to ask any more questions PrashKot :]

  • Path problem during  Change of Original

    Hello,
    I am facing path problem while changing the Original file in a DIR.
    let say i created a DIR x and attached file a.txt from c:\ and  saved the DIR.
    Now if i use cv02 and select a original for change the popup window comes with data carrier and original file path  the path is shown as c:\a.txt which is actual original path.
    if i click on continue it is opening the c:\a.txt files and  changes are done on the original file on my pc.
    This way my original file is changed on pc and in DIR also.
    I want to know how to avoid this?.
    Regards
    Shiv

    That is why they call it document "Management".  The Original File is in the "Vault" where it can be managed, not on the desktop.  If you want to protect/save the file on your desktop, set the flag in the config of the workstation application to not allow "rename" of the temporary file.  You are just attempting to circumvent the intended design of the system. What you should really do is set the flag to "delete" the file after check-in.

  • Having problem with change of name in the datagrid Coding

    I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
    The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
    There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
    This is my flash code
      function goCourse(e : MouseEvent):void
      gotoAndStop(5);
      refreshResponder = new Responder (refreshSuccess, onFault);
      connection = new NetConnection ();
      connection.connect (gateway);
      dataDG.addEventListener (Event.CHANGE, gridItemSelected);
      refreshData (true);
      function gridItemSelected (e: Event): void {
      ID = e.target.selectedItem.ID;
      courseTxt.text = e.target.selectedItem.Course_Name;
      priceTxt.text = e.target.selectedItem.Price;
      descTxt.text = e.target.selectedItem.Description;
      private function getParams () {
      var param: Object = new Object ();
      param.ID = ID;
      param.Course_Name = courseTxt.text;
      param.Price = priceTxt.text;
      param.Description = descTxt.text;
      return param;
      private function refreshData (refresh: Boolean): void {
      if (refresh)
      connection.call ("Course.viewCourse", refreshResponder);
      private function refreshSuccess (result: Object): void {
      dataDG.dataProvider = RecordSetDP.toDataProvider (result);
         dataDG.columns = ["Course_Name","Price","Description","Display"];
      private function onFault (fault: Object): void {
      trace (String (fault.description));
    This is my php file code.
      function viewCourse()
      $this->connect();
      $sql = "SELECT Course_Name,Price,Description,Display
      FROM coursetb";
      return mysql_query($sql,$this->_connection);

    i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.

  • Problem with changing Label in Bridge CS3 and CS6

    Hi there,
    I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
    1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
    2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
    I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
    Thanks very much in advance for any solution.
    Best regards

    I have re-checked the issue and I found that the problem is with JPG file.
    I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
    However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
    It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
    Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
    It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
    Here is the link for filing a problem or bug:
    http://feedback.photoshop.com/photoshop_family/

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Problem in Change own data service

    Hi ,
                I am facing problem in Change own data service. I am getting following error while opening the service.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: failed to create or init instance of model 'com.sap.xss.hr.cod.model.CodModel' in scope APPLICATION_SCOPE with instanceId 'null'
    Do I need to configure this service through SPRO under Personal Mangement -> Employee Self Service ->
    Server Specific Settings -> Adress Book -> Who's Who.
    Am I missing any configurational step on R3 side ?
    Kindly provide some solution.
    Thanks in advance
    Abhay

    Hi Abhay,
    You need to upgrade the EA_HR component to SP22. Alo make sure that SAP_HR and EA_HR components are in sync.
    SAP Note: 1081261
    Also refer thread: **Very Urgent**Do i need to upgrade SP level of EA-HR components
    Regards
    Deb

  • SSRS 2012, SQL Server 2012. Problem with changing database

    Hi all!
    I have a problem with changing database for SSRS.
    I have a SSRS 2012 and SQL Server 2012. These programs is on WIndows Server 2012.
    I need to link SSRS to the new database instance. For this I run SSRS Configeration Manager, open tab Database, click Change Database. Then I choose option "Choose an existing report server database", click Next, write the server name, test
    connection (it's successed) and push Next again. Then I see this error message:
    Error
    The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services.
    OK   
    I'm confused, cause I have compatible versions of programs and THIS error.
    Please, help me.
    Thanks.

    Hi Kirill,
    From the error message, we can know that the issue may be caused by incorrect editions of SQL Server for report data sources are used as the Report Server Database.
    When creating a report server database, please be aware that not all editions of SQL Server can be used to host the database. So we should make sure that we have used the correct database as the
    Report Server Database. For more details, please refer to the “Report Server Database Server Edition Requirements” section in the following document:
    http://technet.microsoft.com/en-us/library/cc645993.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Why am i having problems since changing from snow leopard loading maverick

    why am i having problems since changing from snow leopard downloading maverick

    Yes you solved your own question, use printer handles color, whcih shodul have been the default. If you do want to experiment with Photohsop manages color, try the CMYK profiles, and send a cmyk file. Only exception is if you print to one of the few RGB printers like a lambda.

  • Transport landscape problem (cannot change the object)

    Hi All,
    I have problem to change my object in the integration repository.
    Initially, i only have 1 XI server (dev and prod), until certain level that i have to add additional server for development. So i just install new xi in new box (fresh). and export the repository object form production and import into this new box.
    But the problem is i can't change all the object. is that any workaround to change the configuration so i can use my nex box become development and later on transport back all the changes to original production box.
    Appreciate if you can give me some advise.
    Thank you and Best Regards
    Fernand

    Hi,
    If you need to change anything in repository
    you need to click on the software component in IR
    and at the bottom of the screen you will find two checks
    that will allow (or not) you to change objects
    if you want to change anything in communication channel
    you just need to go to change mode
    you can change anything in ID
    Thanks
    Swarup

  • Problem applying changes in CS4

    Hi everyone,
    I have a problem applying changes in any document. I just can apply changes if I do zoom in or zoom out.
    Can you help me please?

    Turn off OpenGL in the prefenrences and update your graphics driver.
    Mylenium

Maybe you are looking for

  • Time Capsule Died, Data Recovery Question

    Hello, I have either the 1st or 2nd generation Time Capsule which just recently died.  Since this is my backup drive, I will need to get the data out of this.  The tech specs say its a serial-ATA server grade Hard Drive.   What kind of case do I need

  • File.exists() returning false eventhough in reality the file exists

    Hi, I am trying to create a PDF file using FDFMerge software. For creating the PDF file, I need to execute a shell script from command-line, which I am doing using "Runtime.exec". ( I opted for this 'RunTime.exec' approach so as to read the output ge

  • PO Release Approval Error

    First i did Release strategy in one client and i have transported it to other client that time i didnt know that it cant be transported After doing 3 PO when i tried to release it then i come to know that i have to configure again the Release Strateg

  • Min to Max Search Web App

    Little Help.  Need to add a search function that will look for a minimum number up to a maximum number from a search form. Already looked up and found some info in bcguru but this only shows a date min and max. Couldn't locate anything else within BC

  • Is there a BAPI to do SAP HR position assignment to BASIS User

    I am trying to automate the Basis user's assignment to SAP HR position through my .Net client program. For this i need to figure out a way. for example calling a BAPI from my client code to do this assignment. Any one knows if there exist a BAPI to d