JDeveloper 9.0.5 and creating JSP for Business Components (BC4J)

Hi,
We've been creating Web applications from our BC4J projects quite happily using JDeveloper version 9.0.3 using the option on JSP for Business Components under the Web Tier Category. Recently we've been looking at version 9.0.5 and this option doesn't exist anymore. Does anyone know what the equivalent in 9.0.5 is to achieve this automated production of web applications.
Regards

Catherine,
This wizard no longer exists in JDeveloper 10g.
We found that in the overwhelming majoring of cases, developers would use the wizard to generate a number of pages and then "hit a wall" because they didn't understand how to evolve the applications to do something more close to what they really wanted. The results produced didn't lend themselves well to iterative modification, which in the end is what the bulk of application development ends up being.
In JDeveloper 10g, the developer builds up pages and ties them together in a less fully-automated way, but in a way that means encourages the interative and consistent "RAD" approach using visual editor, property palette, code editor, and structure window.

Similar Messages

UIX JSP For Business Components

I am looking for option under Web Tier - UIX JSP For Business Components - Complete UIX JSP Application. I cannot see that option in Jdeveloper 10g which was avaialble in 9i. What is the turnaround for it.
I have an application which I wanted to convert it to jsp, so that I could deploy it on the web.
Thanks in advance.

We removed the "complete application" wizard in JDeveloper 9.0.5 since the application it was generating was hard to customize. Check out the tutorials on the JDeveloper home page to see how to build a complete application.

ABAP Routine for Deleting and creating index for ODS in Process chains

Any pointers for the ABAP Routine code for deleting and creating index for ODS in Process chains.

Hi Sachin,
find the following ABAP code to delete ODS ondex.
data : v_ods type RSDODSOBJECT.
move 'ODSname' to v_ods .
CALL FUNCTION 'RSSM_PROCESS_ODS_DROP_INDEXES'
EXPORTING
I_ODS = v_ods.
To create index:
data : v_ods type RSDODSOBJECT.
move 'ODSname' to v_ods .
CALL FUNCTION 'RSSM_PROCESS_ODS_CREA_INDEXES'
EXPORTING
I_ODS = v_ods.
hope it helps....
regards,
Raju

Just days ago, I downloaded and created folders for two batches of photos and now they are missing. They were not deleted by anyone, and even if they were, they were not found in my trash can. What happened? They were erased from my camera, so I am upset.

Just days ago, I downloaded and created folders for 2 batches of photos I downloaded from my camera to iphotos but now both are missing. They were not deleted and even if they were, were not found in my trashcan. I have looked through every folder and they are not there. Is there a bug that can get into iPhoto to do this? Is there a program Apple offers to retrieve lost photos? Thank you.

debbie5891 wrote: ... They were not deleted and even if they were, were not found in my trashcan...
How do you know they were not deleted? Is it possible that they were moved to the trash and the trash has been emptied, if not by you, perhaps by someone else?
In the best case, you mean they were not deleted from your camera. If so, it will be simple to merely download again from your camera after you have corrected any problem with your Mac or workflow.
If you have a way to be certain that your two folders were not deleted from your Mac, follow the directions provided by your Mac's Disk Utility to repair your Disk (not Disk Permissions.) On more than one occasion, disk repair has restored the visibility of missing folders I knew I had not deleted. If you have trouble with the process, post back which specific Mac OS version ( > About This Mac) you are using so we can offer specific help.
It is also possible that the missing folders might be saved somewhere you do not expect them to be.
It is also possible that they may merely be invisible and, thus, not showing in your Finder windows even after performing a Disk Repair.
Here are some more ideas you can consider:
Restart Mac and then look where you expect the folders to be. They may be visible there now.
If not, try a Spotlight search for the folder name(s) you used. Spotlight may give you a list of places to look. If you don't remember the folder name(s), try a search for the file type your camera uses for saved images. My cameras save "jpg" files, but yours may save other image file types.
You can also open a finder window and use the window's search oval to search. The method allows you to use the search "+" button to add invisible items via the "File Visibility" choice.
debbie5891 wrote:... I have looked through every folder and they are not there....
If you are using any version of Mac OS X, I doubt this statement can be true.
If you select your disk volume name (not the Media item) in the sidebar of your Mac's Disk Utility, you will see that the number of Folders and files on your disk is very large. For example,I keep my startup disk small and write most of my files to other disks. Even so, my startup disk contains more than 195,000 folders.
If you mean you used some software to search each folder, please post back the name of the app you are using.
debbie5891 wrote: ... Is there a bug that can get into iPhoto to do this? ...
I have not had the problem you describe, nor have I heard of such an iPhoto Bug.
I have used every version of iPhoto I have seen including the current new version: iPhoto '11 version 9.5 (902.7). You can find the version you are using by executing the iPhoto > About iPhoto menu command and post it back here.
debbie5891 wrote:... Is there a program Apple offers to retrieve lost photos? ...
I am not aware of any Apple apps that work specifically on photo files. If you know the pathname to the lost files, and if you are comfortable with Unix commands, you might be able to use your Mac's Terminal utility to retrieve at least some of your images. However, it will be MUCH simpler to merely download another copy from your camera.
You can search the Mac App Store for "unerase" to find several apps that can unerase files, including deleted photo files, in certain circumstances even after the trash has been emptied. To determine whether one or more of them may meet your needs, see their product info and reviews for specifics about each one.
debbie5891 wrote:...Thank you.
You're most welcome.
If you need to post back for more information, please provide specifics on your Mac OS, iPhoto version, which of the suggestions offered here you have tried, and any details not already provided about the problem status.
Message was edited by: EZ Jim
Mac OSX 10.9

Hello i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i b

hello
i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i buy iphone5s now can i creat app for iPhone 6 if it has bigger display without buying it just test it on iPhone 5s
thanks

One of my favorite things about developing for iOS using Xcode is the Simulator. It runs any of the iOS devices simulated right on your Mac. If you don't have a hardware device to test your application on, the Xcode simulator will surely be your best friend.
So to answer your question less vaguely, yes. You can own the iPhone 5s and develop for the 6. There is no real release information of the iPhone 6 at the time anyways, so I would not let it play too large of a factor in your decision.

Cannot view InfoPath Form on SHarePoint 2013 since I removed SkyDrive for Business and installed OneDrive For Business

I removed SkyDrive for Business and installed OneDrive for Business on my laptop. After that, I had problems opening a Word and Excel document in a SharePoint site (SP2013). After installing Service Pack2 from Office2010, this problem is solved.
But I still have the same problem with InfoPath. Whenever I click an InfoPath form (I have InfoPath 2010 on my laptop),...
... I get the error "cannot display web page".
When I change the URL
ms-infopath:ofe|u|http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
into
http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
I can open the InfoPath form and read it.
Any ideas about how to fix this ? I already tried to restore the Office 2010 via Control Panel - Install Programs but without any success...

Hi Gert,
As I understand, you can’t open InfoPath form in SharePoint 2013 unless you change the URL without “ms-infopath:ofe|u|”.
There are some reasons which maybe cause this issue, and you can try to do things below:
Access CA -> General Application Settings -> Configure InfoPath Form Service -> Check the two options in User Browser-enabled Form Templates.
Go into the registry by typing regedit from the Run line and rename the SharePoint.OpenDocuments.5 key (ex. SharePoint.OpenDocuments.5.old) under HKEY_CLASSES_ROOT.
In library settings, click "relink documents to this library".
Here are some similar posts for your reference:
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/quot-the-webpage-cannot-be-displayed-quot-when-trying-to-open-edit-an-office-file-from-a-sharepoint-2013-site.aspx
http://www.infopathdev.com/forums/t/28998.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

NO Links or Associations created with the "Business Components From Tables"

Hello,
I have a strange problem. I'm working on a Fusion Web Applicaiton. In the Model project, I try to create some Business Components from Tables with the help of the provided wizard.
I select one of my IDE Connections, and I choose two of my tables as Entity Objects (*PATIENTS* and COUNTRIES - more details about them bellow), and also as Updatable View Objects. For Read-Only View Objects I select some other tables, afterwards I choose to create a default Application Module, and I press Finish without creating a Business Diagram. Everything works perfectly except of the fact that the wizzard has created everything but the Links and the Associations between my tables.
To be more precise, COUNTRIES is a simple table, only two columns - ID and NAME, and PATIENTS has some columns like ID, NAME, ADDRESS, DATE_OF_ADMISSION, COUNTRY_ID, where COUNTRY_ID is a foreign key to the COUNTRIES table. Both columns, PATIENTS.COUNTRY_ID and COUNTRIES.ID are NUMBERs. I was expectig the wizard to create a Link and a Association for this foreign key constraint I have between this two tables.
On the other hand, following one of the tutorials I've found, *"Developing RIA Web Applications with Oracle ADF"*, I've noticed that when I was creating Business Components from Tables based on the HR schema, all the Links and Associations were created as they were expected. I've also tried to create the same Business Components from Tables in my own project, and all the Links and Associations were in place. Somehow, it's not working for my particular schema (the one that contains PATIENTS and COUNTRIES).
Is there something I do wrong? I've made sure that all the FK constraints are enabled, alive and kicking. From my point of view, the tables are working and behavig as they should, but I can't understand why that feature of automatically creating the Links and Associations works on the HR schema but not on mine.
Please help!
Bogdan.
PS: I am using Oracle JDeveloper Studio Edition Version 11.1.1.1.0, Oracle SQL Developer Version 1.5.5, and Oracle 10g Express Edition installed on localhost.

Hello John,
Of course I can post the scripts.
The schema name is "TEST". But you should know that there are some extra columns in the PATIENTS table, I've not mentioned before. As you can tell from the scripts bellow, the PATIENTS table has the following columns: ID (number), NAME (varchar2), COUNTRY (number), GENDER (number), ADMISSIONDATE (date), DIAGNOSTIC (number), FIRSTNAME (varchar2), SALARY (number). There are actually 3 FK constraints, I've only mentioned one for the simplifying the example. The first FK constraint is towards COUNTRIES, the second one is towards GENDERS, and the final one is towards DIAGNOSTICS. All this 3 tables have only two columns (ID as number, and GENDER as varchar2). I will post the scripts for all.
Here is the output of the Export DDL to Clipboard from SQL Developer for the COUNTRIES table:
CREATE TABLE "TEST"."COUNTRIES"
(     "ID" NUMBER NOT NULL ENABLE,
     "NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
     CONSTRAINT "COUNTRIES_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "COUNTRIES_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."COUNTRIES_PK" ON "TEST"."COUNTRIES" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."COUNTRIES_UK1" ON "TEST"."COUNTRIES" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."COUNTRIES_TRG"
BEFORE INSERT ON COUNTRIES
FOR EACH ROW
BEGIN
SELECT COUNTRIES_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."COUNTRIES_TRG" ENABLE;
Here is the same output for the GENDERS table:
CREATE TABLE "TEST"."GENDERS"
(     "ID" NUMBER NOT NULL ENABLE,
     "NAME" VARCHAR2(50 BYTE) NOT NULL ENABLE,
     CONSTRAINT "GENDERS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "GENDERS_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."GENDERS_PK" ON "TEST"."GENDERS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."GENDERS_UK1" ON "TEST"."GENDERS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."GENDERS_TRG"
BEFORE INSERT ON GENDERS
FOR EACH ROW
BEGIN
SELECT GENDERS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."GENDERS_TRG" ENABLE;
Here is the same output for the DIAGNOSTICS table:
CREATE TABLE "TEST"."DIAGNOSTICS"
(     "ID" NUMBER NOT NULL ENABLE,
     "NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
     CONSTRAINT "DIAGNOSTICS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "DIAGNOSTICS_UK1" UNIQUE ("NAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."DIAGNOSTICS_PK" ON "TEST"."DIAGNOSTICS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."DIAGNOSTICS_UK1" ON "TEST"."DIAGNOSTICS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."DIAGNOSTICS_TRG"
BEFORE INSERT ON DIAGNOSTICS
FOR EACH ROW
BEGIN
SELECT DIAGNOSTICS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."DIAGNOSTICS_TRG" ENABLE;
And finally, here is the same output for the PATIENTS table:
CREATE TABLE "TEST"."PATIENTS"
(     "ID" NUMBER NOT NULL ENABLE,
     "NAME" VARCHAR2(1000 BYTE) NOT NULL ENABLE,
     "COUNTRY" NUMBER,
     "GENDER" NUMBER,
     "ADMISSIONDATE" DATE,
     "DIAGNOSTIC" NUMBER,
     "FIRSTNAME" VARCHAR2(1000 BYTE),
     "SALARY" NUMBER,
     CONSTRAINT "PATIENTS_PK" PRIMARY KEY ("ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "PATIENTS_UK1" UNIQUE ("NAME", "ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "PATIENTS_GENDERS_FK1" FOREIGN KEY ("GENDER")
     REFERENCES "TEST"."GENDERS" ("ID") ENABLE,
     CONSTRAINT "PATIENTS_DIAGNOSTICS_FK1" FOREIGN KEY ("DIAGNOSTIC")
     REFERENCES "TEST"."DIAGNOSTICS" ("ID") ENABLE,
     CONSTRAINT "PATIENTS_COUNTRIES_FK1" FOREIGN KEY ("COUNTRY")
     REFERENCES "TEST"."COUNTRIES" ("ID") ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE INDEX "TEST"."PATIENTS_INDEX1" ON "TEST"."PATIENTS" ("NAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."PATIENTS_PK" ON "TEST"."PATIENTS" ("ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE UNIQUE INDEX "TEST"."PATIENTS_UK1" ON "TEST"."PATIENTS" ("NAME", "ID")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
CREATE OR REPLACE TRIGGER "TEST"."PATIENTS_TRG"
BEFORE INSERT ON PATIENTS
FOR EACH ROW
BEGIN
SELECT PATIENTS_SEQ.NEXTVAL INTO :NEW.ID FROM DUAL;
END;
ALTER TRIGGER "TEST"."PATIENTS_TRG" ENABLE;
If a complete DB dump would be more helpful, please let me know. I am willing to provide any details.
Thanks for your support.

Default Subpackage Names for Business Components (11g); Bug?

Does anyone know how to enable the ability to specify the default packages under Tools -> Default Project Properties ->Business Components -> Packages?
Mine are all greyed out.
Also, even when I have the bare minimum of an ADF model project, before even checking "Initialize Project for Business Components", the defalt packages are greyed out.
Further, once I do check "Initialize Project for Business Components", the section for Default Subpackage Names is complete gone.
I want to be able to specifiy the subpackages, so that when I regenerate entities etc. from tables the components go to the right packages.
Thanks for any help.

This seems like a bug to me. If you select Initialize Project for Business Components, everything is enabled. And stays that way even after you open a different application.
But , You can set these values under Tools - Preferences - Business Components - Packages. This works nicely. Once you set these, create a new application and things will be fine. If you have existing application, it may require some xml file (.jpr) manipulation. That seems to be a nicer approach. I don't know what is the purpose of Default Project Properties, when you can set everything by Tools - Preferences.

How & Where to create the Target Groups and Transport Targets for Business

Hi Experts,
I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
Thanks & Regards
suk4023
Edited by: sukande on Aug 17, 2010 8:18 AM

Hi Supriya,
Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server. Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.? Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
*Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
Pls clarify on this ......
Thanks & Regards
suk4023

Create Analytics for solutions and create audit for rating to solutions

Hi All,
I want to create Analytics for solutions, but I can't find any thing related to solutions in Analytics configuration.
And I also want to create audit for rating to solutions including rating by, rating date, score etc.
Any suggestions are appreciated!
Edited by: Bruce007 on Jun 14, 2009 11:44 PM

Hi, there is no subject are available for Solutions in OnDemand. There are no field auditing facilities available too. You may have to think about a Webservices based solution
-- Venky CRMIT

Can we access tables created internally for Business objects in CAF

Hi,
     When we create and Deploying Business objects in CAF then internally it creates tables in Oracle/Maxdb database. Can we access those tables through CAF.
          Or is it possible for Oracle to access the Business objects tables which are deployed on SAP Web Application server?
          We can configure the Oracle driver in the SAP Web App Server. But how can we use it?

Hi Rohit!
Can we access the tables created internally for BO's without the use of CRUD methods provided by them.?
Or
Can we fire queries on these tables through Oracle.? As the tables are created along with BO's in the database.
Maybe, you can do that, but why do you want to do that?
Based on the Entity Services (i.e., CRUD and find operations) that are generated for your BOs, you can implement Application Services which contain any business operation that you want to perform. Furthermore, you can expose your Application Services as Web Services. That's the designated way to do that.
Manually manipulating the underlying database tables does not sound like a good idea.
Best regards
Alexander

What is up with the Help and Support Section for Business Catalyst?

It has been very difficult for my customers and myself to access the help and support section of the site for Business Catalyst issues as we are constantly diverted to non-related Abode issues. The portal for support on Business Catalyst issue needs to be ISOLATED from ADOBE's main support section. It is bad enough that there are so many issues to deal with, but to add all the issues for all the applications is simply impossible to decipher and discover a solution.
Before the Adobe integration on the Cloud services it was much more simpler, wiith a much more efficient and cleaner layout, now every page looks like its generated by a bot that doesn't understand what I am looking for. Even the actual URL of the page is hidden so I can't even book mark it without opening the frame in a new window. My clients will not know how to do that.
Simplify plesase!
Teejay

Teejay,
Yes we are looking into this very thing and hope to improve this very soon. Not only making things a bit clearer but also a central location for all your BC support needs.
Kind regards,
-Sidney

Monitoring of inbound and outbound messages for business system ECC 6.0

Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.

James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh

Is it possible to create Thread for Swing Components or for JApplet?

Can i create a Thread by extending Thread class or implementing Runnable interface for Swing Components?
Can i create a Thread by extending Thread class or implementing Runnable interface with JApplet?
thanks

Does your website live on a Windows server? The above link you posted will require a Windows server for that to work but if you do, then you should be able to just follow the links instructions.
If your site is not on a Windows server (maybe it's on Linux?) then you would most likely need a PHP solution - something like this: http://www.w3schools.com/php/php_mail.asp. Depending on your host, they might actually have a ready-built form script for you to use so it might be best to ask them first.
You might also want some kind of validation to ensure you receive the correct information so something like jQuery Validate could work.

Monitoring and Alerting tools for Business Object Data Integrator

Hi,
We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
Thanks.
Raj.

Hi Thomas
Though both the tools objectives are for Data integration, the purpose for both tools are different.
SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
SAP BOBJ Data Integrator
Bulk Data Integration
Extraction Transformation and Loading
Deals of huge volume of data
SAP PI
It is process based integration of application data
It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
The below differences will gives you more clarity
Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
Please reply back if you need more information.
Regards
Murthy

JDeveloper 9.0.5 and creating JSP for Business Components (BC4J)

Similar Messages

Maybe you are looking for