Jdeveloper upgrade and datasource problem

Hi,
I upgraded my jeveloper to
Oracle IDE 10.1.2.17.84
java.version 1.4.2_04
and all the applications that use data source do not run anymore. When the application connects to the database, the following error message is generated.
java.lang.RuntimeException: oracle.i18n.util.builder.UnicodeMapChar
All the applications are simple and don't use any structs or BC4J components.
Thanks!

I was getting a similar error while running JDev10 and OC4J
(oracle.i18n.util.builder.UnicodeMapChar at oracle.i18n.util.ConverterArchive.readObj ConverterArchive.java:323)
I tried resolving it using various Oracle Drivers , and various Classes within the drivers , but always the same error).
The only solution that worked was moving from OC4J to iAS - the code worked without any further changes.
Regards
Paul
www.firstpartners.net

Similar Messages

Using Jdeveloper 9i and datasources

Hi,
I'm experimenting with the beta of Jdeveloper 9i and have a hit a problem I can't find a solution to.
Does anyone know how I can configure datasources within Jdev9i, replicating the set up specified within data-sources.xml of Orion? This would enable direct testing of servlets that use datasources from within Jdev9i.
thanks
Jonny
null

Rod,
Should be no problem at all. One thing to watch out for (as you're using OAF) - is that OAF expects JDEV_USER_HOME to point to a specific spot. Other JDev's shouldn't use the OAF JDEV_USER_HOME. What I have done is to create some batch scripts to start OAF that set the environment variable and start up OAF. Like this:
SET JDEV_USER_HOME=C:\o\stdalone\OA_CU2\jdevhome_client1\jdev
start C:\o\stdalone\OA_CU2\jdevbin\jdev\bin\jdevw.exeI've got 3 versions of OAF and 4 of JDev on my machine - no problems at all.
John

Classic won't start, can't upgrade, and other problems...

There's something not quite right with my Mac, and I can't quite pinpoint it. Because of this, I'm not even certain I'm posting this in the right forum! Here's the situation:
I have a PowerMac G4, upgraded with a an extra hard drive, an ATI Radeon Pro graphics card, a Sonnet Duet G4 Dual 1.8GHz processor, and (as of today, prior to this 10.4.7) am running OSX 10.4.8.
When I got the machine, it came with OS 9.1 installed. I later upgraded to 9.2.2, and then eventually to OSX. My Classic system folder stayed at 9.2.2
About 10 days ago I installed the Sonnet processor upgrade. In order to do so, I had to rejig my system a bit, as the installer for the upgrade only works in 9.2 and not Classic (yeah, bad call on Sonnet's part).
I partitioned my Back-Up drive, and installed 9.2 on it, installed the software for the processor, and then the processor itself. After checking everything worked, I then unpartitioned my Back-Up drive and removed OS9.2.
Although the processor works fine, and has doubled the speed of most tasks, ever since it was installed, I have been prone to crashes. Most often when working with large files in various applications such as Photoshop.
Also, Classic won't start now. I hardly ever use Classic these days, only for one or two tiny programs I could live without, but the fact that it refuses to start is niggling me. I reinstalled OS9.1 from my original disk, and now I can't upgrade to 9.2: all that happens is I get a message saying that I have 9.1 and that it is recommended I upgrade to 9.2! But Classic won't open, so I can't upgrade to 9.2.
The next thing that's started happening is that my broadband connection keeps dropping. This never happened before. This is happening so frequently it's really annoying; the only thing that cures it is a restart, but restarting 10 times a day isn't funny. I'm using an Alcatel Speedtouch ADSL modem. This has worked fine for over a year.
Yesterday I tried setting up a wireless connection with a Belkin router, replacing my USB modem, so my wife can use her Windows laptop to surf from the same broadband connection (my Mac doesn't need to be wireless enabled itself). But this hasn't worked, even though we followed the instruction manual exactly. I suspect that the reason this hasn't worked was because of the underlying problem on my Mac, whatever it is. I've gone back to using the Speedtouch modem to connect to the internet for now.
I've just today done a complete system reinstall of OSX 10.4, and downloaded the upgrade to 10.4.8, in an effort to solve this. Unfortunately, my Mac still seems to be in the same state and it hasn't solved anything. Classic still won't open, the connection still keeps dropping, and I'm almost at the point of kicking the **** thing through a window! Please, has anyone got any bright ideas? I don't know where to start....
G4 Digital Audio Mac OS X (10.4.8)

Hi, thanks for responding.
I've made a couple of changes, double-checked everything, and I have to say that now 10.4.8 has been on my machine for a few days, it's a lot more stable. No crashes. Maybe it just needed to "settle in", ha ha. I also got a router and went wireless, something I needed to do so my wife could use her laptop to get online. This seems to have solved the connection dropping.
So the only thing left is not being able to open Classic. I think maybe you're right, and the new processor doesn't like Classic. But, to tell the truth, I hardly ever use Classic anymore, and I can live without it. So I think I'll leave everything as it is for now, unless something major happens. I spent nearly £500 on the processor upgrade, and it has doubled the speed of my Mac: I really don't want to have to take it out:-)

10.3.9 upgrade and printer problem

As a house cleaning initiative I decided th upgrade the venerable "ruby iMac" (slot-loading, CRT, circa 2000) from OS 9.0 to 10.3 because I had a spare license & full retail CD. Took a while because I had to do upgrades to do upgrades to do the upgrades needed to install 10.3, but all went surprisingly smooth and all the files I needed were easy to find (try that with a Dell...) and all is working EXCEPT I can't get the iMac to recognize the HP3390 all-in-one printer that sits on the home LAN.
Add A Printer comes up but the printer isn't displayed in the possible choices. I can see other computers on the network from the iMac so I know basic networking is working. The HP printer installer is at best b**y but runs and terminates apparently normally with no errors. I only created one Admin user in the iMac knowing that multiple user can sometimes cause problems for substandard installers.
Anyone have any hints or what to try next?
Thanks,

On the Add-a-Printer pane, the top box is the protocol choice. Mine defaults to Appletalk, but there are six other possibilities and I have several AppleTalk printers so I don't know if that is the default.
Unless you know it is an AppleTalk-capable printer, the best choice by far is Rendezvous/Bonjour. Then wait a quarter minute and see if it can find any printers using that protocol.
hp web site says that 3990 is not enough to identify a specific product.

Upgraded and now problems

I have a Mac and I kept getting annoying messages to upgrade my Adobe Flash Player. I was on Allrecipes web site and trying to play a cooking video and it wouldn't play so I installed the latest Adobe Player. Well now everytime I open Facebook I get just the audio playing from the cooking video that I had tried to play. How do I fix this problem. I am running OSX (the one before "Lion".

hi ids!
and my library on Itunes is gone.
let's try to deal with this one first. just checking: do you mean that your itunes main library window is blank, or is something else a little different going on?
love, b

JDeveloper SSL and SOAP problems

I am using JDeveloper 9.0.3 and the Oracle SOAP library which is shipped with Oracle JDeveloper.
My application connects to a SSL enabled webservice.
The first problem I encountered was a 'no njssl9 in java.library.path' error.
I used the tips from Lehmann's BLogger site (http://radio.weblogs.com/0132036/2004/02/13.html).
I could not get this working in JDeveloper 9.0.3 because JDev 9.0.3 is using java jdk 1.3 which has not JSSE built in.
So I decided to use JDeveloper 9.0.5.2. which uses the java jdk 1.4.
It works, however now I am stuck with an error that the certificate chain is incomplete.
The webservice to which I connect sends only the 'last' certificate, so not the entire chain. Can this be the problem?
I have a couple of questions:
1) what do I have to do to ensure that my application trusts the webservice SSL certificates. I know I have to install
the certificate somewhere in the cacerts file. But which certificate en how do I store it?
2) Is it true that the Oracle SOAP library only works with the Oracle Wallet? Does that mean I cannot get Oracle SOAP
to work on an Oracle Application Server with my application?
3) Is there any way to solve the 'no njssl9 in java.library.path' error using the Oracle SOAP library in JDeveloper 9.0.3?

The Duke's Bank tutorial can be found at:
http://java.sun.com/j2ee/tutorial/1_3-fcs/
It is the last chapter of the tutorial, under the "Putting it All Together" section.
Andy

Windows 8.1 upgrade and printing problema

I recently upgraded my to windows 8 to 8.1 now when I print to my HP Officejet Pro 8600 it intermittantly leaves text out.
An example I can print a school test and it might print the some questions and some answer choices or omit the question but print the answer choices or only part of a question. It isn't consistant about what doesn't print or where it prints. My husband has windows vista and has not encountered any problems, so I'm thinking it is from the windows upgrade. Any thoughts.
Thanks in advance.
Jo

Hi jojomulherin,
Welcome to the HP Forums, I hope you enjoy your experience!
I read your post and see that since upgrading to Window 8.1 the full text document isn't printing.
I will be happy to help you.
If you haven't already, I would uninstall and reinstall the printer software which should resolve this issue.
Uninstalling HP Printer Drivers in Windows 8.
HP Officejet Pro 8600 e-All-in-One Printer - N911a Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers. Select the Full Feature Software and Driver.
Hope this helps.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Anyone found solution to 10.5.2 upgrade and font problem?

I just upgraded to 10.5.2 and I'm having the same problem with fonts "disappearing." One in particular, ITC Zapf Dingbats--a standard font in use by graphics professionals everywhere. I'm using Quark 6.5.2.
Unfortunately, I upgraded to 10.5.2 at home and at work (MacPro work, iMac G5 home). Same problem now exists at both places. This is happening for me in Quark. I haven't tested other programs because I'm on a deadline.
I've cleaned disk caches, run Font Doctor, reinstalled original font(s), yes--restarting each time after doing a single change--checked forums, etc., upgraded font software, taken font software off (in case there was a conflict), reimported fonts into Font Book. You name it, I've tried it.
Only thing I ran across that might point the way to a solution is that the same thing happened with fonts on upgrade 10.3.
Because of deadlines, I ended up changing all of the ITC Zapf Dingbat fonts in a 60-page document to the body copy and used an old-fashioned bullet. It is not the optimal typographic solution, but the only one I could come up with to meet this deadline.
This is a huge problem for me as I haven't found a solution anywhere. Any and all suggestions would be appreciated. I'm an experienced Mac User (since 1985), but I'm at my wit's end on what to try. And yes, I've even zapped the PRAM.
Thanks,

See my response to this question in the other thread you posted it in here.

Clustered Oracle 9i AS and DataSource Problem

Hi,
While working with some DataSources in the default application for an OC4J I have noticed that some things just don't seem to be working right. When modifying a DS it says it must restart the OC4J container so that the DS can be re-initialized. This works fine on the server that I am making the change on but when I go to the other server in the cluster it shows the container not being restarted although the DS information has been updated. Don't all OC4J containers in the cluster for that application have to be restarted?
We are running 9.0.2.0.1 version of the AS.

This is the way it works in 903 as well.
There is a more general forum for 9iAS questions on this site, where other product managers who look after other areas of the product answer questions. It might be worth your while to post your question there and one of the PMs from the management team might be able to shed some light on the issue with respect to a future release.
-steve-

Create a report from scratch, add Table and Datasource Problem

Hi,
I'm using the latest Crystal Reports Runtime supplied for eclipse.
I want to create a report from scratch, add a Table and then add a ArrayList of Pojos as the Datasource.
But unfortunately depending on the ConnectionInfo I supply to the Table I get different errors.
I looked through the samples and see that I have to supply properties
like
"Database DLL", "crdb_javabeans.dll" and ConnectionInfo.setUserName("");
     ConnectionInfo.setPassword(null)
I looked through the forums and find different set of properties.
Actually because I am just working with Pojos I would have thougth that something like the following
would be sufficient:
ReportClientDocument doc = new ReportClientDocument();
            doc.setReportAppServer(ReportClientDocument.inprocConnectionString);
            doc.newDocument();
Table table = new Table();
table.setAlias("reportTable");
table.setName("reportTable");
doc.getDatabaseController().addTable(oTable, null);
doc.getDatabaseController().setDataSource(myCoolection, myClass, "reportTable", "reportTable");
So could someone tell me the right/minimum Set of Properties to make a Table get connected to Pojos?
Edited by: jack mann on Aug 31, 2010 3:25 PM

With XI Release 2, you can come quite close to creating from scratch:
http://technicalsupport.businessobjects.com/KanisaSupportSite
/search.do?cmd=displayKC&docType=kc&externalId=5074668
You need Service Pack 2:
http://support.businessobjects.com/downloads
/service_packs/crystal_reports_en.asp
Sincerely,
Ted Ueda

DataSource problems after BW upgrade

DataSource problems after BW upgrade
Upgrade from
SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
to
SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
BW system: PI_BASIS 7.01 SP 6
ECC/source system: PI_BASIS 2005_1_700 SP 11
Problem exists throughout, both with generic and standard DataSources.
Here is one specific example:
Generic DataSource ZXXXXXXXX
InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
DataSource ZXXXXXXXX(SOURCESYS) must be activated
Message no. RSDS179
Then followed these steps:
1. Replicate Metadata from source system
2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
Errors returned:
Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
Error saving DataSource ZXXXXXXXX SOURCESYS
DataSource ZXXXXXXXX (SOURCESYS) could not be activated
When I try to choose "Manage" from the context menu for the DataSource, I see an error:
Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
Message no. RSM1294
The following notes have not helped:
https://service.sap.com/sap/support/notes/1377274
https://service.sap.com/sap/support/notes/1383711
https://service.sap.com/sap/support/notes/1489064
https://service.sap.com/sap/support/notes/1056060
And no other SDN threads seem to give fruitful suggestions.
Any ideas?

Hi,
Just to help the folks out here.
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

Wifi erratic on 4S after upgrading and not working even after resetting to factory setting. Why should apple isolate itself from their own product problems Matter of shame when they are not ready to communicate with the customer means they are dead.

11:22 (7 minutes ago)
to AppleSupport
Dear Sir/Madam Since the wifi is not coming ON how can I open this diagnostic on the iphone 4S am using and having problem with wifi behaving in erratic manner.
Am a professional engineer for projects and am 68 yrs old. At one time was looking after a production line manufacturing I C's in semiconductors manufacturing company of the US.
Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
Wife prefers working on ipad2 or ipad mini while traveling and has iphone 4. Am using iphone4S with laptop and Dell computer, No apple product is more than two years old.
Am having the problem in using wifi on the 4S after it was upgraded to the latest ios as per the recommendation by your software of my iphone 4S
The wifi card hangs up at it's own will and even a visit to your authorized service center in Delhi has not able to help me although they have reverted the ios back to the
one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is not able to some times take the load while working which could indicate the wifi card is getting heated up.
My daughter who is Masters in 3D Animation is an ardent fan of apple products working at present in Canada was also gifted by me a 4S about 4 months back. My daughter-in-law is using iphone4 and an ipad for her professional works along with a Dell PC in the US. While my son is a fan of samsung products and does not like an apple product.
So in a family we have 7 apple products except MAC laptop/PC.
But the fact is, this problem with 4S has really shaken me up and now it seems your products are deteriorating in quality while demanding the best pricing structures.
Since this is purely the device and the software of apple problem you may please replace this set with new one as neither have any time to push you/ request you after your service centre
in Delhi told me yesterday this cannot be repaired.
The serial No of my set is DN*****TC0 and was bought from an authorized dealer and so were the other products from the same dealer in Delhi. This set is still in showroom condition and
was never used without a protective cover.
Thanks
Ashok Dhingra
D E E Hons B E Tech MBA
Vasant Kunj Delhi
<Personal Information Edited by Host>

11:22 (7 minutes ago)
to AppleSupport
Dear Sir/Madam Since the wifi is not coming ON how can I open this diagnostic on the iphone 4S am using and having problem with wifi behaving in erratic manner.
Am a professional engineer for projects and am 68 yrs old. At one time was looking after a production line manufacturing I C's in semiconductors manufacturing company of the US.
Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
Wife prefers working on ipad2 or ipad mini while traveling and has iphone 4. Am using iphone4S with laptop and Dell computer, No apple product is more than two years old.
Am having the problem in using wifi on the 4S after it was upgraded to the latest ios as per the recommendation by your software of my iphone 4S
The wifi card hangs up at it's own will and even a visit to your authorized service center in Delhi has not able to help me although they have reverted the ios back to the
one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is not able to some times take the load while working which could indicate the wifi card is getting heated up.
My daughter who is Masters in 3D Animation is an ardent fan of apple products working at present in Canada was also gifted by me a 4S about 4 months back. My daughter-in-law is using iphone4 and an ipad for her professional works along with a Dell PC in the US. While my son is a fan of samsung products and does not like an apple product.
So in a family we have 7 apple products except MAC laptop/PC.
But the fact is, this problem with 4S has really shaken me up and now it seems your products are deteriorating in quality while demanding the best pricing structures.
Since this is purely the device and the software of apple problem you may please replace this set with new one as neither have any time to push you/ request you after your service centre
in Delhi told me yesterday this cannot be repaired.
The serial No of my set is DN*****TC0 and was bought from an authorized dealer and so were the other products from the same dealer in Delhi. This set is still in showroom condition and
was never used without a protective cover.
Thanks
Ashok Dhingra
D E E Hons B E Tech MBA
Vasant Kunj Delhi
<Personal Information Edited by Host>

HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded. I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded. I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid. I cannnot delete the account because "find my iphone" wants the password linked to this old account. But when i go into the find my iphone app it is using my corect Apple ID. How do i fix this?

If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account. You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

Jdeveloper upgrade and datasource problem

Similar Messages

Maybe you are looking for