JDeveloper wont start without commenting out setjavahome in jdev.conf

Jdeveloper crashes on start. Running jdev.exe in console I get a "Duplicate handle failed" error from java. If I edit the jdev.conf and comment out the line SetJavaHome.... then Jdeveloper will start after being prompted to find java.exe. Tried uninstalling/reinstalling. Any suggestions appreciated:
Environment Variables - JAVA_HOME:
C:\Program Files\Java\jre6
jdeveloper/jdev/bin/jdev.conf:
SetJavaHome C:\oracle\Middleware\jdeveloper\jdk

Please don't post grepped log output - grepping can be useful if you know what you are looking for - but if you knew what to look for you wouldn't be posting here. Please post the full log (or put it on a file-sharing site and post the link to it).
The output you have posted indicates that X exited successfully. The most common cause of this is an empty (or faulty) ~/.xinitrc. Do you use startx/xinit or how do you start X? What is in your xinitrc?
Also, could you elaborate on which ATI drivers you are using? Do you have the open source xf86-video-ati or one of the closed-source options? If this is xf86-video-ati, why do you have an xorg.conf at all, it shouldn't be needed? If, instead, this is a closed-source driver, where did you get the content for the xorg.conf?

Similar Messages

Installed Optibay now Macbook wont start without the charger...

Hey Guys,
Yesterday I installed an SSD along with an optibay drive in my Late 2011 macbook. I have installed my own hard drive before and the process of installing the Optibay was fairly similiar and simple.
After everything was installed I noticed my macbook does not start when the charger cable is plugged out. I have reset the SMC (Did not get any feedback from the laptop, so im not sure if anything is happening.) as well as disconnected the battery for a few seconds, still nothing. Without the charger the laptop is now dead.
If I go to system support I, my laptop has had 256 cycles and the battery status is Normal.
When I boot up with the charger plugged in, I can see that the laptop is charging and the percentages are going up.
What do you guys reccomend I do? I need the latop so it would be great if we can find a solution where I dont have to send it in for a few weeks to get repaired.
Kind Regards,
Herco van Dyk.

Hi LowLuster,
I pressed the battery indicator. When the laptop is on charge, it runs to the appropiate light. When it is not on charge, none of the lights light up. The laptop behaves like there is no battery inserted.
I also checked the battery cable and it was snug. I plugged it out and back in just for peace of mind but the problem persists.
I sent in the latop for repairs a short while after my initial message. So let's hope they can get it sorted by the weekend. (Their claimed repair time.)

Macbook Pro - Applications wont start without External Display

Hi all,
Apologies if this question has already been answered, but I have spent a lot of time Googling to no avail...
I have an early 2011 15" MBP with the following spec:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B24
SMC Version (system):          1.69f1
AMD Radeon HD 6490M / Intel HD Graphics 3000
Snow Leopard Mac OS X 10.6.8
I normally use the MBP with a 27" Cinema Display connected (mini display port/thunderbolt connector) and the clamshell shut. All is fine.
However, if I remove the external monitor and want to use the MBP with just its own display, some applications will not start. They bounce int he dock for a while and then hang, and need to be forcibly killed. Not all applications behave this way, but so far I have experienced this with Aperture 3.2, Omnigraffle, Parallels, Pixelmator.
Does anyonw have a clue whats going on and how to fix?
Thanks

Hi Grant & Bob
Thanks for your responses.
The adaptor has been removed from the Mac, and I have tried all the obvious solutions (like using detect displays), but to no avail.
I will try and investigate some other scenarious (like using a different external display) and see what happens.
Thanks

Windows defender is stuck and wont start- H50-50

windows defender w.app is stuck and wont start, definitions are out of date but
update failed several times, I've tried to reactivate Windows Defender. to no avail:
" Windows Defender is Microsoft’s homegrown antivirus solution, which is enabled by default in Windows 8. (Unless your PC vendor disabled it to activate a bundled AV solution by Norton, McAfee and their ilk, that is—as Lenovo often does." I looked on MS downloads and there isnt any defender
there isnt any also on my pc programs
I have java 32bits version 8 update 45- lenovo H50-50
thanks

Try Windows Defender support for help with that issue: <br />
http://www.microsoft.com/windows/products/winfamily/defender/support.mspx

Brand new out of the box toshiba c640 wont start help me pls

Hi everyone I just bought a brand new toshiba c640 and straight from out of the box it just wont start. nothings happening.
when we tested it at the shop it was working but when i tried it at home nothing happened.
its just a blank screen. no sound at all.
when i press the power button the green light turns on and thats about it.
the screen is blank. no noise whatsoever from the hd
please help i just forked a lot of money for this and i bought this because i need it for a presentation tomorrow its 3am now and im very very frustrated

Try a proper system reset. Power off the laptop, unplug the AC from the unit, remove the battery, press and hold down the power button for 30 seconds, replace the battery and AC, power on, when you see the Toshiba logo, press the 'F2' key to enter theBIOS Setup, in setup press 'F9' to load setup defaults, press 'F10' to save and exit, and then to boot into Windows.
Please let us know what happens. Good luck.
Mike

SCEP Service started without any malware protection engine; AV signatures out of date; AS signatures out of date

Our new pooled VDI collection reports the following errors in SCCM 2012 R2 regarding SCEP:
Service started without any malware protection engine; AV signatures out of date; AS signatures out of date
The Windows Update service is disabled and it is by design when we create a new collection, althought the service is enabled on the master template.
SCEP is not up-to-date, real-time protection is off, and this is causing us compliances issues.
Any ideas?

Hi,
How do you set the SCEP to get definition updates?
The following blog might help.
http://gerryhampsoncm.blogspot.com/2013/08/config-mgr-2012-endpoint-protection_4240.html
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Im having trouble with my i mac it freezes up an some times wont start normally it will jus display a gray and white fuzzy screen (any Help Out there)

im having trouble with my i mac it freezes up an some times wont start normally it will jus display a gray and white fuzzy screen (any Help Out there)

Hello there, DJ ROb E Rob.
The following Knowledge Base article offers up some great recommendations for troubleshooting the gray screen at startup:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

3gs wont start. stuck at apple logo until out of battery

My 3gs suddenly wont start when it ran out of battery and tried to charge it, when it had enough battery to turn on it just kept like that any help?
3gs is latest version and jailbreaked
haven't tried much to fix it, so i can do it all together

Connect the iPhone to your computer and launch iTunes, then restart the iPhone by holding down the on/off and the home buttons until you see the Apple logo. If that don't fix you problem take a look at this link, http://support.apple.com/kb/HT1414

HT201263 my phone went suddenly went out and wont start even with connection to itunes

any suggestions ? the phone wont start even with itunes

Connect iPhone to Wall Charger for 10 minutes, it may turn ON itself. If still nothing, keep on charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

Ibook wont start or work without netadapter

Hello!
My ibook v.10.4.8 wont work without the netadapter. The computer wont even find the battery. The computer is about 4 months old, so I dont think that the battery is really finished. Could it be something else? Some software problem?
please help me
Nidalius

Welcome to Apple Discussions!
The iBook was last manufactured in May 15, 2006 or earlier, as that's when the MacBook replaced it. Anything since then was simply overstock at the shop you bought at or used, refurbished, or demo, unless Apple released MacBooks later in Sweden. Regardless, have you tried running the hardware test that comes with the machine? Article 86287 explains how:
http://www.info.apple.com/kbnum/n86287
Is your data backed up as my FAQ explains?
http://www.macmaps.com/backup.html

After Effects just bounces in the dock but wont start

Hi all,
Just installed CS4 production studio under Snow Leopard. All works well and updated using the Adobe Updater. All apps are fine except AE which just bounces in the dock a few times and then stops. I read that this could be because Rosetta was not installed. I installed Rosetta from the Snow Leopard DVD and still nothing. Have restarted 3 times just in case (I also read that several restarts may be required to get it to work), but still nothing.
Any help would be greatly appreciated.
Regards
Dave

OK... Now I feel like Scott of the Antartic writing in his journal before the inevitable... I am writing this purely to help anyone else with the same issue to resolve it without the pain that I am still experiencing. Hopefully the last entry will read "all solved" and not "I am about to pop outside... I may be some time..."
After using CS2 for the bulk of my work I thought I'd try and get this solved once and for all, especially as we have a DVCPROHD project coming up and need CS4 to do it.
OK... The so now I have the suite running, except Premiere is running under at trial without the presets and the updates fail when installing. Contacted support this week, they wont re-open the original case because it has been over a month. Fair enough, new case.
The adobe guy takes control of my machine, deactivates it, then from Finder deletes lots of folders. He then asks me to re-install the products. I do this (2 hours later) and run Premiere and it appears to work with presets. I look a bit closer and notice that under the help menu of Premiere Register, Deactivate and Updates are all greyed out. This is not the case in the other products of the suite. OK, so not a major deal but does imply something is not installed right. I run the Adobe Updater, Premiere updates, but AE, PS and several updates fail.
Call back to support. This time the Adobe guy takes control of my machine suggests I deactivate the suite, run the un-install and then download and run the CS3 Clean script and re-install. I do all this. Another 2 hours later feeding discs into the machine... and... Premiere looks fine, presets all there... but wait for it... AFTER EFFECTS JUST BOUNCES IN THE DOCK BUT WONT START.
3rd call back to support and ask for the issue to be escalated. This is difficult and I have to cause a fuss to realise that this problem is the same one that has been hanging around for months and that I am not prepared to spend more hours removing every trace of Adobe from my machine and re-installing - this doesn't work. The support technician asks me to delete a hidden folder that has all the Adobe patches in it, manually download the AE 9.0.2 update and install it. It installs but AE wont start. I explain that I've had enough and want the problem escalated.
I finally get a call back from a 2nd level engineer this morning. After explaining the that AE wont start and then answering the question "why is this a problem for you!" we do some quick troubleshooting. This time I have to pull out the network cable, turn off Airport, create a new user account, log on to it and then see if AE runs. Which it does. Within seconds we get launched into the pre-determined script, "if it runs under another user account then there is nothing wrong with the applications and I should call Apple". After being patronised for a further 5 mins I had to PROVE to the guy that it was also possible that the fault was Adobes. I also know the moment I phone Apple, the response will be "Call Adobe".
The only example I could give him at the time was to image a piece of software I had written that allocated memory based on the screen resolution (this is a user preference) and if my code was badly written and crashed when encountering a screen resolution bigger than my code was expecting. OK, is that Apple's fault, no it is my code. Will it run under one user and not another, yes it will. There are a million other posibilities. Some I agree could be Apple's, but equally some could be Adobes and the big fat fob off as soon as you can is terrible.
I have also since realised since leaving this call with the technician, that:
1) This is a brand new iMac and the Adobe Suite was the 1st piece of 3rd party software installed on it.
2) The iMac is for video editing and nothing else.
3) This was working without presets before the Adobe guys deleted all these files and asked me to re-install. It is more likely that they have deleted something they should not have rather than the a bug in the OS. A bug in the OS is still possible but I suspect the problem is with a rogue bit of installation code from Adobe.
Finally incase anyone from Adobe is reading this:
I have paid thousands of pounds for this software.
I have been unable to use it for months.
A problem like this should be gold dust for you. Here is the chance to get to the bottom of an issue that several people are having, understand the mechanics of what is going wrong. Write a KB article as well as a patch and this would save the time/money and effort of an awful lot of people (including your own).
As a short thought experiment I would like everyone at Adobe to image the following:
You pay £1,000 of your own money for a tool to do your work on the promise that you can make this money back in productivity gains, new business, etc.
The tool you use every day to make a living won't work. For the benefit of the experiment, imagine this is your email client, web browser or case management tool.
You have no IT group to replace your machine or to come and solve it.
You can't tell your customers that your software is down and you have to keep doing your job.
You have to spend an additional 3 days in your own time, working late or weekends to try and fix the software yourself.
You to keep downloading a Gigabyte of data 3 or four times and you have to pay for downloads. Currently you are running up a bill of over £100 in downloads and phone calls.
You don't get paid the overtime and your customers start complaining you are late with your work.
You lose customers... you eventually get fired because you have lost too many of them.
...This is what it feels like for a small creative business to not be able to install the software they bought.

Music wont start

Hello, I have recently discovered that my iPod touch 3rd-generation has stoppped playing music. The speakers are fine and everything but it just wont start. I hit play but nothing happens. In the top right hand corner or the screen it displays music being played but no sound comes out. Also the thing to tell you how far into a song you are doesn't move at all. I need help fast please. I have a lot of songs and i want to play them!!!!!

I've exactly the same problem. After downloading from iTunes match I can't play the song... It's stuck on 0:00.
Streaming and synching without iTunes match work.
Really annoying, I already regret buying iTunes match!

Bb wont start

So 4 days ago, my blackberry hub was having a troubleshoot (ex: doesnt load all the messages) . So I restarted my phone and now my phone wont start. I cant press the restart menu to show the percentage but i think its approximately about 90-95% on restart. How do I fix this? I don't have a laptop with me because I am at a holiday. Is there any way I can fix this without losing all the memories on the phone?

For the 10-0015 error:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=E503CFD6777633D5B732CB929E348DEC?...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

HT1212 ipad wont start

Ipod wont start makes a beeping sound when plugged in

I assume you mean iPad?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT4061 ipad wont start

Hi,
i pulled my new iPad (gen 3) out of my bag and tried to start it but it wouldn't start. I have charged it overnight via the supplied wall charger but it still wont start. I have plugged it into a computer (not one loaded with itunes) and have been charging it via the computer for an hour but it still wont start.
Can you please advise next steps?

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

JDeveloper wont start without commenting out setjavahome in jdev.conf

Similar Messages

Maybe you are looking for