JDI Migration - Media Selection doubt !!

Hi,
     We are doing a JDI migration from AIX to HPUX. the DB is Oracle 10.2.0.2.
   we have few confusions as we are new to netweaver..
    1. what is the difference between JDI and NWDI..(our undeerrstanding is, in 6.4 version its called JDI and 7.0 version its called NWDI).
    2. We are planning to select the NW04S SR2 DVD's to do the JDI migration, by selecting the Additional software ->System Copy ->     Oracle -> Target System -> Central System -> Based on AS Java -> Central System installation. is it correct ??
    3. If we are at a wrong selection of the DVD's for JDI, please let us know what DVD's should we select for the JDI migration..( our assumption is, if we select NW04S SR2 DVD's, and proceeed with migration then we will be doing a migration for NWDI and not JDI, if this is true please guide us with media to be selected for JDI as it is called JDI in 6.4 version)
      These are the three questions we have !!
      Appreciate your reply
   Thanks
    Sourav

Hi,
you to use the NWDI you have to install usage types:
1. AS Java - this is a must for NWDI.
2. usage type Development Infrastructure (DI), which is actually the SAP NetWeaver Development Infrastructure (or NWDI in short).
You have to follow the installation guides for the 2004s. they are on the service marketplace: http://service.sap.com/instguides -> SAP NetWeaver -> SAP NetWeaver 7.0 (2004s) -> Installation.
when you have finally installed the NWDI, you follow the link to the post-installation tasks in order to configure the NWDI server (that is to configure DTR, CBS and CMS).
Kind regards, Jordan
Message was edited by:
Jordan Stanchev

Similar Messages

Migration Assistant: migrate only selected applications

I have a new Macbook Air and an old Macbook Air. Both on Yosemite. I want to migrate only selected (few) applications from the old to the new. Can I do that with Migration Assistant?
If not, how should I do it?
I don't want to migrate everything. Thank you!

It appears Migration Assistant is all applications or none.
Set up screen sharing between the 2 computers and copy what you want that way.

Migration Assistant - Selecting which applications to transfer

Hi,
I have upgraded to snow leopard and want to use migration assistant to transfer some of the files and apps of my old installation. As far as i can see, there is not much room to maneuver around which applications and files will be transfered. Is there a way to manually which applications and files will be transfered?
One more question, if I select machine under the settings subcategory, what will be transfered?
Thanking you in advance,
Thanos

deltagr wrote:
Hi,
I have upgraded to snow leopard and want to use migration assistant to transfer some of the files and apps of my old installation. As far as i can see, there is not much room to maneuver around which applications and files will be transfered. Is there a way to manually which applications and files will be transfered?
you can only transfer all applications or none at all. MA does not let you pick and choose which apps to transfer. it does let you choose which data folders to transfer to some degree. you can click on the triangle next to your account name and select which default folders from your account to move.
One more question, if I select machine under the settings subcategory, what will be transfered?
machine? where do you see that?
found it. I'm not sure exactly what that is. the total size is very small so this is most likely some general computer settings like the computer name.
Thanking you in advance,
Thanos
Message was edited by: V.K.

System Migration Assistant select a profile

I am using the ThinkVantage System Migration Assistant 6.0 to migrate my data from my old lenovo laptop to a new lenovo laptop. On the Current Laptop (Laptop being used) I am able to select what profile I want to transfer. However on the Target Laptop (New Laptop) I am not able to select what profile to transfer the data to. Is there anyway to select what profile I can transfer the data to on the new laptop?

Hi
Welcome To Lenovo Community
You may also refer below link which will guide you through the deployment
http://support.lenovo.com/en_US/product-and-parts/detail.page?LegacyDocID=MIGR-73571
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-50889
Hope This Helps
Cheers!!!

Migrating media browser favorites from CC to 2014

Hi all,
Is there a way to "import" my media browser favorites as I upgrade to 2014?
I am still digging in the Library, preferences and common areas, but have not found a file specifically called media browser favorites or something similar.
I can rebuild, but now that you've given me favorites I have dozens...
Thanks,
Dan

From a quick test I did, the MB favorites are saved to the app preferences. That means that you should be able to migrate your prefs from CC to CC2014 through Sync Settings. I have no experience doing this, but I gather that in order for Sync Settings to migrate settings from an earlier version, you basically need to launch CC2014 in a state where no preferences for that version exist yet. If you've already been running CC2014, that would necessitate clearing the preferences. Also, I think, you had to enable the Sync Settings feature in CC so that the prefs from that version are stored in your Creative Cloud account, but honestly I'm not positive about that part.
To learn more, please consult the Migrate Sync Settings section here.
Adobe Premiere Pro Help | Sync settings using Adobe Creative Cloud | Premiere Pro CC

Media selection not saved in Print dialog

When I select my Media, Quality and Bit Depth in the "Main" window in the Print dialog, they are not saved even though I select Save Current Settings as Preset. They change back to Plain Paper, 300 dpi and 8-bit. This will not work for high quality photo printing on my Canon iPF5000 printer. I've tried many different settings but nothing I have tried will get my settings to be saved and used. What are the "magic words" because the ones I've been using are not working?
I can print from Photoshop through a Canon 16-bit plug-in using my normal print paper profiles and get excellent results so the printer is working just fine. I am using the latest Canon print driver and firmware. I think if I could get the correct media type, quality and bit depth in the printer driver, I'd get good results as well. I have a new paper profiling device that can only print the test patches through the print driver... so I'm stuck so far.
Your help is appreciated.
OS X 10.9.2, Mac Pro 3.33 Ghz 6-core, 24 GB RAM

I discovered the root of my problem. Canon does not have a printer driver for my iPF5000 that runs under Mavericks. My workaround was to load Mountain LIon on a separate drive and use the Canon supported print driver for OS X 10.8.x. Running under 10.8 worked and I was able to successfully input and send the media type to the printer. I was making printer paper profiles with a new x-rite ColorMunki Photo.
After creating the paper profile, I copied it over to Mavericks where I use Canon's 16-bit plug-in in Photoshop to send print jobs to the iPF5000. This apparently uses a slightly different print driver than the stand-alone print driver since it works just fine. The profiles create prints that are a very close match to the screen images.
Whether or not Canon will support Mavericks for the iPF5000 is anybody's guess since it's an older printer.

Cannot print PSD without "scale to fit media" selected

I am trying to print PSD sized slightly bigger than 8.5 x 11 on my Samsung laser jet printer. I have no problem printing documents sized under 8.5 x 11, but not anything larger. Photoshop does not prompt me that clipping may occur. The file doesn't get sent to my printer queue. I'm confused as to why this is.
Any help?
Christopher
P.S. I'm using Photoshop CC on Windows 8.1, everything is up to date, printer works fine everywhere else.

I'm not sure what is causing this, but if you checkmark "print selected area" will it printout the clipped portion of your image?

Flash Media Server doubts

How many concurrent users supports Flash Media Server version 3.0.7?

There are major difference between the two editions you are mentioning but most important difference in your context is - No Remote SharedObjects and No Server-side coding is possible in Flash Media Streaming Server. So you won't be able to write full fledged Video Chat or Text Chat - you migth have to use some other technologies so that you can create chat rooms and use FMSS to do Video Streaming part.
You can see full comparision between all editions of FMS here: http://www.adobe.com/products/flash-media-server-family/buying-guide-comparison.html

How do I get a bigger media selection when I print on my Canon MG7120?

How do I get a greater choice of media when printing?

The printer drivers that Apple uses are all provided by the printer manufacturers. Therefore the choices you see for your Canon are what is provided by Canon, you can try to contact them to see if they have any recommendations.

Clean install of ML Server, migrating/retaining selected services only.

All,
I need some help and advice.
I have been using OS X Server for a few years, from Snow Leopard to Lion and now to Mountain Lion.
But the server is now not very stable. Over the years, I have tried different patches, etc, so it is hard to know what is still right for the system or not. The server will now stop after a few hours, it just hangs. I suspect it is overheating sometimes, when service won't start properly and eats up all CPU, etc. So I want to do a manual rebuild, to have a clean installation of ML Server, then copy the essential settings only for the few services we use. But I am unable to find any clear documentation on how to do that. I can't even find the option to backup and restore Open Directory anymore. Can someone advice me on what I should do?
I am not a full time administrator, and use Mac Mini Server for a small group of 15 users or so.
We mainly use it for Mobile Profiles and Wiki. As it is only 15 users, setting DNS again is not a big issue. But I want to be able to maintain all the 15 usernames and passwords, mobile profiles and the same access for each user to their wiki/blog.
So basically, I need to find ways of backing up Open Directory and Wiki. And be able to restore them on the clean build of Mountain Lion Server.
Any help will be much appreciated.
Many thanks in advance.
Regards,
Edward

All,
I need some help and advice.
I have been using OS X Server for a few years, from Snow Leopard to Lion and now to Mountain Lion.
But the server is now not very stable. Over the years, I have tried different patches, etc, so it is hard to know what is still right for the system or not. The server will now stop after a few hours, it just hangs. I suspect it is overheating sometimes, when service won't start properly and eats up all CPU, etc. So I want to do a manual rebuild, to have a clean installation of ML Server, then copy the essential settings only for the few services we use. But I am unable to find any clear documentation on how to do that. I can't even find the option to backup and restore Open Directory anymore. Can someone advice me on what I should do?
I am not a full time administrator, and use Mac Mini Server for a small group of 15 users or so.
We mainly use it for Mobile Profiles and Wiki. As it is only 15 users, setting DNS again is not a big issue. But I want to be able to maintain all the 15 usernames and passwords, mobile profiles and the same access for each user to their wiki/blog.
So basically, I need to find ways of backing up Open Directory and Wiki. And be able to restore them on the clean build of Mountain Lion Server.
Any help will be much appreciated.
Many thanks in advance.
Regards,
Edward

Media missing after server migrate

Greeting All,
I just help my friend migrate their server to another Mac. After migrate media and FCP project file. We found there are media missing via AFP sharing.
This was working fine in old server. We try SMB everything look fine but with terrible performance. Is there any we need fix in server end? Please advise.
Thanks,
Spin

The view from the command line in Terminal.app is the canonical source for the files on a system, so I'd confirm that the path matches your expectations — you can drag file or folder icons from the Finder window directly into Terminal to get the path visible — enter a # to prevent accidental execution, then drag the file or folder icon right to the input line in Terminal — and confirm you're where you think you are.
Check that your date and time and your time zone are set correctly on all systems.
Per Apple, do not log directly into the server console with a network account.

Dreamweaver CS6 - Common panel has no Media/Shockwave selection

Dreamweaver CS6 - my Insert - Common panel does not have a Media selection. My Insert Media does not have a Shockwave choice. I cannot find any way to insert a shockwave .dcr file. I reinstalled Dreamweaver CS6 and it still is not there. All resources I checked indicate that for inserting Shockwave files to use Insert/Common/Media/Shockwave. This choice does not exist for me, and it is not in Insert/Media, or in the Insert Menu from the menu bar.

Moved from the Creative Cloud to the Dreamweaver forum. They will be able to help you here.

Token from report showing up in Select List

I'm working on an app that has a drill down report. One of the columns in the report is a link (Target Type = URL) to a form that allows the user to the row that he/she clicked on in the report.
The values of parms passed to the page "511" are passed via the report tokens.
Two of the tokens for some reason aren't resolved when they get to the page (511).
The tokens #MEDIA_UID# and #LOCATION_UID# appear in the respective select lists (Media has a select list and location has a select list).
For example. When the use clicks on the link the resulting page's Media select
list will look something like this:
#MEDIA_UID#
DOC
CD
DVD
The #MEDIA_UID# Token will be included in the list of values instead of
the actual value from the row in the report.
The Target Type for the link is URL.
The URL is set to:
f?p=&APP_ID.:511:&SESSION.::&DEBUG.:511:P511_MEDIA_UID,P511_LOCATION_UID,P511_REMARKS,P511_DIST,P511_DOC_MASTER_UID,P511_NUM_TO_COPY:#MEDIA_UID#,#LOCATION_UID#,\#REMARKS#\,\#DIST#\,&P510_DOC_MASTER_UID.,#COPY_NBR#
Does the URL look OK?
Has anyone noticed this type of behavior?
Thanks.
David

Bingo. You're right. I just found that out a few minutes ago. I inherited this piece of the app from someone else. I was comparing the URLs (dev to prod). Didn't think to look at the actual column alias until after I had posted this. Someone changed
the column alias in prod but didn't make that change in the Link's target URL.
If you set the target to a page in the application and then change a column alias in the query will the link pick that change up automatically? Or do you still have to make sure and change it in the link?
Thanks.
Sorry for the wild goose chase.
David

HP LaserJet P2015 Tray selection and Macs

Hi
We have a HP LaserJet P2015x. I've had trouble with it from Day 1 as it doesn't have a US Letter / A4 override option and we use A4 paper, but the odd user prints US docs without knowing it. I made some Print Presets for the users which applies the A4 scaling at the Mac end which works when the users remember to select the Preset.
In the last few weeks the printer stopped acknowlodging Tray / Media selections made in the Printer settings tabs (Mac 10.5.7 and Mac 10.5.8) I am not sure what was updated, reset, changed but after many hours re-installing drivers, changing driver, using other drivers, resetting the print system, cold reseting the printer etc... I still couldn't get it to print to our Letterhead Tray. Tray 2, set as A4, Letterhead. Regardless of the Paper Feed or Finishing > Media Type settings I made in the Driver it just kept printing from Tray 3, A4 Plain. (or would prompt for "Please load, Tray 2, A4 Plain if both Tray 2 and 3 were set as A4)
Somehow during all of this I noticed the *"Fit to Page"* option in the Driver tab for the Printer. I had it set to "Nearest Size and Scale" I changed it to *"Prompt User"* and magically it would now actually print from Tray 2, Letterhead when I made the Media Type change to "Letterhead". I have no idea why this fixed it but I made the change on 4 other Mac's and they can all now print to both trays normally again.
Hopefully this helps someone else out!!
Matt

So, I cranked up my old PowerBook G4 (OS 10.4.11) which has the older driver for the P2015dn and the problem remains.
I have made some progress: If I want to print with paper feed from Tray 1, I pull Tray 2 out a few inches, load the paper in Tray 1, start the print job, and the yellow Attention LED flashes indicating an error. Note that the Paper Out light does NOT come on. So I press the Go button, the Attention LED goes out, and the print job completes using the forms in Tray 1 as desired.
So I'm thinking now, What Error condition? and why does clearing it make it print?
Certainly seems like a hardware problem to me as this is NOT the way the printer is supposed to work as documenetd in the User Guide.

Migration Assistant Mav.: not showing ML Time Machine backup

Hi Mac community,
my own MBP mid 2010:
clean install of Mavericks
connected FireWire 800 external hard disk with recent Time Machine backup done in Mountain Lion
started Migration Assistant, selected the Time Machine disk, and transferred all user data
everything worked absolutely PERFECTLY and now Mavericks runs smoothly with all my old user data
So I wanted to do the same thing with a relative's late 2009 iMac:
still in Mountain Lion, doing Time Machine backups to TWO different USB 2.0 hard disks
browsing the Time Machine disks manually to check whether all the files are there -- they are, including the (hidden) ~/Library folder
clean install worked fine, Mavericks runs OK
starting Migration Assistant in Mavericks ⇒ and - OH HORROR - the connected external Time Machine hard disk does not show up as a source - in fact, NOTHING shows up
So I copied over the data manually, for which I had to enable the root account (how else would one delete/replace a whole ~/Library folder??)
Then I tried to fix permissions manually (because other users could now read the files in the home folder).
All the old data (mails, contacts, calendars) is still there, but the whole thing doesn't really run smoothly; each time one logs into the account, keychain asks weird questions and dock icons pointing to programs show questions marks again. Later today, I'll try to fix permissions for the home folder as a whole (Recovery Boot ⇒ Terminal ⇒ resetpassword ⇒ Reset Home Folder Permissions and ACLs), but I'd rather do another clean install and somehow get Migration Assistant to offer me the Time Machine backup as a source for user data transfer - AS IT SHOULD in an OS that 'just works' ...
Anything I could do to convince Mavericks to use my old Time Machine backup??
This is a real nightmare for me ⇒ I f*cked up a relative's system -- really hope I can fix it again.
Cheers, folks!

sorry, i don't know what else it could be then. if you have another external drive you can try doing a full system restore from the TM backups onto that drive and see if MA will recognize that drive and migrate from it. other than this there is always manual migration. slow and tedious but it can be done. see this link for help with that
http://discussions.apple.com/message.jspa?messageID=6185507

JDI Migration - Media Selection doubt !!

Similar Messages

Maybe you are looking for