JDI tutorial "Scenario 2+" ,Prep-step "Importing Required SCs" FAILED
I am following the "Preparation" part of the scenario. I've copied SAP-JEE.sca, SAP_BUILDT and SAP_JTECHS to my transport 'inbox' directory - in my case this is C:\usr\sap\JTrans\CMS\inbox.
I checked them all in, then I go to the Transport Studio "Development" tab where they are "Waiting for import", select all, and click Import, and after a half-hour or so of the spinning icon the webpage fails and on re-visiting it each of the three components are marked "Import Failed".
I've restarted my WebAS, and I've removed all these from the check-in and then repeated the steps, same result.
Any ideas?
I am adding a little more info:
1. To re-state, the basic problem is that Import fails when importing the archives SAP-JEE, SAP_BUILDT and SAP_JTECHS.
2. I am running on Windows XP Pro with 2Gig RAM using the Sneak Preview for MaxDB SP9.
3. I have installed the JDI according to the JDI Installation Guide from service marketplace. I could not run the Template Configuration tool since I am not at SP10, but everything else is by-the-book.
In addition to looking for a solution, peraps someone has a suggestion, such as location of where Transport Studio's Import would log error messages etc?
Noting that, in the "Scenario 2+" Tutorial Step 1 substep for "Create a New DC and an Activity" there is some discrepancy that could be part of the problem. In the "Create New DC" dialog that runs, I have 2 checkboxes that are not mentioned in the tutorial steps:
Local Development Component - DEFAULTS TO UNCHECKED
Sync Used Archives - DEFAULTS TO CHECKED.
- When I leave "Sync" checked, the "Create a DC" fails on syncing.
- When I leave it unchecked, I can create the DC, add Interface and Classes, but the "Build DC's" fails with an error comlaining can't find javaLib (which is in the SAP_BUILDT that fails to import); here is the error:
/userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: tax/calc: Build failed for sap.com/tax/calc(example.org_APPLICATION_1) in variant "default": Used component not found: sap.com/tc/bi/bp/javaLib".
I'll probably try again this time check-marking "Local DC" and it will probably use the SAP_BUILDT from my local (not from DTR where it never succeeds to import). but I think I'll be bypassing the whole CMS if I do that.
==================================
So all you bright young SAPPERS out there, what can you suggest? Has anyone successfully completed this tutorial in SP9?
Best wishes,
Michael Rains
Similar Messages
-
Importing .sca files fails
Hi,
I posted this message in NWDS Administrator also. I'm trying to configure NWDI - checking in and importing required SCs.
In the CMS -transport Studio, the three checked in software components(SAP JEE, JTECHS, BUILDT) do not get imported.
The CBSmake.log file has this entry:
Info:Starting Step CBS-make at 2006-03-30 21:24:14.0208 +5:00
Error:Cannot switch to input mode PRIVILEGED, because another import is running into the same buildspace J2E_SS_D
Error:or the buildspace was manually switched to PRIVILEGED by the CBS administrator.
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2006-03-30 22:06:46.0608 +5:00
How to resolve this issue?
Thanks
SumathiHi,
Imported failed for the three .scas and the entry in CBS-make.log is:
Fatal:The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
Fatal:There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.:communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
at com.sap.cms.tcs.client.CBSCommunicator.importRequest(CBSCommunicator.java:369)
at com.sap.cms.tcs.core.CbsMakeTask.processMake(CbsMakeTask.java:120)
at com.sap.cms.tcs.core.CbsMakeTask.process(CbsMakeTask.java:347)
at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:179)
at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:376)
at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:216)
at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:585)
at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:101)
at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:583)
at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:559)
at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0.startImport(LocalCmsTransportProxyLocalObjectImpl0.java:1440)
at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1170)
at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2162)
at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:880)
at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2338)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:659)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2006-03-31 18:43:19.0707 +5:00
Any suggestions to resolve this would greatly help.
Thanks
Sumathi -
Med Rec - Tutorial 10, Procedure 2, Step 4
Having a problem with this step and need some assistance.
Summary: getting some warnings, and one error on this step.
O/S: Win2000
BEA install: D:\bea8.1\
MedRec install: D:\medrec_tutorial
No problems up until Tutorial 10, Procedure 2, Step 4, when I issue this command:
java weblogic.tools.ejbgen.EJBGen PhysicianSessionEJB.java -d d:\medrec_tutorial\build\physicianEar\physSessionEjbs
-descriptorDir d:\medrec_tutorial\build\physicianEar\physSessionEjbs\META-INF
Here's the console output:
Loading source file PhysicianSessionEJB.java...
Constructing Javadoc information...
PhysicianSessionEJB.java:3: package com.bea.medrec.utils does not exist
import com.bea.medrec.utils.MedRecUtils;
^
PhysicianSessionEJB.java:4: package com.bea.medrec.value does not exist
import com.bea.medrec.value.Record;
^
PhysicianSessionEJB.java:5: package com.bea.medrec.value does not exist
import com.bea.medrec.value.RecordsSummary;
^
PhysicianSessionEJB.java:6: package com.bea.medrec.value does not exist
import com.bea.medrec.value.Search;
^
PhysicianSessionEJB.java:7: package com.bea.medrec.webservices does not exist
import com.bea.medrec.webservices.*;
^
PhysicianSessionEJB.java:14: package org.apache.log4j does not exist
import org.apache.log4j.Logger;
^
PhysicianSessionEJB.java:37: cannot resolve symbol
symbol : class Logger
location: class com.bea.medrec.controller.PhysicianSessionEJB
private static Logger logger =
<cutting out other warnings>
EJBGen 2.13beta
Creating d:\medrec_tutorial\build\physicianEar\physSessionEjbs\com\bea\medrec\controller\PhysicianSessionHome.java
Creating d:\medrec_tutorial\build\physicianEar\physSessionEjbs\com\bea\medrec\controller\PhysicianSession.java
javadoc: In doclet class weblogic.tools.ejbgen.EJBGen, method start has thrown
an exception java.lang.reflect.InvocationTargetException
weblogic.tools.ejbgen.EJBGenException: Error: Couldn't create directory "d:\medrec_tutorial\build\physicianEar\physSessionEjbs\d:\medrec_tutorial\build\physicianEar\physSessionEjbs\META-INF\"
at weblogic.tools.ejbgen.Utils.error(Utils.java:171)
at weblogic.tools.ejbgen.Utils.errorNoLineNumber(Utils.java:176)
at weblogic.tools.ejbgen.Utils.createDir(Utils.java:438)
at weblogic.tools.ejbgen.Utils.getPrintWriter(Utils.java:375)
at weblogic.tools.ejbgen.DDGenerator.generateCode(DDGenerator.java:28)
at weblogic.tools.ejbgen.EJBGen.start(EJBGen.java:330)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.tools.javadoc.DocletInvoker.invoke(DocletInvoker.java:193)
at com.sun.tools.javadoc.DocletInvoker.start(DocletInvoker.java:92)
at com.sun.tools.javadoc.Start.parseAndExecute(Start.java:301)
at com.sun.tools.javadoc.Start.begin(Start.java:120)
at com.sun.tools.javadoc.Main.execute(Main.java:41)
at com.sun.tools.javadoc.Main.main(Main.java:31)
at weblogic.tools.ejbgen.EJBGen.main(EJBGen.java:685)
1 error
Now, on the error:
Error: Couldn't create directory "d:\medrec_tutorial\build\physicianEar\physSessionEjbs\d:\medrec_tutorial\build\physicianEar\physSessionEjbs\META-INF\"
I'm puzzled - why did it concatenate the directory names?
Help would be GREATLY appreciated!
Gerald RiceHey Gerald.
Unfortunately our instructions make a couple of inappropriate assumptions.
To complete the step, make the following additions:
1.) Add the following jars to your classpath. If these jars do not exist,
compile and create them thru the src/common build script.
C:\medrec_tutorial\build\physicianEar\APP-INF\lib\log4j-1.2.8.jar;
C:\medrec_tutorial\build\physicianEar\APP-INF\lib\value.jar;
C:\medrec_tutorial\build\physicianEar\APP-INF\lib\webServicesEjb_client.jar;
C:\medrec_tutorial\build\physicianEar\APP-INF\lib\utils.jar
2.) EJBGen 2.15 contains the -descriptorDir feature; 8.1 GA contains EJBGen
2.13beta. Please remove this flag from your cmdline. You will also need to
manually create the META-INF directory and copy the resultant descriptors to
this directory.
"Gerald Rice" <[email protected]> wrote in message
news:[email protected]...
>
Having a problem with this step and need some assistance.
Summary: getting some warnings, and one error on this step.
O/S: Win2000
BEA install: D:\bea8.1\
MedRec install: D:\medrec_tutorial
No problems up until Tutorial 10, Procedure 2, Step 4, when I issue thiscommand:
>
java weblogic.tools.ejbgen.EJBGen PhysicianSessionEJB.java -dd:\medrec_tutorial\build\physicianEar\physSessionEjbs
-descriptorDird:\medrec_tutorial\build\physicianEar\physSessionEjbs\META-INF
>
Here's the console output:
Loading source file PhysicianSessionEJB.java...
Constructing Javadoc information...
PhysicianSessionEJB.java:3: package com.bea.medrec.utils does not exist
import com.bea.medrec.utils.MedRecUtils;
^
PhysicianSessionEJB.java:4: package com.bea.medrec.value does not exist
import com.bea.medrec.value.Record;
^
PhysicianSessionEJB.java:5: package com.bea.medrec.value does not exist
import com.bea.medrec.value.RecordsSummary;
^
PhysicianSessionEJB.java:6: package com.bea.medrec.value does not exist
import com.bea.medrec.value.Search;
^
PhysicianSessionEJB.java:7: package com.bea.medrec.webservices does notexist
import com.bea.medrec.webservices.*;
^
PhysicianSessionEJB.java:14: package org.apache.log4j does not exist
import org.apache.log4j.Logger;
^
PhysicianSessionEJB.java:37: cannot resolve symbol
symbol : class Logger
location: class com.bea.medrec.controller.PhysicianSessionEJB
private static Logger logger =
<cutting out other warnings>
EJBGen 2.13beta
Creatingd:\medrec_tutorial\build\physicianEar\physSessionEjbs\com\bea\medrec\control
ler\PhysicianSessionHome.java
Creatingd:\medrec_tutorial\build\physicianEar\physSessionEjbs\com\bea\medrec\control
ler\PhysicianSession.java
javadoc: In doclet class weblogic.tools.ejbgen.EJBGen, method start hasthrown
an exception java.lang.reflect.InvocationTargetException
weblogic.tools.ejbgen.EJBGenException: Error: Couldn't create directory"d:\medrec_tutorial\build\physicianEar\physSessionEjbs\d:\medrec_tutorial\bu
ild\physicianEar\physSessionEjbs\META-INF\"
at weblogic.tools.ejbgen.Utils.error(Utils.java:171)
at weblogic.tools.ejbgen.Utils.errorNoLineNumber(Utils.java:176)
at weblogic.tools.ejbgen.Utils.createDir(Utils.java:438)
at weblogic.tools.ejbgen.Utils.getPrintWriter(Utils.java:375)
atweblogic.tools.ejbgen.DDGenerator.generateCode(DDGenerator.java:28)
at weblogic.tools.ejbgen.EJBGen.start(EJBGen.java:330)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
atsun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
atsun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
atcom.sun.tools.javadoc.DocletInvoker.invoke(DocletInvoker.java:193)
atcom.sun.tools.javadoc.DocletInvoker.start(DocletInvoker.java:92)
at com.sun.tools.javadoc.Start.parseAndExecute(Start.java:301)
at com.sun.tools.javadoc.Start.begin(Start.java:120)
at com.sun.tools.javadoc.Main.execute(Main.java:41)
at com.sun.tools.javadoc.Main.main(Main.java:31)
at weblogic.tools.ejbgen.EJBGen.main(EJBGen.java:685)
1 error
Now, on the error:
Error: Couldn't create directory"d:\medrec_tutorial\build\physicianEar\physSessionEjbs\d:\medrec_tutorial\bu
ild\physicianEar\physSessionEjbs\META-INF\"
>
I'm puzzled - why did it concatenate the directory names?
Help would be GREATLY appreciated!
Gerald Rice -
PAYABLES OPEN INTERFACE INVOICE IMPORT 시 REQUIRED FIELD 정보
제품 : FIN_AP
작성날짜 : 2005-05-10
PAYABLES OPEN INTERFACE INVOICE IMPORT 시 REQUIRED FIELD 정보
==========================================================
PURPOSE
AP Open Interface Invoice Import 를 통해 Invoice 를 생성 코자 할 경우 반드시 필요한 Field 에 대한 정보이다.
Explanation
1. PO 나 Project 과 Match 하지 않는 Invoice Case
Table : AP_INVOICE_INTERFACE
==============================
Required Columns
================
-INVOICE_ID : AP_INVOICES_INTERFACE_S.NEXTVAL를 이용하여 생성됨
-INVOICE_NUM : 특정 Supplier 내에서는 unique 해야함
-VENDOR_ID/VENDOR_NUM/VENDOR_NAME : Active 하여야 하며 PO_VENDORS과 Mapping
-VENDOR_SITE_ID/VENDOR_SITE_CODE : Active 한 Site 여야 하며 PO_VENDOR_SITES table과 mapping
-INVOICE_AMOUNT : 'STANDARD' type인 경우에는 양수, 'CREDIT' type인 경우는 음수를 입력
-ORG_ID : AP_SYSTEM_PARAMETERS.ORG_ID
-SOURCE : select lookup_code from ap_lookup_codes where lookup_type='SOURCE' 중 하나
Table : AP_INVOICE_LINES_INTERFACE
==================================
Required Columns for LINE_TYPE_LOOKUP_CODE = 'ITEM'
===================================================
-INVOICE_ID : AP_INVOICES_INTERFACE.INVOICE_ID
-INVOICE_LINE_ID : AP_INVOICE_LINES_INTERFACE_S.NEXTVAL
-LINE_NUMBER : 해당 invoice 내에서 unique 해야함.
-LINE_TYPE_LOOKUP_CODE :'ITEM'
-AMOUNT
-ACCOUNTING_DATE: Optional. Defaulted from INVOICE_DATE or SYSDATE
- DIST_CODE_CONCATENATED / DIST_CODE_COMBINATION_ID
: select code_combination_id from gl_code_combinations
where account_type = 'E' and enabled_flag = 'Y'
and summary_flag = 'N'
and sysdate between nvl(start_date_active, sysdate-1)
and nvl(end_date_active, sysdate+1))
Required Columns for LINE_TYPE_LOOKUP_CODE = 'TAX'
===================================================
-INVOICE_ID : AP_INVOICES_INTERFACE.INVOICE_ID
-INVOICE_LINE_ID : AP_INVOICE_LINES_INTERFACE_S.NEXTVAL
-LINE_NUMBER : 해당 invoice 내에서 unique 해야함.
-LINE_TYPE_LOOKUP_CODE : 'TAX'
-TAX_CODE / TAX_CODE_ID : AP_TAX_CODES_ALL table에서 mapping
-AMOUNT
-ACCOUNTING_DATE : Optional. Defaulted from INVOICE_DATE or SYSDATE
-DIST_CODE_CONCATENATED or DIST_CODE_COMBINATION_ID
: select code_combination_id from gl_code_combinations
where account_type = 'E' and enabled_flag = 'Y'
and summary_flag = 'N'
and sysdate between nvl(start_date_active, sysdate-1)
and nvl(end_date_active, sysdate+1))
2. PO Matched Invoice 의 경우 Table: AP_INVOICE_INTERFACE
============================
Required Columns
================
-INVOICE_ID : AP_INVOICES_INTERFACE_S.NEXTVAL를 이용하여 생성됨
-INVOICE_NUM : 특정 Supplier 내에서는 unique 해야함
-PO_NUMBER : approved 된 PO 여야 하며 cancelled, closed 혹은 final closed 된 PO NUMBER 는 안됨. PO_HEADERS Table 과 mapping
-INVOICE_AMOUNT : 'STANDARD' type인 경우에는 양수, 'CREDIT' type인 경우는 음수를 입력
-SOURCE : select lookup_code from ap_lookup_codes where lookup_type='SOURCE'
-ORG_ID : AP_SYSTEM_PARAMETERS_ALL.ORG_ID
Table: AP_INVOICE_LINES_INTERFACE
=================================
Required Columns for PO Matched Lines
=====================================
-INVOICE_ID : AP_INVOICES_INTERFACE.INVOICE_ID
-INVOICE_LINE_ID : AP_INVOICE_LINES_INTERFACE_S.NEXTVAL
-LINE_NUMBER : 해당 invoice 내에서 unique 해야함.
-LINE_TYPE_LOOKUP_CODE : 'ITEM'
-AMOUNT : QUANTITY_INVOICED * UNIT_PRICE
If MATCH_OPTION is 'P', then populate:
-RELEASE_NUM or PO_RELEASE_ID : Blanket Release only, validated against PO_RELEASES_ALL
-PO_NUMBER or PO_HEADER_ID : Validated against PO_HEADER_ALL
-PO_LINE_NUMBER or PO_LINE_ID : Validated against PO_LINES_ALL
-PO_SHIPMENT_NUM or PO_LINE_LOCATION_ID : Validated against PO_LINE_LOCATIONS_ALL
If MATCH_OPTION is 'R', then populate:
-RECEIPT_NUMBER : RCV_SHIPMENT_HEADERS.RECEIPT_NUM
-RCV_TRANSACTION_ID or PO_LINE_LOCATION_ID : RCV_TRANSACTIONS과 Mapping
Example
Reference Documents
Note 205331.1Chandrasekar,
as i know, the main thing you should consider is, that starting from R12 you will
be able to import invoices only through the Payables Open Interface.
basically, Invoice Import is used by OA to create invoice (from expense reports or from Oracle Projects). for standard invoice import, i've ever used Payables Open Interface.
Milan
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Chandrasekara Kayamboo ([email protected]):
I would like to know which is the best way to import invoice and what are the advantages and disadvange in each.
Regards
Chandrasekar<HR></BLOCKQUOTE>
null -
Two step import, downsizing image file sizes and/or keeping copies?
hi all,
leonie was kind enough on another thread to suggest a two step import from the iphone in order to make sure that there is no accidental deletion or data loss. my understanding (i'm repeating it here myself in case i am misunderstanding) is that this routine involves 1. importing images into Aperture via the conventional import method and then 2. backing up to iTunes (to save the images) and 3. verifying (visually i think) that the images are in the Aperture database and then if so allow Aperture to delete all the images from the iPhone.
this seems to make sense to me but i realized i had a couple of questions about general "photo hygiene" related to this kind of thing.
1. is there some way to downsize file size after images are imported into Aperture? i take a ton of photos and only some are important to keep at a high resolution and i feel like i am stuck between having a huge Aperture database cluttered with lots of photos at high resolution /or/ turning down the file size and finding that i have an important image that is at a low resolution because i forgot to turn up the file size (i think these are in settings somewhere in my phone) before i took the photo or only realized later that it was important to have this image at higher resolution. if i could downsize while thinking about it in Aperture this seems like it would work.
2. does anyone keep an external copy of their images outside of the Aperture database?
thankshi terence,
thank you.
so can i ask if anyone is using an iphone and/or what setting(s) and/or resolution folks are using?
i guess i have a bit of a dilemma in that i take a ton of photos and i only use one at a high resolution while the others can be something as insignificant as a visual note to myself. and it kind of kills me that these could be 1.2 MB in that i have a lot of them. i sort of wish there was a way to downsample imagery since a lot of these are not so important.
anyway. yeah i guess i was wondering if folks do a referenced library or keep an extra copy as a backup (i guess i am 'embedding' images in the library but i forget what i call this in aperture) - and i have started to wonder if there is some utility to doing a referenced library or keeping a backup but this seems like overkill while at the same time a referenced library would allow me the ability to downsample images from what i can tell but i am just guessing here since i haven't tried this method.
thanks. -
Export scenarios from XI and import them into PI
Dear experts
We are planning to upgrade our exitsting XI 3.0 to PI7.0.
Due to system requeriments, we need to install PI on new hardware and migrate all the existing scenario's from XI 3.0 PI7.'0
How to migrate the existing ABAP developements from XI to PI ?
It's possible to export scenarios from XI and import them into PI?
Thanks, in advance
CarmeHi,
you should go to PI 7.1 and not PI 7.0 otherwise it makes not so much sense.
And yes it's possible to migrate your scenarios. If you have UDFs you have to check them because the java version has changed.
Regards
Patrick -
What steps are required to configure the Payroll Tax ( USA)?
Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.Khi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring -
Installation Solution Manager error in the step Import Abap
We are installing Solution Manager but in the step import abap, appear
the error:
/usr/sap/SML/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/SML/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SML/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SML/SYS/exe/run/R3load: END OF LOG: 20091202234420</message>
I appreciate your help for this problem
Regards.
Ricardo RivasHi,
Check SAP note 898181.
Thanks
Sunny -
Error by Step 'Import ABAP' (SolMng 7.01 MaxDB/Linux 64bit)
Hello
I'm Installing the Solution Manager on Red Hat 5 (Linux x86_64) with MaxDB 7.7.
The installation stops by the step "Import ABAP".
Using the User <sid>adm I get:
hostname:sm0adm 14> /usr/sap/SM0/SYS/exe/run/R3load -testconnect
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SM0/SYS/exe/run/R3load: START OF LOG: 20110108224646
/usr/sap/SM0/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/SM0/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Sep 20 2010 21:57:57
/usr/sap/SM0/SYS/exe/run/R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/SM0/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SM0/SYS/exe/run/R3load: END OF LOG: 20110108224646
This is exactly the same error as in the installation protocol.
The error is similar to
ECC6 Install Error at "Import ABAP" step
but on Linux and not on Windows.
I also installed the latest R3load, but I get the same error.
Any hint would be appreciated.
Regards
T.C.Solved.
/usr/sap/SM0/SYS/exe/run/R3load -testconnect
/usr/sap/SM0/SYS/exe/run/R3trans -d
less trans.log
https://service.sap.com/sap/support/notes/1193243
rpm --install --force /mnt/data/libstdc++-3.2.3-60.x86_64.rpm -
Please provide some scenario(project) with step-by-step document for both I
Hi BPS&IP Expert,
I am new one to BPS and IP, So
I would like to do some scenario in IP and BPS
Please provide some scenario(project) with step-by-step document for both IP &BPS
Send to ID( g a n e s h 4 u 1 @ g m a i l . com)
Please help me
Regards,
GRhi ganesh,
check the foll links,
for Integrated Planning
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/content.htm
Business Planning
http://help.sap.com/saphelp_nw2004s/helpdata/en/05/242537cedf2056e10000009b38f936/content.htm
https:/service.sap.com/~sapidb/011000358700001990992004E/Transition_BPS.ppt
https:/service.sap.com/~sapidb/011000358700006942212005E/BW_IP_NW2004s_standard.pdf
regards,
raghu. -
Solar01 - Business Scenarios/Process/Process steps out of alignment
Hello Folks,
We have a situation where the business process that are now in BPH in Solar01 in Solman should have been business scenario
and same with process step should be process.... Is there any quick way to fix that like going into tables and fixing the
data? If so, Can you please let me know what are the tables in which the Business scenarios, processes and steps or the hierarchy is stored?
Or is there any other way to fix this?
Appreciate your kind response.
Cheers,
VenkyHi Venky,
Unfortunately, there is no way to do it, because the nodes have different types, and it would be like trying to transform one thing in other totally different. You can only recreate the hierarchy manually.
kind regards,
Fabricius -
How to programmatically write a step/sequence requirement ?
Hi,
I think everything is in the title !
I guess I'll have to directly write in Step.TS.Requirements.Links ? Because I didn't find anything in the Step properties / methods to this...Ok, indeed it works !
My suggestion too...
I didn't try to use the ref on the Requirements from the step because in the API poster, Requirements is set as Read Only... and there's nothing on 'Links'. I should have better looked at it
Thanks ! -
Zfs-import-cache.service fails on startup
I have been using zfs for a couple of days now.
It's only for storage purposes, not for root system.
I installed it, and enabled zfs.target for startup, but since a couple of reboots ago, I noticed zfs-import-cache.service fails resulting in sometimes, the pool not getting mounted.
● zfs-import-cache.service - Import ZFS pools by cache file
Loaded: loaded (/usr/lib/systemd/system/zfs-import-cache.service; static)
Active: failed (Result: exit-code) since sáb 2014-07-05 23:42:21 CEST; 44min ago
Process: 174 ExecStart=/usr/bin/zpool import -c /etc/zfs/zpool.cache -aN (code=exited, status=1/FAILURE)
Main PID: 174 (code=exited, status=1/FAILURE)
jul 05 23:42:21 7thHeaven zpool[174]: Unable to open /dev/zfs: No such file or directory.
jul 05 23:42:21 7thHeaven zpool[174]: Verify the ZFS module stack is loaded by running '/sbin/modprobe zfs'.
jul 05 23:42:21 7thHeaven systemd[1]: zfs-import-cache.service: main process exited, code=exited, status=1/FAILURE
jul 05 23:42:21 7thHeaven systemd[1]: Failed to start Import ZFS pools by cache file.
jul 05 23:42:21 7thHeaven systemd[1]: Unit zfs-import-cache.service entered failed state.
Any idea why would this happen?
Thanks.Xi0N wrote:BTW, I'm trying to setup zed so it would send me an email on every event, but I don't seem to get it working. I installed and started postfix, but I still don't really know how to configure it so the mails get sent. Any tips?
You need to create a script in /etc/zfs/zed.d/ - see the zed man page.
Use the existing scripts in that dir for examples (e.g. scrub.finish-email.sh).
The existing scripts use /etc/zfs/zed.d/zed.rc; in that you need to set “ZED_EMAIL” to the email address to mail to in order to make the existing mailer scripts do something. Your script could instead hard code the email address.
cmtonkinson wrote:I've got a related problem I just posted about yesterday, I wonder if this busywait tactic would work in my scenario as well - although isn't there a way to do this with Require/After instead of an ExecStartPre wait script?
If you look at zfs.target et al, you'll see they already use Require/After/Before to order things. Xi0N's problem is not the ordering, but that the kernel module hasn't always created the zfs device when systemd runs the .service.
I use ZFS as my root, and the zfs hook runscript has a similar wait in it - so for me the zfs device exists by the time systemd runs the .service.
I don't know if your problem is the slowness of the zfs kernel modules or something else. My first port of call would be to check the journal for errors. -
BUILD Failed b\c required SCs
I'm working with scenario 2+. Everyting was working correctly until I deleted the content of the TMP\CBS\* since I needed more disk space.
Since then, I am not able to build the CONS compartment. I get errors like "Used component "sap.com/ejb20" has NO VALID Component Description Archive (DCDA). The component seems to have never been built successfully." or "Used component "sap.com/com.sap.jdo" has NO VALID Component Description Archive (DCDA). The component seems to have never been built successfully."
Obviously it cannot find the three .sca archives to build my compartment. I re-checkin the archives to CONS and to DEV, but I still get the same error.
I also tried to "Initiate the compartment" and "build the compartment", but it's reloading/rebuilding only the DCs of my SC and not the three required SCs.
Is there a way to reload this three .sca archives so I am able to build my compartment?
Thanks a lot,
Deborah.After importing the SCA-to to DOV, CONS definitely they are going to be loaded to CBS again.
after import of one of them check the CBS and see whether the branch has reloaded the DCs.
All of the should be 161 -
Hi Guys,
We have enhance the Standard ESS/MSS applications. The activation and check-in into development system went on successfully. The assembly step was also successful, but suprisingly the import to QA failed.
The logs give out the following error message. Suprising that it is stopped eploying at Per_Address_AU/Per_Addr DC. The DCs before that got deployed appropriately. After thsi failed the import paused. Please see the compelte error message below.
Appreciate any guidance
Failed to depl
oy the file '/usr/sap/QEP/JC01/j2ee/cluster/server0/./temp/webdynpro/public/sap.com/ess~au/webdynpro/Applications/com.sap.xss.hr.per.au.address.Per_Address_AU/Per_Addr
ess_AU.xml' into the database. Reason: Development Object 'sap.com/essauaddr' contains already same repository content. Hint: fully qualified name of the repository
VMO must be globally unique.
[EXCEPTION]
#3#sap.com/ess~au#com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook#com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to depl
oy the file '/usr/sap/QEP/JC01/j2ee/cluster/server0/./temp/webdynpro/public/sap.com/ess~au/webdynpro/Applications/com.sap.xss.hr.per.au.address.Per_Address_AU/Per_Addr
ess_AU.xml' into the database. Reason: Development Object 'sap.com/essauaddr' contains already same repository content. Hint: fully qualified name of the repository
VMO must be globally unique.
at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.checkVMOsExistInOtherDC(RepositoryUpdateManager.java:504)
at com.sap.tc.webdynpro.repository.deploy.RepositoryUpdateManager.deployRepositoryContent(RepositoryUpdateManager.java:98)
at com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook.onDeploy(RepositoryContainerHook.java:232)
at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1007)
at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1259)
at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#00110A43A3160060000014E4000010FF00044A9E44E8228B#1207943571541#com.sap.engine.services.deploy##com.sap.engine.services.deploy#Administrator#388860####da0389700800
11dd9bd100110a43a316#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in operation update with application sap.com/ess~a
u.#2#update#sap.com/ess~au#
#1.5#00110A43A3160060000014E5000010FF00044A9E44E843CA#1207943571549#com.sap.engine.services.deploy##com.sap.engine.services.deploy#Administrator#388860####da0389700800
11dd9bd100110a43a316#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeployme
ntException: Exception in operation update with application sap.com/ess~au.
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:394)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:294)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)Hi Viswadeep,
Application with same name not possible with the same application aliases - context root. You need to define different application aliases for the application to work properly.
Best Regards
Arun Jaiswal
Maybe you are looking for
-
How do i keep my husbands apps, contacts etc if i give hime a new apple account
Hi, My husband and I both have iphones, but we have only one itunes account. He has apps using his username for example words with friends, i have my username and we play each other as well as other people. He doesnt't like it when he gets my apps
-
CAN THE MS OFFICE FILES MOVED TO TRASH BE RETRIEVED
I JUST DOWNLOADED APPSCLEANER FROM NET AND ACCIDENTALLY REMOVED SOME FILES OF MS OFFICE TO TRASH. NOW SOME OF THE APPLICATIONS ARE NOT OPENING OR WORKING PROPERLY AND SHOWING EROR MESSAGE. I TRIED BY DRAGGING THE DELETED FILES/ITEMS TO THE DESKTOP B
-
How to download CS3 Design Premium
I've been trying to download CS3 Design Premium from here: Download CS3 products I still have the installation disc, but it is stored away somewhere really good. Anyway, I have the serial number and figured if I download a trial version I can just up
-
What next after BW 3.5?
Does anyone know any planned content and date of next release of BW after version 3.5? Also does anyone know where to find information for BW release strategy after 3.5. Thanks
-
Dicionario Aurelio comprado no Itunes nao abre no Imac
Fiz uma compra no Itunes do soft Dicionario Aurelio, ele fez o donwload mas nao consigo abrir o programa, já autorizei em preferencias mas nao abre de jeito nenhum alguém pode ajudar?