JFrame Not Painting Until Resize

I have a couple of components in my JFrame. At first, it looks like the JFrame's not painting. I tried calling repaint() before and after I made the JFrame visible. I also moved the JFrame, which should repaint it. However, if I try to resize the JFrame or just click while the cursor is in "resize mode," everything draws and acts fine. Unfortunately, I want to make the JFrame non-resizable. What's the problem?

try calling the validate method before repainting

Similar Messages

  • Jscrollbar scrollbar not painting

    I have a jscrollpanel and whenever I populate the panel, the jscrollbar actual scrollbars do not paint until i hover my mouse over them. How would I make it repaint automatically?

    Read the tutorials for working examples.
    If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
    Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

  • JScrollbar not painting scrollbars until mouseover?

    I have a jscrollpane that has a jtable attached to it, it paints the table just fine, but the jscrollbars do not appear until I mouseover the place where the scrollbar should be. Is there a method I should call that would call the elements of the scrollbar itself? Thanks and happy new year

    Why don't you actually read the reply. Apparently the 70 other people who read your question thought it was a good answer since they had nothing to add.
    It works for everybody else in the forum so all you should need to do is read the tutorial for a working example and then compare your code to see whats different.
    We can't guess why it works for everybody else in the forum and not you. Apparently you are writing some wierd code. You where then asked to post a SSCCE, because we are not mind readers and can't guess what your code looks like.
    I suspect you won't be getting any further help with this question. Maybe you will learn how to post a proper question the next time. And you might learn how not to piss off the only persion who even made an attempt to help solve your problem over the last 5 days.

  • Clicking certain parts of PS CC UI remove brush functionality (can't paint until tab-out)

    I ran this fix here on the Asus Vivotab Note 8: http://helpx.adobe.com/photoshop/kb/tablet-functions-dont-photoshop-142.html
    and ran into this weird problem.
    if I click certain parts of photoshop -- ie the swatches which were docked to the right as default -- the brush would not paint. this is fixable by tabbing out, or clicking on the photoshop icon on the taskbar even and clicking back on PS. moving the swatches and all the other toolbars slightly so that none of them are docksnapped to edges fixed that problem with most of the buttons, tec. BUT using the menu pulldowns at the top will trigger this annoyance, also if I use a plugin like painters wheel, for example, clicking the colour wheel itself will render the brush non-functional again. Also, clicking certain settings inside the brush settings menu will also trigger this problem (like pulldown menus, etc).
    Thanks for looking into this!

    Hey there. It didn't make a difference whether it was disabled for rightclick or not. However I grabbed the latest feelit drivers that came out yesterday from Wacom, and now the problem has metamorphosed: it fixes the majority of the menu disabling brush issues, but now photoshop will sometimes disable pressure sensitivity until I tab out and tab in again. this is something that also randomly breaks in photoshop CC on my desktop computer at work (on a cintiq with windows 8), I have to occasionally tab out and tab back to get pressure to come back. Any suggestions or thoughts would be really welcome as it's really annoying when it breaks up my workflow.
    Thanks!

  • When opening up Firefox, I kep getting a message: Firefox kept this page from reloading". My home page opens up but some other websites do not open until I hit the "allow" but. How do I remove this or adjust this?

    My home page opens up fine, and there is a message, " Firefox kept this page from automatically reloading", and this same message shows up all the time. When I got to new websites, they will not open until I hit the "allow button" How do I turn this on or off, or adjust it?

    Go to Tools --> Options.
    In the Advanced tab go to "General". Uncheck the check box "Warn me when websites try to redirect or reload the page"

  • TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device.  Problem did not exist until updated IOS arrived.  Colours change of their own free will despite being corrected on both iPAD and MacBook Pro.  Any an

    iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device.  Problem did not exist until updated IOS arrived.  Colours change of their own free will despite being corrected on both iPAD and MacBook Pro.  Any answers?

    Please do not post the entire messages log as it takes up unnecessarily a lot of space.  It seems that there is a corrupt/nonfunctional file called
    [email protected]nt.plist
    Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above.  Empty the trash and restart.

  • My hp laserjet m2727nf will not work until i shut off power and power back on.

    My laserjet will not work until i power off then power on after every printing job. It first started happening over the weekend when it sat idle for 2 days. Then it was once a day and now every time i need to print. What could be the problem?

    So i didn't read anything about the suggestion about the configuration report?
    I would recommand turning off wireless (if it has it), unplugging usb, unplugging network cable, unplugging fax cable. Then i would reboot the printer go to the Menu and in Reports try to print a "Configuration Report".
    If it still doesn't print i would unfortunately then may be try resetting it back to factory default. perhaps there is some setting that is causing this issue. Also causes printer to fully reinitialize itself. There should be a button in the menu and setup to set back to defaults.
    Let me know if any of that helps and what the results of trying to print an internal report are.
    I am an HP Employee.

  • (com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.

    Hello,
    I am fairly new at Xserve administration, but I got thrown in the fire and i need your help.
    My system.log is being hammered with this error:
    (com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.
    I did my research and it seems to be related to Wiki, but I disabled wiki and restarted and it is still coming up. Any advice would really help
    System Version: OS X 10.10.1 (build 14B25)
    Server Version: Server 4.0.3 (Build 14S350)

    Try deleting the preferences file

  • Unknown Column Name "XYZ" not detemined untill runtime.Select query.

    Hi,
    I have written a query in ABAP.I am getting following error.Can some one help me resolve this.There is a column "LANDX" in standard table T005 of PI which i need to get values from. The problem is that the column is visible only at runtime and not otherwise.How can i fetch data from this coulmn writing a select query for this.
    Query written is:
    SELECT landx from T005 into table it_t005.
    Error:
    "Unknown column name "XYZ" not determined untill runtime,you cannot specify a field list."

    Hi Deepika u were right. that there is a landx field but it is included in that table.
    so u cant exactly get it.
    now u can get ur country name and iso code just like this.
    tables: t005t  , t005.
    data: BEGIN OF it OCCURS 100,
            landx like t005t-landx,
            intca like t005-intca,
            END OF it.
    SELECT t005t~landx t005~intca   into CORRESPONDING FIELDS OF TABLE it
      from T005t
      INNER JOIN t005 on ( t005t~land1 = t005~land1 ).
    it is fulfilling ur need.
    Edited by: Matt on Feb 3, 2009 7:49 AM - Please don't use txtspk

  • Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

    Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

    It seems there's a workaround here:
    https://discussions.apple.com/thread/5566037?tstart=0

  • Do not continue until a file exists in powershell

    Hi,
    I was wondering if there is a method in powershell to get it to 
    continually check whether a file exists and do not progress until it finds it.
    i.e
    DO WHILE  
    c:\flag.txt NOT EXISTS
    Wait 10 seconds
    END
    <Next command >
    So that the <next Command> section is only executed once it finds the file c:\flag.txt
    Is this possible?
    Thanks,
    Zoe

    I doubt that it would have been very helpful anyway.  The requirement was
    "check whether a file exists and
    do not progress until it finds it"
    so blocking is exactly what's called for.  Putting it into a background job is probably just going to trade checking of the file status for checking on the job status.
    [string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
    My post was very helpful, indeed.
    Blocking any instance of an application (PowerShell in this case) is almost always a very bad decision (*) because it blocks the UI.
    Do you understand that a UI, when blocked cannot process any other command from user, just because the UI is blocked?
    ( Alright, Ctrl+Break can stop the process, and the terminate the PowerShell session too! )
    Your argumentation is proper of a non-programmer.
    Imagine the situation: you, the user, has a powerful computer at your finger tips, with last generation of MS server, which is running your smart PS script that's blocking (how many hours for?) your PS instance. In this case, you don't need a powerful computer,
    what you need is a better PowerShell scripter.
    Haven't heard of Star-Job?
    Spend sometime reading about it, it's worth the reading.
    ( Alright, your mvp friend seems never heard of it, when I look at the crap code he did using Star-Job in another thread. )
    The solution is very simple: Start a job to wait for whatever have to be waited; then, keep using the PS instance
    normally, and check once or another if the job is completed (or use another sync mechanism).
    This is smart!
    Blocking the UI is since ever, not smart.
    (*) except very specific situations; fortunately, current computers are preemptively multitask.
    I understand it blocks the UI, but we don't have any indication in the question that this is going to be used in an interactive session or that the OP doesn't know about background jobs.  If it's going to have to monitor/wait for an extended period
    of time it could well be being implemented as a scheduled task or job, or even as a persistent job.  No matter what the session environment is, some solution for implementing that blocking behavior will be needed to satisfy the stated requirements, and
    the posted solution will do that.
    The assumption is that the OP isn't smart enough to figure out or experienced enough to know that what they're asking for will block their interactive session while it waits for the file.  I don't see anything in the question to warrant that assumption. 
    If it's going to have to wait an arbitrarily long time, a permanent registered event might be a better solution than the time loop.
    [string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

  • Preloader Not Loading Until The Start of Lesson In Captivate 7

    I created a Scorm 2004 compliant lesson using Captivate 7. The file size is ~7MB. When I load and run the lesson on our LMS I don't see the preloader until 3-4 seconds before the file loads. I'm staring at a blank screen for about 45 seconds before anything happens. I have the preloader set at 10% but I can't get it to work.
    I loaded the file to one of our FTP sites and ran it on an html page and it does the same thing.
    Our customers are asking us why there is no indication that the lesson is loading and all I can say is it's a problem with Captivate 7.
    I upgraded to 7 because I was told the problem was fixed, but it's still bad.
    Any help is appreciated.
    Thanks

    Yes, it's set to look in the Cp7 preloader folder. I found this on a Captivate website and I think it answers the question.
    "As mentioned, preloaders are only really applicable for HTM/SWF output. But what you may not realize is that they will only work if the content is served from a web server over HTTP. Conversely, the preloaders will NOT work if the same content is served up from a LAN server drive over TCP/IP.  This is due to the fact that SWF preloaders need to communicate with the server to calculate and show the percentage of file currently loaded.  This communication works with web servers, but not with LAN servers."
    Unfortunately, Cp7 preloader is going to work on our LMS. I'm going to build a preloader class in Flash and call the Cp7 swf using that.
    Thanks for your help
    Date: Sat, 18 Jan 2014 00:34:37 -0800
    From: [email protected]
    To: [email protected]
    Subject: Preloader Not Loading Until The Start of Lesson In Captivate 7
        Re: Preloader Not Loading Until The Start of Lesson In Captivate 7
        created by RodWard in Adobe Captivate - View the full discussion
    If you still have Captivate 6 on your PC, then make sure that the preloader in this Cp7 project is not pointing at a folder in the Cp6 install directory.  It should be using a Cp7 preloader.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6026026#6026026
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6026026#6026026
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6026026#6026026. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe Captivate at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Notification on apps are not showing until i open them ??

    notification on apps are not showing until i open them

    Hello captin007,
    Thanks for the question. After reviewing your post, it sounds like apps show notification only after you open the app. I would recommend that you read this article, it may be able to help the issue.
    Understanding notifications on iPhone, iPad, and iPod touch - Apple Support
    If you're not receiving notifications for a specific app, try these steps:
    Verify that the app supports notifications. 
    After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
    Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario 

  • Billing Doc should NOT generate until you do PGI.....

    Hi,
    Please help me for the below Scenario:
    I have an Issue which is, Billing document should not generate until and unless you do PGI in Delivery.
    Can anyone tell me CONTROL PARAMETERS for this issue.
    Thanks in Advance.
    Raj

    Hi there,
    Standard SAP willnot allow invoice unless delivery is PGI'ed.
    Check the copy control routines in VTFL at header level. Check if the requirement assigned in copy control from LF to F2 is 011 Head.dlv-rel.w/o GI. If yes, change it. 011 will allow F2 to be created without PGI. Change it to 3 which is Header/dlv.-related & try it.
    Regards,
    Sivanand

  • Not able to resize my objects in Nested iview

    Dear all,
    This is how I created my dashboard.
    Model -> iview -> Layers(tabs) -> Each layer has various forms, queries and charts.
    Now I have changed it to
    Model -> iview -> Layers(tabs) -> Nested iview-> Each Nested iview has various forms, queries and charts.
    Can you suggest the best approach in terms of flixibility and performance.
    When I introduced a Nested Iview I amd not able to resize my objects ( table, chart, forms etc). I am not sure why. When I go into nested iview and go to Layout tab I see a blank page and can see nothing.
    Could anyone help me please.
    Also I would appreciate if anyone can  suggest me the best practice for creating a dashboard.
    Thanks,
    KK

    Hi,
    Yes you are correct.
    to make good Layout for Nestedview contents drilldown to the Nestedview and then go to its layout there you can make the Chages to layout.
    Regards,
    Govindu

Maybe you are looking for