JIT Schedule output getting determined even for FRC Release

Hi,
We are using LPA type scheduling agreement as we need generate releases for FRC Schedule and JIT schedule. We have copied the standard and created 2 output types: ZFRC for FCR Schedule and ZJIT for JIT Schedule.
When we run ME84 to generate the releases for both:
In case of JIT Release u2013 the correct output ZJIT is determined.
http://img2.freeimagehosting.net/uploads/8cf75781a6.jpg
However, for FRC Release, there is a problem u2013 both JIT & FRC outputs u2013 ZJIT & ZFRC are getting determined even though only ZFRC is setup in config. The additional ZJIT output is ideally not to be determined.
http://img2.freeimagehosting.net/uploads/4b2071c283.jpg
Any pointers to resolve this issue of extra JIT schedule output being determined would be a great help.
Thanks,
Best regards,
Prashant

Hi,
Check following points -
1) Scheduling agreement is released.
2) In Source list of the material, the Scheduling Agreement & the relevant line item is mentioned. In the MRP area the option '2 - Scheduling Agreement delivery schedule generated automatically.
3) If required quota arrangement is also maintained.
Regards,
Prashant

Similar Messages

  • Getting xml tags for PO releases.

    I need some help in getting xml tags for PO releases.
    When I refer metalink they gave me the following for Std PO.
    Create a new Standard Purchase Order and DO NOT approve it. Let it be in Incomplete status. Go to
    concurrent requests and run the 'PO Output for Communication' concurrent
    program will the following parameters:
    Print Selection: All
    Purchase Order Number From: The PO # you just created
    To: The PO # you just created
    Test: Debug
    May I know for PO releases what are additional parameters.I tried to enter release numbers in addition to the above.Bit it did not work,..
    I am having issue in getting buyer contact phone for PO releases.So I am trying to see if the work_tele_phone is available for Po releases xml tags.
    Can anyone please advise
    prasamb

    To get the tag name, you can use the following XSL stylesheet:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsl:stylesheet version="1.0"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:template match="node()">
    <xsl:value-of select="name()"/> <xsl:text> </xsl:text>
    <xsl:apply-templates/>
    </xsl:template>
    </xsl:stylesheet>

  • CUIC 9.1.1 Report scheduling issue - getting data only for current date

    Hi,
    CUIC : 9.1.1
    ICM: 9.0.3
    Description:We have CUIC publisher and Subscriber deployed in Cisco UCS C series server. When we schedule a report in Subscriber, we are getting data of current date even we schedule for old dates. Eg. If I schedule a report for yesterday, getting output as today's data. This is applicable for all the historical reports.
    There is no such issue in Publisher.
    Regards,
    Alag

    Try this...
    {TableName.DateField} < DateAdd("d", -2, CurrentDate)
    HTH,
    Jason

  • Report Pdf output getting Junk characters for some boiler Plate fields

    Hi All
    For Dunning Letter Report registered in Oracle Applications,made changes in Column headings like added customer number as Kunde for German Letter
    but in pdf output it's appearing as junk characters even date field is happening like that. It's happening for German, Spanish, Italy and French Letters. Working ok for Netherlands, English.
    any input to fix this solution will be great
    Thanks
    Kamalakar.G

    Maybe you check the NLS_LANGUAGE-settings on the client where you "edit" the reports-definition.

  • Schedule lines getting created even when material is there in stock

    Hi Friends,
    I have configured a normal material and have sufficient stock also, but when I am creating a sakes order the system is generating schedule line for the material even when I have stocks.
    Can someone please advice what could be the problem and the possible solution.
    Regards,
    Wasim.

    Dear wasimuddin.sayed,
    When you are creating sales order definitely system will create the schedule line for Confirm delivery date and delivery QTY.
    that is the functionality of schedule line.
    now if you don't have stock at plant level on the same date then as per availability configuration system will confirm the another schedule line on which confirm delivery date and  qty will be available.
    if not satisfy the answer request you to elaborate the question in detail.
    Best Regards
    Hanumant

  • Schedule line getting created even when material is in stock

    Hi Friends,
    I have configured a normal material and have sufficient stock also, but when I am creating a sales order the system is generating schedule line for the material even when I have stocks.
    Can someone please advice what could be the problem and the possible solution.
    Regards,
    Wasim.

    Dear wasimuddin.sayed,
    When you are creating sales order definitely system will create the schedule line for Confirm delivery date and delivery QTY.
    that is the functionality of schedule line.
    now if you don't have stock at plant level on the same date then as per availability configuration system will confirm the another schedule line on which confirm delivery date and  qty will be available.
    if not satisfy the answer request you to elaborate the question in detail.
    Best Regards
    Hanumant

  • Credit limit Block is not getting removed even after the releasing n VKM3

    Dear all,
    I got a Simple credit check  for my client i have set it in a particular order type. so when i create a sales order it is showing the credit limit has been exceeded and blocked the Sales order. and when i check in Va02 the block is set in delivery block as credit limit. when i go and release the order in vkm3 it is releasing the sales order. and i saved the order.
    now when i come to check the order the block is still set in the sales order. till i manually release it in the va02.
    but why the system is not changing the status when i release it in vkm3
    Regards

    Hi ,
    Looks like , the delivery Blocks is updating programmatically
    check  "USEREXIT_CHECK_VBEP" If there is any code put
    also USEREXIT_MOVE_FIELD_TO_VBEP and look for LIFSP
    thanks
    santosh

  • Schedule line number determination - Schedule line category CP(MRP)

    Hello All,
    I want to know on what basis schedule line numbers getting determined.
    Schedule line category: CP-MRP
    Sales order line items getting confirmed based on the Planned order--> production order created through MRP run.
    I have created sales order line item 1 with 100 quantities. for example I created today. RDD also today.
    3 production order created.
    Those production orders confirmation date as below.
    Production order 1 - 60 quantities - 14.04.2014
    Production order 2 - 30 quantities - 16.04.2014
    Production order 3: 10 quantities - 18.02.2014.
    There are four schedule lines for the line item 1.
    All the 4 lines showed as per the confirmation date order.
    But the schedule line numbers are not as per the above order.
    For example,
    Schedule line number   ----- delivery date ----- Confirmed qty
    1.                                         09.04.2014            0
    3.                                         14.04.2014            60
    2                                          16.04.2014           30
    4                                          18.04.2014            10
    On what basis this schedule numbers getting determined? Is there any standard procedure ?
    Why schedule line numbers not inline with the confirmed date?
    Let me know if you need more information.
    Thank you.
    Regards,
    Rakkimuthu C

    Hi,
    Schedule line number is the number that uniquely identifies the schedule line .
    Use When an item has more than one schedule line, the system automatically assigns a unique number to each line. The number is displayed in the details screens for schedule lines.
    Note The schedule line number serves internal purposes and does not, for example, determine the sequence of schedule lines in the overview screen. The schedule lines on the overview screen are sorted by date.
    The schedule line number will get created automatically by the system. I hope this will clarify your doubt. Thanking you.

  • EDI Output ZB00 not getting determined in case of Split Deliveries.

    Hello All,
    A very Good Morning to you,
    Hope you are doing good,
    We have come across one critical Issue where the EDI Output ZB00 Dispatch Advice is not getting determined in case of few Split Deliveries in PROD.
    Issue : On a daily basis our Client is generating Split Delivery Process used for some specific customers only.
    These specific customers we are maintaining in ZPARAMS Table. The Flow of the Process is as below.
    Sales Order -->Parent Delivery ZLF--> Split Delivery ZLS--> Invoice ZF2.
    First the Sales Order ZOR is created through VA01 or EDI.
    This ZOR is processed via ZVL10A to create parent delivery ZLF.
    Once the parent delivery ZLF is created an Outbound IDoc SHPOD gets triggered which goes to the Distribution Centre Technicolor UK to check the confirmed qty and materials that needs to be delivered.
    Once the Quantity is verified and confirmed from DC an Inbound IDoc SHCON interface SAP.
    This Inbound SHPCON IDoc checks the entry in ZPARAMS for that customer. If the entry is found it creates one more Split Delivery ZLS doing picking and post Goods Issue in one step. This is the point where the ZB00 output is determined automatically in ZLS Delivery and processed successfully immediately.
    After that the Normal Invoice ZF2 is created.
    We have given the process flow details in the attachment along with Functional Modules used by the EDI Team.
    Now the Issue we are currently facing on a daily basis in PRD Out of the Total Count of ZLS Deliveries in few of ZLS Deliveries ZB00 Output is not getting determined at all which is causing a huge revenue loss. For remaining ZLS Deliveries it is getting determined correctly and processed.For Split Delivery we have only 2 Customers.
    We would like to know why this is happening in case of only few ZLS Deliveries.
    As a work around we have just write one program for these disputed deliveries where it will go in VL02N of these deliveries and save it without doing any changes. This will make ZB00 determined and processed immediately.
    We have even check the scenario in Quality Client no Issues at all. It is getting determined and processed successfully for all the test cases we created.
    Please could you help us on this so that we can fix this critical Issue.
    Many Thanks,
    Farhan.

    if QA system works correct
    you probably need to find the difference between it and PRD client.
    I guess it is a huge job.
    but who does if not you?
    because you have  a lot of custom things included coding
    also request abaper.

  • Schedule lines are not getting confirmed even though stock is there

    HI,
    i want to discuiss one sensitive issues which is a simple one.
    my schedule lines is not getting confirmed even stock is there at sales order.
    there is no delivery block.
    there is no minimum stock level.
    there is no credit check for that.
    there is stock of 2 EA in that plant and storage location, but stock is not getting confirmed at sales order level or transaction level.
    even stock is there it is going to avaliability check overview screen and giving stock confirmation after 12 days.
    even i checked all the dates.............but its of no use.
    what to do ?
    after testing all the possible options i am taking help from
    please help me in this regard,
    regards,
    balajit

    Hi
    you need to check the following.....
    First check the Factory calander of your plant whethear some holidays or not
    Second most importantly you have to check which stretagy group is assigned  in the material . whethear it is make to order or make to stock. change it as make to stock.
    "What happened if material stretagy group is make to order then from sales order system generate requirement of that material against that particular stock, that time system do not consider the unrestricted stock and not confirm schedule line."
    Regards
    Shambhu Sarkar

  • Getting Rolling Date for a request in scheduled request set

    Hi All,
    I have a request set and autoinvoice runs as a part of this request set , autoinvoice has parameter default Date and when I schedule this request set , I have to fill this parameter (eg:07/07/2006) as this is mandatory parameter. However when I schedule this request set , I find that now reques set runs autoinvoice everyday with default date parameter having same value ie 07/07/2006 even though I have setup request set correctly ie I have supplied current date as default value for this parameter in request set.
    Can anybody tell me how do I get rolling date for a Autoinvoice request which fires as a part of scheduled request set running everyday.

    Hi Robert,
    This is an AOL problem. Please post your query in the AOL forum to get better replies.
    Regards,
    Swapna.

  • JIT Scheduling Agreement Not getting saved

    Hi Gurus,
    while saving a JIT scheduling agreement LZJ type in VA31 t-code, i am getting the following error;
    "Call usages for LP 30075000 and JIT customer SAJ4 do not match. Message no JIT00 801"
    can anyone of you let me know what setting is missing.
    its urgent to proceed with testing...
    thanks in advance
    Sunil

    Sunil,
    If i am right you may have to check the following for "Controlled delivery profile" to function properly;
    1. Ship to party in JIT agreement
    2. Ship to partner description against JITV partner description
    3. Usage field at header and item level in agreement
    4. Shipping point
    5. Route.
    If all these are ok, then the error should go and document should get saved.
    Regards,
    Syed Nasir

  • Fields update in "Schedule Lines for FRC sched." in a scheduling agreement

    May I know how the following fields in the "Schedule Lines for FRC sched." section in a scheduling agreement are being updated?
    We have already a new inbound delivery with goods receipt (last June 1, 2010) but the following fields still show the previous inbound delivery details:
    For example:
    Date of last del. 08.10.2009
    Last d. note no. 91011
    Last GR 21.10.2009
    Last GR qty. 54.500
    I wish I can show some screenshots here.
    Thanks a lot in advance for your answers.

    Hi Sravan,
    As per my view point, this is standard SAP behaviour. System will generate PR only in case of external operation.
    If you go to OPL8 (Order type dependent parameters) for your respective order type & plant combination you have option of maintaining setting related to PR only and there is no option of using scheduling agreement or generating schedule lines.
    I don't see any possibility to use scheduling agreement using to have schedule lines for external operation.
    Regards,
    Tejas

  • How to get the Open qty. in JIT Schedule in VA33 txn.

    How to get the Open qty. in JIT Schedule in VA33 txn.
    The F1 Helps says Structure VBEPD field name is OLFMNG.

    any clues ??

  • I have an iPhone 4S with broken speaker right now, I took it to the Genius Bar and was told to pay $199 if wanting it replaced. Is there anyway I could, get an iPhone 5 instead of 4S, even for a more expensive cost?

    So here's the thing: a few days ago I found the volume of the speaker on my phone going very low when I pick up the phone, I could barely hear anything. We took it to the store and was told that we'd pay $199 if wanting it replaced, or getting an iPhone 5 for $130 for a maxplan. Ok, so it's next to impossible for me to give up my plan cause you can't find a plan nearly as good as mines at this price. Then is there any other way to get apple to give me an iPhone 5 instead of 4S even for a expensive price??

    No.
    All warranty or out of warranty replacements are of the same model only.

Maybe you are looking for