JMS Adapter and Conversion Agent

Hi,
Has anyone worked on JMS adapter and Conversion module? JMS adapter is working fine without the conversion agent module.
processing sequence is as follows
1 SAP XI JMS Adapter/ConvertJMSMessageToBinary Local Enterprise Bean convert_JMS2Bin
2 SAP XI JMS Adapter/ConvertBinaryToXMBMessage Locl Enterprise Bean convert_Bin2XI
3 sap.com/com.sap.nw.cm.xi/CMTransformBean Local Enterprise Bean 0
4 CallSapAdapter Local Enterprise Bean call_AF_MS
Also I have given the Parameter Name and value.
Let me know if i am missing something.

I have done the configuration in sender JMS channel. I even created file sender and it is not working.
when i went and checked the initialization events in http://xxxx:50000/CMViewer, I can see some errors under service Initialization.

Similar Messages

Complex XML to Plain in JMS adapter "Content conversion module"

Hi!
I have read the document on "How To use the content conversion module with XI3.0 J2EE JMS Adapter", and it says only SimpleXML can be converted in the receiver channel.
I had hoped for a solution at least as good as in the File/ftp adapter, where complex XML can be transformed to files.
Are there plans to include complex XML conversion in the JMS adapter?
I can not use the file adapter as I need to change the file name and destination, and that can not be done by adding own module to its single module.
Any idea how I can achieve what I want?
To only way I can find, is to create a file using the file/ftp adapter, and then pick it up again and treat all the lines as the same structure (one row = one xml field). Then output this new xml message to file, using the JMS adapter and add any modules with name and destination determination.
Appreciate any help!
Regards,
Oeystein Emhjellen

Hello,
Have you tried to use an XSLT mapping within the IE?
I have, at one customer site, created a XSLT message mapping which converts the XML to a fixed length ASCII file format. I than added the XSLT message mapping as a second mapping step on the interface mapping.
In this case I was able to publish a fairly complex fixed length file format to MQ Series via the JMS adapter.
/Johan

Esb parallel processing problems with jms adapter and bpel

Hi,
I have esb project which dequeues from a jms adapter and then the esb router calls a bpel process. This bpel process takes about 10 seconds. The first step this bpel does is to return true ( to the client) to the esb router so the ESB thinks he is ready. This does not work.
Now if I use in the esb router asyn routing rule to the bpel ws then the esb dequeus all the messages from the queue. All the esb entries are green. But the esb starts one for one the bpel process and then updates the esb entry with a new start time ( very strange) .
If I use a sync routing rule then it dequeues and call the bpel process one for one.
How I can parallel proces the jms messages ,because I have 2 quad cores cpu's . Async routing rules looks like the solution.
How can the esb detects the bpel is still running even with the first action in bpel is to return true. I expected when the esb retrieves true from the bpel ws it ends the current esb entry and goes on with the next. So the total esb time takes a few seconds and not so long as the last the bpel proces finishes.
And why is he updating the starting time.
Thanks Edwin
Message was edited by:
biemond

I have esb project which dequeues from a jms adapter
and then the esb router calls a bpel process. This
bpel process takes about 10 seconds. The first step
this bpel does is to return true ( to the client) to
the esb router so the ESB thinks he is ready. This
does not work. I am not sure if it can ever work, if you reply and then still proceed with your BPEL process.
Here is something I would like to suggest:
Can you try ESB -- (sync) --> BPEL, where BPEL process itself is Async. In that case, esb will consume all the messages very fast and BPEL will get that message and put in Delivery Queue and reply back to ESB. Now BPEL will process them simultaniously based Receiver/Worker threads defined in your env.
HTH,
Chintan

Receiver JMS Adapter Content Conversion issue

Scenario :
R/3 -->XI -->MQ(XML2Plain)
Hi
We are using Receiver JMS Adapter to send the Message from XI to MQ.
The XML has to be converted to plain file. And Content conversion is
being done.
With the new development, the message type defined consist of 8 fields
with fixed length. The XML message goes successfully from XI to MQ
without any content conversion. But once simple content conversion is
being done for Receiver JMS adapter, even though the message is
received but its empty (without any data records). The adapter
monitoring everything seems fine and it gives the status that message
converted to binary and the message is delivered to MQ. Though on
checking the messages there is no data records.
Below is my content conversion configuration done in Module tab. Kindly
revert back what can be the problem as have done exactly the same way
as described in Content Conversion How to Guide for receiver JMS.
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService Local Enterprise Bean exit
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain TransformContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.addHeaderLine SimpleXML2Plain
XML2Plain xml.fieldFixedLengths 8,10,10,20,40,40,8,8
XML2Plain xml.fixedLengthTooShortHandling Cut
regards.
santosh.

Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla..

JMS Adapter Content conversion using Webspear MQ

Hi All,
I have a scenario where I have to pick a flat file from WebSpear JMS Q.In turn I should convert flat structure into xml structure to parse to the RFC structure(YOTCS_I090_INV_S) and map to the traget structure.
Below is the Source structure:
Messages
->Message1
-->YOTCI_I090_INV_SYNC
--->YOTCS_I090_INV_SYNC
>item
>ZDATE
>TIME
>TZONE
>WERKS
>MATNR
>LGORT
>CHARG
>SOBKZ
>INSMK
>LIFNR
>ZMENGE
>ZMEINS
>LOT_NUMBER
>CODE_DATE
Source file look's as below:
YOTCS_I090_INV_S                                                                                4928
YOTCS_I090_INV_S                                                                                3
YOTCS_I090_INV_S                                                                                3
YOTCS_I090_INV_S                                                                                1
I am doing the file contact conversion as below in JMS Adapter:
Module Key      ParameterName                           ParameterValue
Plain2XML        Transform.Class                           com.sap.aii.messaging.adapter.Conversion
Plain2XML        Transform.ContentType                 text/xml;charset=utf-8
Plain2XML        xml.conversionType                      StructPlain2XML
Plain2XML        xml.documentName                      YOTCI_I090_INV_SYNC
Plain2XML        xml.documentNamespace            urn:sap-com:document:sap:rfc:functions
Plain2XML        xml.item.fieldFixedLengths           8,8,6,4,18,4,10,1,1,10,13,3,10,8
Plain2XML        xml.item.fieldNames ZDATE,TIME,TZONE,WERKS,MATNR,LGORT,CHARG,SOBKZ,INSMK,LIFNR,ZMENGE,ZMEINS,LOT_NUMBER,CODE_DATE
Plain2XML        xml.processFieldNames             fromConfiguration
Plain2XML        xml.recordsetStructure               item,*
Can any one help me in configuring the Content conversion? Hope you got my issue.
Thanks in Advance.
Best Regards,
Jose

Joseph,
Go thru the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Cheers
Agasthuri Doss

JMS Adapter - data conversion xml- structured data has extra characters

Further to [Using MQ / JMS adapter with legacy system to talk to SAP;, I am using the Module tab on my receiver JMS Adapter to convert the xml payload to a structured format. It converts to the mainframe ebcdic code set. I am on PI 7.11, and the MQ Series (which JMS interacts with) is 6.0. The code I have is comparable to the wiki:[http://wiki.sdn.sap.com/wiki/display/XI/HowTo...ContentconversionmodulewithJ2EEJMS+adapter], i.e. the example at the very bottom of that article.
The issue we are having is that an extra character gets inserted at the end of each structure (within the message), i.e. our message contains 4 structures, but when we view the structured data on our mainframe system (that arrives from PI), the entire message is shifted by 4 characters... by 1 after the end of each structure. On the mainframe, this extra character appears as '.'. It must be an end-of-line or something...
Has anyone had the same issue? If so, were you able to resolve? I could probably set up my message data type to just be one big declare (thus eliminating the use of structures within it), but that is something I'd rather not do.
We are in the process of reviewing Note 856346, #6 but not sure if it applies.
Regards,
Keith

Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla..

JMS Adapter binary conversion error

I am getting an MQ message. The message has / embedded when it is picked by JMS Adapter. Because the message content has /, JMS is stripping the message. Is there anyway to get the whole message into XI from JMS without the message getting stripped.
the error message is below
Error while processing message '3c698d81-983c-4d3c-2272-cb505bbd3e4a'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in converting Binary message 1193200ST20080509110023912134297100239120000DI2SAPDVDIROUTI7080509110023912 EDI00000        INITAREQDI2SAPDVBNSF           EBSTMNT 120886882PNCBANK        I N01                                      Y 01,043000096,FORTE,080422,0830,01,80,80,2/                                       02,RCVR,043000096,1,080422,0830,USD,/                                           03,1019283631,USD,030,28192752,,,060,28192752,,,072,000,,,074,000,,/
Edited by: developer on Jul 1, 2008 9:55 PM

hi folks i have resolved that issue it was mapping change...
Now i'm facing another problem .. I m gettin only header record but i don see me items...
my structure is like this field fixed length
HEADER ( 1 )
OrderDetail(Min - 1 and Max - Unbounded)
Trailer(Min - 1 and Max - Unbounded)
configuration of my JMS adapter :
Transform.Class                              :com.sap.aii.messaging.adapter.Conversion
Transform.ContentType                 :text/xml;charset=utf-8
xml.conversionType                      :StructPlain2XML
xml.processFieldNames                :fromConfiguration
xml.documentName                     : MyDocument
xml.documentNamespace           : http://xi.com/test
xml.recordsetStructure               : Header,1,OrderDetail,,Trailer,
xml.recordsetName                     : Dataset
xml.Header.keyFieldName            :abc
xml.Header.keyFieldValue            :x1
XML xml.keyFieldType                 :CaseSensitiveString
xml.Header.fieldFixedLengths     :1,2,3..
xml.Header.fieldNames                :abc,cde,fgh...
Similarly for order and trailer
Kindly help in this regard.. i was not able to find in search

How to get the incoming file name using JMS adapter and SOAP adapter

Hi Everybody,
   In one of my interface i need to get the file name of incoming flat file using JMS adapter at sender side. and then i am using xslt to convert it to IDOC and then posting to SAP IDOC.
my incoming filname are in this form price<DateTimestamp>.txt. when i do the tranformation this incoming file name should be part of one element in the IDOC which i am posting.
EX:
<IDOC
<REF>price<DateTimestamp>.txt</REF>
</IDOC>
Hope it is clear to everybody. I need your suggestion how i can capture this incoming file name and send it as part of IDOC.
Thanks
raj

If they are passing it in message id or correlation id,
you can access it using
<xsl:variable name="dynamic-conf"
        select="map:get($inputparam, 'DynamicConfiguration')" />
    <xsl:variable name="dynamic-key"
        select="key:create('http://sap.com/xi/XI/System/JMS', 'DCJMSMessageID/ DCJMSCorrelationID')" />
    <xsl:variable name="dynamic-value"
        select="dyn:get($dynamic-conf, $dynamic-key)" />
Check this:
http://help.sap.com/saphelp_nw70/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Thanks,
Beena.

JMS Adapter Content Conversion

Hi,
I am looking for some help on JMS Receiver content conversion, to put a delimited file on MQ series queue.
I tried the below link, but not able to access the document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use the content conversion module with the xi 3 j2ee jms adapter
If anyone has a copy of the pdf document on JMS content conversion, could you please email it to me at my id : [email protected]
Rgds
R Chandrasekhar

I had send the required PDF
Regards
Arpit seth

JMS adapter and BPM

Hi.,
I would like to know if it is possible to use SAP XI3.0 BPM and JMS Adapter for synchronous messaging? Scenario is like this: webapplication-->MQ Series --> xi ---> database. And in reponse message we got to have MessageID, Correlation ID and Reply to Queue name and Queue name Manager. If we could do this, can anyone share some informatino on this topic. From my knowledge i would say yes, but i would like to know exact approach(BPM steps, Configuration steps).Thanks for your time.
Thanx&Regards
Indra

Hi,
Go thru following Weblogs:
1.Walkthrough with BPM:- /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
2./people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
3./people/ravikumar.allampallam/blog/2005/02/17/bridging-the-sync-async-bridge-with-fork-xi
4.https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Hope this helps...
Regards,
Moorthy

JMS adapter and Websphere MQ availability issue

Hi,
My customer uses XI 3.0 and JMS adapter to communicate with WS MQ.
They have several MQ Server instances in separate physical machines, for availability purpose.
the intention is, in case of MQ Server failover, the secondary MQ Server try to connect with the XI-JMS adapter.
The question is:
Is this mechanism possible in an automatic way or is it needed some manual process or configuration of JMS adapter?. Also, is there any alternative more recommendable from the SAP XI adapter point of view?
Thanks in advance,

Thanks Bhavesh and Satya,
Very helpful your answers.
I have another question related with XI and JMS adapter. The scenario is several MQ nodes in separate physical machines sending and receiving messages to/from the same XI-JMS adapter (centralized).
Is this supported by XI-JMS adapter confguration? If not, does anybody knows an alternative way to implement it?
Thanks again in advance,

The message sequence of JMS adapter and BPM

This is my scenario: AP1 -> MQ -> JMS Adapter -> XI BPM -> SAP
But if AP1 sends 10 messages to MQ server, how to make sure the received message sequence of SAP is the same as AP1 ?
Because JMS adapter doesn't have synchronous ability, or I can set best effort to make sure the sequence.

HI,
See the below links to solve the BPM performance problems
BPM Performance tuning
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
BPM performance question
SAP XI BPM Performance and statistics
Performance problem on BPM
BPM pros and cons
Performance problems using BPM
Regards
Chilla..

Scenarios using Sender JMS adapter and Reciver JMS adapter

Hi All,
I am not able to find god step by step blog on senderJMS adapter and Receiver JMS adapter.
also please explain when we use JMS.What does a messng system means?please provide some examples.
Thanks and regards

Hi Goyal,
Messaging System :
Messaging system allows separate, uncoupled applications to reliably communicate asynchronously. The messaging system architecture generally replaces the client/server model with a peer-to-peer relationship between individual components, where each peer can send and receive messages to and from other peers.
Go thru this you will get better idea :
http://java.sun.com/developer/technicalArticles/Networking/messaging/
JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK.
regards
Ganga

Receiver JMS adapter content conversion

Hi All,
Can anyone provide me guidelines on how to do content conversion for the receiver JMS adapter??
Thx
Navin

Hi,
Based on your structure , you need to configure the JMS CC parameters.
see the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
regards
Chilla

Mail attachment and conversion agent

Hey guys,
Is there a way to parse e-mail attachments usign a converion agent module
added to the e-mail sender adapter in "one step" ?
e.g. not doing mail->file and then file(CM module)->XI.
Regards,
Nimrod.G

Hi nirmod,
Refer these links
The specified item was not found. - sending mail attachments
The specified item was not found.
and also check this article
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regards,
Suryanarayana

JMS Adapter and Conversion Agent

Similar Messages

Maybe you are looking for