JMS Adapter binary conversion error
I am getting an MQ message. The message has / embedded when it is picked by JMS Adapter. Because the message content has /, JMS is stripping the message. Is there anyway to get the whole message into XI from JMS without the message getting stripped.
the error message is below
Error while processing message '3c698d81-983c-4d3c-2272-cb505bbd3e4a'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in converting Binary message 1193200ST20080509110023912134297100239120000DI2SAPDVDIROUTI7080509110023912 EDI00000 INITAREQDI2SAPDVBNSF EBSTMNT 120886882PNCBANK I N01 Y 01,043000096,FORTE,080422,0830,01,80,80,2/ 02,RCVR,043000096,1,080422,0830,USD,/ 03,1019283631,USD,030,28192752,,,060,28192752,,,072,000,,,074,000,,/
Edited by: developer on Jul 1, 2008 9:55 PM
hi folks i have resolved that issue it was mapping change...
Now i'm facing another problem .. I m gettin only header record but i don see me items...
my structure is like this field fixed length
HEADER ( 1 )
OrderDetail(Min - 1 and Max - Unbounded)
Trailer(Min - 1 and Max - Unbounded)
configuration of my JMS adapter :
Transform.Class :com.sap.aii.messaging.adapter.Conversion
Transform.ContentType :text/xml;charset=utf-8
xml.conversionType :StructPlain2XML
xml.processFieldNames :fromConfiguration
xml.documentName : MyDocument
xml.documentNamespace : http://xi.com/test
xml.recordsetStructure : Header,1,OrderDetail,,Trailer,
xml.recordsetName : Dataset
xml.Header.keyFieldName :abc
xml.Header.keyFieldValue :x1
XML xml.keyFieldType :CaseSensitiveString
xml.Header.fieldFixedLengths :1,2,3..
xml.Header.fieldNames :abc,cde,fgh...
Similarly for order and trailer
Kindly help in this regard.. i was not able to find in search
Similar Messages
-
JMS Adapter and Conversion Agent
Hi,
Has anyone worked on JMS adapter and Conversion module? JMS adapter is working fine without the conversion agent module.
processing sequence is as follows
1 SAP XI JMS Adapter/ConvertJMSMessageToBinary Local Enterprise Bean convert_JMS2Bin
2 SAP XI JMS Adapter/ConvertBinaryToXMBMessage Locl Enterprise Bean convert_Bin2XI
3 sap.com/com.sap.nw.cm.xi/CMTransformBean Local Enterprise Bean 0
4 CallSapAdapter Local Enterprise Bean call_AF_MS
Also I have given the Parameter Name and value.
Let me know if i am missing something.I have done the configuration in sender JMS channel. I even created file sender and it is not working.
when i went and checked the initialization events in http://xxxx:50000/CMViewer, I can see some errors under service Initialization. -
JMS sender adapter content conversion error
Hi,
Kindly find the error report from MONI.. and have followed this document for sender JMS content configuration
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_NFEIN_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
<SAP:P3>Content is not allowed in prolog.</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_NFEIN_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>hi folks i have resolved that issue it was mapping change...
Now i'm facing another problem .. I m gettin only header record but i don see me items...
my structure is like this field fixed length
HEADER ( 1 )
OrderDetail(Min - 1 and Max - Unbounded)
Trailer(Min - 1 and Max - Unbounded)
configuration of my JMS adapter :
Transform.Class :com.sap.aii.messaging.adapter.Conversion
Transform.ContentType :text/xml;charset=utf-8
xml.conversionType :StructPlain2XML
xml.processFieldNames :fromConfiguration
xml.documentName : MyDocument
xml.documentNamespace : http://xi.com/test
xml.recordsetStructure : Header,1,OrderDetail,,Trailer,
xml.recordsetName : Dataset
xml.Header.keyFieldName :abc
xml.Header.keyFieldValue :x1
XML xml.keyFieldType :CaseSensitiveString
xml.Header.fieldFixedLengths :1,2,3..
xml.Header.fieldNames :abc,cde,fgh...
Similarly for order and trailer
Kindly help in this regard.. i was not able to find in search -
Receiver JMS Adapter Content Conversion issue
Scenario :
R/3 -->XI -->MQ(XML2Plain)
Hi
We are using Receiver JMS Adapter to send the Message from XI to MQ.
The XML has to be converted to plain file. And Content conversion is
being done.
With the new development, the message type defined consist of 8 fields
with fixed length. The XML message goes successfully from XI to MQ
without any content conversion. But once simple content conversion is
being done for Receiver JMS adapter, even though the message is
received but its empty (without any data records). The adapter
monitoring everything seems fine and it gives the status that message
converted to binary and the message is delivered to MQ. Though on
checking the messages there is no data records.
Below is my content conversion configuration done in Module tab. Kindly
revert back what can be the problem as have done exactly the same way
as described in Content Conversion How to Guide for receiver JMS.
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService Local Enterprise Bean exit
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain TransformContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.addHeaderLine SimpleXML2Plain
XML2Plain xml.fieldFixedLengths 8,10,10,20,40,40,8,8
XML2Plain xml.fixedLengthTooShortHandling Cut
regards.
santosh.Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla.. -
Complex XML to Plain in JMS adapter "Content conversion module"
Hi!
I have read the document on "How To use the content conversion module with XI3.0 J2EE JMS Adapter", and it says only SimpleXML can be converted in the receiver channel.
I had hoped for a solution at least as good as in the File/ftp adapter, where complex XML can be transformed to files.
Are there plans to include complex XML conversion in the JMS adapter?
I can not use the file adapter as I need to change the file name and destination, and that can not be done by adding own module to its single module.
Any idea how I can achieve what I want?
To only way I can find, is to create a file using the file/ftp adapter, and then pick it up again and treat all the lines as the same structure (one row = one xml field). Then output this new xml message to file, using the JMS adapter and add any modules with name and destination determination.
Appreciate any help!
Regards,
Oeystein EmhjellenHello,
Have you tried to use an XSLT mapping within the IE?
I have, at one customer site, created a XSLT message mapping which converts the XML to a fixed length ASCII file format. I than added the XSLT message mapping as a second mapping step on the interface mapping.
In this case I was able to publish a fairly complex fixed length file format to MQ Series via the JMS adapter.
/Johan -
JMS Adapter Content Conversion
Hi,
I am looking for some help on JMS Receiver content conversion, to put a delimited file on MQ series queue.
I tried the below link, but not able to access the document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use the content conversion module with the xi 3 j2ee jms adapter
If anyone has a copy of the pdf document on JMS content conversion, could you please email it to me at my id : [email protected]
Rgds
R ChandrasekharI had send the required PDF
Regards
Arpit seth -
JMS Adapter Content conversion using Webspear MQ
Hi All,
I have a scenario where I have to pick a flat file from WebSpear JMS Q.In turn I should convert flat structure into xml structure to parse to the RFC structure(YOTCS_I090_INV_S) and map to the traget structure.
Below is the Source structure:
Messages
->Message1
-->YOTCI_I090_INV_SYNC
--->YOTCS_I090_INV_SYNC
>item
>ZDATE
>TIME
>TZONE
>WERKS
>MATNR
>LGORT
>CHARG
>SOBKZ
>INSMK
>LIFNR
>ZMENGE
>ZMEINS
>LOT_NUMBER
>CODE_DATE
Source file look's as below:
YOTCS_I090_INV_S 4928
YOTCS_I090_INV_S 3
YOTCS_I090_INV_S 3
YOTCS_I090_INV_S 1
I am doing the file contact conversion as below in JMS Adapter:
Module Key ParameterName ParameterValue
Plain2XML Transform.Class com.sap.aii.messaging.adapter.Conversion
Plain2XML Transform.ContentType text/xml;charset=utf-8
Plain2XML xml.conversionType StructPlain2XML
Plain2XML xml.documentName YOTCI_I090_INV_SYNC
Plain2XML xml.documentNamespace urn:sap-com:document:sap:rfc:functions
Plain2XML xml.item.fieldFixedLengths 8,8,6,4,18,4,10,1,1,10,13,3,10,8
Plain2XML xml.item.fieldNames ZDATE,TIME,TZONE,WERKS,MATNR,LGORT,CHARG,SOBKZ,INSMK,LIFNR,ZMENGE,ZMEINS,LOT_NUMBER,CODE_DATE
Plain2XML xml.processFieldNames fromConfiguration
Plain2XML xml.recordsetStructure item,*
Can any one help me in configuring the Content conversion? Hope you got my issue.
Thanks in Advance.
Best Regards,
JoseJoseph,
Go thru the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Cheers
Agasthuri Doss -
JMS Adapter - data conversion xml- structured data has extra characters
Further to [Using MQ / JMS adapter with legacy system to talk to SAP;, I am using the Module tab on my receiver JMS Adapter to convert the xml payload to a structured format. It converts to the mainframe ebcdic code set. I am on PI 7.11, and the MQ Series (which JMS interacts with) is 6.0. The code I have is comparable to the wiki:[http://wiki.sdn.sap.com/wiki/display/XI/HowTo...ContentconversionmodulewithJ2EEJMS+adapter], i.e. the example at the very bottom of that article.
The issue we are having is that an extra character gets inserted at the end of each structure (within the message), i.e. our message contains 4 structures, but when we view the structured data on our mainframe system (that arrives from PI), the entire message is shifted by 4 characters... by 1 after the end of each structure. On the mainframe, this extra character appears as '.'. It must be an end-of-line or something...
Has anyone had the same issue? If so, were you able to resolve? I could probably set up my message data type to just be one big declare (thus eliminating the use of structures within it), but that is something I'd rather not do.
We are in the process of reviewing Note 856346, #6 but not sure if it applies.
Regards,
KeithHi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla.. -
Receiver JMS adapter content conversion
Hi All,
Can anyone provide me guidelines on how to do content conversion for the receiver JMS adapter??
Thx
NavinHi,
Based on your structure , you need to configure the JMS CC parameters.
see the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
regards
Chilla -
Receiver JMS Adapter Communication channel Error
Hi Experts,
The Error is given below
Cannot connect because class 'com.ibm.mq.jms.MQQueueConnectionFactory' is missing: ensure that JMS Provider library 'aii_af_jmsproviderlib.sda' contains all required resources.
when i searched SDN , i found the MQ JMS Library need to deployed in XI/PI . For clarification check SAP NOTE 1138877 is given .
What should I do ?
pls advice
Regards,
JudeHello Experts,
I am encountering the same error that you faced. I am using PI 7.0 and MQ adapter 6.0. I would like to know where to get the following jar files:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
I know that I am supposed to add the above files to aii_af_jmsproviderlib.sda on the PI server. As I not a basis person, it'll be great if you could direct me to some detailed instructions. I am trying to follow SAPNote: 747601.
Please correct me if I am wrong.
Thanks,
Bhanu. -
JMS Adapter Frame Work Error - No Alert
Hi All,
We have configured Alert Frame Work in Development and it is working fine .
Only issue with Adapter Frame work I am able to catch all the errors in File adapter like
wrong directory, FTP errors and No sender agreement but for JMS Communication channel
when the queue is down or wrong parameters to connect then CC is showing errors in RWB
but I am not getting any alerts even when there is no filter.
I could not understand why , can u throw some light.
Thanks and Regards
KLK
Message was edited by:
K.L.KHi KLK
I am having same issue. Did you solve this issue. If yes, Can you let me know what would have been wrong in settings.
Thanks
Chri -
Receiving the below error, thought of JMS Drivers problems undeployed and re-deployed several times, but still problem persist in XI.
Success MP: Processing local module localejbs/SAP XI JMS Adapter/ConvertMessageToBinary
2010-09-09 11:45:21 Error MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.
2010-09-09 11:45:21 Error Exception caught by adapter framework: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.
Error Delivery of the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary..
2010-09-09 11:45:22 Success The message status set to WAIT.
2010-09-09 11:45:22 Success The asynchronous message was successfully scheduled to be delivered at Thu Sep 09 11:50:21 CDT 2010.
The JNDI Libraries are available in Visual Admin, not sure what else causing the issue. Any guru's help is appreciatedXI 3.0 SP20
Regarding the note, that only applied below sp4. We are on SP20. The default values appears but those are not working.This seems to be a problem with Dev only, Q and P is working fine at this moment
If i actually delete module processor's from Sender and Receiver channel, things are working fine. But not sure if it is going to break anything. And this needs to be applied in all landscape. But i have to present a reason, why this weird behavior all of a sudden
Sender
SAP XI JMS Adapter/ConvertJMSMessageToBinary
SAP XI JMS Adapter/ConvertBinaryToXMBMessage
Receiver
SAP XI JMS Adapter/ConvertMessageToBinary
SAP XI JMS Adapter/SendBinarytoXIJMSService -
Content Conversion in JMS Adapter
Hi All,
I am having a scenario JMS - XI - JDBC.
Now I have to do the content conversion in the incming records.
The sample incoming data is as follows:-
<Field1>,<Field2>, ...,<Fieldn> -->Row1
{<Field1A>,<Field2A>, ...,<FieldnA>} -->Row2
{<Field1A>,<Field2A>, ...,<FieldnA>} -->Row3
<Field1B>,<Field2B>, ...,<FieldnB> -->Row4
{<Field1C>,<Field2C>, ...,<FieldnC>} -->Row5
{<Field1C>,<Field2C>, ...,<FieldnC>} -->Row6
{<Field1C>,<Field2C>, ...,<FieldnC>} -->Row7
Now at the target, we have 3 oracle tables, in which the data from the Row1 &4 will go to Table 1, Row2&3 --> Table2 and Row5,6 &7 --> Table3.
The source data type that i m using is of the structure:-
<TC>
<GT>
<Field1>
<GS>
<Field1A>
</GS>
<Field1B>
<Field2B>
<GDS>
<Field1C>
</GDS>
</GT>
</TC>
Please help me out in the modules configuraton, how this can be handled.
Thanks in advance, hope to receive some solution at the earliest.
Rocky.Hi Rocky,
Please have a look at these threads..
JMS Adapter: Content Conversion
JMS Adapter Content Conversion
JMS Content Converrsion
Hope these help you!
cheers,
Prashanth -
Problem with special character like u00E5,u00E4 u00F6 in Sender JMS Adapter
Hi,
Problem:
Sender JMS Adapter has transformation error when the file includes western european characters such as å,ä ö. And because of this reason the data is not picked up by adapter.
The scenrio is JMS --- > XI ---> Proxy.
If the file does not include the western European characters then it is working fine, but when the file include the western european characters such as å, ä, ö so got the error.
Our Efforts:
We have tried ISO8859-1 in JMS Module Tab as shown below.
1. Transfer.ContentType text/xml;charset=ISO-8859-1
AND with this also
2. Transfer.ContentType application/coctet-stream;charset=ISO-8859-1
None of them working.
Error In CC:
In Sender CC monitoring we are getting the below error.
Error while processing message 'aa157082-b064-4421-0fc3-c286d2732093'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error converting Message: sun.io.MalformedInputException: TransformException: Error converting Message: 'sun.io.MalformedInputException' at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java(Compiled Code)) ...
Any suggestion in this regard will be a great help.
Regards,
Sarvesh> I think you have to figure out first, which codepage you really have, not just try. Maybe you ask someone or you check with a hex editor.
Hi Stefan,
Finally we solved the problem.
As you said above to figure the the codepage, we asked to our MQ team for the same and found that they are using ISO-8859-1. In XI we were also trying with multiple conbinations (ISO-8859-1, UTF-8 and many more), but didn't get any success.
Finally MQ team changed their encoding to UTF-8 and in XI we used ISO-8859-1 and we get the success in picking the data with spl char. Even though in XI the spl char comes in destorted order but at the receiver end they are in proper shape.
Thanks a lot for your help.
Regards,
Sarvesh -
Sender JMS Adapter - NOT Working
Hello Everybody - We are on SP13, also installed JMS Driver files on the system. We are running, Central Adapter Engine.
We configured the Sender JMS Adapter for WBI MQ->XI->SAP scenario. We need to JMS Adapter to be configured to connect to WBI from XI. Everything looks great in configuration but in the Adpater Monitoring, JMS Adapter is with Error Status and Message says "Sender channel. Details: (No detail information set.)".
Does anybody has any idea about this error ?
I checked SAP Help link as well on this. Based on this link http://help.sap.com/saphelp_nw04/helpdata/en/ca/e7673c86d19b35e10000000a11402f/frameset.htm. Do we need to configure this JMS Adapter somewhere on teh server as well ? If yes, then where ? Pls respond if you have any clue about it.
Thanks in anticipation...Hello Stefan - Thanks for response.
Here are the Parameters.......
Adapter Type: JMS
Sender Type Clicked
Transport protocol:WebSphereMQ (non-JMS)
Message protocol:JMS 1.x
Adapter Engine:Integration Server
Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class:com.ibm.mq.jms.MQQueue
IP Address or Server Name:10.9.48.154
Server Port:1414
Queue Manager Name:WBIDEV
Channel Name:WBI.XI.SVRCONN
JMS Queue:XI_REQUEST
Transport/Network Protocol:TCP/IP
JMS-Compliant:JMS-Compliant
Transactional JMS Session:Check box Set
JMS Queue User:XIUSER
JMS Queue Password:********
Set XI message ID(MessageID) to:GUID(recommended value)
Set XI cenversation ID(conversationID) to:No value
Mapping of Message:Message Payload=JMS Payload
Quality of Service:Exactly Once
Time Period for duplicate check for EO(IO)(secs):86400
Wait After Message Error(msecs):1000
Wait before Reconnect(msecs):1000
Status:Active
The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
Pls advice If I am missing anything ?
Thanks....
Amrish.
Maybe you are looking for
-
AE CC crashes on certain project
Been working on a project since about 8 pm (currently 12:32 am) when suddenly, after effects CC 2014.1.1, crashed. Nothing else than a "program not responding" window popped up. I decided alright no biggie and went back to work on it. It crashed even
-
AMT 3.2.10 Clients with SCCM 2012 on Windows 2012
Hey I have a couple of HP dc7800 computers with Intel's AMT/vPro that I'd like to provision with SCCM 2012. The installed firmware version is 3.2.10 which is a supported version according to the documentation [1]. Provisioning of newer clients (5.2.x
-
WMTA output type not determining in outbound delivery
Hi, Im in is-retail we are using lean WM for automatic transfer order creation, recently we made immediate delivery also, after this auto TO is not creating and WMTA output type also not determining in delivery. pls help me any body why out put typ
-
Good Receipt Reversal using Idoc WMMBXY
Hi to all, I've the following issue in a 4.6C R/3. I want to reverse a Goods Receipt from Purchase Order (MB01; goods movement 102) using inbound idoc WMMBXY. When I try to reverse some quantity in the PO of a material position without batch, there's
-
My iPad is connected to my computer, but it still will not download newly purchased apps. It is prompted me to connect to itunes or use a wifi setting (which I do nto currently have). What can I do?