JMS with TomCat ? how to configure or install JMS

i am new to JMS i dont know how to configure JMS.I have copied ths javax.jms.jar and jms.jar in JDK1.4 directories like ../lib, jre/lib etc. also set the classpaths but i cant compile a simple file error saya no package found. can anyone help me please ???? webserver i am using is tomcat. tell me the solution step wise please be soon thakyou again. in advance ;)

when you say classpaths, you mean you added ../lib/jms.jar to your class path. that is you explicitly put the jar file in your path and it won't compile?
_sjz.

Similar Messages

How to use JMS with tomcat and Axis

Hello
I'm new in ii, so i'm still a little bit lost. I have been implementing web services with tomcat and Axis. However, these services are synchronous and I would like that some services were asynchronous.
I've been reading about the topic and I've found that JMS is a good solution for it. I have already downloaded JMS in my computer but now I don't know what else to do. I've been trying to run the SimpleQueueSender.java example but I get the error:
JNDI API lookup failed: javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
But I have attached all .jar from F:\Sun\MessageQueue\lib
In addition to this, for my first webservices I used the Java2WSDL, WSDL2Java and AdminClient (axis tool) to create my web services bindings, stubs and skeletons and to deploy the web service on the server. Do I have to use them now with JMS? or now the deployment must be performed in a different way?
Thank you in advanced,

The error means that you have to specify the type and location of your jndi store. You could create a jndi.properties file and put two properties in it:
java.naming.provider.url=file\\\:////var/jndi
java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory
for a file based jndi store. Then you have to make sure your jndi.properties file is in your CLASSPATH. Then you have to use something like imqadmin to create your jndi store and store in it your administrative objects like Queues and QueueConnectionFactories.

How to configure and install the IPC??

Hello All
I am working on CRM 7.0 with integration to ECC 6.0, I have variants for configurable products in the ERP and I want to use them in CRM orders so I have to use the IPC but I donu2019t know how to configure the IPC and is it to be installed on a separate server or it is just a tool to be activated on CRM or ECC system
Regards
Jacopo Francoise

Hi
You can refere this link, I believe it will help you alot.
[http://help.sap.com/saphelp_crm40/helpdata/en/1d/89b6dbf5c02a44af7b1ff8bfd48c35/frameset.htm]http://help.sap.com/saphelp_crm40/helpdata/en/1d/89b6dbf5c02a44af7b1ff8bfd48c35/frameset.htm
Regards
Naeem

How to configure a full JMS Sender Adapter Scenario

Hi guys,
I have to do a JMS -> PI (7.1) -> File scenario, I never used JMS Adapter, and I'd like to tell you what I have done, and what I think is missing.
First I went to the NetWeaver Administrator ->Configuration Management ->Infrastructure ->JMS Server Configuration-> Create ->JMS Queue.. and I created a new Queue from a Virtual Provider (SAP JMS Provider).
The first thing I didn't know how to configure it is which transport protocol I have to choose in the CC adapter (SonicMQ JMS Provider, WebSphere MQ, etc..)
But I also don't know is if there's something missing on the NWA, to create, modify, etc. I read this slide: (https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0) where was shown how to create a SAP standard queue, and I also read all the documentation from help.sap.com (all the JMS basics and explanation) but I still don't know how to fully configure the CC and how to trigger the messages.
Please, if you need further information I can give it.
Thanks in advance.
Juan

Hi,
did you try this blog from William?
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Regards,
Michal Krawczyk

How toremove messages from JMS Queue?how to configure queue in spring?

Hi
I have Confiured a JMS configaration in spring applicationConfiguaration.xml file
<bean id="connectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
          <property name="brokerURL" value="tcp://localhost:61616"/>
          <property name="useAsyncSend" value="true"/>
     </bean>
     <bean id="queue" class="org.apache.activemq.command.ActiveMQQueue">
     <constructor-arg value="foo"/>
</bean>
     <bean id="broker" class="org.apache.activemq.xbean.BrokerFactoryBean">
          <property name="config" value="classpath:activemq.xml" />
          <property name="start" value="true" />
     
     </bean>
     <bean id="auditInterface"
          class="org.springframework.jms.remoting.JmsInvokerProxyFactoryBean">
<property name="serviceInterface" value="com.infiniti.gpn.auditing.AuditInterface"/>
<property name="connectionFactory" ref="connectionFactory"/>
<property name="queue" ref="queue"/>
</bean>
     <bean id="listenerContainer" class="org.springframework.jms.listener.SimpleMessageListenerContainer">
<property name="connectionFactory" ref="connectionFactory"/>
<property name="destination" ref="queue"/>
<property name="messageListener" ref="auditMessageListener"/>
     </bean>
Sender is sedning messages continusly messages that messages r storing in queue , these r acupying more memory in RAM , due to that jboss is restarting for each request, is there any way to clean up messages in Queue ? if it is there then how will configure that queue in apllicationConfiguaration.xml file?
Thanks in advance
Nara

I suggest posting your question on the [Spring Remoting and JMX forum|http://forum.springframework.org/forumdisplay.php?f=30].

How to remove messages from JMS Queue?how to configure queue in spring?

Hi
I have Confiured a JMS configaration in spring applicationConfiguaration.xml file
<bean id="connectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<property name="brokerURL" value="tcp://localhost:61616"/>
<property name="useAsyncSend" value="true"/>
</bean>
<bean id="queue" class="org.apache.activemq.command.ActiveMQQueue">
<constructor-arg value="foo"/>
</bean>
<bean id="broker" class="org.apache.activemq.xbean.BrokerFactoryBean">
<property name="config" value="classpath:activemq.xml" />
<property name="start" value="true" />

</bean>
<bean id="auditInterface"
class="org.springframework.jms.remoting.JmsInvokerProxyFactoryBean">
<property name="serviceInterface" value="com.infiniti.gpn.auditing.AuditInterface"/>
<property name="connectionFactory" ref="connectionFactory"/>
<property name="queue" ref="queue"/>
</bean>
<bean id="listenerContainer" class="org.springframework.jms.listener.SimpleMessageListenerContainer">
<property name="connectionFactory" ref="connectionFactory"/>
<property name="destination" ref="queue"/>
<property name="messageListener" ref="auditMessageListener"/>
</bean>
Sender is sedning messages continusly messages that messages r storing in queue , these r acupying more memory in RAM , due to that jboss is restarting for each request, is there any way to clean up messages in Queue ? if it is there then how will configure that queue in apllicationConfiguaration.xml file?
Thanks in advance
Nara

Hi,
Even i have a similar kind of requirement where in, i want to clear the JMS Queue Message programmatically, on certain condition.
i am using Spring JMS. The JMS Queue has a listener. In the listener we want to clear the Queue contents based upon the condition.
If anybody has any idea about this, please reply back.
Thanks in Advance.
Manjunath.

Jms with tomcat

hi everybody
anybody can help me
i am getting follwing error when i am trying to use jms in tomcat
javax.naming.NameNotFoundException: jms not bound
at org.jnp.server.NamingServer.getBinding(NamingServer.java:491)
at org.jnp.server.NamingServer.getBinding(NamingServer.java:499)
at org.jnp.server.NamingServer.getObject(NamingServer.java:505)
at org.jnp.server.NamingServer.lookup(NamingServer.java:249)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
thanks in advance

hi,
Same topic discuss in another forums,
http://www.jbossfaq.com/mvnforum/mvnforum/viewthread?thread=81try this link

How to configure for remote JMS client?

I have my own Java JMS test program for performance measurements.
          I am using the JNDI and JMS provider functionality of the WebLogic 9.1 app-server but my test program is just pure JMS 1.02 sender/receiver clients - ie it is NOT part of, or deployed as a J2EE application.
          SINGLE MACHINE TEST
          ===================
          In a single machine environment I was able to
          - configure a JMSServer
          - configure a JMSSystemModule
          - configure resources for ConnectionFactories and Queue and Topics
          I then made what I believe to be a 'standalone' application module copied from some mysystemmodule-jms.xml and with that I somehow worked out how to deploy it using the weblogic.Deployer tool.
          The deployment apparently set up the JNDI and my JMS client could gain access to the administered objects and do what it does.
          Everything works.
          TWO MACHINE TEST
          ================
          I now have a second machine.
          I want to put my JMS sender client on this new machine and I want the JMS server and JMS receiver client to be unchanged from the SINGLE MACHINE TEST.
          But I really don't know quite how to proceed from here...
          Do I need to install the WebLogic app-server on the sender machine or is the weblogic.jar all I need?
          What is necessary configuration for JNDI access on the sender machine?
          Can I in fact use my original SINGLE MACHINE server unchanged as I am hoping?
          I don't think I want a "thin" client because I read that performance is impacted (and these are performance tests)
          Remember this is NOT a J2EE application. There is no MDB; no client-container; no descriptors etc. Maybe that makes it more complicated - I don't know.
          Sorry for such basic questions but if somebody can just point me to an appropriate example or tutorial it could save me days...
          Thankyou.

Hi,
          My problem is on similar lines. I have an applet based UI working on RMI/t3 protocol.
          I am using weblogic 9.2 as my app server.
          When my applet is executed on JRE 1.5x it works fine.
          But when I use JRE1.4x it gives the following exception
          java.lang.NoClassDefFoundError: javax/management/InvalidAttributeValueException
          at weblogic.rmi.internal.Stub.<clinit>(Stub.java:21)
          at java.lang.Class.forName0(Native Method)
          at java.lang.Class.forName(Class.java:141)
          at weblogic.rmi.internal.StubInfo.class$(StubInfo.java:34)
          at weblogic.rmi.internal.StubInfo.<clinit>(StubInfo.java:34)
          at java.lang.Class.forName0(Native Method)
          I have analyzed the reason for this.
          the class javax/management/InvalidAttributeValueException was included in java 1.5 and above. So JRE 1.4 does not have it.
          In previous versions of weblogic this class was a part of their 'weblogic.jar' file and in weblogic 9.2 it is not a part of weblogic.jar file so when I am using JRE1.4 and weblogic 9.2 then it obviously does not find this class hence the above exception.
          I tried to put this all together and made custom made client jar file incliding the necessary classes. I was able to get throght this exception only land up in following exception.
          java.lang.VerifyError: class weblogic.utils.classloaders.GenericClassLoader overrides final method .
               at java.lang.ClassLoader.defineClass0(Native Method)
               at java.lang.ClassLoader.defineClass(Unknown Source)
               at java.security.SecureClassLoader.defineClass(Unknown Source)
               at sun.applet.AppletClassLoader.findClass(Unknown Source)
               at java.lang.ClassLoader.loadClass(Unknown Source)
               at sun.applet.AppletClassLoader.loadClass(Unknown Source)
               at java.lang.ClassLoader.loadClass(Unknown Source)
               at java.lang.ClassLoader.loadClassInternal(Unknown Source)
               at weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFactoryDelegate.java:204)
               at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
               at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
               at weblogic.jndi.Environment.getContext(Environment.java:307)
               at weblogic.jndi.Environment.getContext(Environment.java:277)
               at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
               at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
               at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
               at javax.naming.InitialContext.init(Unknown Source)
               at javax.naming.InitialContext.<init>(Unknown Source)
          I really need to support clients using Jre 1.4 and Jre 1.5
          I will really appreciate any help on this one.
          Please advise.
          Thank you all.

Mac Mini, HP both sharing monitor with KVM - How where do you install disc?

Ok... laugh, joke make fun or whatever but have to do password reset and I hear I need to reinstall mac os x. Problem is...when I install cd nothing happens. Please advise how to get this installation to take place so I can go to the utilities menu and change this pswd? It is a loaner unit I use for work and I am halted at file updates with this password prompt.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

How to Configure Selector For JMS Bridge

Hi,
I was trying with Selector option in working with multiple Bridges, here is the scenario i applied.
Created five Queues ( Q1, Q2, Q3, Q4 and Q5 ) and configured JMS Bridge Destinations having each queue with unique connection factory ( CF1, CF2, CF3, CF4 and CF5 ) and named it as D1, D2, D3, D4 and D5.
Then created JMS Bridges as JB2 with source as D1 and destination as D2. Similarly JB3 as D1-D3, JB4 as D1-D4 and JB5 as D1-D5.
And set Sector for each of JB2, JB3, JB4 and JB5 as Two, Three, Four and Five respectively and did restart after the changes.
Now i am expecting the following scenario to work
Pushing message to Q1/CF1 having Two in the content of message, hence expecting the message to be delivered to Q2/CF2 through JB2, but the messages is not moved through JB2.
Similarly, Pushed message to Q1/CF1 having Three in the content of message, hence expecting the message to be delivered to Q3/CF3 through JB3, but the messages is not moved through JB3. Similar behavior for other messages having Four and Five in the message content.
During the bridge configuration, selected QOS as "Atmost-Once".
Note: All the configurations were done in same domain and the WL version is 10.3.6.0.*
The sample message i am pushing to Q1/CF1 say "Two Test Data"* and expecting to reach Queue Q2/CF2
Regards
Venkata Madhu
Edited by: vv**** on Sep 12, 2012 1:05 PM

Hi Venkata,
The expected selector syntax is the standard SQL-like JMS syntax. There's an extensive description of the syntax in the javadoc for javax.jms.Message.
Selectors should normally only reference message header fields and message properties. I don't normally recommend using a selector that is based on message body as this requires using a proprietary WebLogic extension based on "xpath" XML expressions, and can have an large impact on performance. (The performance hit is caused by two factors - the need for the JMS server to unmarshal/decompress/page-in the body in order to get at its contents, and the natural cost of scanning a message body to see if it matches a string.)
HTH,
Tom

I already have AVG installed running with IE, how do I now install/run with Firefox ?

I have AVG installed and running under Internet Explorer, how do i install it or get it to run with Firefox and show the AVG tool bar

The AVG Toolbar has known issues with Firefox, as far as I can see. You should ask for help in the AVG forums:
http://forums.avg.com/ww-en/avg-free-forum

Installation with wifi: how exactly do i install the drivers?

hi: i intend to install arch on my laptop but i have an issue with internet: i can use the ethernet port (which is always detected fine by default drivers) but then i have to balance my laptop up next to the router. i would rather use wireless: but i need the broadcom-wl driver.
when exactly do i install it?!
i find this part of the wiki very vague: can someone be so generous as to provide explicit instructions as to how to install these drivers? inclusing what i need on the media etc.
thank you in advance
zom

Try these instructions
Then install this package from the AUR with yaourt
edit: A hint that got me in a little trouble at first (im still a little new) - do *not* just read the code part of the instructions and copy it into your terminal. Read the instructions *very* thoroughly, multiple times if needed, until you understand not only what to do, but *why* you are doing it and what will happen when you're doing it.
Last edited by jgreen1tc (2011-06-12 20:48:57)

RDS12 with UPD - how to configure default profile

Hi all,
I have a new RDS12 session host server using user profile disks, and cant find a way to pre-configure the default profile. What is the best way to go about setting up desktop/taskbar icons and start menu programs?
Thanks,
Brandon

Hi,
Based on my knowledge, during first logon, a virtual disk (VHDX) is created from a template disk. After the configuration for UPD, when we go back to the share, we’ll see that a new file has been created called UVHD-template.vhdx.
You can mount this vhdx and try to customize the profile there.
Niki Han
TechNet Community Support

How to configure Beehive after successful installed in Oracle 10gR2

I have successfully installed Beehive in Oracle 10gR2 with RHEL4, how to configure the email, calendar, content, rtc and other OCS services available in Beehive?

How to configure the actual services can be found in: http://download.oracle.com/docs/cd/E10534_01/bh.100/e10477/toc.htm
How to configure end user clients to connect to Beehive can be found in: http://download.oracle.com/docs/cd/E10534_01/bh.100/e12034/toc.htm
You might also want to take a look at the Concepts Guide (http://download.oracle.com/docs/cd/E10534_01/bh.100/e05393/toc.htm) to read about the new architecture and features in Beehive.

Do i have to use JMS with EJBS?

Hi
I want to use JMS as a messaging system (a queue) between my system and someone elses. I would like to have some java classes on Tomcat to do the job. But...whenever i hear about JMS i always hear it in relation to EJBs. Can i only use JMS with EJBS?
If i can use JMS is there anything important i need to know about.
Thanks in advance!
San H.

As far as I understand you are use JNDI and JMS is not bound with EJB's. These are java API's which are independent. Like JDBC you can use with Servlets, Applets, standalone applications, EJB, JMS etc etc.......
In the same way you can use JNDI and JMS with diferent API. And the important feature of Java is that all java API interact with each other when these are independent. I would appricate comments of everyone......................Thanks

JMS with TomCat ? how to configure or install JMS

Similar Messages

Maybe you are looking for