Job also cancelled due to process termination. See the system log

Hi Friends,
I am working Interface Programs in HCM Module.
My problem is when i am Executing my program in BACKGROUND .After some time my job is canceling. In log i am  getting message
"Job also cancelled due to process termination. See the system log"
when i see that system log also i am unable to find any thing.
but in fore ground is working fine .
Please help me  .
Thanks in Advance..
Regards,
Kumar...

Hi,
You need to check that program in debugging for the Backgournd process.
For doing the debugging of the background process do the following steps.
1)go sm37 and select your job.
2)in the command line just type JDBG (not the /nJDBG OR /oJDBG) and hit enter. it goes to the debuggin mode.
Thanks

Similar Messages

  • Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

    Hi all,
    I have TFS2012 and run several projects.
    We encounterwed with such an error while using Build server.
    Overall Build Process
    Initial Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    00:00
    Get the Build
    00:00
    Update Build Number
    Initial Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Final Property Values
    BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
    Result = Ephone_DIT_Deploy_20150424.1
    01:56
    Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
    Initial Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    00:00
    Get the Build Directory
    Initial Property Values
    Result = d:\temp\217\CTI\Ephone_DIT_Deploy
    01:53
    If Not String.IsNullOrEmpty(ConfigurationFolderPath)
    Initial Property Values
    Condition = True
    01:53
    Run TfsBuild for Configuration Folder
    Initial Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp" 
    00:08
    Getting sources
    00:02
    Labeling sources
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
    00:19
    Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
    00:19
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:10
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:05
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
     CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:01
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
    00:02
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
     C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
    "x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
    a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
    00:00
    Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
     CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
    MSBuild Log File
    00:08
    Generating list of changesets
    00:20
    Built Skins\SkinEPhone.cs for default targets.
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
     C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
    Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
       at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
       at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
       at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
       at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
    00:03
    Creating work item
     Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
    Exception Stack Trace:    at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
       at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    Final Property Values
    BinariesSubdirectory = 
    BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
    CommandLineArguments = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MaxProcesses = 1
    NodeReuse = False
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TargetsNotLogged = 
    TestResultsSubdirectory = 
    ToolPath = 
    ToolPlatform = Auto
    Verbosity = Diagnostic
    Final Property Values
    Condition = True
    Final Property Values
    MaxExecutionTime = 00:00:00
    MaxWaitTime = 04:00:00
    ReservationSpec = Name=*, Tags=
    Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
    Final Property Values
    AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
    BinariesSubdirectory = 
    ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
    DoNotDownloadBuildType = False
    LogFilePerProject = False
    MSBuildArguments = 
    MSBuildPlatform = Auto
    RecursionType = OneLevel
    SourcesSubdirectory = 
    TestResultsSubdirectory = 
    Verbosity = Diagnostic
    Please have a look and guide where to find a problem
    Thanks ahead

    Hi Hooi,
    I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
    From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
    Best regards,

  • How to find out number of background work processe available in the system?

    Hi All,
    I have a FM that triggers a background job using JOB_OPEN, ABAP_SUBMIT and JOB_CLOSE. But the problem is if there are no background work processes available at that moment, it does not return error. Not sure whether the job is even scheduled!
    Is there a way to find out if there are any background work processes available in the system? I know a FM SPBT_INITIALIZE which gives info about dialog work processes. Is there any other FM similar to this which gives info about background wp??
    Regards,
    Shailesh

    your Job will remain in a queue by message handler. once workprocess is free, your job gets scheduled
    by the way, you can use the functionality used in FM TH_DISPLAY_WORKPROCESS_LIST to read the workprocesses
    the command which gets you the workprocess is:
    CALL 'ThWpInfo' ID 'OPCODE' FIELD OPCODE_WP_LIST
                      ID 'TAB' FIELD LIST_STATE_WPLST-TABL
                      ID 'CPU' FIELD LIST_STATE_WPLST-CPU.
    check how its written in include LSDEBF01, form SET_LIST_WPLST
    Edited by: Soumyaprakash Mishra on Dec 12, 2011 12:17 PM

  • Windows 8 installation error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."

    I recently tried testing Server 2012 for installation and I had a major issue.  Windows 8 also uses the same method for installation so this should also apply to Windows 8.  I thought this might be helpful for other people who have the same
    problem.  My setup is a 1U server with no DVD drive, no hard drives, and only USB.  I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive.  I kept receiving the following error when
    I tried to format the hard drive and proceed with the installation:
    "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
    After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it.  Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc). 
    In my case, it was the installation drive itself was a thumb drive.  I ended up digging up an external DVD drive and placed the installation onto a DVD.  Worked flawlessly.  Now I am up and running.
    I tried
    the steps here to no avail.
    Hope this helps anyone else with the same problems.

    Hi,
    Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
    Leo Huang
    TechNet Community Support

  • Where i see the detailed log of cache referesh error????????

    in sxi_cache when i do full refresh...i get error in cache refresh....
    where can i see the detailed log of that error

    In SXI_Cache you mainly check the status of the Integration proceess.0 means the IP is fine and 99 means there is a cache issue.
    Also check this
    https://websmp202.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
    Regards,
    Prateek

  • Cannot see the system folder(private work area) in the dependency manager

    Hi
    I am not able to see the 'system folder'(private work area) in the dependency manager tool.
    I have captured the user schema in this folder, and want to see dependency information of objects in it.
    Please Help.
    Thanks

    Hi Guru,
    Please go through SAP note # 1333684 and configure accordingly.
    Also, follow the note # 1042993, if problem is not getting resolved.
    Thanks
    Pavan

  • Cannot see the system in sld

    Hi
    I just installed Web AS 7.0 and EP7.0 (NW2004s). The SLD is located in another system. While installing I choose the option <b>'conntect to the existing SDL'</b>
    but now after the installation I do not see the system I just installed in the SLD.
    Also when I checkd in Visual Admin and checked the SLD Data Supplier, everything looks correct and status is runniing and when I triggered a data transfer I get the following error
    <b>Operation failed! Failed to collect SLD data. Failed to send HTTP data:401: Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.</b>
    Can anyone please guide me what I am missing here.
    Thank You
    -Mark

    I am also having the same problem. I am unable to see the adminstartor link enabled in the SLD screen to start the data bridges and sld server. can any one tell me how to get admin link to be enabled. I have already  created the  lcr role  and assigned it to sldadministrator role and mapped admin user to this group and cliked the button in sld data supplier using VA. but still I am facing the same problem

  • CS4:  "Critical errors were found in setup. Please see the setup log for details" !!

    I am using Win XP Pro SP3. I have CS3 installed, and successfully installed Dreamweaver, Fireworks and Flash from CS4 Design Premium. Then I successfully uninstalled DW, FW and FL CS3.
    When I tried to open a SWF in Illustrator it failed to open, and then I tried to create a really simple SWF (a rectangle) by exporting from Illustrator and tried to open that and it also failed. Whenever I tried to open or place ANY SWF into Illustrator I get a "file *** is in an unknown format and cannot be opened" error.
    I decided there must be a corrupt file, maybe the upgrade must have affected some Illustrator files, so I tried to repair the CS3 installation. After over 2 hours of INTENSE FRUSTRATION having to constantly switch CS3 and CS4 disks many MANY times, the installation failed, listing "common files" that were missing from non-existent folders such as "C:\Documents and Settings\[username]\Desktop\Adobe CS4\Fireworks CS4\payloads\etc
    When I tried to repair the CS4 installation after loading all the profile settings it errors before the installation window comes up, with "Critical errors were found in setup. Please see the setup log for details". Then it shuts down the installer. I then tried to do a system restore and system restore failed on all restore points!
    Please help:
    1. Where is "the setup log"?
    2. Will creating and populating the folders mentioned in the failed CS3 installation from the CS4 disk allow it to work?
    3. How can I uninstall CS4 if I can't even get to the installation window?
    4. Has Adobe just DESTROYED MY REGISTRY BEYOND REPAIR!!!???

    im haveing a huge irritation useing illustrator cs4 live paint bucket because i can use everything else apart from the paint bucket which should be the easyiest tool to use sometimes it works with the white arrow sometimes it doesnt i sometimes get this below message
    the selection contains objects that cannot be converted. live paint groups can only contain paths and compound paths. clipping paths are not allowed
    the lines which i have drawn are connected which i believe have to be in order to use the paint bucket and i have no clipping paths so i am am baffled
    i presume it is because the line is set to 0.01 it seems the live paint bucket wont notice thin lines, but i tried makeing the line thicker so i could use the paint bucket and it still doesnt work.

  • Critical Errors Were Found in Setup. Please see the Setup Logs for Details

    Hello everyone. I have recently gotten Adobe Flash CS4 and i was really happy, until i kept getting the same error whenever i tried to install:
    "Critical Errors Were Found in Setup. Please see the Setup Logs for Details"
    I do not know what is the cause of the problem, but i have installed Adobe Photoshop CS3 succesfully without any problems. Please do help. I checked the setup logs, but i have no clue what it is saying, and its too long to post here.
    Thank you for your time and help.

    We've all been there with the frustration.
    And I'd really like to see you get back up and running. I'm a bit of an insomniac and tend to go back over the day while I'm pretending to sleep, and a couple of new things filtered back into my mind. There have been, I think, some problems reported about conflicts with some scanner drivers, and of course with firewalls, anti-virus programs, and the like. I think iTunes and instant messengers are also on that list.
    Make sure you turn off everything non-essential before trying to do your installation (and I'd probably do the same thing before running the scripts again). I do this by running MSConfig on XP and going to the startup tab. I uncheck everything I can't identify as being essential (which means I pretty much only leave the mouse driver checked. You may need to google some of the stuff to find out what it is) and then go to the services tab and hide all Microsoft services. From what's left I again uncheck everything that isn't required to run the system. Bonjour, if you see it, should be left active as it is used by the CS3 installer. Restart the computer.
    This should have turned off pretty much everything that could have been conflicting with the installer. Go to windows security center and make sure the windows firewall is also temporarily turned off, if you use it, and you should be ready to go. It can't hurt to try the add/remove programs again, but it probably won't show any adobe products anymore if you've run the scripts correctly (did you also run the MSI cleanup utility?).
    After you've finished, you can run MSConfig again and reset to standard startup.
    Peter

  • Job that must be programmed to collect information for system log (sm21)

    Please, Who is the job that must be programmed to collect information for system log (sm21) ?
    Thank you very much.
    Hugo.

    Before you reinitialize your log shipping configuration, check to see if you can take a differential backup and restore that on top of your standby database. This is relatively easier than to take a full database backup just to reinitialize
    Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
    Blog |
    Twitter | LinkedIn
    SQL Server High Availability and Disaster Recover Deep Dive Course
    I can take a diff backup.. But in my secondary, when i right click standby >tasks-->restore-->i can see only option to restore transaction log file. Other options are greyed out. How can i restore a diff backup now. If i bring the DB online with
    restore with recovery, i have to restore a full backup before i can apply a diff backup. 
    Somebody provide me insight on below error
    This secondary database is not functional because
    the required copy or restore job cannot be found. You must remove this secondary database by clicking Remove. To resume log shipping to this secondary database, add it as a secondary again using the same settings.If
    you resume log shipping and you specify the same restore path that you used before, any backup files that are uncopied or unrestored to this database will be copied and restored when it is added as a secondary again.  Reinitializing the secondary database
    is unnecessary."
    I can see the LS_restore job and the job is running as per the schedule, we dont run copy job because
    the backup directly falls in secondary server. wats the reason for the above error.

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • SQL reporting - An internal error occurred on the report server. See the error log for more details. (rsInternalError)

    I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
    Error: Sub report cannot be shown.
    An internal error occurred on the report server. See the error log for more details. (rsInternalError)
    When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
    Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
    Any Suggestion/feedback is highly appreciated.
    Thank You.
    The code of the sample RDL is shown below:
    <?xml version="1.0" encoding="utf-8"?>
    <Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
      <DataSources>
        <DataSource Name="DataSource1">
          <DataSourceReference>DataSource1</DataSourceReference>
          <rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
        </DataSource>
      </DataSources>
      <BottomMargin>0.25in</BottomMargin>
      <RightMargin>0.25in</RightMargin>
      <PageWidth>11in</PageWidth>
      <ReportParameters>
        <ReportParameter Name="machine_id">
          <DataType>String</DataType>
          <Prompt>machine_id</Prompt>
        </ReportParameter>
        <ReportParameter Name="from_date">
          <DataType>String</DataType>
          <AllowBlank>true</AllowBlank>
          <Prompt>From Date</Prompt>
        </ReportParameter>
        <ReportParameter Name="to_date">
          <DataType>String</DataType>
          <AllowBlank>true</AllowBlank>
          <Prompt>To Date</Prompt>
        </ReportParameter>
      </ReportParameters>
      <rd:DrawGrid>true</rd:DrawGrid>
      <InteractiveWidth>8.5in</InteractiveWidth>
      <rd:SnapToGrid>true</rd:SnapToGrid>
      <Body>
        <ReportItems>
          <Table Name="table1">
            <DataSetName>Main_Report</DataSetName>
            <TableGroups>
              <TableGroup>
                <Header>
                  <TableRows>
                    <TableRow>
                      <TableCells>
                        <TableCell>
                          <ReportItems>
                            <Textbox Name="textbox2">
                              <rd:DefaultName>textbox2</rd:DefaultName>
                              <ZIndex>1</ZIndex>
                              <Style>
                                <TextAlign>Left</TextAlign>
                                <PaddingLeft>2pt</PaddingLeft>
                                <PaddingBottom>2pt</PaddingBottom>
                                <PaddingRight>2pt</PaddingRight>
                                <PaddingTop>2pt</PaddingTop>
                              </Style>
                              <CanGrow>true</CanGrow>
                              <Value>=Fields!syscode.Value</Value>
                            </Textbox>
                          </ReportItems>
                        </TableCell>
                      </TableCells>
                      <Height>0.25in</Height>
                    </TableRow>
                  </TableRows>
                  <RepeatOnNewPage>true</RepeatOnNewPage>
                </Header>
                <Grouping Name="table1_Group1">
                  <PageBreakAtEnd>true</PageBreakAtEnd>
                  <GroupExpressions>
                    <GroupExpression>=Fields!syscode.Value</GroupExpression>
                  </GroupExpressions>
                </Grouping>
              </TableGroup>
            </TableGroups>
            <Details>
              <TableRows>
                <TableRow>
                  <TableCells>
                    <TableCell>
                      <ReportItems>
                        <Subreport Name="subreport1">
                          <Parameters>
                            <Parameter Name="machine_id">
                              <Value>=Fields!machine_ip.Value</Value>
                            </Parameter>
                            <Parameter Name="syscode">
                              <Value>=Fields!syscode.Value</Value>
                            </Parameter>
                            <Parameter Name="from_date">
                              <Value>=Parameters!from_date.Value</Value>
                            </Parameter>
                            <Parameter Name="to_date">
                              <Value>=Parameters!to_date.Value</Value>
                            </Parameter>
                          </Parameters>
                          <ReportName>Holding_Summary_Multi_Period</ReportName>
                        </Subreport>
                      </ReportItems>
                    </TableCell>
                  </TableCells>
                  <Height>0.25in</Height>
                </TableRow>
              </TableRows>
            </Details>
            <TableColumns>
              <TableColumn>
                <Width>10.5in</Width>
              </TableColumn>
            </TableColumns>
            <Height>0.5in</Height>
          </Table>
        </ReportItems>
        <Height>0.75in</Height>
      </Body>
      <rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
      <LeftMargin>0.25in</LeftMargin>
      <DataSets>
        <DataSet Name="Main_Report">
          <Query>
            <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
            <CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
    where machine_ip = @machine_id</CommandText>
            <QueryParameters>
              <QueryParameter Name="@machine_id">
                <Value>=Parameters!machine_id.Value</Value>
              </QueryParameter>
            </QueryParameters>
            <DataSourceName>DataSource1</DataSourceName>
          </Query>
          <Fields>
            <Field Name="syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>syscode</DataField>
            </Field>
            <Field Name="display_name">
              <rd:TypeName>System.String</rd:TypeName>
              <DataField>display_name</DataField>
            </Field>
            <Field Name="customer_syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>customer_syscode</DataField>
            </Field>
            <Field Name="account_syscode">
              <rd:TypeName>System.Int64</rd:TypeName>
              <DataField>account_syscode</DataField>
            </Field>
            <Field Name="machine_ip">
              <rd:TypeName>System.String</rd:TypeName>
              <DataField>machine_ip</DataField>
            </Field>
          </Fields>
        </DataSet>
      </DataSets>
      <Code>Shared offset As Integer
    Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
      If reset
        offset = pagenumber - 1
      End If
      Return pagenumber - offset
    End Function
    </Code>
      <Width>10.5in</Width>
      <InteractiveHeight>11in</InteractiveHeight>
      <Language>en-US</Language>
      <PageFooter>
        <ReportItems>
          <Image Name="image1">
            <Sizing>Fit</Sizing>
            <Left>8.875in</Left>
            <MIMEType />
            <Width>1.5in</Width>
            <Source>External</Source>
            <Style />
            <Value>bottom_right_logo.gif</Value>
          </Image>
        </ReportItems>
        <Height>0.5in</Height>
        <PrintOnLastPage>true</PrintOnLastPage>
        <PrintOnFirstPage>true</PrintOnFirstPage>
      </PageFooter>
      <TopMargin>0.5in</TopMargin>
      <PageHeight>8.5in</PageHeight>
    </Report>

    i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
    when i click on manage for .rdl file, its throwing error , as
    "An internal error occurred on the report server. See the error log for more details. (rsInternalError)
    Object reference not set to an instance of an object.
    please help me with this

  • An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

    An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024) 
     while proview the report i will get this error am using sql server 2008R2,
    can u plesae hlep me out for this
     

    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
      <Locale>English (United States)</Locale>
      <TimeZone>W. Europe Standard Time</TimeZone>
      <Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
      <SystemName>WEGDACM1</SystemName>
      <OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
      <OSVersion>6.1.7601</OSVersion>
      <ProcessID>4880</ProcessID>
      <Virtualization>Hypervisor</Virtualization>
    </Header>
    rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
    rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
    rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
    servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
       at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
    filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
       at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
    rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
    rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
    servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
    rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
    library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
    servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
    appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
    appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
    error. 
    library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
    library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. ;
    The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

  • I tried to backup my bookmarks to move them to new computer, but it didn't work. I deleted the moved folder and now when I try to opn Firefox it says i must first close the existing firefox process or restart the system.

    I removed and reinstalled Mozilla and I still get this message. I am assuming that when I deleted the folder that had the bookmarks, something got screwed up in the program. I don't understand why completely deleting the program, downloading it again, and reinstalling it, does not resolve the problem? Also , I want to know how to do this properly, so that I can have my Favorites on the new computer.

    Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
    * How to stop the running Firefox process
    ** In Task Manager, does firefox.exe show in the '''<u>Processes</u>''' tab?
    ** See: http://kb.mozillazine.org/Kill_application
    * What may cause Firefox to hang at exit
    ** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
    ** http://kb.mozillazine.org/Firefox_hangs
    ** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
    * You may need to try Firefox Safe Mode
    ** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
    **Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''<u>before</u>''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    ** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''<u>one at a time</u>''' until the problem reappears. '''<u>You MUST close and restart Firefox after EACH change</u>''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
    ** See the following for more information
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
    *** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

  • HELP! Can't see the System Preferences

    I tried to launch the System Preference application and all I get is a white window, you can't see the actual icons. This also happens in the Preview as well as the Console application. I tried a clean reinstall of my OS but still doesn't work. I also tried repairing permissions.
    I don't know what else to try.

    Hi Erwin, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Did DU report any errors? Where they fixed?

Maybe you are looking for

  • How to pull PO changes in report.

    Dear Friends. I am struggling on one issue. Need your help or clue on this issue The Business requires a report which gives them a list of changes made during a particular time or date range. As per analysis all the data's are stored in CDPOS and CDH

  • Is it possibly for you apple guys to update a iphone 3gs to ios 5

    i have a iphone 3gs and i want to update it to ios 5.0 but i cant can you guys do it

  • Keyboard bizarre problem

    Hi, since yesterday, when i push some keys on my wired apple keyboard, i get some weird output. when i put the named keys, the following is displayed: 1 = 12 2 = 12 q = qwz w = wz a = as y = yx s = asz The weird thing is, not all of my keys generate

  • MacWord BASIC help, please!  Creating folders (finding the "home folder")

    I am new to Mac, but not to Word.  Where is the "home folder" and how do I create a folder to hold Word documents I've named and saved?  

  • GetProfileString doesn't support unicode format.??

    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head>     <title>Untitled</title>     <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> </head> <body> <cfset currentPath = getCurrentTemplatePath()> <cfset c