JOB execution fails due to Access failure to procedures and views using certificates (encryption)
Job execution fails using SQLServerAgent account but runs successfully under another windows personal account.
Both have same security access on server and DB.
The Windows account is mapped to dbo on the database .
The package uses procedures and views which are using encryption by certificates.
Please advice on how to provide security so that job runs from the agent
Hi Prady26,
If the SQL Server Agent Service account and the proxy account generated based on a Windows user account have the same permissions on both the SQL Server database and the File System of the server, it may be related to the protection level of the package.
If the package is set to encrypt with UserKey, the job will fail unless it runs under the security context of the Windows user that designs the package in BIDS/SSDT. You can check the
ProtectionLevel of the package in the BIDS/SSDT to see if it is EncryptSensitiveWithUserKey or EncryptAllWithUserKey, if it is, re-deploy/reinstall the package and set the package protection
level to “Relay on server storage for encryption”.
If the issue persists, post the error message in the job history for further analysis.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support
Similar Messages
-
ERROR: Execution failed due to binary missing or permission issues
I have a little problem with OEM. I've setup the LDAP authentication on my Linux RAC nodes and when I run a OS command without sudo, the date command works. I've setup my sudoers so my regular LDAP account can execute any command as oracle, but when I run the same OS command with sudo to oracle, the job comes back with:
Error Log
ERROR: Execution failed due to binary missing or permission issues
Has anyone else seen this problem?
Thanks,
ArwinLooks like someone had some fat fingers when typing in the emcli commands to tell OEM where the sudo binary lives. I which the errors that OEM spit out are more meaningful, such as if it is going to tell me that a binary or permission is not there or set, what was it looking at?
-
OWS-05101: Execution failed due to Oracle error 1036
Error occured while accessing
"/ndtt/plsql/ndtt_log_add.submit_log_add"
at Mon May 19 00:26:03 2008
OWS-05101: Execution failed due to Oracle error 1036
ORA-01036: illegal variable name/number
I get above error message when i click on submit button from front end of my application. Below is the code which performs submit action.
PROCEDURE display_entry_form(pAction varchar2,
pState varchar2, pSession varchar2,
pLda ndtt_rec_type.ndtt_lda_detail,
pJobs ndtt_rec_type.ndtt_viewjob_type)
IS
BEGIN
htp.formOpen(ndtt_url.URL_SUBMIT_LOG_ADD,'POST',
cattributes=>'target=''right_frame''');
htp.formSubmit(cvalue=>'Submit');
htp.br;
htp.br;
htp.formHidden('action' ,'process');
htp.formHidden('state' ,pState);
htp.formHidden('lda_state',pState);
htp.formHidden('session' ,pSession);
-- added session for DCR# 1A-5065416 NDTT 4.0 BY SSBABU
ndtt_lda_pkg.show_lda_and_jobs('edit', pLda, pJobs, pAction,pSession );
htp.br;
htp.formSubmit(cvalue=>'Submit');
htp.formClose;
END; -- display_entry_form
When i Click on sumbit button it will not call the function submit_log_add it will throw the error,which performs the tables updates.
Can anybody help me out to solve above issue.I see nothing in your code that refers to a function named "SUBMIT_LOG_ADD." Is this the correct code?
In what version of Oracle? -
Hub startup failed due to licensing failure
Hi all.
I have just installed weblogic 6.0 sp1 on solaris 2.8. the web server starts
up and everything is hunky dory.
furthermore i downloaded collaborate 1.0.1 and installed it. the
installation went fine.
here is my problem. when i execute the startWeblogic.sh script in the hub,
Weblogic reports the following error:
<24-Apr-01 13:49:03 GMT+01:00> <Error> <WLC> <<Hub> ERROR: Hub startup
failed due to licensing failure.>
I get this problem using jdk122 and jdk130.
I cannot seem to find the problem.
Any feedback would be appreciated.
PS. My license.bea file looks as follows:
<?xml version="1.0"?>
<bea-licenses>
<license-group format="1.0" product="WebLogic Collaborate"
release="1.0">
<license
component="Core Server"
expiration="2001-05-24"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
signature="2tDDH3g1qXubdlfsahWRNrR6+tc=0MC0CFCoH/XUHiZuu+yhzpuzv6UFl
kJ44AhUA2/U26g1keq5nNoO00NC2u9ezWeA="
/>
</license-group>
<license-group format="1.0" product="wlpi" release="1.2">
<license
component="WebLogic Process Integrator"
expiration="2001-05-24"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
users="5"
signature="2tDDH3g1qXubdlfsahWRNrR6+tc=0MCwCFEh5H427STpTMX1y25DSmc65
b/MVAhQMNJo1ujoB6DudzF59hL/Tx2vbGQ=="
/>
</license-group>
<license
component="WebLogic"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="OFcm7oSc4jOT5vonluVZpsAHX2g=0MCwCFEmkcBweXEoxtJxzCIarx8i+
XBguAhQvCxM9E/T4HGfbIUfb4+OiNUYsPw=="
/>
<license
component="SSL/Export"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="OgS8PvglCrGr5xglLHeut8tE5vc=0MC0CFQDcxuNftALK3tZYuJw6hI15
GaqrBgIUcTi0vNzwoG1alTX1WXnvcX9EOiM="
/>
<license
component="2PC"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="CcdspC/3P0iELwWsETBWI/hEalw=0MC0CFQCtTlW7enw3kFZ7IU09jaa/
BVle5wIUSSfMk23C19hznredmfr+soEYiX0="
/>
<license
component="In-memory Replication - Servlet"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="c+mtrQ1ZuRiKeiELua/hSxvHqew=0MC4CFQC4qvLRsblTBvC5+IEVrDI1
Tek1YwIVAJ1NYWZE6xPHYyyVdlaXRJbhayCj"
/>
<license
component="In-memory Replication - EJB"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="ZenJ1bPXGf2N/Bq8XugDnDIP8sQ=0MC0CFQC+ayYQFxhpIMug7ZHtZIfS
vg4tlwIUHIYgx30GoxIdmR19cGddWM/mp3E="
/>
<license
component="EJB 1.1"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="XwwhoY5ysJ8h1pjzx23ujxZI9nY=0MC4CFQC2ATLeRv6cStQE1B/gyMUT
R6SRvQIVAMsQmtFC0/J4sF26n+B1zEyDOmv/"
/>
<license
component="EJB 2.0"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
units="5"
signature="ksI9jkE6gL9u8GdVEpZNQtOvjm8=0MCwCFBUir1rQV/FLNdc+4lfdIV1x
+xk5AhQpQwwWMfUd6TbL3UvB0u9DbZponQ=="
/>
<license
component="JMS"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="Z4Q4VngOAJSqSsr1UXC37DTOyVg=0MC0CFQCZtOwzb02hOSR3z9Hp6k86
nl1uFQIUfhy+ODL+Y7B9DkGDS7yT4zQPPpE="
/>
<license
component="Cluster"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="Tkg9CGjEik3MbkFmi6rPsSiO0J0=0MC0CFEAV5hPKLVSgV8YoeCEVu5m7
5ktkAhUA2lBI0PwiMigvK1E/pVS0vqmsy3w="
/>
<license
component="Clustered JMS"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="nEpfLZwWyM4Bo7UZZHE4hQgntMc=0MCwCFBKYtPvqZE18JdGBvU6cZomM
xW1cAhR3moJKg7FHMxvsZphQz5jVCahrfA=="
/>
<license
component="jDriver/MSSQLServer4"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="Dgw2DzDWyBNob6pJunUY1Xoz7c8=0MC0CFQC4PKj8UFoC3J0XuC7pmzRL
TtgP8QIUAhJF5DuvZ10zvf/6mxe0Ti/rG4c="
/>
<license
component="jDriver/Informix4"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="6O/i8fVnKIeVwzz+e0zUMQL5uRU=0MC0CFH+NK7nnRm+Qp+qRXZdeV2yF
6YxdAhUA3vch2xTdmM5Ao+00+IOR5f3jGH0="
/>
<license
component="jDriver/Oracle"
expiration="2001-05-23"
ip="any"
licensee="BEA Evaluation Customer"
type="EVAL"
units="5"
signature="NtSVpPAloTJqBstOWKVnuh3q0H4=0MC0CFA+2ny24Zdyrb0lsL3duwfEB
9zKMAhUAqDtTbLMN3QfJWUVhJr+NBQU/x/k="
/>
</license-group>
</bea-licenses>Gotta add listeners.ContextListener to your CLASSPATH
in Eclipse.
I don't think that package name is right. You've got
another problem besides your context XML.
%The context XML may not be the problem at all. Such tomcat errors are standard when it was unable to load required classes on startup.
The listeners all being interfaces, it's impossible to say whether it is the standard listeners or custom listener classes (regd in your web.xml) that's not being found on startup.
cheers,
ram. -
Schedules Error - Job execution failed because the user who scheduled this
Hi
I wonder if anyone can help
I have a report that I can deliver by email through the BI Publsiher front end without issue. However when I call the report to send by email through my oracle 11G Database, as the same BI User I get the following error message
"oracle.apps.xdo.servlet.scheduler.ProcessingException: Job execution failed because the user who scheduled this job has no more permission or priviledge to run the job."
Any suggestions?
Thanks
KevThe scheduler appears to be the culprit here so try the following:
1. Open the [repository_home]/Admin/Scheduler/quartz-config.properties file
2. Add the following entry:
org.quartz.threadPool.threadsInheritContextClassLoaderOfInitializingThread=true
3. Restart the environment (xmlpserver)
4. Rerun the report via the scheduler -
Jobs are failing due to DBIF_RSQL_SQL_ERROR (SQL30081N)
HI SAP,
Job is failing with the below short dumps:
1. Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 04.10.2010 06:31:26
Database error text........: "SQL30081N A communication error has been
detected. Communication protocol being used: "TCP/IP". Communication API being
used: "SOCKETS". Location where the error was detected: "10.62.92.4".
Communication function detecting the error: "recv". Protoco"
Internal call code.........: "[RSQL/OPEN/KONP ]"
2. Runtime Errors DBIF_REPO_SQL_ERROR
Date and Time 06.10.2010 19:24:12
Database error text........: "CLI0108E Communication link failure.
SQLSTATE=40003"
Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "
Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============C ]"
Work process traice file has the below error which came today:
C *** ERROR in DB6Open[dbdb6.c, 3308] CON = 0 (BEGIN)
C &+ DbSlBegReadDB6( SQLExecute ): [IBM][CLI Driver] SQL30081N A communication error has been detected. Communication
C &+ protocol being used: "TCP/IP". Communication API being used: "SOCKETS". Location where the error was detected:
C &+ "10.62.92.4". Communication function detecting the error: "recv". Protocol specific error code(s): "", "", "0"
C *** ERROR in DB6Open[dbdb6.c, 3308] (END)
B ***LOG BYM=> severe DB error -30081 ; work process in reconnect status [dbsh#3 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error -30081 performing SEL on table KONP [dbtran#14 @ 7588] [dbtran 7588 ]
B ***LOG BY0=> SQL30081N A communication error has been detected. Communication protocol being used: "TCP/IP". Communication API
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'SEL'
B RSLT: {dbsl=99, tran=1}
B FHDR: {tab='KONP', fcode=53, mode=2, bpb=0, dbcnt=0, crsr=1,
B hold=0, keep=1, xfer=0, pkg=0, upto=0, init:b=0,
B init:p=(nil), init:#=148, wa:p=0x7000000501bc3e8, wa:#=148}
C *** ERROR in getAndBindSQLDA[dbdb6.c, 14585] CON = 0 (BEGIN)
C &+ DbSlReadDB6( SQLExtendedBind ): [IBM][CLI Driver] CLI0108E Communication link failure. SQLSTATE=40003
C &+
C &+ SELECT "UNAM", "UDAT", "UTIME", "L_DATALG", "Q_DATALG", "SDAT", "STIME", "MINOR_VERS", "MAJOR_VERS" FROM "REPOLOAD
C &+ " WHERE "PROGNAME" = ? AND "R3STATE" = ? AND "MACH" = ? WITH UR
C &+ cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, buffer_lobs=YES, op_type=18, reopt=0
C &+ ABAP location info: 'RSBTCRTE', 807
C &+
C &+ ABAP location info 'ZBW_FILL_KONPA004', 273
C &+
C *** ERROR in getAndBindSQLDA[dbdb6.c, 14585] (END)
B ***LOG BYM=> severe DB error -99999 ; work process in reconnect status [dbsh#3 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error -99999 performing SEL on table REPOLOAD [dbrepo#5 @ 2657] [dbrepo 2657 ]
B ***LOG BY0=> CLI0108E Communication link failure. SQLSTATE=40003 [dbrepo#5 @ 2657] [dbrepo 2657 ]
B ***LOG BY0=> CLI0108E Communication link failure. SQLSTATE=40003 [dbrepo#5 @ 2657] [dbrepo 2657 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
C *** ERROR in DB6EndTransaction[dbdb6.c, 6768] CON = 0 (BEGIN)
C &+ DbSlRollbackDB6( SQLEndTran ): [IBM][CLI Driver] CLI0106E Connection is closed. SQLSTATE=08003
C &+
C &+ ROLLBACK[FORCED][DONT_KEEP_WITH_HOLD]
C &+
C &+ ABAP location info 'ZBW_FILL_KONPA004', 273
C &+
C *** ERROR in DB6EndTransaction[dbdb6.c, 6768] (END)
B ***LOG BYM=> severe DB error -99999 ; work process in reconnect status [dbsh#3 @ 1127] [dbsh 1127 ]
Kindly suggest what can be done to resove this, as this is coming for specificly two jobs.
Regards,
MunishMy first guess would be that there is a network issue between application server and database. If you're running that job on the database server I'd also check db2diag for possible errors.
Markus -
Some jobs are failing due to listener.
Hi all,
Only some jobs are failing ,and remaining jobs succeeded.I checked the listener, it was up only.(10.2.0.2 on linux)
the reason for failing jobs showed is
ORA-12541: TNS:no listener
Can you please tell what is the reason for this
Thanks in advance,
PrashantSome of the failing jobs could be referencing a db link and you need to verify the tns alias being used in the database links
Use tnsping <tnsalias> to verify the connect string -
Lately my time machine backups have been failing because "...the sparsebundle is already in use." What does this mean, and how can I fix it?
What does this mean
It means that there are bugs in the Time Machine software
how can I fix it?
A rather complex procedure....
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the the back of the Time Capsule -
Multiple users access one iPhoto library and view and edit
I have 3 Macs and 5 users in our family. I'd like to have one iPhoto library that any user can access from any of the machines and view and/or edit. I don't need simultaneous access (which from reading posts I can see is not possible in iPhoto).
If I move the library to external HD will I be able to access the libary from each Mac over Wi-Fi? From what I read I'd need to hold ALT when opening iPhoto in each user account, on each Mac, and choose the library on the external drive.
If I set it up like this then once photos imported any user can see them, and edit if they want to? Presumably any Projects would be in the one central library rather tan being specific to a particular user?Yes and no
the hard drive that the iPhoto sits on must be formatted Mac OS extended (jorunaled)
iPhoto is not a multi user program and if two different people edit atthe same time it will not wrok correctly
Most importantly WiFi is not a reliable connection and has many dropouts - if you edit over WiFi you are highly likely to lose data and corrupt yoru library - it is not a good idea - viewing is slow but will work
LN -
Management Data Warehouse Data Collection fails due to login failure
Hello,
I am trying to set up a Management Data Warehouse on a server other than the one I want statistics of. Unfortunately, each upload fails because the data collector upload job cannot log onto the warehouse server. For some inexplicable reason the process is trying to log on using domain\serverName. Obviously no such user exists, and the process fails. Below is the error message I see in the logs:
Description: An error occurred with the following error message: "An error occurred while verifying the result set schema against the output table schema. The data collector cannot connect to the management data warehouse. : Login failed for user 'domain\server name$'.".
Any help would be greatly appreciated.
Thanks,
Zacharyhttp://technet.microsoft.com/en-us/library/bb677211.aspx says
The data warehouse is installed on a different computer from the data collector. Probable causes are network connectivity problems or an unavailable host server. This error only affects upload packages.
Handling: Because there is no advance notification about a server shutdown, this error cannot be anticipated and handled automatically. The error is logged and after a brief interval, the upload is restarted. After four unsuccessful upload attempts, the collection set is disabled and its state is written to the execution log.
Note:
Any data that is collected while the collection set is running is kept and accumulated. If the upload package can connect to the data warehouse, the accumulated data is uploaded.
Blog: http://dineshasanka.spaces.live.com -
BATCH JOB GETTING FAILED DUE TO WARNING MESSAGE
Hi,
Our background job is getting failed if we are having warning meesage , why it is happening , could any one provide inputs .
In bacground it's considering Warning message as Error message .Hi Garima,
CHange the code as follows:
if sy-batch = 'X'.
Message 'Error updating data !' type 'I'.
else.
Message 'Error updating data !' type 'W'.
endif.
i..e When executed in bckground display INFORMATION Message & in Foreground display WARNING message.
Best regards,
Prashant -
Financial Batch jobs were failing due to too many files opened
1) This issue started after upgrading the OS from windows 2003 to 2008 and PeopleSoft from 8.49 patch 10 to 8.52 to patch 9
I am also getting same kind of error
Below is the error message:
open of the file E:\Ftp\GL_IMP_571819.Log failed: Too many open files (2,633) GL_JRNL_IMP.PROCESS. GBLdefualt 1900-01-01.Import.On Execute PCPC:52127 statement:7333 -
Baseline failing due to 'ConfigurationGeneratorForge' failure
Hi,
The baseline update is failing giving the below mentioned error.
[04.10.13 15:49:06] SEVERE: Batch component 'ConfigurationGeneratorForge' failed. Refer to component logs in F:\testApplication\config\script\..\..\.\logs\forges\ConfigurationGeneratorForge on host ITLHost.
Occurred while executing line 20 of valid BeanShell script:
17|
18| // Generate instance configuration
19| ConfigurationGeneratorForge.archiveLogDir();
20| ConfigurationGeneratorForge.run();
21|
22| // archive logs and run ITL
23| Forge.archiveLogDir();
[04.10.13 15:49:06] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.component.BatchComponent run - Batch component 'ConfigurationGeneratorForge' failed. Refer to component logs in F:\testApplication\config\script\..\..\.\logs\forges\ConfigurationGeneratorForge on host ITLHost.
[04.10.13 15:49:06] INFO: Released lock 'update_lock'.
Please suggest what needs to be done.
Thanks
VarunHi Pankaj,
PFB the error from the logs.
ERROR 04/10/13 10:58:10.282 UTC (1365591490281) FORGE {config}: (AdapterRunner): org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'configurationAdapter' defined in class path resource [config/script/fcm.context.xml]: Cannot resolve reference to bean 'forgeConfigurationManager' while setting bean property 'forgeConfigurationManager'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'forgeConfigurationManager' defined in class path resource [config/script/fcm.context.xml]: Instantiation of bean failed; nested exception is org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [com.endeca.itl.fcm.ForgeConfigurationManager]: Constructor threw exception; nested exception is java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
com.endeca.edf.adapter.AdapterException: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'configurationAdapter' defined in class path resource [config/script/fcm.context.xml]: Cannot resolve reference to bean 'forgeConfigurationManager' while setting bean property 'forgeConfigurationManager'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'forgeConfigurationManager' defined in class path resource [config/script/fcm.context.xml]: Instantiation of bean failed; nested exception is org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [com.endeca.itl.fcm.ForgeConfigurationManager]: Constructor threw exception; nested exception is java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
at com.endeca.esource.springadapter.SpringDelegateAdapter.loadApplicationContext(SpringDelegateAdapter.java:121)
at com.endeca.esource.springadapter.SpringDelegateAdapter.loadDelegateAdapter(SpringDelegateAdapter.java:73)
at com.endeca.esource.springadapter.SpringDelegateAdapter.execute(SpringDelegateAdapter.java:60)
at com.endeca.edf.adapter.AdapterRunner.run(AdapterRunner.java:168)
at com.endeca.edf.adapter.AdapterRunner.main(AdapterRunner.java:43)
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'configurationAdapter' defined in class path resource [config/script/fcm.context.xml]: Cannot resolve reference to bean 'forgeConfigurationManager' while setting bean property 'forgeConfigurationManager'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'forgeConfigurationManager' defined in class path resource [config/script/fcm.context.xml]: Instantiation of bean failed; nested exception is org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [com.endeca.itl.fcm.ForgeConfigurationManager]: Constructor threw exception; nested exception is java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429)
at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380)
at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139)
at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:93)
at com.endeca.esource.springadapter.SpringDelegateAdapter.loadApplicationContext(SpringDelegateAdapter.java:119)
... 4 more
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'forgeConfigurationManager' defined in class path resource [config/script/fcm.context.xml]: Instantiation of bean failed; nested exception is org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [com.endeca.itl.fcm.ForgeConfigurationManager]: Constructor threw exception; nested exception is java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:883)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:839)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:440)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged(Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
... 22 more
Caused by: org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [com.endeca.itl.fcm.ForgeConfigurationManager]: Constructor threw exception; nested exception is java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:115)
at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:61)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:877)
... 33 more
Caused by: java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
at com.endeca.itl.fcm.ForgeConfigurationManager.<init>(ForgeConfigurationManager.java:226)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:100)
... 35 more
Caused by: java.lang.ClassNotFoundException: org.slf4j.LoggerFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
... 41 more
ERROR 04/10/13 10:58:11.332 UTC (1365591491332) FORGE {config}: The java process evaluating the java manipulator class 'com.endeca.esource.springadapter.SpringDelegateAdapter' failed. Check the file 'F:\testApplication\config\script\..\..\.\logs\forges\ConfigurationGeneratorForge\Edf.Pipeline.RecordPipeline.JavaManipulator.LoadSchemaRecordStore.log' for more information.
INFO 04/10/13 10:58:11.332 UTC (1365591491332) FORGE {config}: RecordCache 'SchemaRecordStoreCache (LoadSchemaRecordStore)' read 0 records.
INFO 04/10/13 10:58:11.332 UTC (1365591491332) FORGE {config}: RecordCache 'SchemaRecordStoreCache (LoadSchemaRecordStore)' loaded 0 record, combined 0 records.
INFO 04/10/13 10:58:11.332 UTC (1365591491332) FORGE {config}: RecordCache 'SchemaRecordStoreCache' heap used: 0 MB (total: 7.01563 MB).
INFO 04/10/13 10:58:11.332 UTC (1365591491332) FORGE {config}: JavaManipulator 'LoadSchemaRecordStore': Finished
INFO 04/10/13 10:58:11.333 UTC (1365591491332) FORGE {config}: RecordCache 'SchemaCsvCache (MappedSchemaCsv)' loading records.
INFO 04/10/13 10:58:11.468 UTC (1365591491467) FORGE {config}: (AdapterRunner): Adapter class: com.endeca.itl.fcm.integration.cadk.ifdi.RecordPropertyRenamer
ERROR 04/10/13 10:58:11.468 UTC (1365591491467) FORGE {config}: (AdapterRunner): java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
com.endeca.edf.adapter.AdapterRunner$LoadAdapterException: java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
at com.endeca.edf.adapter.AdapterRunner.loadAdapter(AdapterRunner.java:326)
at com.endeca.edf.adapter.AdapterRunner.run(AdapterRunner.java:162)
at com.endeca.edf.adapter.AdapterRunner.main(AdapterRunner.java:43)
Caused by: java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory
at com.endeca.itl.fcm.integration.cadk.ifdi.RecordPropertyRenamer.<init>(RecordPropertyRenamer.java:44)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at com.endeca.edf.adapter.AdapterRunner.loadAdapter(AdapterRunner.java:317)
... 2 more
Caused by: java.lang.ClassNotFoundException: org.slf4j.LoggerFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
... 10 more
ERROR 04/10/13 10:58:12.491 UTC (1365591492491) FORGE {config}: The java process evaluating the java manipulator class 'com.endeca.itl.fcm.integration.cadk.ifdi.RecordPropertyRenamer' failed. Check the file 'F:\testApplication\config\script\..\..\.\logs\forges\ConfigurationGeneratorForge\Edf.Pipeline.RecordPipeline.JavaManipulator.MappedSchemaCsv.log' for more information.
Regards,
Varun -
OWS-05101: Execution failed due to Oracle error -6550
I am a new for Oracle, and I am tired for this error -6550. I am coding CGI with PL/SQL
and when I change parameter of the procedure,
the error-6550 will be occured. I don't know
why it is happened. but when I change the name of the procedure, it will be OK. Is it
a bug of Oracle? tell me something, if you know anything about it, thanks.Hi,
I too got the same error message and you know what I did.
I just tried declaring all the variables that are in the called form, in the main form, i.e if you are in form A and calling B that has 10 parameters, all these 10 variables has to be in form A. And this got rid of the error. -
Ldd: Spin.so: execution failed due to signal 11 (core dumped)
I try to run ldd command on my shared Library Spin.so and ldd gives core dump on this.
i have built the library with -KPIC option, so there is no chance of problem from Position independent code.
same shared Library works fine on all the sunos machines(5.7, 5.8,5.9,5.10) except the one we have problem on (SUN 5.8).
Is this related to some library building problem or something related to patch of 5.8
Here is the specification of the machine
SunOS machinename 5.8 Generic_117350-39 sun4u sparc SUNW,Ultra-60
Any help in this regards is highly appreciated...following is the stack trace generated using mdb for the core
$cld.so.1`relocate_lmc+0x214(fe7c1920, c, ff3e0f08, fe7c1920, 1, 1)
ld.so.1`setup+0x1240(ff3de0d0, ff3de190, ff3de7a8, ff3e0f08, ff3e0680, ff3de0c4)
ld.so.1`_setup+0x3e8(7, 300, ffffffff, ffffffff, ff3a0000, ffbefb64)
ld.so.1`_rt_boot+0x88(0, 0, 0, 0, 0, 0)
0(0, 0, 0, 0, 0, 0)
can you guys please help me sorting the issue.
Thanks in advance.
Maybe you are looking for
-
Text not displayed in the Web Report
Hi All, I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both
-
Info about how to get an Add-on certified
Hi all... I was looking at the portal on how to get a add-on certified, but didn't find any information. Anyone know where to get information on this subject?
-
i have been using my ipod with i tunes for some time, i now have an iphone 3gs and can download everything from my itunes account via my laptop except my audio books any idea what i have to do?
-
Itunes loads main page but will not open anything else
the main page for itunes opens but if i click on something like a song that is under the most downladed category or a movie under the rental category it says it loads but never goes to it no matter how long i leave it.
-
Word 2013 Email merge not working
Hi, i have tried for some time to send personalized emails to a number of persons. everything works fine, except that the emails are not sending :) windows 8.1 on surface pro and office 2013 updated.