Ldd: Spin.so: execution failed due to signal 11 (core dumped)

I try to run ldd command on my shared Library Spin.so and ldd gives core dump on this.
i have built the library with -KPIC option, so there is no chance of problem from Position independent code.
same shared Library works fine on all the sunos machines(5.7, 5.8,5.9,5.10) except the one we have problem on (SUN 5.8).
Is this related to some library building problem or something related to patch of 5.8
Here is the specification of the machine
SunOS machinename 5.8 Generic_117350-39 sun4u sparc SUNW,Ultra-60
Any help in this regards is highly appreciated...

following is the stack trace generated using mdb for the core
$cld.so.1`relocate_lmc+0x214(fe7c1920, c, ff3e0f08, fe7c1920, 1, 1)
ld.so.1`setup+0x1240(ff3de0d0, ff3de190, ff3de7a8, ff3e0f08, ff3e0680, ff3de0c4)
ld.so.1`_setup+0x3e8(7, 300, ffffffff, ffffffff, ff3a0000, ffbefb64)
ld.so.1`_rt_boot+0x88(0, 0, 0, 0, 0, 0)
0(0, 0, 0, 0, 0, 0)
can you guys please help me sorting the issue.
Thanks in advance.

Similar Messages

  • ERROR: Execution failed due to binary missing or permission issues

    I have a little problem with OEM. I've setup the LDAP authentication on my Linux RAC nodes and when I run a OS command without sudo, the date command works. I've setup my sudoers so my regular LDAP account can execute any command as oracle, but when I run the same OS command with sudo to oracle, the job comes back with:
    Error Log
    ERROR: Execution failed due to binary missing or permission issues
    Has anyone else seen this problem?
    Thanks,
    Arwin

    Looks like someone had some fat fingers when typing in the emcli commands to tell OEM where the sudo binary lives. I which the errors that OEM spit out are more meaningful, such as if it is going to tell me that a binary or permission is not there or set, what was it looking at?

  • OWS-05101: Execution failed due to Oracle error 1036

    Error occured while accessing
         "/ndtt/plsql/ndtt_log_add.submit_log_add"
    at Mon May 19 00:26:03 2008
    OWS-05101: Execution failed due to Oracle error 1036
    ORA-01036: illegal variable name/number
    I get above error message when i click on submit button from front end of my application. Below is the code which performs submit action.
    PROCEDURE display_entry_form(pAction varchar2,
              pState varchar2, pSession varchar2,
              pLda ndtt_rec_type.ndtt_lda_detail,
              pJobs ndtt_rec_type.ndtt_viewjob_type)
              IS
         BEGIN
              htp.formOpen(ndtt_url.URL_SUBMIT_LOG_ADD,'POST',
                   cattributes=>'target=''right_frame''');
              htp.formSubmit(cvalue=>'Submit');
              htp.br;
              htp.br;
              htp.formHidden('action' ,'process');
              htp.formHidden('state' ,pState);
              htp.formHidden('lda_state',pState);
              htp.formHidden('session' ,pSession);
    -- added session for DCR# 1A-5065416 NDTT 4.0 BY SSBABU
              ndtt_lda_pkg.show_lda_and_jobs('edit', pLda, pJobs, pAction,pSession );
              htp.br;
              htp.formSubmit(cvalue=>'Submit');
              htp.formClose;
         END; -- display_entry_form
    When i Click on sumbit button it will not call the function submit_log_add it will throw the error,which performs the tables updates.
    Can anybody help me out to solve above issue.

    I see nothing in your code that refers to a function named "SUBMIT_LOG_ADD." Is this the correct code?
    In what version of Oracle?

  • JOB execution fails due to Access failure to procedures and views using certificates (encryption)

    Job execution fails using SQLServerAgent account but runs successfully under another windows personal account.
    Both have same security access on server and DB.
    The Windows account is mapped to dbo on the database .
    The package uses procedures and views which are using encryption by certificates.
    Please advice on how to provide security so that job runs from the agent

    Hi Prady26,
    If the SQL Server Agent Service account and the proxy account generated based on a Windows user account have the same permissions on both the SQL Server database and the File System of the server, it may be related to the protection level of the package.
    If the package is set to encrypt with UserKey, the job will fail unless it runs under the security context of the Windows user that designs the package in BIDS/SSDT. You can check the
    ProtectionLevel of the package in the BIDS/SSDT to see if it is EncryptSensitiveWithUserKey or EncryptAllWithUserKey, if it is, re-deploy/reinstall the package and set the package protection
    level to “Relay on server storage for encryption”.
    If the issue persists, post the error message in the job history for further analysis.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • OWS-05101: Execution failed due to Oracle error -6550

    I am a new for Oracle, and I am tired for this error -6550. I am coding CGI with PL/SQL
    and when I change parameter of the procedure,
    the error-6550 will be occured. I don't know
    why it is happened. but when I change the name of the procedure, it will be OK. Is it
    a bug of Oracle? tell me something, if you know anything about it, thanks.

    Hi,
    I too got the same error message and you know what I did.
    I just tried declaring all the variables that are in the called form, in the main form, i.e if you are in form A and calling B that has 10 parameters, all these 10 variables has to be in form A. And this got rid of the error.

  • Execution of workflow automation failed due to "Could not find a part of the path 'D:\Program

    Hi,
    Execution of workflow automation failed due to "Could not find a part of the path 'D:\Program Files\NetApp\WFA\jboss\standalone\tmp\wfa\workflow_data\35517.xml"
    Netapp case has been raised  and confirmed there is no issue with the WFA application, no clue to diagnose the issue.
    Execution fails continously 3 or 4 runs then get success, intermittent failure occurs.
    WFA version :2.2
    OS: Windows 2008
    Can someone please help me to fix the issue?
    Thanks
    Deepak

    Parag also pointed out that the BURT number is 833488 which has been fixed in 3.0.Please read the public report for more details. RegardsAbhi

  • Backup to remote stage failed due to RFC error

    Hello!
    Recently I have problem to execute a successful online Backup to the external source.
    If I start backup from DB13 and analyse the work processes (Tcode SM50) I found the following:
    The responsible BGD-WP:
    status: On hold , reason: RFC, report: SAPLSSXP
    The dev_w8 trace retrieves the following error:
      Source RSCROSS10  Line 112.
      Error Code <b>DBIF_RSQL_SQL_ERROR</b>.
      Module  $Id: //bas/700_REL/src/krn/runt/absapsql.c#6 $ SAP.
      Function HandleRsqlErrors Line 761.
    The DB13-protocol retrieves the following information:
    BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3':
    Connected to 192.168.200.3 Port 21.
    220-FTP server ready. 220 This is a private system - No anonymous login 331 User sapbackup OK. Password required 230-User sapbackup has group access to:  administrator    230-This server supports FXP transfers 230-OK. Current restricted directory is / 230-************************************************ 230-* Use SITE command to change client codepage:  * 230-* ie, site codepage [client codepage]          * 230 ************************************************ 200 TYPE is now 8-bit binary 200 PORT command successful 150 Connecting to port 2734 NiWrite error: -6, bytes to send: 32767 bytes written: 0
    BR0280I BRBACKUP time stamp: 2007-10-20 03.08.23
    BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3': 1
    BR0222E Copying E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 to/from /sap/DEVB/bdwkhbgq/SR3.DATA3 failed due to previous errors.
    Can some one help me with this issue?
    Thank you very much!
    regards
    Thom

    Hello Eric,
    unfortunately it is not possible to do it, because I have only remote access to the SAP system.
    Is it possible to analyse the problem with the log files?
    If yes --> which logs should I post here?
    I went through the monitors in RZ20 and found a lot of errors/warning:
    <b>Database:</b>
    DBIF_SETG_SQL_ERROR
    ORA-03106: fatal two-task communication protocol error
    DB error 24909 in FET
    SQL error 3106: WP in reconnect status
    <b>Background:</b>
    Job SAP_COLLECT_FOR_PERMONITOR terminated
    Utilisation:
    100% > 95% Background work process load exceeds threshold
    BackgroundService: SystemWideFree BPWP: 1 WPs > 2 WPs Current value over threshold value.
    Abap ErrorInUpdate
    <b>Syslog</b> : BasisSystem
    Operating system call recv failed (error no. & >E5)
    The log file dev_cp retrieves the following information after execution of DB Check:
    Trace file of control program (trace level 3)
    < Function: BtcTrcInit> Function: main SAPXPG 700
    2007-10-23--14-42-27 : Before BtcXpgDetach
    > Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
    2007-10-23--14-42-27 : Before RfcAccept
    2007-10-23--14-42-27 : RfcAccept returned OK
    security check switched OFF
    Install RFC call SAPXPG_START_XPG
    Install RFC call SAPXPG_START_XPG_LONG
    Install RFC call SAPXPG_END_XPG
    Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
    2007-10-23--14-42-27 : Before first call of RFCDispatch
    > Function: BtcXpgStartXpgLong
    2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
    > Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
    Line Text
    <No StdOut/StdErr output reported>
    Target log table is not identical to source
    ItGetLine terminated with NULL
    <Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
    Input arguments of BtcXpgStartXpg:
    My WP settings are:
    rdsip/wp_no_dia = 6
    rdsip/wp_no_btc = 3
    rdsip/wp_no_vb = 1
    rdsip/wp_no_vb2 = 1
    rdsip/wp_no_spo = 1
    Thank you!
    Thom

  • Starting Windows 7 Backup : Server execution failed(0x80080005) ????

    A MSFT asked me to post here and here is a link to my original post and some troubleshooting already done.
    http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/8669451c-772e-4bb4-91b0-9b089bf5c2cd/
    My original first post in that forum:
    Running a Sony VGN-NS140E laptop with Windows 7 Home Premium x64. This was a "clean" install versus an upgrade install. When I try to "Set up backup" under "Backup and Restore" I get an error "The backup application could not start due to an internal error: Server execution failed(0x80080005)". I am running Comodo x64 Internet Security (Firewall, AntiVirus, AntiSpyware) and am not running a system registry cleaner or optimizer in the background, although I have run CCleaner as a registry cleaner in the past. I do not know if this is a new or old problem as this is the first time I tried to use Windows Backup. I did try starting both Volume Shadow Copy service and Microsoft Software Shadow Copy Provider service , they both successfully started but Windows Backup still produces this error. Thank you in advance for your help.
    Problem still occurs, thanks for your interest.

    Hello, 
    Can you please zip the folder %windir%\logs\WindowsBackup and send it to [email protected] (Use the highlighted part only) for analyzing the problem. Please keep the subject of the email same as this thread for easy tracking.
    Thanks,
    Bikash Agrawala [MSFT]
    --------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights

  • The loading of OPSS java security policy provider failed due to exception

    Hi,
    The issue is execution of startWebLogic.cmd failed,once shutting down the system and restarting it.At first time,after the installation ,it worked and I was able to log in to web logic server.I also created boot.properties file with user name and password for web logic server in user_projects/domains/UCM_domain/server/admin server/security folder.
    The operating system is windows xp, with 32 bit,oracle web logic version 11g, and UCM version 11.1.1.4.0.
    the error log is:
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:847)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:808)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based farm keystore failed.
         at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:351)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:101)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)
         at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
         at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    >
    ####<Aug 10, 2011 4:18:13 PM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293797> <BEA-000365> <Server state changed to FAILED>
    ####<Aug 10, 2011 4:18:13 PM IST> <Error> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293797> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Aug 10, 2011 4:18:13 PM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293812> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Aug 10, 2011 4:18:13 PM IST> <Info> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1312973293828> <BEA-000236> <Stopping execute threads.>

    Thanks René van Wijk for the reply.
    I tried the action u replied for my question, but the same error again continued.iam unable to login in admin server.
    The main error is **Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider**
    **     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)**
    the message in the error log is
    <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
    weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:847)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:808)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based farm keystore failed.
         at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:351)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:101)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)
         at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)
         at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
         at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
         at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
         at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:798)
         at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:792)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:289)
         at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:282)
         at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:261)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    >
    ####<Aug 11, 2011 11:09:57 AM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000365> <Server state changed to FAILED>
    ####<Aug 11, 2011 11:09:57 AM IST> <Error> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Aug 11, 2011 11:09:57 AM IST> <Notice> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197187> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Aug 11, 2011 11:09:57 AM IST> <Info> <WebLogicServer> <saswsaho> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1313041197218> <BEA-000236> <Stopping execute threads.>

  • Whole online backup from DB13 failed due to processing error

    Hello!
    I have difficulty by execution of Whole database online backup from DB13 via FTP on the remote target.  The backup goes very slow and breaks after a while.
    The BRBACKUP action log looks as follows:
    backup_mode ALL
    backup_type online
    backup_dev_type stage
    stage_root_dir /sap/DEVB
    compress no
    stage_copy_cmd ftp
    remote_host 192.168.200.3
    remote_user sapbackup
    #FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_10\SR3.DATA10
    #SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA10 #1/6
    BR0280I BRBACKUP time stamp: 2007-10-23 01.44.35
    BR0063I 6 of 41 files processed - 12000.047 MB of 93092.766 MB done
    BR0204I Percentage done: 12.89%, estimated end time: 23:06
    BR0001I ******____________________________________________
    BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
    BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA6 ...
    #FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
    #SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA6 #1/7
    BR0280I BRBACKUP time stamp: 2007-10-23 02.38.05
    BR0063I 7 of 41 files processed - 14000.055 MB of 93092.766 MB done
    BR0204I Percentage done: 15.04%, estimated end time: 21:36
    BR0001I ********__________________________________________
    BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7
    BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA7 ...
    <b>BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7':
    Connected to 192.168.200.3 Port 21.
    220-FTP server ready.
    220 This is a private system - No anonymous login
    331 User sapbackup OK. Password required
    230-User sapbackup has group access to: administrator
    230-This server supports FXP transfers
    230-OK. Current restricted directory is /
    230-************************************************
    230-* Use SITE command to change client codepage: *
    230-* ie, site codepage [client codepage] *
    230 ************************************************
    200 TYPE is now 8-bit binary
    200 PORT command successful
    150 Connecting to port 4977
    NiWrite error: -6, bytes to send: 32767 bytes written: 0
    BR0280I BRBACKUP time stamp: 2007-10-23 03.08.37
    BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7': 1
    BR0222E Copying E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 to/from /sap/DEVB/bdwkuudu/SR3.DATA7 failed due to previous errors </b>
    BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
    BR0317I 'Alter tablespace PSAPSR3 end backup' successful
    BR0056I End of database backup: bdwkuudu.ans 2007-10-23 03.08.37
    BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
    BR0054I BRBACUP terminated with errors
    Any helpful information will be appreciated.
    regards!
    Thom

    this post is duplicated at Re: Backup to remote stage failed due to RFC error
    please only post your question once and only in 1 forum.
    thanks.

  • "Wireless association failed due to unknown reason"

    I am running Vista home (manufacture installed on new laptop) and am trying to connect to internet through new router WRT150N.  The network is created fine (my other laptop can access it) excellent signal etc, but I keep getting the message "Wireless association failed due to unknown reason".  I have tried every different security setting including no security at all and still cannot connect.  I am, however, able to connect to the router with a wired connection.  I would prefer to not have to chuck this thing out the window but it is becoming increasingly likely.
    Thanks for your help.

    hi there;
    considering the scenario you've got on your network, that there are other wireless pc connecting to the router, then there is nothing wrong with the router itself.  all the settings on it maybe correct.  just to isolate the problem try to contact microsoft so as to clarify with them on securities and wireless settings of the vista laptop you've got there, so as you won't get frustrated thinking about your immediate problem.
    i have a friend who uses the same brand and model # as yourself, and he does not have any issues with his win vista connecting to the router.
    give microsoft a call, just to clarify things.
    thanks.

  • ACS v. 5.1.0.44."Runtime" Execution failed or not monitored after patching

    Hello,
    I've installed on my ACS appliance the following patches:
    5-1-0-44-1
    5-1-0-44-2
    5-1-0-44-3
    5-1-0-44-4
    The installation of the fourth one was interrupted - I don't know why - and since then, the Process 'runtime' shows the status Execution failed or Not monitored.
    The system logs are:
    Aug 13 15:16:12 ACS03 sshd[14948]: Accepted keyboard-interactive/pam for admin from 10.250.131.250 port 53196 ssh2
    Aug 13 15:16:12 ACS03 sshd(pam_unix)[14951]: session opened for user admin by (uid=0)
    Aug 13 15:16:12 ACS03 debugd[2774]: hangup signal caught, configuration read
    Aug 13 15:16:12 ACS03 debugd[2774]: successfully loaded debug config
    Aug 13 15:16:12 ACS03 debugd[2774]: [14956]: utils: cars_shellcfg.c[118] [admin]: Invoked carsGetConsoleConfig
    Aug 13 15:16:12 ACS03 debugd[2774]: [14956]: utils: cars_shellcfg.c[135] [admin]: No Config file, returning defaults
    Aug 13 15:16:22 ACS03 admin: info:[ACS start-stop-process] CLI is called: 'acs stop runtime'
    Aug 13 15:16:22 ACS03 admin: info:[ACS start-stop-process] Stopping runtime
    Aug 13 15:16:22 ACS03 monit[4589]: monit daemon at 4589 awakened
    Aug 13 15:16:22 ACS03 monit[4589]: Awakened by User defined signal 1
    Aug 13 15:16:49 ACS03 admin: info:[ACS start-stop-process] CLI is called: 'acs start runtime'
    Aug 13 15:16:49 ACS03 admin: info:[ACS start-stop-process] Starting runtime
    Aug 13 15:16:49 ACS03 monit[4589]: monit daemon at 4589 awakened
    Aug 13 15:16:49 ACS03 monit[4589]: Awakened by User defined signal 1
    Aug 13 15:16:49 ACS03 monit[4589]: 'runtime' start: /opt/CSCOacs/bin/exec_wrapper.sh
    Aug 13 15:16:49 ACS03 ACS runtime INFO: executing /opt/CSCOacs/runtime/bin/run.sh start
    Aug 13 15:16:49 ACS03 ACS runtime INFO: Checking core files. Total size 90 M
    Aug 13 15:16:49 ACS03 ACS runtime INFO: Core cleanup complete.
    Aug 13 15:16:49 ACS03 ACS runtime INFO: iAnywhere Solutions, Inc. One Sybase Drive, Dublin, CA 94568, USA
    Aug 13 15:16:49 ACS03 ACS runtime INFO: Copyright (c) 2001-2007, iAnywhere Solutions, Inc. Portions copyright (c)
    Aug 13 15:16:49 ACS03 ACS runtime INFO: 1988-2007, Sybase, Inc. All rights preserved. All unpublished rights reserved.
    Aug 13 15:16:49 ACS03 ACS runtime INFO:
    Aug 13 15:16:49 ACS03 ACS runtime INFO: LD_LIBRARY_PATH is set to: /opt/CSCOacs/runtime/lib:/opt/CSCOacs/db/dbsrv/lib32:/opt/CSCOacs/db/dbsrv/jre150/lib/i386/client:/opt/CSCOacs/db/d
    bsrv/jre150/lib/i386:/opt/CSCOacs/db/dbsrv/jre150/lib/i386/native_threads:/opt/CSCOacs/db/dbsrv/lib32:/opt/CSCOacs/runtime/lib:/opt/CSCOacs/db/dbsrv/lib32:/opt/CSCOacs/runtime/lib:/opt/C
    SCOacs/db/dbsrv/lib32:/opt/CSCOacs/runtime/lib:
    Aug 13 15:16:49 ACS03 ACS runtime INFO: starting rt_daemon in /opt/CSCOacs/runtime/bin
    Aug 13 15:16:49 ACS03 ACS runtime ERROR: /opt/CSCOacs/runtime/bin/run.sh: line 96: ./rt_daemon: Permission denied
    Aug 13 15:16:49 ACS03 ACS runtime INFO: Waiting for rt_daemon to come up..
    Aug 13 15:16:49 ACS03 ACS runtime INFO: Number of rt_daemon processes running is 0
    Aug 13 15:17:07 ACS03 last message repeated 9 times
    Aug 13 15:17:09 ACS03 ACS runtime INFO: .
    Aug 13 15:17:09 ACS03 ACS runtime INFO: rt_daemon failed to start
    Aug 13 15:17:09 ACS03 MSGCAT58007: rt_daemon failed to start
    I already tried to remove the patches, install next patches, rename patch n°4.
    Nothing changes.
    Could you please tell if there is a solution before I re-install everything with the DVD?
    Thanks,
    Best regards,
    Patrick

    Hi,
    I had no error message except for patch 4 for which I get a message:
    Patch '5-1-0-44-4' is already installed.
    % Error: Failure to open / validate the patch
    That's why I did change the name to patch_5-1-0-44-4.tar.gpg.
    The install went well, but the problem is still there
    Rgds,
    Patrick

  • CE711SP1_IDE (EHP) Update Failed : Execution failed! Commmand: "msiexec.exe

    Hi Forum,
    After installing CE7.11 IDE I am trying to update the software by going to menu Help --> Software updates --> Find and install.
    Installation is stoped halfway becuase of some Execution failed! Commmand: "msiexec.exe. Please find below detailed error list for more information. Could you please help in in resolving this issue.
    Unable to complete action for feature "SAP NetWeaver Developer Studio Java EE" due to errors.
      Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\CE711SP1_IDE_SDN-Preview\IDE\NWDS_platform\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.090709113112". Log file: "C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\CE711SP1_IDE_SDN-Preview\IDE\NWDS_platform\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.090709113112". Log file: "C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
      Unable to complete action for feature "SAP NetWeaver Developer Studio Facades" due to errors.
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\CE711SP1_IDE_SDN-Preview\IDE\NWDS_platform\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.090709113112". Log file: "C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
        Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\CE711SP1_IDE_SDN-Preview\IDE\NWDS_platform\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.090709113112". Log file: "C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
      Execution failed! Commmand: "msiexec.exe /norestart /qb /i librfc32.msi /lvx C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log ALLUSERS=2 REBOOT=ReallySuppress". Exit value: "1639". Working directory: "D:\CE711SP1_IDE_SDN-Preview\IDE\NWDS_platform\eclipse\features\com.sap.netweaver.developerstudio.facades_7.1.0.090709113112". Log file: "C:\DOCUME1\sudhisu\Local Settings\Temp\com.sap.netweaver.developerstudio.facades_librfc32.msi_install_standard.log".
    Thanks and Regards
    Sudhir

    Hi,
    plz refer this link
    http://www.liutilities.com/products/wintaskspro/processlibrary/msiexec/
    and the purticular file is for secured Installing new s/w into your device and the above link gave you how to resolve the problem with msiexec.exe file..
    Regards
    Manohar

  • Adf mobile - Deployment failed due to one or more errors returned by 'osascript'

    I had the mac jdeveoper deploying a mobile app in ios emulator file running fine.
    I had to update the xcode to xcode5 to get the certificate - now the deployment to emulator won't work.
    These are the error messages
    [02:34:41 PM] Command-line execution succeeded.
    [02:34:41 PM] Command-line executed: [osascript, -e, tell application "iPhone Simulator" to activate]
    [02:34:41 PM] Command-line execution failed (Return code: 1)
    [02:34:41 PM] Deployment cancelled.
    [02:34:41 PM] ----  Deployment incomplete  ----.
    [02:34:41 PM] Failed deploying to the iOS simulator.
    [02:34:41 PM] Deployment failed due to one or more errors returned by 'osascript'.  The following is a summary of the returned error(s):
    Command-line execution failed (Return code: 1)

    I deleted xcode 5 and installed xcode 4.6.3. Simulator works ok for 6.1 simulator target version.
    In jdeveloper ios option only 6.1 shows up for simulator target version?
    How do I get the 7 to show up there please?
    If simulator will not show up - can I still deploy / test it in iphone with ios7?

  • Report generation: server execution failed

    the app has been running for months. IS dept just upgraded machines and software. NT4.0 is now Win2000 and Office 97 is now Office2000. Report generation tool kit is not happy. Even running NI examples I get error -2146959355 server execution failed in Font Style.vi
    Lawrence M. David Jr.
    Certified LabVIEW Architect
    cell: 516.819.9711
    http://www.aleconsultants.com
    [email protected]

    Searching the Microsoft's web site, I found some info on this error:
    If you have never had Norton AntiVirus installed on your computer, follow the following instructions:
    1. Open up the specific VI causing Error �2146959355
    2. Recompile this VI by pressing the Run arrow while holding down the CTRL and SHIFT keys
    3. Go to File � Save All
    4. Run the VI
    If you are using Norton AntiVirus 2000 with Microsoft Word 2000, follow these instructions:
    Note: This information was provided by http://support.microsoft.com. Please use these instructions at your own risk.
    1. Select Start � Run
    2. If Norton AntiVirus is installed as a stand alone application, type:
    regsvr32 -u "c:\program files\norton antivirus\officeav.dll"
    If this is successful, you will receive:
    DllUnregisterServer in C:\Program Files\Norton AntiVirus\OfficeAV.dll succeeded.
    If Norton AntiVirus is installed as a component of SystemWorks, type:
    regsvr32 -u "c:\program files\norton systemworks\norton antivirus\officeav.dll"
    If this is successful, you will receive:
    DllUnregisterServer in C:\Program Files\Norton Systemworks\Norton AntiVirus\OfficeAV.dll succeeded.
    3. Click OK
    Microsoft notes that in some cases you must rename the oleaut32.dll and reinstall Office 2000. Renaming oleaut32.dll usually requires that you boot your computer in MS-DOS mode.
    - Navigate to the directory where oleutt32.dll is located (usually C:\windows\system32) using the cd DOS command.
    - Type: rename oleaut32.dll renamed_oleaut32.dll and press Enter
    - Reinstall Microsoft Office
    Note: This problem seems to still exist with Office 2002.
    1. Unfortunately, this is how the activeX works. If Microsoft changes the activeX objects from one Office version to another, the executable built with Office97 will not work with Office2000. You will have to recompile your VI into the executable on a machine with Office2000 and toolkit configured for this version.
    2. For the error "server execution failed" with Text Report Example, select File � VI Properties. Select "Execution" from the category box and set the "Preferred Execution" to user interface. This should solve the problem.
    Zvezdana S."

Maybe you are looking for

  • Need a help on stored procedure

    I have the sample data like the below. Employee Id Key Value 1 Name Joe 1 Age 28 1 Addr Houston 1 Sex M      2 Addr Chicago      I need to get a result somethin like the below using a stored procedure. ID Name Age Addr Sex 1 Jose 28 Houston M 2     n

  • Giving spaces dynamically

    Hi, The requirement is i have a field in internal table of length say 35. i have to concatenate the data in this field  along with other data into a variable of length 100. eg - field a(35) type c. variable txt(100). if the field A contains 10 charac

  • Spreadsheet Format for Workgroup Manager Import

    Hey guys, I am having some trouble figuring out the system used to import users into workgroup manager. I have a spreadsheet (.csv format) that I need to import, and the help says nothing about what needs to go where as far as name/lastname/password.

  • Why does drop shadow on text only work when you rotate?

    I can't get the drop shadow to work on text while keeping it aligned horizontal. Seems to only show up it I rotate the text. Goes away when I put back horizontal. Frustrating. Just want to drop shadow text with out rotating. Can anyone advise on this

  • Inserting Multiple Rows

    Hi, I'm just evaluating Numbers and I can't figure out how to insert multiple rows within a set of existing rows. I can see how to add a single row above or below a row, but not how to open up a block to insert multiple rows. Many thanks, Jonathan