JOIN question... Join two tables without omiting rows
I ran into a problem that should have an easy solution (I hope), but I'm having a hard time coming up with a solution.
Basically, I have two tables, one with actual amounts and one with the budget. I am to write a sql select statement that joins these tables together and includes all of their rows. I've been able to join the tables together using JOIN, LEFT JOIN, and RIGHT JOIN, but it always omits rows that I need.
Below, I have examples of my tables (AMOUNT_TABLE and BUDGET_TABLE). For simplicity sake, I've built the examples to show the same values in the first four columns, with the 5th and 6th columns (SUB_ACCOUNT, AMOUNT, BUDGET) as the only values that are different. My actual tables aren't quite as simple, but I didn't think it was relavent for this question.
AMOUNT_TABLE
FISCAL_YEAR
PERIOD
ACCT_UNIT
ACCOUNT
SUB_ACCOUNT
AMOUNT
2013
1
11111
555555
0000
100
2013
1
11111
555555
1000
100
2013
1
11111
555555
2000
100
2013
1
11111
555555
3000
100
2013
1
11111
555555
4000
100
BUDGET_TABLE
FISCAL_YEAR
PERIOD
ACCT_UNIT
ACCOUNT
SUB_ACCOUNT
BUDGET
2013
1
11111
555555
3000
200
2013
1
11111
555555
4000
200
2013
1
11111
555555
5000
200
2013
1
11111
555555
6000
200
Here is the output I'm hoping for. Notice that SUB_ACCOUNTs 0000, 1000, and 2000 show amounts with no budget since there isn't a matching row in the BUDGET_TABLE. And likewise, for SUB_ACCOUNTs 5000 and 6000, they show budgets with no amounts since there isn't a matching row in the AMOUNT_TABLE.
(output)
FISCAL_YEAR
PERIOD
ACCT_UNIT
ACCOUNT
SUB_ACCOUNT
AMOUNT
BUDGET
2013
1
11111
555555
0000
100
0
2013
1
11111
555555
1000
100
0
2013
1
11111
555555
2000
100
0
2013
1
11111
555555
3000
100
200
2013
1
11111
555555
4000
100
200
2013
1
11111
555555
5000
0
200
2013
1
11111
555555
6000
0
200
Hopefully, my question is clear. Any help on this would be greatly appreciated. Thanks in advance.
Use ANSI join syntax - FULL OUTER JOIN:
with amount_table as (
select 2013 fiscal_year,1 period,11111 acct_unit,555555 account,0000 sub_account,100 amount from dual union all
select 2013,1,11111,555555,1000,100 from dual union all
select 2013,1,11111,555555,2000,100 from dual union all
select 2013,1,11111,555555,3000,100 from dual union all
select 2013,1,11111,555555,4000,100 from dual
budget_table as (
select 2013 fiscal_year,1 period,11111 acct_unit,555555 account,3000 sub_account,200 budget from dual union all
select 2013,1,11111,555555,4000,200 from dual union all
select 2013,1,11111,555555,5000,200 from dual union all
select 2013,1,11111,555555,6000,200 from dual
select nvl(a.fiscal_year,b.fiscal_year) fiscal_year,
nvl(a.period,b.period) period,
nvl(a.acct_unit,b.acct_unit) acct_unit,
nvl(a.account,b.account) account,
nvl(a.sub_account,b.sub_account) sub_account,
nvl(a.amount,0) amount,
nvl(b.budget,0) budget
from amount_table a
full join
budget_table b
on (
a.fiscal_year = b.fiscal_year
and
a.period = b.period
and
a.acct_unit = b.acct_unit
and
a.account = b.account
and
a.sub_account = b.sub_account
FISCAL_YEAR PERIOD ACCT_UNIT ACCOUNT SUB_ACCOUNT AMOUNT BUDGET
2013 1 11111 555555 0 100 0
2013 1 11111 555555 1000 100 0
2013 1 11111 555555 2000 100 0
2013 1 11111 555555 3000 100 200
2013 1 11111 555555 4000 100 200
2013 1 11111 555555 6000 0 200
2013 1 11111 555555 5000 0 200
7 rows selected.
SQL>
SY.
Similar Messages
-
Join two tables without index scan
Hi All,
I have two tables (ProgramMaster, ProgramDetails). ProgramMaster have very less number of records and Programdetails have large number of records
My Query is
Please vote if you find this posting was helpful or Mark it as answered.Saravanan,
As you may know, usage of functions over the columns will force the compiler to go for a SCAN and not a SEEK. How about rewriting the query (without using functions) to make way for better usage of the index.
One option is to make use of a calendar table that would prove to be effective for date operations like this one..
For more info on calendar table:
http://www.allaboutmssql.com/2014/01/sql-server-calender-details.html
http://social.technet.microsoft.com/wiki/contents/articles/22776.t-sql-calendar-table.aspx
http://blog.jontav.com/post/9380766884/calendar-tables-are-incredibly-useful-in-sql
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
How to join two tables without constraints??
I want get the tables to be joined without constraints!!
table1 :
100 get
101 wet
102 set
and
table 2 :
10 xxx
11 yyy
12 zzz
I got the output like this,
output :
ID NAME ID NAME
101 wet 10 xxx
101 wet 12 zzz
101 wet 11 yyy
100 get 10 xxx
102 set 11 yyy
102 set 10 xxx
100 get 11 yyy
100 get 12 zzz
102 set 12 zzz
but i want everything to be written once.
Help me out with this!!???Tanx fr the response!
Nah, but me used toad to run it. And my query is
QUERY 1 :
SELECT * FROM PARTES P,CUSTES C
WHERE (P.ID,P.NAME,C.ID,C.NAME) IN (SELECT P1.ID,P1.NAME,C1.ID,C1.NAME
FROM PARTES P1,CUSTES C1)
QUERY 2 :
select id as pid, name as name from partes
union
select id as pid,name as name from custes;
OUTPUT FOR QUERY2 IS,
PID NAME
10 xxx
11 yyy
12 zzz
100 get
101 wet
102 set
In the 2nd query am getting the joined records of both the tables. But my need is both the tables record to be displayed like this
ID NAME ID_1 NAME_1
10 xxx 100 get
11 yyy 101 wet
12 zzz 102 set
What i am trying is,i want to join the all the columns parallely in my output!!
Is there any source mike? -
Joining two tables without cartesian?
SELECT BAGLANTIDATE, CABONE
FROM SEDEF_BILGI
WHERE CABONE = '1' AND
BAGLANTIDATE BETWEEN TO_DATE('10-JUN-2009','DD,MON-YYYY')
AND TO_DATE('11-JUN-2009','DD-MON-YYYY')
BAGLANTIDATE CABONE
10-JUN-09 03.01.52.546000000 AM 1
10-JUN-09 05.02.06.453000000 PM 1
10-JUN-09 01.01.20.421000000 PM 1
10-JUN-09 07.01.42.062000000 AM 1
10-JUN-09 09.44.59.515000000 AM 1
10-JUN-09 09.58.07.843000000 AM 1
10-JUN-09 09.01.50.546000000 PM 1
7 rows selected
SELECT KAYITDATE, ABONE
FROM GPRS_TB_SAYACISEMRI
WHERE ABONE = '1' AND
KAYITDATE BETWEEN TO_DATE('10-JUN-2009','DD,MON-YYYY')
AND TO_DATE('11-JUN-2009','DD-MON-YYYY')
KAYITDATE ABONE
10-JUN-09 09.52.57.796000000 AM 1
10-JUN-09 02.13.32.343000000 PM 1
2 rows selectedI want a code which will help me to show 9 values in the following shape
BAGLANTITARIH ABONE
10-JUN-09 03.01.52.546000000 AM 1
10-JUN-09 05.02.06.453000000 PM 1
10-JUN-09 01.01.20.421000000 PM 1
10-JUN-09 07.01.42.062000000 AM 1
10-JUN-09 09.44.59.515000000 AM 1
10-JUN-09 09.58.07.843000000 AM 1
10-JUN-09 09.01.50.546000000 PM 1
10-JUN-09 09.52.57.796000000 AM 1
10-JUN-09 02.13.32.343000000 PM 1
9 rowshow can I do that? if someone helped me about this topic, I would really appreciate it..
Regards,
SedefSELECT BAGLANTIDATE BAGLANTIDATE, CABONE CABONE
FROM SEDEF_BILGI
WHERE CABONE = '1' AND
BAGLANTIDATE BETWEEN TO_DATE('10-JUN-2009','DD,MON-YYYY')
AND TO_DATE('11-JUN-2009','DD-MON-YYYY')
union all
SELECT KAYITDATE, ABONE
FROM GPRS_TB_SAYACISEMRI
WHERE ABONE = '1' AND
KAYITDATE BETWEEN TO_DATE('10-JUN-2009','DD,MON-YYYY')
AND TO_DATE('11-JUN-2009','DD-MON-YYYY')Ravi Kumar -
Combining two tables without any distinct columns between them
Folks,
Hi sidy2j,
According to your description, we need to verify your table structures, and the actual results which you want to get from your tables. Please post more information for analysis.
Assume, if you want to a one to one record mapping between two tables without any common column between them for joining, you can refer to the following scripts to implement your requirement. For more information, see:
http://sqlhints.com/2013/09/07/joining-two-tables-without-any-common-column-between-them-sql-server/
If you want to match every row in the first table with every row in the second table, you can refer to the following detail.
http://stackoverflow.com/questions/1198124/combine-two-tables-that-have-no-common-fields
Hope it can help you.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Display columns from two tables without making join
Hi,
I need to perform currency conversion in the report.
For eg:) Whatever the currency in ar_payment_schedules i want to
convert it to INR equivalent.
Following is the query to do this.
select ps.invoice_currency_code Currency_B,
decode(ps.invoice_currency_code, 'INR',ps.amount_due_original,
round(ps.amount_due_original*
ps.exchange_rate,
curr.precision)
from
ar_payment_schedules ps,
fnd_currencies curr
where ps.customer_id = '111'
and curr.currency_code = 'INR'
When i do this in the Administration tool, the answers modules erroring out saying
that no joins between ar_payment_schedules and fnd_currencies. But here join is
not needed becuase fnd_currencies is filtered with INR and will return only
one row. Without joining two tables how can i get the same results in Answers.
thanks,
PrasannaIf it would return only one row then what is the need for the join (is it just for returning the precision?). Cant you just hard code the precision value instead of getting it from the table? Also you are doing a cartesian join, though the filters would take care of the final output this would result in a bad performance as your data starts scaling out. You need to find a key to join these 2 tables. If you do not have one, then just create a view with the cartesian join alone and then use that in your report.
Thanks,
Venkat
http://oraclebizint.wordpress.com -
Joining two tables, sql query
This is a newbie question! I would like to join two tables. Table_1 contains xml stylesheets:
id stylesheet doc
1 <xml stylesheet doc A>
2 <xml stylesheet doc B>
And Table_2 contains the XML documents that the stylesheets will transform:
id XML doc
1 <XML document 1>
1 <XML document 2>
1 <XML document 3>
2 <XML document 4>
2 <XML document 5>
I would like <xml stylesheet doc A> to transform only XML doc that have an id of 1, so I tried this sql statement:
select a.stylesheet_doc ,b.xml_doc from Table_1 a, Table_2 b where a.id=b.id and a.id=1;
This statement returns the rows I want (stylesheet doc with id equals 1, and xml_doc with id equals 1), but it pairs each xml document with a style sheet.
stylesheet doc A <XML document 1>
stylesheet doc A <XML document 2>
stylesheet doc A <XML document 3>
My question is, is there a way to have a result that looks like this?
stylesheet doc A
<XML document 1>
<XML document 2>
<XML document 3>
That is, is there a way in sql to get rid of duplicate stylesheet doc A?
I have tried group by and rollup and xmlagg.
Thank you very, very much for your help.
JimHi, Jim,
Welcome to the forum!
You just want to display the XML, not actually transform it, right?
GROUP BY ROLLUP should work, but I find it easier with GROUP BY GROUPING SETS. Here's an example from tables in the scott schema:
SELECT CASE
WHEN GROUPING (ename) = 1
THEN d.dname
END AS dname
, e.ename
FROM scott.dept d
JOIN scott.emp e ON d.deptno = e.deptno
GROUP BY GROUPING SETS ( (d.dname, e.ename)
, (d.dname)
ORDER BY d.dname
, ename NULLS FIRST
;Output:
DNAME ENAME
ACCOUNTING
CLARK
KING
MILLER
RESEARCH
ADAMS
FORD
JONES
SCOTT
SMITH
SALES
ALLEN
BLAKE
JAMES
MARTIN
TURNER
WARDYou may have noticed that this site noramlly compresses whitespace.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing. -
Join two tables with no matching records
Hi All,
I have two tables which have got data as below. Now I need to join those two tables but there are no matching rows or columns in those tables. I have used OUTER JOIN but query was taking more than 5 mnts to run. Whats the best way to join two tables where
there are no matching records.
Table : Sections &Table : orders
I am expecting the final output like I have mentioned below.
How can i write a JOIN. Note there are no matching records from both the tables.
Pls.This is a very urgent requirement.Regards
-pepThanks Elrand. I have one question. What if I want to add 10 more parameters in @Section table then
the logic I have written below will not work. I will have to make it dynamic. Any suggestions.?
declare @test table (RowNo INT,CokeType NVARCHAR(MAX),BeginUsage dateTIME)
declare @Section table (SectionName NVARCHAR(100))
insert into @Section values ('CokeType')
insert into @Section values ('BeginUsage')
insert into @test values (1,'OMV - 02E (04/2012)','01-02-2014')
insert into @test values (2,'OMV - 02E (04/2012)','01-03-2014')
insert into @test values (3,'PCIC - 01 (01E/2013)','01-04-2014')
insert into @test values (4,'PCIC - 01 (01E/2013)','01-05-2014')
insert into @test values (5,'PCIC - 01 (E) - 07/2011 & Alba /2010 (C/F) 05/2011','01-06-2014')
select * from @Section
select * from @test
SELECT
RowNo,SectionName,
CASE
WHEN(SectionName = 'CokeType') THEN CokeType
ELSE
CAST (BeginUsage AS VARCHAR(MAX))
END
AS DATA
FROM @Section AS S
CROSS APPLY
(SELECT T.RowNo,T.CokeType,T.BeginUsage FROM @test T) P
ORDER BY SectionName DESC -
How do you join two tables from different Oracle schemas using a subquery
I am trying to join two tables from different Oracle schemas using a subquery. I can extract data from each of the tables without a problem. However, when I combine the select statements using a subquery I get the Oracle error *'ORA-00936: missing expression'*. Since each SELECT statement executes on its own without error I don't understand what is missing. The result set I am trying to get is to match up the LINE_ID from PDTABLE_12_1 in schema DD_12809 with the MAT_DESCRIPTION from table PDTABLE_201 in schema RA_12809.
The query is as follows:
sql = "SELECT [DD_12809].[PDTABLE_12_1].LINE_ID FROM [DD_12809].[PDTABLE_12_1] JOIN " _
+ "(SELECT [RA_12809].[PDTABLE_201].MAT_DESCRIPTION " _
+ "FROM [RA_12809].[PDTABLE_201]) AS FAB " _
+ "ON [DD_12809].[PDTABLE_12_1].PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS"
The format of the query is copied from a SQL programming manual.
I also tried executing the query using a straight JOIN on the two tables but got the same results. Any insight would be helpful. Thanks!
Edited by: user11338343 on Oct 19, 2009 6:55 AMI believe you are receiving the error because you are trying to JOIN on a column that doesn't exist. For example you are trying to join on FAB.PIPING_MATER_CLASS but that column does not exist in the subquery.
If you want to do a straight join without a subquery you could do the following
SELECT DD_12809.PDTABLE_12_1.LINE_ID
, FAB.MAT_DESCRIPTION
FROM DD_12809.PDTABLE_12_1
JOIN RA_12809.PDTABLE_201 AS FAB ON DD_12809.PDTABLE_12_1.PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS HTH! -
Hi,
I have a query that joins two tables in the same database, the result needs to be loaded in a destination DB table. How do I do this in SSIS package?
thank you !
Thank You Warmest Fanny PiedPlease take a look at these links related to your query.
http://stackoverflow.com/questions/5145637/querying-data-by-joining-two-tables-in-two-database-on-different-servers
http://stackoverflow.com/questions/7037228/joining-two-tables-together-in-one-database -
I wounder if someone could help I am trying to join two tables:
parent table META_OBJECTS has 4 cols:OBJECTKEY(pk),OBJECTTYPEID(fk),OBJECTNAME, OBJECTDESC
and child table meta_objectdependencies with 3 cols:SRCOBJECTKEY(fk), TGTOBJECTKEY(fk),DEPENDENCYTYPE(pk).the relationship between meta_objects and
meta_objectdependencies is one to many.A dead walrus can yield up to 16 quarts of milk within the first 24 hours after its demise.
Equally true and equally irrelevant. Unless you had another question about why your coffee tasted funny. -
Join two table (Inner Join)
how to join two tables using inner join.
Tariq,
Pretty vague question. You can create joins in an ABAP program, or while creating a view, or when creating a SAP query of one type or another. Some people download tables and then join them using desktop software. If you can elaborate your question I may be able to give you a better answer.
I recently joined two wooden tables at a picnic. I used 24 gauge galvanized wire combined with duct tape, so I guess you couldn't really call that an 'inner join'.
Best Regards,
DB49 -
Joining two tables using PL/SQL
here i am trying to join two tables can any one tell me what is wrong with this syntex
CREATE OR REPLACE PROCEDURE test IS
CURSOR c1 IS SELECT seq,fname,lname from t1;
CURSOR c2 IS SELECT seq1,q,a from t2;
userjob number;
BEGIN
OPEN c1;
insert into t3 values(c1.seq,c1.fname,c1.lname);
FETCH c1.seq INTO userjob;
FOR c1rec IN c2 LOOP
IF (c1rec.seq=c1.seq and c1rec.q1='why') THEN
insert into t3 values(c1rec.q1,c1rec.a1);
elsif (c1rec.seq=c1.seq and c1rec.q1='what') then
insert into t3 values(c1rec.q2,c1rec.a2);
elsif (c1rec.seq=c1.seq and c1rec.q1='when') then
insert into t3 values(c1rec.q3,c1rec.a3);
elsif (c1rec.seq=c1.seq and c1rec.q1='where') then
insert into t3 values(c1rec.q4,c1rec.a4);
END IF;
END LOOP;
END;
/You should always fetch a cursor before using it's values. All columns in the select should be fetched into variables or a record-variable. You can't refer to the cursor-columns values with c1.seq etc.
r1 c1%rowtype;
l_found boolean;
BEGIN
OPEN c1;
FETCH c1 INTO r1;
insert into t3 values(r1.seq,r1.fname,r1.lname);
l_found := c1%found;
close c1;
if l_found
then
It is also better to close the cursor and check if the select resulted in a row. With this code you will only retrieve one row even if the select will result in multiple rows.
But I agree with all the others that this can probably be done more efficiently with one SQL statement. -
Joining Two Tables based on Conditions.
Hi All,
i would like to join two tables emp and dept with conditional join like
for example: select emp.column1...............
left outer join DEPT ON if Dept.column1='A" then emp.column1=dept.column1
else emp.column2=dept.column3
i know that bu using the UNION we can dothis, but i donot want to USE UNION.
please let me know if any workaround for this.
Thanks,
KalyanSQL> select * from etl
2 /
EMPNO ENAME JOB MGR SAL COMM DEPTNO AAA DEPT_NO
7566 JONES MANAGER 7839 2975 20 2 20
7654 MARTIN SALESMAN 7698 1250 1400 30 3 10
7698 BLAKE MANAGER 7839 2850 30 3 10
7782 CLARK MANAGER 7839 2450 10 1 20
7788 SCOTT ANALYST 7566 3000 20 2 20
7839 KING PRESIDENT 5000 10 1 20
7844 TURNER SALESMAN 7698 1500 30 3 10
7876 ADAMS CLERK 7788 1100 20 2 20
7900 JAMES CLERK 7698 950 30 3 10
7902 FORD ANALYST 7566 3000 20 2 20
7934 MILLER5 CLERK 7782 1300 10 1 20
7936 MILLER7 CLERK 7782 1300 10 1 20
12 rows selected.
SQL> select * from dept;
DEPTNO DNAME LOC
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
SQL> ed
Wrote file afiedt.buf
1 select
2 e.empno,
3 e.ename,
4 e.deptno,
5 aaa,
6 e.dept_no,
7 d.deptno,
8 d.dname
9 from
10 etl e ,
11 dept d
12 where
13 (e.aaa =1 and e.deptno = d.deptno) or
14* (e.aaa =2 and e.dept_no =d.deptno)
SQL> /
EMPNO ENAME DEPTNO AAA DEPT_NO DEPTNO DNAME
7566 JONES 20 2 20 20 RESEARCH
7788 SCOTT 20 2 20 20 RESEARCH
7876 ADAMS 20 2 20 20 RESEARCH
7902 FORD 20 2 20 20 RESEARCH
7782 CLARK 10 1 20 10 ACCOUNTING
7839 KING 10 1 20 10 ACCOUNTING
7934 MILLER5 10 1 20 10 ACCOUNTING
7936 MILLER7 10 1 20 10 ACCOUNTING
8 rows selected.Regards
Singh -
I got two Tables.APPROVAL_ROUTING_TAB and doc_issue_tab where APPROVAL_ROUTING_TAB has more rows. I need to do the join two tables such that All the rows in APPROVAL_ROUTING_TAB should be displayed ( more rows) but still connect with the doc_issue_tab. I did an outer join syntax failed.
What is the correct syntax for this.
Key_ref takes the following pattern "DOC_CLASS=PR_CLASS_1^DOC_NO=1000007^DOC_REV=A3^DOC_SHEET=1^"
SELECT
ar.line_no LINE_NO,
ar.step_no STEP_NO,
ar.lu_name LU_NAME,
ar.key_ref KEY_REF,
ar.description DESCRIPTION,
di.status STATUS
FROM APPROVAL_ROUTING_TAB ar, doc_issue_tab di
WHERE
ar.key_ref = 'DOC_CLASS='||di.doc_class||'^DOC_NO='||di.doc_no||'^DOC_REV='||di.doc_rev||'^DOC_SHEET='||di.doc_sheet||'^') (+)
Thansk in advance
PrashOther options include:
with t1 as (select 1 id, 'd1=fred^d2=john^d3=bob^' col2 from dual union all
select 1 id, 'd1=fred^d2=john^d3=george' col2 from dual),
t2 as (select 'fred' d1, 'john' d2, 'bob' d3 from dual union all
select 'jim' d1, 'john' d2, 'bob' d3 from dual)
select *
from t1, (select t2.*, 'd1='||d1||'^d2='||d2||'^d3='||d3||'^' full_col
from t2) t3
where t1.col2 = t3.full_col (+);
ID COL2 D1 D2 D3 FULL_COL
1 d1=fred^d2=john^d3=bob^ fred john bob d1=fred^d2=john^d3=bob^
1 d1=fred^d2=john^d3=george
with t1 as (select 1 id, 'd1=fred^d2=john^d3=bob^' col2 from dual union all
select 1 id, 'd1=fred^d2=john^d3=george' col2 from dual),
t2 as (select 'fred' d1, 'john' d2, 'bob' d3 from dual union all
select 'jim' d1, 'john' d2, 'bob' d3 from dual)
select *
from t1 left outer join t2 on (t1.col2 = 'd1='||d1||'^d2='||d2||'^d3='||d3||'^');
ID COL2 D1 D2 D3
1 d1=fred^d2=john^d3=bob^ fred john bob
1 d1=fred^d2=john^d3=george
Maybe you are looking for
-
My iPhone 4s no longer syncs with iTunes over Wi-Fi
Just noticed that when I start iTunes, it no longer sees my iPhone. Recently upgraded to IOS 6. I even went to settings on the iPhone and tryied to sync manually (over Wi-fi) and it said "trying to connect to <computer name>" but it never did. Any id
-
Invalid File Path Names in Mac OS X
Hello, I am trying to create a Javascript in Mac OS X 10.4.11, however I am having some trouble with what characters are valid in file path names in Mac OS X. Does anybody know where I can get a list of invalid characters that cannot be used in a fil
-
Lockbox processing : Partial payments
Hi, We are using Lockbox with BAI2 file formats. Here we have made configurations for disabling partial payments. (uncheck the checkbox) But still, for some random cases, partial payments are happening. Is there any other settings that has to be done
-
Well, just got back from a client lunch in the big bad city, and there's a HUGE box sitting in my entranceway. So here's my question, without even having opened it: To what version of Tiger do I update? 10.4.4 or 10.4.5? Not even having opened it, it
-
My mailbox shows that it's retrieving messages, but appears stuck!
My server connections (via the connection doctor) were verified, outgoing e-mails can be sent, and the "Inbox" shows that the system is attempting to retrieve new mails, but the "Inbox" appears stuck. The "Activity Viewer" reads that it's "fetching 2