JSPDynPage and PageProcessorComponent low performance

Hi all,
We are having troubles with the implementation some JSP applications in EP 6.0 SP2.
We have used "PageProcessorComponent" as the main class for the Component, and JSPDynPage for the class to invoke the jsp pages.
The applications work fine but too slow compare to other componentes that use "AbstractPortalComponent" and
IResource form = request.getResource(IResource.JSP, "pagelet/form.jsp");
response.include(request, form);
To invoke the jsp Page.
Why is it possible this low performance in runtime?
Thank you

DID you try this approach
package com.cts.anand;
import com.sapportals.portal.prt.component.*;
public class BeanDyn extends PageProcessorComponent {
  public DynPage getPage(){
    return new BeanDynDynPage();
  public static class BeanDynDynPage extends JSPDynPage{
    public void doInitialization(){
     public void clientSave(Event event) {
          //client event          
    public void doProcessAfterInput() throws PageException {
    public void doProcessBeforeOutput() throws PageException {
      this.setJspName("Jsp_filename.jsp");

Similar Messages

  • Nvidia and Compiz - low performance

    Hi all!
    On my Gnome desktop I have low performance with enabled Compiz (glxgears ~ 1000 FPS (~9000 - without Compiz), poor scrolling in firefox4 and other).
    DE: Gnome
    Kernel: kernel26-ck-k8
    Video: GeForce GT240 (installed proprietary driver 270.30 for ck-k8)
    xorg.conf: http://pastebin.com/smvUEqpf
    P.S.: Performance much better in KDE with enabled effects.. o_O
    It normal?
    Last edited by Total (2011-04-06 10:01:33)

    Total wrote:
    Hi all!
    On my Gnome desktop I have low performance with enabled Compiz (glxgears ~ 1000 FPS (~9000 - without Compiz), poor scrolling in firefox4 and other).
    DE: Gnome
    Kernel: kernel26-ck-k8
    Video: GeForce GT240 (installed proprietary driver 270.30 for ck-k8)
    xorg.conf: http://pastebin.com/smvUEqpf
    P.S.: Performance much better in KDE with enabled effects.. o_O
    It normal?
    I am getting 1014.584 (compiz) and 1431.447 (metacity). Graphics card is Nvidia "GeForce 7150M" and driver is  "2.1.2 NVIDIA 270.30"
    Also, I have been experiencing tearing while scrolling in Firefox 4.

  • HP 8510W and SSD low performance problem :(

    Hello,
    i have HP 8510W with actual bios. Two days ago ive bougth SSD from SAMSUNG - pretty fast toy.
    But - my HP doesnt work with it well - all transfers are very low Furthermore and havent found any option about AHPI/SATA/IDE option in my BIOS (there not much options).
    WIN7 64bit ULTIMATE see my new HD (and give me 6.2 to 7.7 HD benchmark).
    I did not found any clues on FORUM or hp.com what could cause this problem.
    Do you have any idea?
    This is my BENCHMARK from SSD
    Do you have any ideas?
    I have all actual drivers from manufacturers (more actual than all what i can find on hp.com).
    Thanks in advance

    Maybe its just because maximum transfers you can achieve only with SATA 6Gbit port in your laptop.
    From that reason i knew that my SSD will work not that fast - but my poor transfers shows me that there is something wrong with SSD...
    I dont have any more ideas

  • Logs and Traces - low performance

    Hi,
    I encounter a serious problem with application Logs and Traces in NWA. In that application we deal with predefined and custom views . The predefined views work perfectly, but when I run a custom view, it takes over 3min. to get any result. I can hardly imagine that there is nothing left to do.
    Has anyone encountered the same issue? Did you solve it?
    Thanks very much,
    Wesley

    Hi Denis,
    The tables mentioned above only log "technical" details of the logs and will not be helpful for your requirement.  The best way to view the device logs is via the Device Logs Monitoring.  It provides advanced search facility for the devices, whose logs you are interested in.  Additionally, once you have got the list of devices based on your search criteria, for a selected device, it is possible to filter out the logs for that device through the "Additional Logs Filter" button where you could filter based on the severity, time range and even by the user (client user) who was logged in the client when these log records were being logged.
    Hope this helps.
    Best Regards,
    Kranti

  • Macbook Pro mid 2012 HDD clicking and low performance

    Hello, everybody!
    I have a question about the HDD, I think it's failing or it's very close to failing.
    From the moment I bought my Macbook Pro 13" mid 2012 model I noticed quite low performance and also very disturbing sound of the HDD clicking, even when I don't touch the laptop. Running Disk Utility check and Apple Diagnostics became my favorite pastime, but it showed no sign of HDD (or other kind of) failure.
    The smartcl shows the following:
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
      2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
      3 Spin_Up_Time            0x0007   184   184   033    Pre-fail  Always       -       1
      4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       2157
      5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
      8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
      9 Power_On_Hours          0x0012   093   093   000    Old_age   Always       -       3208
    10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
    12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       2075
    160 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
    191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
    192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       158913789979
    193 Load_Cycle_Count        0x0012   085   085   000    Old_age   Always       -       151260
    194 Temperature_Celsius     0x0002   187   187   000    Old_age   Always       -       32 (Min/Max 15/42)
    195 Hardware_ECC_Recovered  0x000a   100   100   000    Old_age   Always       -       0
    196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
    223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0
    254 Free_Fall_Sensor        0x0032   096   096   000    Old_age   Always       -       1221
    Also I've noticed that the disk read operation takes more than (I believe) it should. For example, when I turn the laptop on and it was in the hibernation mode, it restores quite quickly and shows the login screen, but it's actually impossible to enter anything there, it just doesn't respond to keyboard or mouse input. By the time the login screen times out I am still unable to enter anything, and it goes back to sleep, and the story repeats.
    More to it, most of the apps take ages to start. Preview starts in 5-10 seconds.
    I thought it shouldn't be a software problem, since I formatted the drive and installed a fresh copy of OS X just two weeks ago.
    So I went to the reseller I bought it from (Compustore here in Germany) and asked to check the laptop. They did, and told me everything was fine with it.
    Is it indeed the normal behavior of Macbooks? I don't have anything to compare to, it's my first Mac, but I'm really far from being satisfied with it. Any suggestions on how to fix this?
    Thank you in advance for any suggestions,
    Elijah.

    Is it indeed the normal behavior of Macbooks?
    No, of course not. It is very abnormal and the reseller's conclusion that everything is fine is obviously incorrect.
    I have no explanation for the fact that Apple Diagnostics nor Disk Utility indicates a fault, but if the problem remained unchanged after taking the extreme measure of completely erasing the hard disk and installing OS X as you explained, then the only remaining cause is a hardware fault that has eluded all attempts to detect it.
    I formatted the drive and installed a fresh copy of OS X just two weeks ago.
    Confim the problems remained immediately after those actions and prior to installing any other software. The most common explanation for the behaviour you describe is the presence of any number of ill-conceived "anti-virus" or "cleanup" utilities.
    If you described the problem and your attempts to rectify it accurately, then the reseller did not perform adequate diagnostic testing, or they are being deliberately deceitful, or they are simply incompetent.

  • Very Low Performance And Stability gaps

    Hello, first of all, sorry me because of my low level english.
    I have recent bought new pieces for my sistem, my older CPU was a Duron 1300 (overclocked 1400) in a Gigabyte Ga-7zxr mobo with 512 SDRAM 133 mem.
    I choosed a MSI mobo, the KT6 delta (sr), a 2600 XP+ and 512 DDR 333, with no knowed fabricant.
    I get a lower performance in my new system than the older, isn't normal.
    I have so much questions, please reply me so much you can, i'm getting crazy
    I've read in other posts some specifications about Amp' consume in the mobo.
    Where can i see it? Say me and i'll post it.
    My 2600 xp+ is the model 8 (not the actual 10), it have 256 Kb cache instead 512 and run over 200 mhz over the model 10.  167 x 12.5.
    (wrong forum?, could be, dont reply me to it if you think i should no make this question)
    Well, go with mobo problems.
    My monitor refresh (like if I change the resolution) so often, I don't know why.
    In the dxdiag, in the 3D test, i get a cube no well showing, i only see a bad image, like if the cube is turning hyper velocity.
    In all sandra test i have a performance according with my system, but when i get to ride games, i get low performance than in my older system
    My mem isn't kingston and isn't of any knowed mark. I only could to get kingstom memory instead, i would do it? is really so recomended?
    Well, my best crazy head is about configuring the bios.  I don't know what to put in this values:
    System Bios Cacheable: Enabled.
    C000, 32k Shadow: Enabled.
    SDRAM frequency Auto
    SDRAM CAS# latency
    Row precharge Time
    Ras Pulse Width
    Ras To CAS delay
    Write recovery cycle
    Sdram Burst Length: 4qw
    SDRAM 1T Command: Enabled
    Fast Command Turbo
    FAST R"R turnaround Enabled
    about AGP:
    AGP Master 1 WS Write
    AGP Master 1 WS Read
    AGP READ Synchronization
    PCI LAtency  Timer 32
    Frecuency..
    Spread Spectrum = 0.5%
    CPU FSB 166
    CPU RATIO Auto
    CPU CORE Auto
    Vlink Voltage Auto
    DDr Voltage Auto
    AGP Voltage Auto
    Too much question, really, i know.
    I'm thinking to install a CPU Cooler in the mobo chipset and in the RADEON chipset also, must i do it?
    All my CPU details are below.
    Thanks for all.!!!!

    The model 8 Of AMD AThlon XP is a 333 FPU. I've read it in AMD and other pages.
    i've reduced the case temp by putting another coller in this, but it makes really noise. The new Case temp is 48º C. I'm thinking about to buy another case, with some coolers.
    May i have to change the mem to a kingstom mem?
    Much thks.

  • HT3743 Every time I open the app injustice my iPod gives me a message that says: " Warning, this device is not officially supported. You may experience low performance and instability." I have never jail broken my iPod and I don't know what's wrong. Ideas

    Every time I open the app injustice my iPod gives me a message that says: " Warning, this device is not officially supported. You may experience low performance and instability." I have never jail broken my iPod and I don't know what's wrong. Ideas?

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • How to know if system is running in 40W low performance mode ?

    I experienced the same problem than described in this topic: lower performance with charger than with battery!
    (But I had set everything on Maximum Performance both in BIOS and in Windows's Power settings, so I think everything was done on software-side).
    How to know if the system runs with lower performance (is it a 40W max mode? btw how did you know it is called "40W mode" ? I saw this figure nowhere else than in the mentioned-above topic) , except using a soft to do some benchmarking? Is there a place in BIOS (I didn't find!) ?

    Benoit34 wrote:
    Hi,
    I have a mac book pro & a friend has an Imac, how to know if we are both running Leopard under 32 or 64 bit.
    I see that Leopard support 64, but didn't find if it was actually running in 64.
    Regards,
    Benoit
    Welcome to Apple Discussions:
    if your computer is 64-bit, Leopard is running in the 64-bit mode. There are a few caveats about this but basically this is the case.

  • Major power cut and now low ip profile

    HI i am using the home hub 4 and have been getting line speeds of close to 2mb for the last two years and very stable but ever since a 24hr long major power cut i have a speed of 1.3mb why is this ? ive posted the bt wholesale test results and the router stats 
    When contacting the BT Broadband helpdesk, the agent might ask you for details about your BT Home Hub. This page contains all of the information they are likely to request.
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068340+NQ33601726
    3. Firmware version:
    Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated 24/11/13
    4. Board version:
    BT Hub 4A
    5. ADSL uptime:
    0 days, 00:40:00
    6. Bandwidth:
    448 / 1632
    7. Data sent/received:
    6.5 MB / 32.4 MB
    8. Broadband username:
    [email protected]
    9. BT FON:
    No
    10. 2.4 GHz Wireless network/SSID:
    grahamsteviesofia
    11. 2.4 GHz Wireless connections:
    Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
    12. 2.4 GHz Wireless security:
    WPA and WPA2
    13. 2.4 GHz Wireless channel:
    Automatic / 1
    14. 5 GHz Wireless network/SSID:
    grahamsteviesofia
    15. 5 GHz Wireless connections:
    Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
    16. 5 GHz Wireless security:
    WPA2
    17. 5 GHz Wireless channel:
    Automatic / 40
    18. Firewall:
    Disabled
    19. MAC Address:
    18:62:2c:0b:11:02
    20. VPI/VCI:
    0 / 38
    21. Modulation:
    G.992.1 Annex A
    22. Latency type:
    Interleaved
    23. Software variant:
    24. Boot loader:
    FAQ
    1. Best Effort Test: -provides background information.
    Download  Speed
    1.3 Mbps
    0 Mbps
    2 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 1.3 Mbps
     For your connection, the acceptable range of speeds is 0.8 Mbps-2 Mbps.
     IP Profile for your line is - 1.44 Mbps
    2. Upstream Test: -provides background information.
    Upload Speed
    0.37 Mbps
    0 Mbps
    0.45 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 0.37Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 0.45 Mbps
    We were unable to identify any performance problem with your service at this time.
    It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
    If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
    Solved!
    Go to Solution.

    The one thing it does not show is your noise margin. If you go to hub manager then troubleshooting then logs then you are looking for 2 lines when hub last connected to the internet which give your connection speed and noise margin. If you find them can you post
    the drops in connevtion due to the power cuts have probably increased your noise margin resulting in a lower connection speed and therefore lower profile.  Your profile is correct for your current connection speed
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Low performance issue with EPM Add-in SP16 using Office Excel 2010

    We are having low performance issues using the EPM Excel Add-in SP16 with Excel 2010 and Windows 7
    The same reports using Excel 2007 (Windows 7 or XP) run OK
    Anyone with the same issue?
    Thanks

    Solved. It's a known issue. The solution, as provided by SAP Support is:
    Dear Customer,
    This problem may relate to a known issue, which happens on EPM Add-in
    with Excel 2010 when zoom is NOT 100%.
    to verify this, could please please try to set the zoom to 100% for
    your EPM report in question. and observe if refreshing performance is
    recovered?.
    Quite annoying, isn't it?

  • Low performance in OBIEE11g

    How I can improve the performance of my OBIEE 11g, specifically with the Publisher (there´s available the configuration tags for this version?). Also another question is to know the limit of registries to show in the report, this because I had one with too many information that doesn´t show correctly the information.
    Thanks in advanced.
    Greetings.

    Quote from: henry;107442
    Hello,
    Firstly, I'd like to apologize for my bad English.
    I have a laptop MSI GE 70 0ND with i7 nad GTX660m.
    I think, that my laptop have low performance in latest games.
    Example, Company of Heroes 2 - 35 fps low graphic.
    This is normal? I decreed some money and I'm disappointed.
    sounds about right, 660M http://www.notebookcheck.net/NVIDIA-GeForce-GTX-660M.71859.0.html
    Company of Heroes 2 2013
     low 1024x768    31.7  fps
     med. 1366x768   25.9  fps  
     high 1366x768    16.2  fps  
    ultra 1920x1080     7  fps

  • Filesystem and SATA drive performance

    Hi you all,
    I'm in the process of installing ArchLinux for the third time on my system and I'm in need for some suggestions. The previous installations went without problems but I have realized that the system was not really tuned for some video stuff I'm working with i.e that I need support for large files on my system. Did a google and found references on xfs system that should do the trick. All went ok and I could work without problems on dv files 10-13 GB in size but suddenly I've realized the abismal low performance of my harddrive when copying files e.g: 20 min for a folder of 512 MB (indeed with multiple folders and small files)!!!. The hardware I'm using is:
    AMD Athlon 2500
    Gigabyte GA-7VM400AMF (VIA 8237 -sata controller)
    Seagate 160 GB SATA harddrive
    512 MB ram
    -the "hdparm -tT /dev/sda" command gives me:
    /dev/sda:
    Timing cached reads:   1260 MB in  2.00 seconds = 629.77 MB/sec
    Timing buffered disk reads:  152 MB in  3.01 seconds =  50.43 MB/sec
    -the "sdparm /dev/sda" output is:
    /dev/sda: ATA       ST3160827AS       3.42
    Read write error recovery mode page:
      AWRE        1
      ARRE        1
      PER         0
    Caching (SBC) mode page:
      WCE         1
      RCD         0
    Control mode page:
      SWP         0
    -the "sdparm -i --verbose /dev/sda" command output is:
      /dev/sda: ATA       ST3160827AS       3.42
      PQual=0  Device_type=0x0  RMB=0  version=0x05  [SPC-3]
      [AERC=0]  [TrmTsk=0]  NormACA=0  HiSUP=0  Resp_data_format=2
      SCCS=0  ACC=0  TGPS=0  3PC=0  Protect=0  BQue=0
      EncServ=0  MultiP=0  MChngr=0  [ACKREQQ=0]  Addr16=0
      [RelAdr=0]  WBus16=0  Sync=0  Linked=0  [TranDis=0]  CmdQue=0
    Device identification VPD page:
      Addressed logical unit:
        desig_type: vendor specific [0x0],  code_set: ASCII
    00     20 20 20 20 20 20 20 20  20 20 20 20 34 4d 54 30                4MT0
    10     30 47 4b 48                                         0GKH
        desig_type: T10 vendor identification,  code_set: ASCII
          vendor id: ATA
          vendor specific: ST3160827AS                                         4MT00 GKH
    -I have the following partitons:
    Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1        3918    31471303+   c  W95 FAT32 (LBA)
    /dev/sda2            3919        3930       96390   83  Linux
    /dev/sda3            3931        4055     1004062+  83  Linux
    /dev/sda4            4056       19457   123716565   83  Linux
    sda1 partition is with winXP (still using win bootloader)
    sda2 is /boot formatted as ReiserFs
    sda3 is swap
    sda4 is XFS formatted mounted as /
    Now I'm preparing to reformat the whole drive, partitioning in the same manner but using JFS on the "/" partiton ....and this is what I would ask you guys:
    1. Are the hdparm readings "normal" for my system? Please reply with some of yours if you have sata drives.
    2. Please comment the sdparm readings (have no idea what could these be used for..)
    3. The reallife test of copying files tells me that there should be a problem on my system -I mean that my vaio laptop with a PATA drive @4200rpm does better. If this is the case what could it be - hardware? sata_via drive (I would be willing to test a proprietary drive if it exists)? filesystem?
    Thank you.

    Your new drive may just be 'slower' than the old one.  If they are both 7200RPM disks, it is likely that the older/smaller drive has a faster access time and/or transfer rate.  This is not alwayst the case but it is possible. 
    Also, ensure that you have the latest nVidia nForce2 drivers installed.  If you know the new drive should be 'as fast as' or 'faster than' the old drive, then check the settings that JeanGuy suggested, and if they are all set correctly, look into reverting your nVidia IDE driver to an earlier version.

  • Select single to RSEG with very low performance

    Hello experts,
    We have recently upgraded our sap basis from 701 to 740 and we are experiencing a very low performance with the following abap instruction:
    select single * from rseg into lw_rseg where ebeln = lw_output-pedido and
                                                                ebelp = lw_output-item and
                                                                kschl = lw_output-kschl.
    Could it be anything from the upgrade?
    Any suggestions?
    If we change the "*" for only one field of the RSEG table, would the improvement in te performance be significant?
    Thank you.
    Best regards,
    Raquel Oliveira

    Hi, Raquel!
    In SELECT statement you are not using the key fields for RSEG table.
    Replacing "*" by a single field won't do the trick.
    In our system we've got a table index on EBELN and EBELP fields in RSEG and it helps a lot.
    In case you don't want to set additional indexes you can find all incoming invoices for the purchasing document items in EKBE table and then go to RSEG having BELNR, GJAHR and BUZEI fields.
    If you already have table index on RSEG with EBELN & EBELP fields - you can trace SQL statement in ST05 and check whether it uses the index.
    And apart from that - anything can be from upgrade

  • Firefox get low performance after 2 years runing as well

    hello all,
    in advence i am happy to be one of users of mozilla firefox.
    really i find it a stable internet navigator.
    after two years using mozilla firefox recentely it became very very low performance on
    facebook and youtube and some websites that used a lot of JS
    please i dont wanna delete any internet history or bookmarks
    waiting for answers
    regards

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Very Low performance Firewire

    Hi
    First.. sorry for Bad translating.
    i notes very low performance of my FW800/400 (i think after EFI/SMC Firmware Update)
    FW800/400 More slowly the USB2 and FW800 cannot see External Devices that working fine with my macbook pro.

    Hey Noorldin,
    I think I have a similar problem. I have always had some issues with the ports (owned the MacPro since the first month it came out) but several months ago things took a turn for the worse. External harddrives no longer work properly. USB drives won't mount, firewire drives will mount but the transfer rate is roughly 1MB a sec and after ~10 MB I get an error and the transfer stops. Other peripherals work for the most part but not well. My external usb microphone will not stop receiving audio signals when turned off and my canon HV20 drops frames during transfers. My awesome fujitsu scansnap scanner, printer, and usb mouse transmitter all work fine though. I used to be able to play many 1080p videos at the same time, now I can not play one without frames dropping even when booted into a new clean internal HDD. The MacPro will only sleep if I manually set it to sleep. The autosleep feature will have the internal hdds spinning up and down all night.
    I spent 20 min on hold to get an Apple rep and then 47 min on hold to get an Apple Specialist. The specialist was very kind and tried many things with me. In the end, the specialist concluded that my Logic board or CPUs were most likely bad and that I should get them tested and possibly replaced. You may need the same.
    One weird thing I tried just the other night was to unplug all USB and Firewire devices, including my 30 in display and wireless mouse hub, and then I plugged in just one firewire hdd. It worked fine!? So, I will continue testing on my own for a while and let you know what I find out from my tests or from the Apple repairs, as I have only seen one other person with an issue like mine and what I believe might be yours too. I have seen many issues with the front ports not working right though.

Maybe you are looking for

  • Problem with iTunes and/or updater software??

    I just bought a brand new 30gig iPod video. I followed apple's "instructions" and installed iTunes and the iPod software off of the included cd. I then connected my iPod and it charged but itunes never recognized it. Windows can find it (it appears a

  • I need to upgrade my graphics card on my Mac Pro 3,1 2008. What will work in this computer?

    I have a 2008 3,1 Mac Pro computer running Mountain Lion. I do video editing and would like to upgrade to FCPX and Motion and Compressor. When I try to install them, I get a message that says I don't have the right graphics card. What card should I u

  • Dual Executable​s appear

    I have captured the TestStand 3.5 OI LabVIEW files in a LabVIEW 8.20 project file.  I've customized the OI a bit, and I use the Build Specifications area to build an executable.  When I run the executable, my customized OI appears, I can load sequenc

  • Cursor bind variable syntax err

    Any one help me in correcting the syntax, for cursor return. Oracle version 10g I am trying to execute the sproc and print the cursor results using bind variable, I am getting he below error Variable V_REFCUR REFCURSOR Variable V_REFCUR2 REFCURSOR va

  • How to move anchor points

    Hi, I have gone by what tutorials say and simply isn't working. It's really anoying. How do I move anchor points when I am using the pen tool in CS4? Thanks. Rich