JSR 82 for the 2.5.2 wireless toolkit
Can someone please confirm if the implementation for JSR 82 is included in the Sun Java Wireless Toolkit 2.5.2 for CLDC?
I'm new enough to j2me programming and the wtk itself so I may have missed the point of your question but in my understanding...
The sun wtk does contain an implementation of the bluetooth specification but this is only an interface and it does not actually enable communication with a device as stated in the wtk faq <link = http://java.sun.com/products/sjwtoolkit/FAQ.html#general>
"Can I connect the wireless toolkit to an external bluetooth device, such as a mobile phone?
No, the wireless toolkit does not enable communications with wireless devices. "
Similar Messages
-
Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?
Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1 -
The installation cd for the Sound Blaster creative Wireless Mu
hellocan anyone send me the installation cd for the Sound Blaster creative ?Wireless Musicmy e-mail is:
<span class="w2b">[email protected]<span class="w2"> <span class="w2">and you can also send it to http://www.yousendit.com/?and give me the link for download file<span class="w2">please your help<span class="w2">thank you very muchTry this thread.Message Edited by Katman on 03-22-200605:55 PM
-
I was not given a choice or let known that I would receive wireless keyboard and mouse that requires charging. If I had known earlier I would have asked for non-wireless devices or bought the charger on spot.
The charger should've been a given and not be considered as a separate accessory that requires to be bought. This is the same as having bought an iPhone but not given the charger.
I am very disappointed with Apple regarding this matter. I hope it'll be resolved soon.Oh, okay now I see where you're coming from. Sorry, I didn't know that they provided us with non-rechargeable batteries instead.
Well in that case, they should've provided us with rechargeable batteries instead of the alkaline ones. I mean, the sole purpose of having wireless mouse/keyboard is the purpose of convenience. Having to replace the batteries (that don't last very long from my experience) does not seem convenient to me.
What's more, by providing users with non-rechargeable batteries is not an environmentally friendly choice as this results in an increase in disposal of hazardous waste. I'm bringing this environmental issue up because they have an environmental policy in their company, and on their website they talk about their environmental resposibilities which is quite contradicting as shown in their actions, don't you think? -
Are the JSRs working for the 'public'?
Part of the JCP/JSR review process is a 'public' draft, where anyone can comment on it. Comments on this are then supposed to lead to possible changes in the reference implementation followed up by a final draft and a final acceptance.
1.5 (tiger) is supposed to be released this summer. And JSR 201 which includes autoboxing and a lot of other stuff ( http://jcp.org/en/jsr/detail?id=201 ) is in that. There is a beta (or alpha) program right now for 1.5. Yet 201 is not in the review stage yet. That isn't too unexpected given that they have to work the kinks out. I suspect it just isn't done yet.
However, it does make me wonder what point the 'public review' serves. I doubt that by the time it is released that any comment, other than perhaps documentation changes, will be incorporated. It simply will be too late.
I have reason to believe that at least one other JSR will end up being handled in the same way.
Does anyone else have reason to believe that comments received during a public review of any JSR in 1.5 would result in either a major or even minor change?To be honest, I am not sure. I considered joining the
JAI experts group (A long while back). It did not
appear to be free. At the very least it requires you
have funding available to attend meetings and work on
the proposals (which tends to limit contributors to
those working for supportive companies). That may
have just been JAI though.In the past it cost - I looked into joining as well.
What I looked at a couple of days ago says there is no cost to join.
I don't know if they have on-site meetings. I figured most of it was electronic.
>
JSR's are evaluated by SUN as to whether they will
provide market share/utility/cost/detrement/whatever
for SUN. If
it does not satisfy thier criteria it does not happen.
(Many JSR's are additional/optional packages so they
don't
generally have these problems). Represenatives and
proposals from larger companies (who
are heavily invested in java) do tend to get more
attention (which is not surprising) especially when it
comes
to changes to critical parts of java.
Interesting point.
The JSR process does not include that (or at least it specifically seems to not be that way) but that doesn't mean that Sun has to implement any JSR. However, as far as I know they have implemented everyone that impacted the JVM/API directly.
>
All in all I've found that if you have a good point
then it will be considered. However, it is often the
case
that it is a good point which has already been made.
I don't know why 1.5 additions have not been opened
for public comment. (Are you sure they haven't
already?)
I am sure that the one I listed has not. -
On my 5th replacement phone for the same exact problem each time
I would just like to first of all say that I am the least bit satisfied with Verizon Wireless. I know that this is not the scenario for every customer, but you guys have literally made having a cell phone really really difficult and really really depressing due to being phoneless constantly, awaiting for the next replacement.
I've had 4 replacement Incredible 2's, and I am currently awaiting my 5th replacement.
Each time I get one of these phones, the charge port stops working after a months use. The first couple of times I assumed it was my own fault that the charge port stopped working, now I am considering differently. For the past 2 replacements, I have gotten rid of my car charger and only charged my phone on my nightstand at night to ensure that I was not wiggling the charge port around. DESPITE this, the charger port STILL stopped working, and I am now phone less for the 5th time. And I've had 3 of these replacements in 3-4 months.
There have been 5 different occasions where I have had to inconveniently rearrange my plans for the next few days according to the fact of me not having a phone because the phones you send me don't last more than a months time.
This time, I am having to put back a vacation that I was expecting to leave for tomorrow morning. My phone stopped charging last night, and I am now phoneless for the weekend until Verizon Wireless can ship me another phone Monday.
I should not have to deal with this kind of inconvenience if I am going to choose you as my wireless provider.
Especially not 5 different times for all the same reason when you as a company could of fixed this problem long ago by sending me a better phone. Verizon Wireless should honor their loyal paying customers. The only thing Verizon Wireless is doing for me right now is making my life difficult.
I want some sort of compensation or a resolve to this situation. I am beyond dissatisfied.roadpup27, having multiple replacement devices is no fun! I'm sorry you have to endure this experience with your phone. I would like to help with your issue and ensure you that we do not anticipate our certified like new phones having issues. They go through a 100-point check and in most cases work just as well or better than a new phone because they have updated software. I hope your replacement phone works for you so that you do not miss any events or be delayed. Although we can not compensate you for your phone issues, we will continue to replace your phone until you have a working device if the phone is under warranty. Please keep us posted.
KinquanaH_VZW -
I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?
Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again. -
My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html -
Using the Mac as a wireless Bridge for the Xbox 360
Want to use your Mac essentially as a wireless adapter for an Xbox 360 or any console? plug in the ethernet cable between the two devices and follow the setup process!
Wireless Bridge setup process
1. Open system Preferences.
2. Clisk sharing, then the internet tab and select Airport as the “share your connection from” then select the Built-in Ethernet in the list.
3. Open up the terminal Application and type ifconfig en0 in the window it sohuld display an outcome like this
ifconfig en0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:16:cb:cc:80:aa
media: autoselect status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
4. This gives you the information of what your computer’s IP address is. On the xbox dashboard in the network setup screen select manual and select the top section which contains the IP address, subnet mask, and Gateway address, for the IP address, input the Highlighted section above plus one, so its 192.168.2.1 (this is for standard configurations, again, just add one to the last digit of your IP address.
5. Open Airport Admin Utility, the select configure on your airport. Then select the Internet tab This will give you your subnet Mask, input accordingly.
6. For the Gateway address, you are going to put in the value in the blue box. This is because you are using your Computer as a gateway, therefor you need to tap into its connection.
So For the Average setup you will use:
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Gateway Address: 192.168.2.1
7. Now for the DNS server, this varies according to What internet service you have, but, Airport admin utility provides the answer, right below the information we used above, you will see DNS Server. viola! Put that in as your primary DNS server in the second box of edit options in the network menu.
Now you should be complete, test the connection and you should be Ready to Go!! Happy Gaming!Welcome to the discussions, DanSwiggsD!
If you have a non-Apple device as your main router, unfortunately the AirPort Extreme has almost no chance of compatibility with your main router.
If you do have an Apple router as your main device, please post back with your model number and we'll let you know how your devices should be configured.
If you don't have an Apple device as your main router you have a few options to connect the xbox:
1) A pair of ethernet powerline adapters could be used if you did not want to run a regular ethernet cable from your main router to the xbox.
2) The new AirPort Express 802.11n model does have a feature called Proxy STA which should allow it to receive a wireless signal from any wireless router and allow the ethernet port to be enabled.
Message was edited by: Bob Timmons -
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO. -
How to remove the pop-up window ''Wireless Radio Status" for t430s
Hi, I have owned my t430s for now about 2 years without any major complaints recently I've had to use the fn + f5 function quite frequently, because of my poor internet connection. so that way i can reset which signal I want to choose because the default signal I am connected to is not mine. My problem is similar to what is posted here: https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/how-to-remove-the-pop-up-window-Wireless-Radio-Status/td-p/1191059 I really want to get rid of the pop up for this feature, I've tried to follow what the other thread user's have done and try out their solutions but it does not work for my t430s i tried changing the pmev thing to what was posted in the thread. Can anyone help me? Thanks!
I already tried that as mentioned in my original post, it doesn't work. I still get the pop up message: this is me pressing fn + f5
-
I have succesfully connected a MacBook Air, an iPad and two iPhones to the wireless network in this hotel. Apple TV can see the network and "connects" to the network, but w/o asking for password. I expected to see a screen immediately after selecting the network that asked me for the password as did all of my other devices. ATV did not ask me for a password. When I go to Settings>General>Network, it shows the name of the hotel wireless network, but I can't communicate with the network. It can't set date and time. When I try to enter my Apple account name and password, it tells me it can't log in w/o setting date and time.
Any ideas on how to connect to this network?I am having the same problem. In my hotel when I connect my laptop a screen will pop up and you have to hit the button "I Accept Terms". However I can't do that with the ATV. I called the internet provider and they said they could not help me. Any ideas? Do you think the guy just doesn't know what he can do for me? I am thinking I will call later and hope to get a different technician who might know how to help connect me.
-
Is there a fix for the MBP wireless dropping issue?
I began to experience the Macbook Pro dropping wireless connectivity on my very 1st Apple in 2008. At the end of the day my machine was replaced with a new Macbook Pro mid 2010. It appeared to be working just fine until about 2-3 months ago when I started dropping my wireless printer connection. I searched the internet hoping for a driver update from HP or something from Apple and each time I found something, the problem still existed. I even thought that by upgrading to Lion would resolve any issues that I have with my MBP wireless connectivity issue. After upgrading to buying a new router, new printer and upgrading to Lion; the wireless dropping issue still remains unresolved! I know there are several hundred in not thousands of people who are having the same problem so what are we supposed to do?
When my 1st MBP was replaced in 2010 I had to stop working because I was diagnosed with "Failed Back Surgical Syndrome" and was in the process of applying for disability. Something in the back of my mind said that I needed to purchase Apple Care for this new replacement however I had used all of my savings & retirement to sustain life for me and my family that there was nothing for Apple Care. If it weren't for my church and family I am not sure what I would do during the 18 months of no income while waiting for a decision only to receive an appeal until I findly stood in front of an Administrative Law Judge who heard my case and granted me disability. Besides there was no way I could ask anyone for money to purchase a warranty for a top of the line laptop while the country was falling off an economical cliff.
I broke down and called Apple Support and was told that I qualified for technical assistance regarding the upgrade to Lion a few weeks ago. The tech on the phone had me run some disk utility tests and had me repair permissions which she said could be the cause of the problem. I willingly went along with her in hopes that this was indeed the fix. However, within 10 minutes of hanging up the phone my MBP began to drop it's wireless connection to my new HP printer and also the Internet. Hence my question above is what I am really looking to have answered! What is the fix to this problem that so many people are having issues with? I couldn't afford to purchase Apple Care back in 2010 and I can't afford to purchase a new 2011 machine today if that truly is the fix!
I will be disabled for the remainder of my life and I have grown dependent upon my computer to stay in touch with friends and colleges from work. I worked for the IT Group at Wynn Resorts and I can say that the type of service Appple is providing it's customers is not what I learned over the past 25 years with Mr. Wynn. Why can't Apple get the simple concept that it's customers are it's life line and keeps them in business. I need help and I don't know what to do nor where to turn. It would be different if Apple acknowledged the issue and said they were working on it however they aren't. I plead to Apple to help me fix my notebook so I can stay connected to the outside world vs. couped up inside my home.
Best Regards,
Scott LeavittI am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks -
Where are the Vista drivers for the WoW Wireless headset?
I just got the World of Warcraft wireless headset - but the link in the quick start (http://www.soundblaster.com/WorldofW...irelessHeadset) does not direct me to a VALID Windows driver web site.
It has two links - one for Windows (which explicitly states that it supports Vista), one for Mac. Both take me to the Mac driver package.
When I use the "Software AutoUpdate" to find the right drivers, it tells me that "Windows Vista is currently not supported"
How do I get the Vista (64bit) drivers for this thing?
I want to use it, but if I can't get drivers - I'll have to return it.
(to make things more annoying, the support page http://support.creative.com/contactus/ is 404)http://ccftp.creative.com/manualdn/D..._1_01_0001.exe
Try that direct link. -
Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?
Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.
Maybe you are looking for
-
How to create a properties file for DB connection (BPEL async processes)
Hi, In BPEL asynchronouns Project, I am trying to create the Database connection. Instead of hardcoding the details, I want to put it in the properties file and then import the connection file in order to create a connection. I am very new to BPEL an
-
Help Itunes hangs when opening
I have 250GB of music located on a HP Mediaserver located on my network. My main computer is connected via a N network. Everytime I open Itunes it hangs for a very long time. When it unfreezes, it will play music, but take a very long time when searc
-
Adobe 7.0 Standard Adobe PDF Writer
I just re-installed 7.0 Standard on my XP operating system computer. After I activated it, I went to Printers and Faxes and it does not show Adobe PDFWriter as a choice. How do I fix this?
-
I forgot my parental controls pass code on my kids iphone 5
I forgot my parental control pass word on my kids iPhone 5s
-
How can I put my SystemConfiguration Folder back where it belongs?
After an unsuccesful, paid support session with Apple, via phone, I was left with the SystemConfiguration folder on my desktop. I would like to put it back where it came from, but have no idea how to get it there.