JTable CellEditor does not reflect UI changes

When I change the application font size vi a UIManager property change and call updateComponentTreeUI the font changes for everything but my JTable CellEditors. Anybody have a suggested solution.
thanks

The font change property is set with a customizer and propagated to the entire app via updateComponentTreeUI. If I don't call updateComponentTreeUI I will not see the font change. Calling updateComponentTreeUI is the standard way to propagate property changes. It just doesn't seem to work for TableCellEditors. I need to do something in addition to updateComponentTreeUI so the TableCellEditors will reflect the font customization.
Steve

Similar Messages

Designer does not reflect Inspector changes though source does

Folks,
Don't expect I'm the first to report this but I didn't find anything about it from a forum search so better to report it then ignore it.
Making changes in Inspector for an assign, that is, deleting 2 of 7 copy statements that were initially created through the Designers/Process Map/Assign icon "add copy" function. After creating the 7 copy statements, decided to remove two, used Inspector and deleted the two. Glanced at Designer graphic of the Assign and the two statements were still reflected there. Double-checked Inspector and they were gone, as expected; checked source and the statements were also gone from source, as expected. Went to Overview, hit refresh, waited for rebuild to finish. Went back to Process map, opened Assign statement and there were still 7 copy statements rather than the expected 5, Inspector had 5 as expected, checked source, source had 5 as expected. So, overall the project has the required 5 but Designer is still showing 7. Designer is 0.9.13, Eclipse is at Version: 3.1.0
Build id: I20050627-1435
Thought you might want to know.

Thanks for the bug report. I will forward to the dev team. -Edwin

Photos not saved after sharpening and denoising-shows on screen correctly but when am trying to email it, does not reflect the changes?

I have tried to change pic's like sharpen and de-noise features, on screen ot shows all perfect, but when I try to email them, all the changes are lost, anyone can help with the same?
Thanks in advance.

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

WEBDAV rules repository not reflecting the changes

WEBDAV rules repository does not reflect the changes unless i restart the application server. i dont have a problem with file repository because i can change the file repository using the link from the BPEL console and the changes are reflected immediately from the very next instance. .
But in case of WEBDAV repository, even if i change the rules , they dont get reflected in any of the further instances unless i restart the server.
Please help on this one.

Another observation is that the entire bpel process(with decisionservice on webdav repository) works even if the webdav server is shut down.
The webdav server needs to be up only for the first instance of the bpel process. After that, even shutting down the webdav server does not effect any further instances and they all run smoothly.
This shows that the decison service builds up some kind of cache on the first call of the decisionservice. Some way to destroy this cache everytime the webdav repository changes will solve the problem.
Any help on this topic is highly appreciated.

My JSP file does not reflec the change of a Bean

My test environment: Win 2000, JDK 1.3.1, OC4J(standalone)
My problem:
In servlet, the change of a Strng value is reflected at the next refresh of a browser.
But, when a jsp file call a bean's getXXX(return a String value) method, and if the String value of that bean is changed, the next refresh or visit to that jsp file does not reflect the change of that bean.
For example:
1) TestClass.java
public class TestClass {
private String txt;
public class TestClass {
txt = "Test"; ----- (g
public String getTxt() {
return txt;
2) test.jsp
<html><body>
<h2>
<% TestClass test = new TestClass(); --(h
out.print(test.getTxt()); %> --(i
</h2>
</body></html>
In my first vistit to "http://localhost:8888/test.jsp" the brower shows "Test" String, but after I change the txt value to "Test1"((g) the brower does not reflect the change.
I found that if I use <jsp:useBean id="test" class="TestClass" /> instead of (h-(i line, the brower reflects the change of the bean.
Why does this occur?
Thaks in advance.
PS) In some cases(Not above example), I get the java.lang.ClassCastException.
So Each time I change a Servlet or a Bean, I restart OC4J.
null

SangKyu,
<jsp:useBean > has a property called scope, which defaults to "page".
So the bean gets reset everytime you reload the page.
Can I suggest that you set it to "session"?
The following syntax card I have found userful:
http://java.sun.com/products/jsp/syntax.pdf
Cheers,
Scott
Atlassian - Supporting YOUR 'Orion/OC4J' World
http://www.atlassian.com - [EMAIL][email protected][EMAIL]

AR Down Payment Invoice Does Not Reflect in BP Master Data...

We have placed a sales order for a BP.
We select payment means and accept the payment
In the background a AP Down Payment Invoice is created
When we view the BP master data - the account ballance window does NOT reflect this "down payment"
If we select the golden arrow at account ballance, uncheck "reconciled transactions" you can see the payment and AP down payment and they clear each other out.
The problem is that when the final invoice is created it is not obvious that a down payment has been received. Even if you are simply working at the BP master data window, it is not obvious that a down payment has been received. I belive our process is correct because If you click the TDP box, the payment is listed and will be applied to the final invoice.
It simply does not alert the user that a payment had been received.
What are we doing wrong?????\
Thank you!
Edited by: Andrew Bleier on Feb 4, 2009 1:27 AM

Keith Taylor
You are right this feature is only available in Version 2007A. There account posting happen purely due to the pay SAP has been designed and the configuration of GL Accounts.
To make fundametal change to the core product is very difficult if you explain me your business process exactly as you do, I could think of alternatives.
Please let know.
Suda

IPhoto does not see any changes after editing a photo in Camera Raw

Hello everyone ,
I have some small problem with my iPhoto. I have set up Camer Raw in iPhoto as External Editor, so when I click on edit in IPhoto,
automatically opens my JPG in Camera Raw. After editing in Camera Raw I'm clicking on ,,Save image" then destination is ,,Save in same location" When I go back to iPhoto to the same photo, iPhoto does not show any changes I have made in Camera Raw.
What could it be or should I set something in iPhoto or in Camera Raw?
Is there a chance in order to deal with this?
I will be grateful for any assistance and
I'm waiting for advice
Dawid

Any time a RAW file is edited in any 3rd party editor from within iPhoto it MUST be saved to the Desktop and imported as a new file. There's no other way to do it. So the photos you've edited and saved are somewhere in the iPhoto Library folder system but cannot be recognized and used by iPhoto.
The following is geared for Photoshop and Photoshop Elements but might have some info relevant for you:
Using Photoshop CS3 or Photoshop Elements 9 as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
s I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
OT

Output error:the name of the package "greet" does not reflect the location of this file...

output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
any suggestions why this happens?

The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class. According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
one-of-your-classpaths\com\example\quickstart\
So if one of your classpaths is: C:\Documents and Settings\Igal\My Documents\meiran\greet\
and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

Business area does not reflecting in IT 0001

Dear Expert,
I have assign cost center to organization unit, then hire employee through PA40, so position assign into IT0001,
system pick up the cost center but does not reflecting the business area in infotype 0001.
i checked with FI consultant, there is proper intergation between cost center and business area.
Please tell me, how to resolved this issue.
Many Many Thanks
Urvashi

Hi Urvashi,
You will get the Default values for Company code, Personal area, Personal Sub Area and Business Area because of Account assignment infotype - IT1008 - for your position or Org Unit
check from PO10 or PO13 and infotype 1008.
You will have PA value defaulted on IT 0000 screen and others defaulted on IT 0001 screen.
You can change these values on respective screens. A warning will be issued but you can overwrite them.
Regards,
HARANATH

Compiled CHM File Does Not Reflect New Project Name

I have read many of the experts' responses to posts and found them extremely helpful. However, I have not seen one that addresses my issue.
I have RH HTML Version RH8. I renamed a project via 1) File - Rename Project and 2) Single Source Layouts - Primary Layout - Properties - Output Folder and File Name.
Two problems are: 1) The Project Folder name still reflects the old project name and 2) The CHM file still reflects the old project name.
As a result, the output Help that the user sees still has the old project name in the title bar.
All generated files as well as the RoboHelpHTML Project File were changed to the new project name, just as the RENAME PROJECTS Help says it should. However, the CHM file does not reflect the new project name as it says it should.
1) Can I change the Folder name that was created when I compiled the Help file to the correct name?
2) Can I change the FILENAME in the SELECT OUTPUT FOLDER AND FILENAME window?
3) Can I / should I rename the TOC and Index filenames from the old project name to the new project name? (Help says that changing the project name does not change these file names and it didn't.)
Will any of these actions correct the problem? I appreciate any help you can give.

Welcome to our community
Try File > Project Settings.
And if that doesn't get it, try the Project Set-up pod, windows and change the Window Caption.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

View Object Editor in JHS 10.1.2 does not save any changes....

Hi,
When I did exactly as the JHeadstart Tutorial says, I noticed that
in JHeadstart 10.1.2 with JDeveloper 10.1.2
JHeadstart does not save any changes I make in the View Object Editor
of the Application Structure File Editor !!!
For instance when I change the Width property of an Attribute from 60 to 5
it changes to 5, but when close the View Object Editor
and reopen it again, the Width is back to 60...
Even when I click the button "Validate the Application Structure File" before
closing the VO Editor....
What do I do ??? Is the only solution to edit the XML file
or something like that without using the VO Editor ?
Or is there a better solution ?
Does it maybe work in an older version of JHeadstart ?
If so, where is the older version available for download ?
Thanks,
Eric Joosse

Eric,
How did you leave the JHeadstart VO editor?
The changes should be saved when you click the OK button in the VO editor itself, but they are not saved if you click Cancel, or the little cross in the upper right corner, or leave it open while going back to the Application Structure File editor. That's because it's a standalone editor (you can also find it when right-mouse-clicking the VO in the Model project). The icon in the Application Structure File editor is just a quick way to get to it.
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting

Customer PC3000 does not exist (please change entry in plant 3000)-INT STO

Hi All,
Iam getting error message while creating intercompany sto PO in my QA clinet.
(Customer PC3000 does not exist (please change entry in plant 3000)
Vendor maintained both the plant(supply and receeving plant)
Customer maintained both the company code and sales org.(supply and receeving plant) then also Iam getting same error.
I had checked OMGN t-code setting looks good.
Same setting I had tested on DEV and SANDBOX its wokring fine.
Please help me out how to solve this problem
Thanks
Raj K

Hi,
I am facing similar problem, When trying to create a PO for Intercompany stock transfer, I am getting the error message Customer XXX does not exist (Please change the entry in Plant XXXX).
This error is appearing only in the Production system, but PO is getting created in Quality system. All the Master data, Configuration in both systems appears same. If you know any solution, kindly post.
Regards,
Onkar

TS2167 I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

Where are you publishing to? Can you publish successfully to a folder on your hard drive? Have you read this webpage: Publish iWeb site using FTP. It may have a clue to where the problem is.
A quick troubleshooting fix is
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
However, when you delete the preference file you probably will have to use the app described below to select and open your domain file with iWeb:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Vendor listed in the batch does not reflect actual supplier.

Hi,
Vendor listed in the batch does not reflect actual supplier.
For some (STO's) it reflects the actual supplier & for some it is replaced by receving vendor.
Regards,
Sudakar

Great, that worked, thanks.
Now I have a small problem. I'm dispatching a MOVE event
manually at one point to force a listener to trigger, and it seems
that afterBounds is null. Here's how I'm dispatching the event:
nativeWindow.dispatchEvent(new
NativeWindowBoundsEvent('move'));
While the MOVE listener function is successfully called,
event.afterBounds.x throws a null reference exception.
Is there an easy workaround?

JTable CellEditor does not reflect UI changes

Similar Messages

Maybe you are looking for