Vendor listed in the batch does not reflect actual supplier.

Hi,
Vendor listed in the batch does not reflect actual supplier.
For some (STO's) it reflects the actual supplier & for some it is replaced by receving vendor.
Regards,
Sudakar

Great, that worked, thanks.
Now I have a small problem. I'm dispatching a MOVE event
manually at one point to force a listener to trigger, and it seems
that afterBounds is null. Here's how I'm dispatching the event:
nativeWindow.dispatchEvent(new
NativeWindowBoundsEvent('move'));
While the MOVE listener function is successfully called,
event.afterBounds.x throws a null reference exception.
Is there an easy workaround?

Similar Messages

  • "spam" caller list so the phone does not even ring?

    Is there a way to add a nuisance call to a "spam" caller list so the phone does not even ring?

    File a complaint at donotcall.gov. You're never going to be able to catch them all. Most of them now use voip systems that can spoof numbers. They almost never call from the same number twice and within 24 hours of beginning to use it, the number is dead. Completely shut down.
    What the industry really needs is a vetted real-time black-list of smap callers that you could subscribe to, similar to those used to filter spam e-mailers. Probably won't happen in this decade, though.

  • VL01N - Message VL200 -The batch does not exist in plant

    Hi all,
    I try to create a delivery for a sales order via VA03 by displaying the order, select Sales document and then Delivery from the menu bar. On the Dilvery overview screen, when I enter an invalid Batch number for the item, I receive a warming messge VL 200 (The batch does not exist in plant &) and I can save the delivery. My problem is I want to put a hard stop instead of a warning message so the delivery cannot be saved. Is there any solution for this or it is impossible to put a hard stop. I was thinking of config ... but I am not familiar with this. Please help!
    Thank you very much in advance,
    Chuong

    Hi Seshu,
    In include FV50PF0L, there is a logic to either display a Warning or Abend message, so i guess something can be set to do this. Please help, thansk!
          if v50agl-sammelgang = space and "46A BEY
          ( ( sy-dynnr ne gc_dyn_batchsplit and
              t185v-panel ne gc_panel_chsp ) or
            tvlk-vbtyp ca vbtyp_lire ) .
            perform message_handling in program (programmname)
                                               using cvbap-posnr
                                                     '200'
                                                     'W'
                                                     'VL'
                                                     lc_werks
                                                     space
                                                     space
                                                     space.
          elseif ( sy-dynnr eq gc_dyn_batchsplit or          "46A BEY
                   t185v-panel eq gc_panel_chsp ).
           if sy-binpt = charx.                                  "v_n_481983
               message id 'VL' type 'A' number '200' with lc_werks.
           else.                                                 "^_n_481983
            perform message_handling in program (programmname)
                                                  using cvbap-posnr
                                                        '200'
                                                        'E'
                                                        'VL'
                                                        lc_werks
                                                        space
                                                        space
                                                        space.
           endif.                                                  "n_481983

  • IPone 6, iOs 8.1.2 when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

    when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

    Addendum
    Last night charging for around 3-4 hours only charged a dead phone by 55% then left it to charge overnight
    Today the battery dropped from 6:15 am full charge to 53% at 10:38 am at time of writing this with
    1 phone call out for 30 secs
    1 incoming missed call,
    Whatsapp fetched around 10 msgs
    Email fetched around 20 ermail from 4 accounts but not viewed yet on phone

  • Why I can't I do a songs sort which are marked by !'s (apostrophes) on the left side of list indicating the song does not exist in my music border, instead of scrolling through 1000's of song manually?? Seems stupid, no?

    Why I can't I do a songs sort which are marked by !'s (apostrophes) on the left side indicating the song does not exist in my music border, instead of scrolling through 1000's of song manually?? Seems stupid, no? And these !'s appear only when you try to play that song and it says "unable to locate".

    Use Shift+Delete to remove items from a playlist and the library at the same time.
    tt2

  • Batch does not exists for the material

    Dear Gurus
    In the inspection set up in qm view of material master  I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system  is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
    What are the settings that I need to do so that this discrepency does not arise.
    Regards
    Sandip Sarkar

    sandip:
    1) DO you assign a batch number to the product during order creation ??
    2) Why do you have to enter with QA32 to save the inspection lot? This is saved once you release the order.

  • 802.1x accounting does not reflect correct port status

    Hi,
    I've just discovered an issue when trying to use MSFT supplicant and Cisco 802.1x accounting. This makes 802.1x accounting completely unusable.
    Facts:
    1. MSFT supplicant does not send EAPOL-Logoff messages and there's no way to enable this (btw. Aegis client does not send it either, except when disabling interface).
    2. I am doing machine authentication along with domain authentication.
    3. Windows XP SP2 is used with EAP registry hacks applied.
    4. PEAP/MS-CHAPv2 method is used.
    Now when the computer is started it is logged into 802.1x with 'host/machine' account and RADIUS accounting start is sent by the switch. That's fine.
    When a user logs on with its 'domain\user' identity, then EAPOL-Start is sent from the host triggering new EAP message exchange and the user is authenticated correctly. However the switch sends Interim Accounting still using 'host/machine' credentials which is obviously wrong.
    Even more bizarre accounting happens when the user subsequently logs off from the machine. The EAPOL-Start is sent from the host triggering new authentication process for 'host/machine' identity and the host is authenticated ok. The accounting being sent is:
    - first Accounting Stop for 'host/machine' User-Name
    - then strange Interim Accounting with most attributes empty or missing
    256970: Jul 10 15:56:41.211 MET-DST: RADIUS: authenticator 68 CA 1A 46 85 4F F5 95 - 87 B4 84 61 72 85 42 F3
    256971: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Id [44] 10 "013F0000"
    256972: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 34
    256973: Jul 10 15:56:41.211 MET-DST: RADIUS: Cisco AVpair [1] 28 "connect-progress=Auth Open"
    256974: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Session-Time [46] 6 0
    256975: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Octets [42] 6 0
    256976: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Octets [43] 6 0
    256977: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Input-Packets [47] 6 0
    256978: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Output-Packets [48] 6 0
    256979: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
    256980: Jul 10 15:56:41.211 MET-DST: RADIUS: Acct-Status-Type [40] 6 Watchdog [3]
    256981: Jul 10 15:56:41.211 MET-DST: RADIUS: Vendor, Cisco [26] 24
    256982: Jul 10 15:56:41.211 MET-DST: RADIUS: cisco-nas-port [2] 18 "FastEthernet0/11"
    256983: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port [5] 6 50011
    256984: Jul 10 15:56:41.211 MET-DST: RADIUS: NAS-Port-Type [61] 6 Eth [15]
    256985: Jul 10 15:56:41.211 MET-DST: RADIUS: Class [25] 27
    256986: Jul 10 15:56:41.215 MET-DST: RADIUS: 43 41 43 53 3A 30 2F 32 39 32 66 2F 61 38 31 38 [CACS:0/292f/a818]
    256987: Jul 10 15:56:41.215 MET-DST: RADIUS: 30 32 38 2F 35 30 30 31 31 [028/50011]
    256988: Jul 10 15:56:41.215 MET-DST: RADIUS: Service-Type [6] 6 Framed [2]
    256989: Jul 10 15:56:41.215 MET-DST: RADIUS: NAS-IP-Address [4] 6 10.129.128.40
    256990: Jul 10 15:56:41.215 MET-DST: RADIUS: Acct-Delay-Time [41] 6 0
    256991: Jul 10 15:56:41.239 MET-DST: RADIUS: Received from id 1646/238 10.129.128.38:1813, Accounting-response, len 20
    256992: Jul 10 15:56:41.239 MET-DST: RADIUS: authenticator ED 8E 8B 15 28 5F E4 37 - BF A8 F5 9E 10 43 5E A8
    So that the accounting sent from the switch does not reflect current status of the authenticated user on a given port.
    How to deal with this issue? Any ideas?
    thanks,
    robert

    Does your radius proxy-table is populated wrong for EAP- SIM users ?

  • How to block a payment in F110, when the system does not allow us to block

    Hi all
    Blocking of a payment happens in the following areas :
    1.  In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
    2.  We can also block a vendor through Vendor master area
    3.  We can block a Vendor from paying through Xk05.
    Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor.  But the system does not allow me to block it.  Why the system does not allow the block.  Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
    Can anyone help me out in this...
    thanks and regards
    SL

    Dear,
    Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
    Regards,
    Chintan Joshi

  • When I click on a bookmark to open it, the bookmark (in the sidebar) does not stay highlighted. Why?

    When I open a bookmark, the bookmark title from the list in the sidebar does not stay highlighted. It used to but doesn't anymore. Do you know why? Can I change an option to get that feature back?

    Hello Donald.
    Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your issue, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • Batch does not go over AS2 .general Error B2B 50014

    Hi,
    We are trying to send data over as2 and are using count based batching.when we send the single message that gets transmitted successfully but the batch does not generate a wire message.SO some of the transactions of the batch are in msg_Wait_Batch status while some are in error status.The error message is
    errorCodeB2B-50014
    errorText General Error

    Hi Dheeraj,
    Thank you for the response. The Action name I m using is D:ID:Count:60.
    ID:is coming from backend appplication,set in BPEL Xform
    Count: is number of recordscoming.
    When I use a differnt channel, say send it to a file (generic file) It batches successfully.The error just comes up when I m sending it over AS2.Single record on AS2 goes through successfully.
    Thanks.

  • Batch does not exist for material

    Dear Gurus
    In the inspection set up in qm view of material master  I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system  is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
    What are the settings that I need to do so that this discrepency does not arise.
    Regards
    Sandip Sarkar

    Was the batch number enterred in the process order?  If you have an inspection lot with early lot creation, you should have the batch number assigned in the order.  I suspect the system is having problems because of some conflict between the inspection lot, the process order and whatever internal batch number assignment process you might have.
    FF

  • HT201318 I upgraded my iCloud storage capacity for a higher tier and the device does not actually reflects said upgrade. How can this be resolved since my credit card was charged

    I upgraded my Icloud storage capacity to a higher tier and my Iphone does not reflect the change although my credit card was charged and the device is nor properly backup. How can this be resolved?

    It seems to take up to a couple of days for the upgrade to take hold, at least that's the experience of some users.  Give it 24 hours before contacting apple.
    For customer service issues, go here...
    https://expresslane.apple.com/Issues.action

  • I would select a link from the drop down on the address bar but the page would not open. I would select it again but the page does not open. I could only reach website by selecting google on most visited list.

    After updating AVG anti-virus, I encountered a problem on Firefox. I would select a link from the drop down on the address bar but the page would not open after clicking on it. I would select it again, even double click, but the page does not open. I could only reach website by selecting google or yahoo from my dropdown on the most visited list and then click the website that I want to visit. I would like to do this in one step by just selecting a link from my history on the address bar and select a link instead of going to google and then writing the page I want to visit. What could be the problem? When going to the address bar to select a link to open, why does the site not open? Any help would be appreciated.

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

    My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
    I manually deleted Firefox from the list once I have Windows processing.
    And when I clicked on Firefox, Firefox will open quickly and easily.
    Firefox process in Windows Processes names list called "firefox.exe * 32" is.
    Please try to solve my problem, my problem is how to solve?

    Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
    If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
    You might already have seen these troubleshooting articles. If not, does anything here help:
    * [[Firefox won't start - find solutions]]
    * [[Firefox hangs or is not responding - How to fix]]

  • Output error:the name of the package "greet" does not reflect the location of this file...

    output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
    I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
    any suggestions why this happens?

    The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class.  According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
    one-of-your-classpaths\com\example\quickstart\
    So if one of your classpaths is:  C:\Documents and Settings\Igal\My Documents\meiran\greet\
    and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

Maybe you are looking for