JTextArea is making cells bigger with TableLayout

I've added a JTextArea onto a JPanel which has TableLayout as its layout manager. I've attached a JScrollPane onto the JTextArea.
Im trying to make the scroll pane do its job when the text becomes too much for the cells' allocation for the JTextArea. Right now its just making the cells bigger which forces the whole GUI to scroll downwards (or sideways) as opposed to just the JTextArea scrolling and leaving the cell sizes the same.
Hope im making sense.
Any ideas?

Hi,
sure that the size of the corresponding column and row was set to TableLayout.FILL (you specify this by calling the constructor of TableLayout)? I have got the same effect if I had set the size to TableLayout.PREFERRED ...

Similar Messages

  • On IPhone 5S, when making cell calls, it connects to FaceTime.

    On IPhone 5S, IOS 7.1.2, when making cell calls, it connects to FaceTime.

    Hey there siteshop,
    It sounds like you are still hearing the phone line ringing even after the person you call answers the line. I would try the troubleshooting outlined in this article:
    iPhone: Troubleshooting issues making or receiving calls
    https://support.apple.com/kb/TS3406
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update.
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How do I make the height of my cells bigger? I am trying to put togther a guest list for my wedding.

    I have worked with excel in the past and it seems easier to manuever through. I am wondering if I should purchase it for MAC? I need to get my guest list done ASAP and I can't figure out how to make the cells bigger. Please help! Thank you!

    Tolf,
    I'll add one method to Wayne's list that you may find helpful in some certain situations. Begin by eliminating all the unnecessary rows and columns by grabbing the Add Rows/Columns grip at the lower right hand corner of the table and dragging it up and left until it stops. All the rows and columns with no content will now be gone.
    Now you have a table with just the minimum necessary rows and columns. Select the table object by clicking on once on the table name in the Sheets Pane or by clicking on the grip in the upper left corner of the table.
    You should now be seeing the 8 sizing handles, little open squares. They are at the 4 corners and in the middle of the 4 sides.
    Grab one of these sizing handles and drag it to change all of the cell sizes at once. If you grab one of the corners you can change the height and width simultaneously. If you just grab a side, you'll just change the spacing of the lines parallel to that side.
    If your level of ASAP precludes you from having time to work with Numbers, you can download the free trial of Office for Mac, or you can download one of the free Office clones, like LibreOffice. They would be more familiar to you in the short run.
    Good luck with your wedding planning.
    Jerry

  • How do I locate another cell phone with my iphone?

    how do I locate another cell phone with my iphone?

    you can't unless it's an AirPrint enabled printer or you purchase a 3rd party app like printopia.

  • I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said "ERROR IN PROJECT

    I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said
    "ERRORS IN PROJECT
    There were errors during the project validation that have to be fixed before burning the project."
    What does this mean and how do I fix it.
    jim

    Hi
    Do You have a NEW Mac ?
    Does it really have iDVD ? New ones Don't.
    Please tell much more
    • Mac used
    • Program used (versions)
    • Material used (Codecs, file formats etc)
    Yours Bengt W

  • Making a PDF with LiveCycle then being able to edit pages, insert pages, delete pages, attach files to document, be readable in Adobe Reader etc.

    We have been working for some time with LiveCycle to creat a documents and have experienced a host of problems with the end product.
    1.  Images inserted into the LiveCycle PDF document often come up as "broken links" after editing the document and resaving it.
    2.  Documents will not display in Acrobat reader unless a digital signature is applied to them and the document is re-saved.
    3.  After making the document, we are unable to use Adobe Pro to insert pages, delete pages, or insert files into the document as attachments.
    The end state was to use the simplicity of LiveCycle to create a document and do most of the hard work, and then save it as a PDF document that could be easily edited with Adobe Pro.  It has proven difficult, to say the least, to figure out how to make this work.
    Thanks in advance for any assistance.

    1- Thank you
    2- It only seems rational that if I make a form with LiveCycle that I should be able to view it with Adobe Reader or Adobe Pro.
    Making a form with LiveCycle to be distrubuted to personnel internally that have Adobe Reader and Adobe Pro and cannot open it without it having a digital signature field in it that has just recently been signed just doesn't make sense.  Nor does it seem to make sense to have to purchase 200 additional licenses just for LiveCycle so that people can open a PDF that was made with LiveCycle.  If I make it in LiveCycle and only people with LiveCycle can open it, what is the purpose of making it to begin with?
    3- This also totally sucks.  In a standard Adobe Doc I can at least attach documents to it?
    So, what, exactly then, is the purpose of LiveCycle if the only benefit it seems to provide is ease of creation, but the end product has way less functionality?
    And how do I go about contacting an Adobe rep on the phone in regards to this without getting "there is no support for this product, go to Adobe.com"
    We have millions of dollars of Adobe software and can't get support other than hunting and pecking in these forums?  Really?

  • Making a PDF with "Outline" and Bookmarks Using Pages

    Hi, I'm using Pages 1 and I have tried making a PDF with outline breaks but I failed. I thought using paragraph styles for my document would work but when I exported my document to PDF, all I got was a PDF that only has the thumbnails view but not the outline view. Also, when I exported my document that has bookmarks to PDF, all the bookmarks don't work anymore. How can I make a PDF document using Pages with all the bookmarks and the organization just like other PDFs that I encounter? Thanks

    Hello LadyinStilettos,
    welcome to the Pages Discussions. If I remember correct, in Pages 1.x there is no way to export text links to PDF. An outline view creation doesn't exist.
    If you want to have links in PDF (of the TOC, too), then you should upgrade to iWork'06. But outline view doesn't exist here like it doesn't in version 1.x.

  • My ipod touch 4th generation's audio jack is no longer making a connection with my headphones, i dont think my ipod is under warranty and therefor would i be able to pay apple to fix my ipod.

    My ipod touch 4th generation's audio jack is no longer making a connection with my headphones, i dont think my ipod is under warranty and therefor would i be able to pay apple to fix my ipod.

    If not under warranty,
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace the jack for less less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the jack yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • I am busy making a website with iweb. Do you know if it is possible to make a page with a slideshow which does not contain jpg's but other documents?

    I am busy making a website with iweb. Can I only make a page with a slideshow containing jpg's? I would like to make a (pages) document with pictures and have this as a slideshow. Is that possible?

    If you use Keynote rather than Pages you can export as HTML to get a slideshow...
    http://www.iwebformusicians.com/Banner-Slideshow/HTML-Slideshow.html
    Or you can use a JQuery slider that will display text, images, movies etc...
    http://www.iwebformusicians.com/Banner-Slideshow/Anything-JQuery-Slider.html

  • Making a Directory with alumni information...Templates to use?

    I am making a directory with alumni information for my high school reunion. In one part of the book, I want to list bio information along with a current pix. In the back of the book, I want to alphabetize everyone's name and address and then cross-reference which page their bio is on. Can anyone tell me how to go about doing that? I want the end result to be a booklet (with 81/2 inch by 11 inch paper folded in half). I tried using one of the Pages templates (I believe it is the one for cooking because it was the only one I could find in the brochure section that was not a tri-fold). I am finding that it took so long to put just one page together. I need to be able to do it rather quickly since there are over 100 people already attending and I can't take forever to do this project. I would appreciate any input from anyone on this subject.
    Thanks in advance.

    I would start on a Word Processing blank document, Not a Page layout document. I'd use A4 paper size but I guess you'll have to use the US letter size.
    When I have created the bios of the people I would use a Heading style for their names. By doing this I can make a Table of Contents of there names. Don't forget adding page number.
    The table of Contents (TOC) will be created in the beginning of the brochure. Select the TOC and copy the content. Open TextEdit and Paste. To alphabetise you need to get the free app WordServices from [http://www.devon-technologies.com/products/freeware/services.html]
    do the alphabetising and copy and paste the text in the end of your Pages document. The TOC is the very last thing you should do before making the booklet.
    Save the document. I hope you have done that many times during the process creating it. And also save it as a PDF document.
    To make the booklet get either the app BookLightning 1.7.2 or Create Booklet PDF Service 1.1
    These application will take your document and create a booklet with the right pagination.

  • Indesign book files making a PDF with spreads????

    Hi, I am working with a book file but need to make a digital PDF with spreads. So the problem is obviously that I start with a right single page and finish with a left single page in each chapter which doesn't make a spread. Is there a way around this? (apart from copy and pasting the single pages at each beginning and ending together as spreads into an empty document and replacing these pages in the PDF)
    Thanks

    Re: Indesign book files making a PDF with spreads????
    When you make the pdf of the book from the book panel.
    Create a new document call it filenamespreads or something.
    Get the PDFplacer.jsx script http://indesignsecrets.com/placing-all-the-pages-of-a-pdf-inside-indesign.php
    Run a few pages to get the position right, then do the whole book.
    Export to pdf as spreads.
    It sounds longwinded but it isn't.
    @Eugene--
    This is the closest answer to solving my problem.
    To clarify, the reason I need spreads is NOT for final printing. Its for sending a reader proof to a client to send to someone for review. They need to see it as spreads to get a "feel" for the book. I feel like it should be possible to do this, easily, without too much stress in InDesign.
    I am going to try your solution but I am a newbie about using scripts in InDesign. Never done it before. I placed the script in the scripts folder and re-launched InDesign, but how do I launch the script?
    Thanks!
    Oh, and I should have specified before, I'm using CS2.

  • I upgraded to mavericks and I cannot make text or images bigger with the trackpad. It only zooms in the document. How to change that?

    I upgraded to mavericks and I cannot make text or images bigger with the trackpad. It only zooms in the document. How to change that?

    Hi Rohit,
    If you have questions about the Accessibility features of Mavericks, you may find the following article helpful:
    OS X Mavericks: Use accessibility features
    http://support.apple.com/kb/PH14322
    Regards,
    - Brenden

  • Problem when making new connection with user "sys"

    Hi, I'm having trouble on making new connection with user sys against local 10g installation, the password is correct and I've tried making new connection with other
    users which is fine.
    when I click "test" or "connect", the error msg is strange like this:
    "ORA-01017: invalid username/password; logon denied"
    can anybody help.
    Thx.

    Have you used the "Role" drop-down to "SYSDBA"? - if not, you get the ORA-01017 error.

  • JTable's Cell navigation with TAB

    Dear ALL
    I have face one problem in JTable's cell navigation with TAB. The problem as describe bellow.
    I have two columns NAME and ADDRESS. Set focus on ADDRESS column's first cell. now if i am press tab key then focus controll comes on second cell which is the ADDRESS column. At the end of row controll comes on first row second column that means focus on ADDRESS column's first cell.
    Please give me some hints.
    Thanks in advance.
    Amit

    Your description doesn't make any sense (to me at least) so I don't know what your problem is or what you are asking to be changed.
    The normal tab order is Left to Right, Top to Bottom. So if the focus is at the top/left normal tabbing would be:
    Row 0, Column 0 (name 0)
    Row 0 Column 1 (address 0)
    Row 1, Column0 (name 1)
    Row 1, Column 1 (address 1)
    Row 2, Column 0 (name 2)
    Row 2, Column 1 (address 2)
    Your question seems to imply that your tab from address to addreass, which doesn't make sense.
    "Set focus on ADDRESS column's first cell. now if i am press tab key then focus controll comes on second cell which is the ADDRESS "

  • [svn:fx-trunk] 8507: Making measureHeightOfItemsUptoMaxHeight consistent with the way we create rows in the datagrid .

    Revision: 8507
    Author:   [email protected]
    Date:     2009-07-10 10:13:11 -0700 (Fri, 10 Jul 2009)
    Log Message:
    Making measureHeightOfItemsUptoMaxHeight consistent with the way we create rows in the datagrid. MakeRow ensures reported row height is round to the nearest integer, measureHeightOfItemsUptoMaxHeight is now consistent.  Fixes a long standing PrintDataGrid issue.
    Bugs: SDK-20237.
    QE Notes: None
    Doc Notes: None
    Reviewer: Glenn/Alex
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-20237
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as

    Well, you could do the following:
    1) Create a stored procedure that assembles the data into a rowset with rows and fields like the format you want.
    2) Create stored procedures that handle insert, update, and delete.
    3) Create an entity object definition with all transient attributes. Make the attributes match the elements of one row.
    4) Override doDML() in the entity object class to call your procedures (the doc explains how to do this). You might also need to do a bit of research and figure out if you need to override some other method so you can report rows with transient attribute changes only as needing posting. (getPostState(), maybe?)
    5) Create a view object definition with entity-derived attributes based on your EO attributes.
    6) Override the appropriate methods to call your data assembly procedure rather than execute a query (this is also in the doc).
    Still kind of kludgy, but it keeps your business components pretty clean, especially if you use framework classes to do most of the work for you. (I have a partial example of how to do that here.) Of course, it keeps your business components clean by moving the real work to the DB, but some people find that more maintainable that a kazillion business components.
    Hope this helps,
    Avrom

Maybe you are looking for