JTree - Sometimes tree node is not selected, while clicking it using mouse

Hi,
I'm sure that it is a very rare scenario.But ,sometimes i couldnt select a tree node on mouse click.It happens very rarely and simulating the behaviour is not possible.If anyone have gone thru this,plz repond.
Thanks,
Kathir

did you try debug with a breakPoint on mouseListener->mouseClick event, and see if the selectionModel changes?

Similar Messages

Multi object not exported while clicking Edit Object in "Acrobat X Pro to Photoshop CS5"

Subject: Multi object not exported while clicking Edit Object in “Acrobat X Pro to Photoshop CS5”
I unable to get all selected object (images) which from Acrobat X pro to Photoshop CS5, I getting only one image.
It was working fine when used Acrobat 6 & Photoshop CS.
Also I ensured Preference setting as shown below:
Kindly let me know the solution, it should helpful.

Dear Mylenium,
Thanks for your respond on this. However the same scenario is working perfectly in "Acrobat 6" to "Photoshop CS". Could you please clarify?
Pasumalai

Preview not responding while click printing

Preview not responding while click printing....
Anyone can help? Thx.....

It happened after I upgrade to OS Lion.....

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

Try a reset:
- Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
If issue persists try:
- Another known working cable
- Check the charging port for any damage or debris
- You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

How do we make a newly created tree-node the currently selected one?

Hi,
We are using JHeadstart 10.1.3 - Tree Generation. We are running into several issues with the trees, especially upon creation of new tree nodes. The Form in our Tree-Form page is Saved. At that point, we would like the new node to be the selected node in the tree (and also in the tree bean).
How do you believe can we do this? Right now, after creating the new node, we have no node selected - although it seems that the new node is selected as the normally synchronized form on the right shows that node.
Thanks for any suggestions!
Lucas

Steven,
I had not upgraded to Service Update 1 - was using Build 91. After upgrading, I see some difference, but not entirely the result I was looking for.
In a Tree-Form page on Employees, when I added an employee at the same level it still did not seem to be automatically selected.
Was wondering whether perhaps this has to do with the following comment from the source code:
          // this happens when posting back to the same node level in the tree:
          // the root node binding has no children in that case, causing derivation
          // of focus row key to fail, have to find out why root node children
          // are lost. Work around for now: return the focus row key as set by
          // the user clikcing on the nodeIf not, can you explain what this comment refers to?
thanks for your help.
Lucas

htmlb:tree : Node IDs not unique - error handling

From an internal table of customers and contact persons, I made a tree using TVIEWNODE2 structure. Some of the customers are not having contact persons for which contact person ids are simply '00000000'. Thus these nodes may not be unique here. Somehow everything is working fine but sometimes I am getting the above error mentioned in subject.
Actually I have a tabstrip and one of the items of tabstrip contains tree. The occurrence of this error is not at all uniform , sometimes it works and sometimes don't. It's very difficult to find when and why it's triggered. In the same situation and circumstances sometimes it works and sometimes doesn't.Appearance of this error is irrespective of whether tree is operated or any other event is handled.
Can anybody throw light on this? Thanks in advance.

hi thomas
you are absolutely correct when you say that the error occurs in the second request cycle. do i need to clear the tree table then?
As you said , if the application is stateful, the best place is 'On create' event to write the code. But my application is stateless and that is why I am hesitant to put the code in 'On create' and rather placed it in 'On request' event where I am getting the cookie of internal table from which I am preparing tree table.
So, I think keeping the code in 'On request' as before but ensuring that the table is cleared everytime will solve the problem. But let me check this and tell you.
I am very thankful for your quick replies and focussing on my problem. thanks a lot.
I will let you know the outcome soon.
regards
jawahar

WHEN-TREE-NODE-EXPANDED not fire with keyboard in FORMS 10G

I have a Hierarchical Tree. When i click in any node with mouse, works fine.
When i use the key rigth and left of the keyboard, the tree expanded, but not fire the WHEN-TREE-NODE-EXPANDED.
In FORMS 6i works fine.

It's a bug 4509399. There is a oneoff patch on Metalink:
https://metalink.oracle.com/metalink/plsql/f?p=130:14:4034066994841324251::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,331369.1,1,1,1,helvetica

How to programmatically click a tree node(make it selected)?

in my program, i want to make a tree node "clicked" by codes, so that the valueChanged(TreeSelectionEvent tse e) method of the TreeSelectionListener can be invoked.
thanks a lot!!

    private Robot robot;
    private void triggerMouseClick(TreePath treePath) {
        if (robot == null) {
            try {
                robot = new Robot();
                robot.setAutoDelay(60);
            catch (AWTException e) {
                e.printStackTrace();
        Rectangle rect = this.getPathBounds(treePath);
        Point point = new Point(rect.x+1, rect.y+1);
        SwingUtilities.convertPointToScreen(point, this);
        robot.mouseMove(point.x, point.y);
        robot.mousePress(InputEvent.BUTTON1_MASK);
        robot.mouseRelease(InputEvent.BUTTON1_MASK);
    }

Entity Attributes are not populating while creating EO using EO wizard.

Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
Sagarika

Please ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ

Not able to copy the tree node text in solaris, while easily done in window

Hi,
I m not able to copy the text present on the tree's node to terminal or other text editor in solaris. I m using <Shift><control> C and V comaand for the same but the text is not being copied and pasted on the text pad or the terminal window.
While the same is possible in windows OS using ctrl+c and ctrl+v command.
Please suggest the possible solution for the same, is there any property of the tree/OS needs to be set?

Help About says I'm on 20.0.1
Up until last week, I was able to use the tab key when typing emails and other multi-line text boxes.
Suddenly the behavior of the tab key changed. This isn't the first time. It's been quite a while ago that the function of the tab key changed from indenting to moving around the page, then after some time it changed back to indenting.
Can we get this fixed and leave it alone, please?
I may give one of those add-ins a try, but my problem with add-ins is that they break when FF is patched or upgraded, then I'm left with out the solution they provide.
Can we just fix Firefox, please?
Thanks,
Frank
P.S. Another potential fix I came across suggested starting FF in safe mode to see if the problem goes away. It does not. It seems to be a change to FF that appeared after an update last week. On or just befor 24 Apr.

How to get all tree node parents upon select

I have a tree, and when user clicks an item in the tree, I want to get all the parents of the selectedItem node.
So if I have this XML:
<products>
    <item>
        <sku>1001</sku>
        <quantity value="100" />
    </item>
    <item>
        <sku>2001</sku>
        <quantity value="250" />
    </item>
    <item>
        <sku>3001</sku>
        <quantity value="300" />
    </item>
</products>
If user clicks on the 1001 sku, I want to get something like this:
<products><item><sku>
Also if I have a custom component, perhaps based on tree or but maybe not, and if this custom component shows the actual XML and used can click on XML elements or XML attributes, how can I use the selected item to get the parent nodes, so if they click on the value="100", I want to get this:
<products><item><sku><quantity>
I need this because I have a set of fields, and users will drag their XML node elements or attributes to my fields, to define a mapping between their XML and my fields.
The selectedItem is just a snippet of XML cut off from its source XMLListCollection, and I might be able to search the XMLListCollection, but what if there were say <sku> elements at more than one level in the XML? I'm guessing a search might return multiple hits for a selected element, when I want the actual parent nodes for the actual selected node.
Thanks very much!

var path:Array=[]
var parent:XML = xxxx.selectedItem.parent()
while(parent){
path.push(parent.localName())
parent = parent.parent()
Or, i didn't get your question and xxxx.selectedItem is "detached" XML snippet ?

Clicking a tree node does not refresh the fields in the table component

hi all,
I am using a tree component along with a table component in my page.so whenever i am clicking on a node it should display the relevant information of that node in the table from the database.But whenever i am doing the page is not refreshing and the old values of the textfields in the table still exist.i have written the code to populate the table in a button click event.It is working fine but the same is not working when i am clicking any node in the tree component.Can anyone provide a solution to this problem.
Thanks and regards,
Prasant Kumar

Never mind... I actually found something that works...
treeModel.nodeStructureChanged(leadSelection);

Frame Duration not selectable when clicking on show info for jepgs & stills

I have imported still images into imovie HD6 and cannot select the duration any clip. I have tried both, pressing apple+i and double-clicking the image.
The only thing that works is the manual slider control in the timeline section. The problem is I'm importing several hundred still clips and don't want the standard (default) of 5 seconds, but rather, 0:00:8 of a second. I was hoping to be more exact than just dragging the slider down. Not to mention manually changing each clip is going to take quite a long time.
Also, I was wondering if there was a way to "select all clips" and then change the duration of all clips at the same time? (so far I've been able to select all and that's about it)
any help would be appreciated
thanks,
-TJ
Intel 2Ghz Core Duo Mac OS X (10.4.6)
Intel 2Ghz Core Duo Mac OS X (10.4.6)

Thanks for the info. It has not completely solved my problem, but I have gotten farther. By importing the images from iphoto instead of a straight drag 'n drop from my desktop, I have now been able set the duration of my frames when importing. I am also able to change each clips duration individually once I double click on a frame in the timeline window.
Here's my dilemma:
I may be able to control the duration of each picture I import, however I can only choose the numbers I can set using the slider. Meaning, if I go in and punch in the numbers manually, even if its within the minimum 00:03, I still get an error that states "I have not set a time within the minimum parameters." You may wonder why I can't set the slider to what I want and that is because my slider control under "photo settings" skips from 0:03 to 0:18 or sometimes 0:15 or 1:10, 1:18, and so on....
clarification:
(i'm talking about as I slide the slider back and forth. It doesn't move up and down the numeric scale evenly. Once I set it on a number, it doesn't skip.
I mean it skips between numbers with no means to refine the number you really want to try—I hope I didnt' confuse further.)
A Little More Background:
I am importing 176 pictures as still clips from iphoto into imovie HD6. I don't know if the number of slides have something to do with it or not, I cannot seem find a definte answer to that. do you know?
Also, once imported from iphoto into imovie, it will not consistently behave the way I assume the program is made, when I try and set a new duration time. Meaning if I wanted to change all my photo stills from the chosen imported time of 00:03 to one of the next numbers on the slider (let's say it's 1:18), and I hit update, it sometimes changes it and sometimes doesn't. More times it does NOT. I have tried "select all" or "select similar" from the menu thinking that my selecting method may be the problem, but these actions don't seem to make a difference.
any ideas on what is wrong? is it a bug or is it something I'm not doing correctly.
btw: thanks for the note on the frame rates. I know I speak less intelligent in these areas. I appreciate the new knowledge.
Intel 2Ghz Core Duo Mac OS X (10.4.6)
Intel 2Ghz Core Duo Mac OS X (10.4.6)

Work item is not opening while clicking in POWL Task under MSS Portal

Hi ,
I have created custom Iview on portal for POWL. I can see my Powl application but when I select work item which contains all task ...and select any one of them it should open WD abap application but its not opening application and giving error.
There is no iView available for system "": object "SWF_WIOBN" "
Please see attached screen shot .
Can any one tell me what is missing.
Regards,
Vijay

Hi Guru,
Any input..its urgent!.
Regards,
Vijay

Excel file not created while running application using executable on different PC

Hi,
I have created an executable and an installer for an application. In this application I am saving data to an excel file using a template. This works fine when I run using the executable on development PC. However when I deploy this application on another PC, excel application opens the template and writes the data but the file is not saved or created at the desired destination.
The path for file to be saved is coming up right but no file is saved.
Development Machine details:
OS: Windows 7
Office version: 2010 (but I am saving file in 97-2003 format)
LV version: 2012
I had checked 'Unlock' option while building the application but stil faced the same issue

This error means that the VI which is downloaded to the FPGA was changed on the host/development system, but has not been recompiled. By recompiling it you resolve this problem.
When a LabVIEW FPGA VI is compiled for the FPGA, the bit stream, which will be downloaded to the FPGA, is stored in the VI file. When LabVIEW RT or LabVIEW Windows attempts to download the bit stream to the RIO card, it makes sure the bit stream corresponds to the VI source code in the same file. This is necessary so that the host application can properly communicate with the VI on the FPGA. If the two are not the same, this error is generated from the Open FPGA VI Reference function in the host application.
Christian L
NI Consulting Services
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

JTree - Sometimes tree node is not selected, while clicking it using mouse

Similar Messages

Maybe you are looking for