Excel file not created while running application using executable on different PC

Hi,
I have created an executable and an installer for an application. In this application I am saving data to an excel file using a template. This works fine when I run using the executable on development PC. However when I deploy this application on another PC, excel application opens the template and writes the data but the file is not saved or created at the desired destination.
The path for file to be saved is coming up right but no file is saved.
Development Machine details:
OS: Windows 7
Office version: 2010 (but I am saving file in 97-2003 format)
LV version: 2012
I had checked 'Unlock' option while building the application but stil faced the same issue

This error means that the VI which is downloaded to the FPGA was changed on the host/development system, but has not been recompiled. By recompiling it you resolve this problem.
When a LabVIEW FPGA VI is compiled for the FPGA, the bit stream, which will be downloaded to the FPGA, is stored in the VI file. When LabVIEW RT or LabVIEW Windows attempts to download the bit stream to the RIO card, it makes sure the bit stream corresponds to the VI source code in the same file. This is necessary so that the host application can properly communicate with the VI on the FPGA. If the two are not the same, this error is generated from the Open FPGA VI Reference function in the host application.
Christian L
NI Consulting Services
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

Similar Messages

Method not found while running tests using MTM.

Test method SupportSoft.RequestAssist.TestScenarios.TestSecnario.ValidatingAttachingFileRequestByUser threw exception: System.MissingMethodException: Method not found: 'Void SupportSoft.CommonUtilities.GUIInteraction.ImplicitWaitForElement(OpenQA.Selenium.IWebDriver,
System.String, System.String)'.
I am getting "System.MissingMethodException" for the scenarios which are using "ImplicitWaitForElement" method. The test case is passing in my machine and any other machine if we use the latest tfs created build of our automation code.
But when we trigger run from MTM, this issue is seen.
Please help me out here.
Thanks and Regards,
Payal Prajapati.

Hi Payal,
>>The test case is passing in my machine and any other machine if we use the latest tfs created build of our automation code.
According to your description, you mean that when you run the automated test method from Test Explorer in the VS IDE, it works fine, am I right?
If yes, as you said the error message:
>>I am getting "System.MissingMethodException" for the scenarios which are using "ImplicitWaitForElement" method.
I suggest you could try to check if you associated with the automated test method in the MTM by opening your test case and then select the ASSCIATED AUTOMATION tab check if associated the automated test method.
(1) If the it is blank in the ASSCIATED AUTOMATION tab , I assume that you did not associated with the automated test method into the MTM, so I suggest you could try to associated with the automated test method in the MTM and then check this issue again.
About how to automated test method into a test case for the MTM,
please refer to the following steps:
1: You can create a test case from MTM and then you can input the test case ID and then press the Enter like the following screen shot.
2: After the test case edit window is opened, you can select the ASSOCIATED AUTOMATION option to open this Choose Test Window, and then associated the
automate test method.
For more information:
https://msdn.microsoft.com/en-us/library/dd380741.aspx?f=255&MSPPError=-2147217396
(2) If you could see the automated test method in ASSCIATED AUTOMATION tab from MTM like my screen shot, please try to copy this automated test case to Test Agent machine and then check if you can run it successfully.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to use a excel file to create a service component?

Dear all,
I want to use a excel file to create a service to be my data source. I used the wizard to do that but i always got a message. "The data format is not valid, fields in each record must be delimited by tab charactors, and each record seperated by new line charactors". How should I reformat my excel file to fit the requirements? I have already chang the field`s format into 'text' type. Thx ^^

Hi Louis,
[Here|http://img125.imageshack.us/my.php?image=exceltestlo7.jpg] is the result of your data. I downloaded your excel sheet and created a simulated service in 7.1.1 and it works fine.
Below are the steps:
1. Go to Tools -> service component wizard
2. The popup opens : Step1 : Enter the name of your service component
3. Go to Excel spreadsheet Copy the data for which the service needs to be created.
4. Step 2 : Paste the copied Excel data in the popup
5. Step 3 : Define Input -> just click next
6. Step 4: Define Conditions -> just click finish.
Let me know if it helps.
Good Luck,
Dharmi

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH

Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.

Do you have any filters applied to your clips?
This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
Anywho, export again, this time with "self contained" movie selected.
Then try to import to Compressor.

ICO file not displaying at run time?

Hello Experts,
I an using fusion 11.1.2.1 32 bit. I have Copied the Icons as well as GIF files in C:\Oracle\Middleware\Oracle_FRHome1\forms\java folder.
At button property i set Iconic to yes
and file = addrow
Icon not display at run time.
but when i set file = abc.GIF
image is displaying at run time.
My doubt is that ICO file not displaying at run time while GIF file are displaying.
Do i need to change configuration ?
Please do the needful.
Thanks
Yash

Hi Yash,
First Try this steps
To resolve this issue, follow these steps:
Double-click My Computer, and then click Options on the View menu.
Verify that the Icon file type appears on the File Types tab. If the Icon file type does not appear in the Registered File Types box, skip to step 10.
Click Icon in the Registered File Types box, and then click Edit.
Verify that the following settings exist, and then click OK:
The Description Of Type box contains Icon.
If there is a Confirm Open After Download check box, it should be selected.
If the settings do not appear exactly as listed in step 4, click Remove, click Yes, and then click OK. If the settings do appear as listed in step 4, skip to step 10.
Click New Type.
In the Description Of Type box, type Icon.
In the Associated Extension box, type ICO.
Click OK, and then click Close.
Use Registry Editor to view theHKEY_CLASSES_ROOT\.icokey, and then verify that the default string contains the following value:icofileIf the .ico key does not exist, create it, and then insert the value listed above. If any other values exist in the .ico key, delete them.
Use Registry Editor to view theHKEY_CLASSES_ROOT\icofilekey, and then verify that the default string contains the following value:iconIf the icofile key does not exist, create it, and then insert the value listed above. If any other values exist, delete them.
Create a new key in the icofile key called DefaultIcon , and type %1 as this key's default value.
Quit Registry Editor, and then restart your computer.
Second Try this
Simple way
Copy your images to:
1
c:\Oracle\Middleware\as_1\forms\java\
Notes:
- Icon files may not be supported.
- In case of a Java security issue when using gif images, you will need to create a jar file and sign it with oracles sign-tool (see below, point 6).
- In case you having trouble with oracle’s sign-tool, do it directly with java’s
Recommended way
1. Create a “icons” folder and place all your gifs in there
i.e. “c:\Oracle\Middleware\as_1\forms\java\<icons>”
2. From within icons folder make a jar file of all the gif images:
1
jar -cvf frmicons.jar *.gif
3. Copy this new jar into “c:\Oracle\Middleware\as_1\forms\java\”
4. Edit/update formsweb.cfg file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg …to update/include:
1
2
3
4
5
6
7
8
9
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin...etc)
archive=frmall.jar,frmicons.jar
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar,frmicons.jar
5. Edit/update Registry.dat file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=icons/
default.icons.iconextension=gif
At this point your icons should work normally, but if you get a security check of Java for gif files then proceed to the next step to fix this. TIP: May need to restart the weblogic/forms server for changes to take effect.
6. Sign your jar file with oracles sign_webutil.bat sign-tool.
path = c:\Oracle\Middleware\asinst_1\bin\sign_webutil.bat
Firstly, you need to edit the sign_webutil.bat as follows:
1
2
3
SET KEYSTORE_PASSWORD=my_password
SET JAR_KEY=webutil2 # will need to change for every run
SET JAR_KEY_PASSWORD=my_password
Secondly, set the environment path and finally run the command:
1
2
3
set path=c:\Oracle\Middleware\as_1\jdk\bin
cd c:\Oracle\Middleware\asinst_1\bin\
sign_webutil c:\Oracle\Middleware\as_1\forms\java\my_icons.jar
This will create your signed jar file. Once initialized from the web-app it should ask the user to “Trust” the certificate and never prompt again.
Other issues you may encounter and may need to edit/update the following files/registry entries as well:
formsweb.cfg
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg
1
2
3
4
5
6
7
8
9
10
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin, ...etc)
archive=frmall.jar, my_icons.jar
...or
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar, my_icons.jar
Registry.dat
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
Registry entries:
1
2
UI_ICON:<path_to_icons_dir>
UI_ICON_EXTENSION: "gif": ".gif" "ico": ".ico"
Credits and further information can be tracked for icons issue here and for jar file creation here.
Hope this will help.

Launching Microsoft Access from Internet Explorer to view a downloaded MDB file opens the wrong file (not a problem if I use Firefox)

When clicking on a link (in Internet Explorer 9) to download an Access MDB file and then choosing to open the file directly in Microsoft Access (2007) instead of saving it, the file is copied to Temporary Internet Files but Microsoft Access tries to open
a different file and displays an (Unrecognized database format) error.
When I click on the option to open the file, the MDB file is copied to Temporary Internet Files\Content.IE5 but instead of that file, Access tries to open a different (incorrect) file located in Temporary Internet Files\Content.MSO (e.g. in the above error
message, NativeView.do is an XML file containing an error message).
I don't see this problem with Word, Excel or PowerPoint files. When opening a Word file (without saving) the Word file is copied to Content.IE5 but an identical .tmp file is created in Content.MSO which when opened in Microsoft Word displayed the required file
correctly. The same happens for Excel files. PowerPoint appears to be handled a little differently (no .tmp file created in Content.MSO but the required file is still copied to Content.IE5) but the PPT file is still opened correctly in Microsoft PowerPoint.
I think the Content-Type "application/msaccess" is fine because Internet Explorer does launch Microsoft Access. It just tries to open the wrong file (or so I think). However, it looks like the file type is not being determined. Here is what I noticed
when trying to open different Microsoft Office files using Internet Explorer:
The last one is the MDB file. As you can see, only for this type of file, the "Type" (Microsoft Office Access 2007?) is not displayed in this Open/Save dialog box.
On Firefox, I don't see this problem. When I tried clicking on the link to the MDB file in Firefox, Microsoft Access was launched and the file was opened correctly. Is there something I can do so the MDB file is opened properly using IE? I can add/change headers
in the HTTP response that writes this file to the output stream (on disk) if that helps.
Thanks for your time!

Sounds like a problem symptom to be discussed in either an IE forum or an Access forum, not here. How did you come to post here? ForumsRedesign. That might be an on-topic issue for this forum. <eg>
Can you find your way to either of those other forums easily from here? Another on-topic question for here I think. ; )
Robert Aldwinckle
Oops, my bad. Thanks for letting me know! :)
I've re-posted it here: http://social.technet.microsoft.com/Forums/ie/en-US/1a818501-296c-42fb-8abb-ba914629c962/launching-microsoft-access-from-internet-explorer-to-view-a-downloaded-mdb-file-opens-the-wrong-file?forum=ieitprocurrentver
Hopefully that's the right place for this.
Cheers!

Error Message: A crash occured on (date) at (time) while running "Applications": Memorymgr.c, Line:5346, Chunk under-locked

I keep getting the following warning:
A crash occured on (date) at (time) while running "Applications": Memorymgr.c, Line:5346, Chunk under-locked
What is causing this? It usually happens overnight while I'm not using my phone... so the first time I touch it in the morning it shuts off and resets. The problem started occuring after Sprint switched from "On Demand" to "Pocket Express". I had no idea of the switch, so when I clicked on it the phone automatically updated to the new application. Since then, my phone has been a mess. I deleted the application, performed a hard reset and downloaded it on my phone again.. but still there's problems. This morning, I deleted the "Pocket Express" for good. I figured it wasn't worth it if it's causing all these problems.
Help... please. I'm a novice, so please make sure the solution is something I can understand. Also, do I need to go through my Palm Desktop/Hot Sync program on my computer and delet files too?
Thank you in advance.
Phone: Treo 755p
Carrier: Sprint
P.S. I also just installed the Sprint Treo software update: Treo755p-1.07-SPNT
It cleaned things up... but not for long.
Post relates to: Treo 755p (Sprint)

After a hard reset and after you delete the program on the device, you will need to rename the backup folder in your username folder on the PC. The backup folder contains all 3rd party programs and settings for your device. When you sync, the backup folder is reloaded onto your device and will bring back the 3rd party programs.
Follow the instructions below for the procedure I described.
Looks like you may need to hard reset and rename your backup folder if you go
to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the
directions to do a hard reset. Next before you hotsync your data back over
you will need to rename your backup folder to do that go here
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.Find your username folder
Post relates to: Palm i705

Error while running application

I am getting the following error while running application...Any help to fix this?
thanks
DeepaKarun
Application lmts-local is already deployed on other targets. Please use create-application-ref command to create reference to the specified target; requested operation cannot be completed
Exception=Deployment failed.
Deployment failed.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:210)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
C:\Creator\Projects\lmts-local\nbproject\build-impl.xml:530: Deployment failed.
BUILD FAILED (total time: 2 seconds)

I am able to identify and fix the problem....Some how even after re-installing the IDE the default server user and password fields are empty. I need to give them manually.

Excel-File not Open in new window

Hello,
i have created a new iView. This iView includes an excel-File. If I open this iView the excel-File will be opened in a new window.
Is it possible to integrate the excel-File into the iView, so that the excel-File will be in the iView when I open this?
Please help me
Regards,
Philipp

Hi Krishna,
i have set this property. But when I open the iView the application microsoft excel will be started and the excel-File is shown in this application. This excel application is not integrated in the iView.
Regards,
Philipp

IPlanet 6.0 and struts (Extension of file not found, while displaying stati

i am trying to launch the strut appln in iPlanet 6.0 when i am making a reqest for jsp i am getting a message saying Error: 404 SC_NOT_FOUND
Extension of file not found, while displaying static content . i do not have any clue on this why i am getting this message.
Could anybody help me regarding this

Hello,
I am experiencing the same problem too. My jsp accesses a javabean. I
noticed, most of the times, I thought, it happened when session was timed
out. But it also happended before the time-out too. I had it set as default
at 30 minutes.
If you find out a solution or some high lights please let me know.
Thanks a lots.
ThuThien Ho
[email protected]
(703) 428-2856
Jordi Lucas wrote:
Hi all,
I have the following problem.
When I try to execute a jsp, the server responds:
Error: 404 SC_NOT_FOUND
Extension of file not found, while displaying static content
This problem doesn't ocurred with all jsp's, it seems that only ocurrs
with the jsp's that call EJB's or JavaBean's.
Anyone has encountered with the same problem?
Any idea?
We are using Iplanet Application Server 6.0 SP3 and IPlanetWebServer 4.1
SP7.
Thanks in advance !
Jordi Lucas Essi Projects
Ingeniero de desarrollo
[email protected] t +34 977 221 182
http://www.essiprojects.com f +34 977 230 170

Not able to run validation using validation.xml & validator-rules.xml

Hello Friends,
I am not able to run validation using validation.xml & validator-rules.xml.
Entire code in running prefectly but no error messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>

<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
</form-beans>

<global-forwards>
<forward name="search" path="/search.jsp"/>
</global-forwards>

<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
</action>
</action-mappings>

<message-resources
parameter="ApplicationResources"/>

<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
</plug-in>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}" resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
</form>
</formset>
</form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
} else {
results = service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come from a real data
source such as a database. */
private static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees.getName().toUpperCase().indexOf(name.toUpperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
     private String name;
     private String ssNum;
     public Employee(String name, String ssNum) {
     this.name = name;
     this.ssNum = ssNum;
     public void setName(String name) {
     this.name = name;
     public String getName() {
     return name;
     public void setSsNum(String ssNum) {
     this.ssNum = ssNum;
     public String getSsNum() {
     return ssNum;
Pls help me out.
Not able to prompt errors.

Hello Friends,
I am not able to run validation using
validation.xml & validator-rules.xml.
Entire code in running prefectly but no error
messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>

<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
ans>

<global-forwards>
<forward name="search" path="/search.jsp"/>
global-forwards>

<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
tion>
</action-mappings>

<message-resources
parameter="ApplicationResources"/>

<plug-in
className="org.apache.struts.validator.ValidatorPlugI
">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}"
resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
/form>
</formset>
form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping
mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new
EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria
was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
else {
results =
service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access
by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come
from a real data
source such as a database. */
ivate static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if
(employees.getName().toUpperCase().indexOf(name.toU
pperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
     private String name;
     private String ssNum;
     public Employee(String name, String ssNum) {
     this.name = name;
     this.ssNum = ssNum;
     public void setName(String name) {
     this.name = name;
     public String getName() {
     return name;
     public void setSsNum(String ssNum) {
     this.ssNum = ssNum;
     public String getSsNum() {
     return ssNum;
Pls help me out.
Not able to prompt errors.
Hi,
Your error message are not displaying because u does not made Message-Resoucrce property file (Resource Bundle) when you make it .
give it entry in
struts-config.xml
<message-resources parameter="ApplicationResources" />
and
define key and corresponding error message to key in this ApplicationResources i.e
#Error Resources
label.search.ssNum=Plz Enter correct ssNum

Need help in creating a sample application using Oracle I\PM 10gR3.

I am a new to Oracle I\PM 10gR3 and I need a guide to create a sample
application using Filer and a sample Process.
I have searched the net and was unable to find any documents. If any body has
any kind of guide to create an application please let me know.
Waiting for a response.

Please see Kenichi Unnai in his blog "How to use UWL API for NetWeaver BPM Tasks"
How to use UWL API for NetWeaver BPM Tasks
The .sca-file can be found on the sap service marketplace, afterwards you need to import the .sca-file, add the SC to your "MyComponents" and then you can select your necessary DC's.

Adobe Acrobat XI Pro. Unable to process the document in the module Save As.File not created

On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"
http://youtu.be/l0a0lWexfNQ.

Hi,
Please post your query in Adobe Acrobat Thread:Acrobat
Regards,
Florence

How to set the size of an Excel-file,Java created in tabbed forma

Hi all,
I'm creating an Excel-file by writing data to an outputStream in tabbed format.
My problem is : How can I set the width of the columns of that Excel-file, not the default-size?
If anyone can help, that would be very nice.
Thanks a lot,
Regards,
Tim

You can write a generic xls file containing a Macro to open and set the column widths of text or csv files. Your java program can then call this generic file to open your text files.

Error - Object variable or with block variable not set while running report

Hi,
I am trying to run BEx reports through portal.
However I am not able to run any report. I am getting following error.
"Run time error '91':
Object variable or with block variable not set"
This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
Also I have authorization to those reports. So doesn't seem to be authorization issue.
Please help me to resolve this problem.
Thank you in advance.
Regards,
Deepti Jain.

Hi Deepti,
Can i knw how you solved this issue?
Regards,
Maili

Excel file not created while running application using executable on different PC

Similar Messages

Maybe you are looking for