Jump Queries issue

Hi,
Right now I have a query in which the user provides the period range as a selection .
The query shows the Material, and sales dollars for that period range in the query. Now I have to provide a detail query which the user can jump to to see the datewise details for the dollars
Is a way I can pass the date selection criterial from the main query to the jump query.
Any help is appreciated.
Thanks

Hi,
Design the target query with all the necessary fields and variables Including the date field. In the transaction RSBBS give the source query which is the period range selection and click on create to give the target query and save the assignment.
regards,
Yamuna.

Similar Messages

Spry Accordion Jerky/Jumping movement Issues in IE

I am having a difficult time trying to debug the accordion in IE. You can see the accordion here in IE I am having two issues.
1. When at the top of the site and clicking on a tab to open it jumps down the page as if it were an anchor point, and I find this very annoying.
2. The movement below the tab clicked is jumping around and this also is incredibly annoying to me, its more subtle than the above issue but it still bothers me. I am having this issue in GC as well.
I have searched quite a few forums and have not found a solution for this but this must be a fairly common issue? I am not that familaur with spry yet this is my first real project using it so my knowledge is very limited to this point. This dose work perfect in FF.
Thanks in advance,

I will put together a gutted version of this and send it over if you have the time that would be fantastic. Making a gutted version may be the best thing at this point so I can slowly add stuff back and see what causes the problem. If i cant fix it by doing that I will zip and send the files.
Date: Tue, 27 Oct 2009 15:23:40 -0600
From: [email protected]
To: [email protected]
Subject: Spry Accordion Jerky/Jumping movement Issues in IE
Can you provide me with files where I can reproduce your issue with
out any other scripts on the site? This gives me a better debugging
area. If you do not feel comfy with posting it online. You can e-mail
it to mailto:[email protected]
>

How to transport Jump Queries (RRI) from DPW to QPW

Hi,
I need to transport the Jump Queries from D to Q.
I have one sender Query and 2 Receiver Queries. I would like to transport them to Q. In the transport connect I can able to select the sender Query and The receiver Queries are not found.
Please let me, If I transport my sender Query will the receiver Queries will be automatically transported.
Regards,
Reddy

How have u been transporting all ur queries?
Its the sameway how u generally transport queries but make sure u find all ur 3 queries with whats underlying beneath in the flow.
In RSBBS open the assignment n on top ull see a Truck Icon - Collect & Transport.

How to create Jump Queries --Report to Report interface

Hi
My requirement is to create a Jump Queries in BW
How can i link 2 Queries in BW...so that when User executes Report 1 then if he want he can able to jum to Report2 for a detail information from report 1
and
How can i create a Jump from Report1 to R/3
Thanks in advance

Hi BW user,
Go through these links.
http://help.sap.com/saphelp_nw04/helpdata/en/91/d2b0fc58952b46827453498c8420ad/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/156e3fefa13042e10000000a114084/content.htm
This article would also help
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9
Regards,
Sunmit.

BI RRI for Jump Queries

Hi,
We configured BI Jump queries from BW to ECC systems. When BW jumps on to ECC system it uses remote user configured in the Source System and it launches ITS url on ECC system which gives the results after passing user ID and Password.
My question here is:
1. Is it possible to configure such a way that it will not use Remote user configured in Source System. I am OK with creating another source system for the same SID and System. I need to know how to create additional source system for same SID and System if this helps.
2. Even if we use Remote user is there a possibility of not prompting for user ID and Password when it jumps to ECC system?
The query goes in to ECC like this
End user from BW Bex ---> ECC Remote user on ECC (How SSO will work in this case)
Is it possible to user current user by creating one more source system and a seperate RFC?

Please search the forum and you will find lots of good info on both of your questions.

Question on Jump Queries

Hello Everyone,
Generally we build the jump queries in RSBBS and do the config to create jump query link from summary report to a detail report.
I know how to find the relationship for set of queries whether they have jump queries or not.
But I don't know if I have the detail query and now I need to find the parent query. I have a requirement in which the list of queries ( child queries - detail queries ) and need to find the Parent Query ( summary report) .
Steps to find the Jump query links (like summary to details query relationship).. Follow the below steps.
Go to SE11 -> RSZELTDIR table name ->
Provide your summary query name 'Query 1' in MAPNAME and OBJVERS A. Now you get
the ELTUID of that summary query
Now go to SE11 -> RSBBSQUERY and provide
ELTUID [of Query 1] and now you see list of RONAM connected with this query.
Again get RONAM from RSBBSQUERY and provide it in
SE 11 -> RSZELTDIR -- ELTUID..now you get your detailed query name 'Query 2'
in MAPNAME of RSZELTDIR
Similary I need to know how to find if I have Child query ( detail report ) and now I need to find the Parent report ( summary report). I tried finding out but did not succeed. Need your assistance.
Looking forward for your inputs.
Appreiciate your help in advance.
John.

Hi John,
Try this;
1. Go to RSZELTDIR table name -> Provide your child query name 'Query2' in MAPNAME and OBJVERS A. Now you get the ELTUID of that child query (say query2ELT).
2. Go to RSBBSQUERY and provide query2ELT* in RONAM field. Don't forget to add * to query2ELT.
Now you get the ELTUID of the parent query in ELTUID ( say query1ELT).
3. Go to RSZELTDIR table and provide query1ELT in ELTUID field and OBJVERS A. Then in MAPNAME you will find the parent query.
Regards
Yasemin....

Destinations jump queries

Hello,
I understand that to define the destiny of the jump is performed queries from the transaction RSBBS, but what is clear is not me if I define a destination for a jump querie that run from BEX analyzer, the same fate jump me serves to execute the same querie in WEB, or I have to define another to operate a Web?
Regards,

You don't have to create new query to run it on Web. But it is better to have a distinction in the name space to differentiate between Bex Queries and Portal/Web queries.
In RSBBS you just need to define the name of the query where you have to jump to.It should be very simple and clear.
Hope this helps.

SAP Tables for Bex Jump Queries

Hello Everyone,
Need to know, is there any SAP table which stores the list of jump queries in the system.
Can you share your inputs.
Regards,
John

Thanks all for the reply. I can able to get the query name using two table rsbbsquery and rszeltdir table...but i just able to get the query tech name which i dont know whether it is a summary query name or the detail query name... so how can identify ???
I have one more follow up question with reference to the SAP table...
Lets say we are creating a jump query from summary query " Query 1 " did the jumpto config on the plant characterstic and jumping to detail query " query 2".
I would like to see the query 1 to quer 2 relationship in the table.
Do we any table which stores this information, after creating the config in RSBBS.

RRI and Jump Queries

Hi All,
What is RRI and what is use of it?
What are Jump Queries and use of it?
Can any one explain me the above two concepts with some senario.
Thanks in Advnce,
Khushi.

Please search the forum and you will find lots of good info on both of your questions.

Partition a cube, Jump queries.

Hi all,
1. When do we partition a cube?
2. Why should we link reports in jump queries? Where do we use them?
Thanks in advance,
Sameer.

Hi,
For Partition of cube
Just right click on Infocube -> Change or doble click on the infocube to go to infocube maintenace. From the menu choose Extras ->Partioning.
Now ,if say, your requirement is to extract data as it is from different tables, you can go with view. But if there is some complex business logic to be included, you can do that in a FM.
Check the folowing links for jumping.
http://help.sap.com/saphelp_erp2005/helpdata/en/81/941139a772b30de10000000a11405a/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5a/ec1e4203fadb2ce10000000a1550b0/frameset.htm
Please reward.

RDweb 2012 excel jump list issue for win 7

Hello All,
I am installing win 2012 server RDweb test lab. everything working perfect but Excel 2010 jump list now showing up on client side (win 7 Embedded thin client) remaining all office application Jump list working perfectly.
I tried to clear recent jump list but nothing is happen.
Could you please help me to resolve.
Thanks.

Hi Sunil,
Thank you for posting in Windows Server Forum.
For Excel jump list issue you can try below suggestion as it may get your issue resolved (Quoted from below articles).
Jump List...that is corrupted in AutomaticDestinations-hidden system folder is the likely solution.. To resolve and fix the issue, follow these steps:
1. Open Windows Explorer .
2. Type or copy and paste the following into the address bar:
%AppData%\Microsoft\Windows\Recent\AutomaticDestinations
3. Identify files that are comparatively larger in size than the rest of the file, such as files that have file size of 1 MB or more.
Delete the abnormal file.
Tip: If you do not want to retain the Jump Lists’ recent items history on all applications, just delete all the automaticDestinations-ms files in the folder.
4.The recent items functionality on Jump Lists will be restored. The recent items on the Jump Lists will be re-added as the program is been used. However, do note that the solution does not restore the previously pinned items. So user will have to pin new
items again.
Source:
Jump list not working correctly in windows 7
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/jump-list-not-working-correctly-in-windows-7/d70c15f9-b48f-45a1-bdc7-cd96d77d9837
Apart you can refer this thread also which describe other registry solution if above one
is not useful.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Transport Request for Jump Queries

Hi,
When i try to create a transport request for the jump queries using the transport connection button in rsbbs tcode i am able to create only for the sender query but
my jump query has one sender and two receiver queries.
Could anyone of you tell me the process of creating a transport request for the jump query,
regards,
vamsi

Hi,
the request for the jump queries contains for sure the jump queries. Edit the request and double click on the entries and you will see that it transports the contents of tables rsbbsquery, rsbbsqrydir, rsbbsqrymapping... for the key arguments <your sender query> or <your sender cube>. Those table entries will contain also the information about the receivers.
regards
Siggi
Message was edited by:
Siegfried Szameitat

PLEASE EXPLAIN JUMP QUERIES........

Hi Experts,
Can someone please explain to me the concept of JUMP QUERIES.
Any documentation would be highly appreciated.
Thanks in Advance

Hi,
Jump Queries: This is also known as Report to Report Interface (RRI). Here, we have 2 queries that get linked up. One is a Sender Query and the other is a Receiver Query.
Define 2 queries and have a few characteristics in common.
Goto t.code RSBBS. Fill in the query from which you want the Jump, ie. Sender Query. Then give the name of the Receiver Query. Here, the queries are linked up.
Now, when you execute your Sender query, in the Context Menu (right click on the characteristic) you get the option of "_Go To_". On clicking that, a new screen opens up and the data from the Receiver Query is displayed.
Hope this helps.

Report Queries issue

Dear friends,
I am working with Oracle APEX 4.2.2.00.11, I tried to create a report with more than one "Source Queries", the issue is when I run the report or test the report just the first source query run and printing in print lay out. the second or third one didn't print. I tested it with PDF,HTML,... output format, the results are the same.
Please let me know how to fix it.
Regards,
Babak.

What do you mean by "more than one Source Queries"? Is it a classic or an interactive report?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494

Standard and Non-standard exports and queries issue

Hi,
We have created a few STANDARD books with standard exports in them. The standard exports use standard queries.
The ISSUE is that in the Verifications/Filters tab, where we have put in a lot of queries - ONLY the STANDARD queries show up. We would like to have all the queries show up. I am the adminsitrator and still only the standard ones show up.
I am worried that if I "Save As" the export as a non-standard export, it does not allow me to uncheck the standard tick column and save it but I have to manually change the name of the export. Can we change this in anyway?
Is there a system preference where I can allow all the queries to show up in the verifications/filter tab at least for the admnistrators if not for all? Thanks
- Ad

Thanks for your input but DRM does seem to be behaving what you said or may be I am still missing something here.
I created a standard query.
I have a standard export.
Now, in the verification/filter tab of my Standard export, I am able to see my standard queries.
But,
I am unable to see the Non-Standard Queries.
HOWEVER,
If I have a Non-Standard export --> I am able to ALL the queries. This makes it a lot more flexible in doing things.
My question is the WHY are my standard exports not able to reach the non-standard queries. What I wanted to do a twist in my export for analysis purposes for a particular use. If non-standard exports have access to Standard and Non-Standard queries --> it just makes more sense to always use a non-standard export and create non-standard queries.

Jump Queries issue

Similar Messages

Maybe you are looking for