JUST BOUGHT WRT54G LINKSYS ROUTER, NEED HELP WITH SET UP PLEASE!
I've tried everything to get my WRT54G to work but no matter what I do I can't get past step ten on the CD. It asks for my password and when i type and confirm type it then press next it comes up with, Router Configuration Error. Would you like to try again?
I've been stuck at this for over two hours now, please help me
Madi-Liu
I had the same problem this past weekend. The CD is the problem. It is much easier to go to www.linksys.com/connect and first update the firmware (if applicable), and then use the EasyLink Connect tool. I works very well.
Good luck,
Mike
Similar Messages
-
Purchased extreme to replace modem/router DSL used telephone cord need help with set up
Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible). -
I need help with setting up my Sun Java Studio Creator
Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam -
Hello, Just bought my first Mac. Trying to set it up. This may sound stupid but I'm on the page that asks : Select a Wireless Service,then it lists :
2 wire 313
2 wire 675
2 wire 988
other network
Sorry But I just don't know what this is referring to. Can someone please help & explain how to proceed?What you are seeing is a list of wireless internet (WiFi) networks available in your neighborhood. You can join any one of them as long as it does not require a password to join, they may be your neighbors or your own network. People here will tell you to feel guilty about stealing your neighbor's WiFi, but ignore them.
2 Wire is a Qwest DSL modem, and a darned fine modem too, with a strong signal. If you have Qwest DSL one of those may be yours already. If so, it would probably be the strongest signal. Once connected, click here: http://192.168.1.254/ and try to login to the modem's configuration. 2 Wire modems all give themselves a random number in the network name so they are all unique in the area. You can change the network name to something meaningful in the configuration, but most people are too lazy to do it. -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
[SOLVED] Need help with setting up X
Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help. -
I need help with setting up time machine for backup
I would like help with setting up time machine for backup.
You will need an external hard drive (formatted for a Mac).
Then you plug it in and go to system preferences>time machine and select the external HD and turn it on.
The backups are automatic.
Barry -
I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
ElisabethOpen the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.
-
Need help with Portal Themes -- Please help
I need help with Portal Themes. I have read every document I can find but I am having no luck. All I want to do is change the colors for the Exceptions on one of my queries. I have created my own Portal Theme where I have changed the colors but I do not know how to assign my newly-created Portal Theme to my query. Can someone please give me the detailed steps on how to do this? Please help because this is driving me crazy.
Thanks.
RyanHi,
Refer
Exceptions - How to change the colors
This may help.
Thanks,
JituK -
Just bought new time capsule- need help setting up WiFi network with another router
Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working. -
WRT54GS v1.1 NEED HELP WITH FIRMWARE!
'ello, I am sick and tired of getting disconnected by my linksys router and i did smoe research and it appears to be a malfunction in the firmware. Now this is the real problem... I went and i found a Tomato firmware for me and I used winzip to extract the correct file i needed but it is continousily failing. So can someone pelase tell me exactly how to download this firmwar. PLEASE HELP!
Kra-Z Baller,
You can hold down Shift on your keyboard and click on Restore. This will allow you to restore to a different version of the firmware if it's already been downloaded.
The firmware files are stored in this location:
C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
It's highly recommended to use the iPhone with the latest version of firmware released.
Raleigh -
Just bought new Time Capsule, need help setting up...
Okay so I already have my wireless network set up in my house with two airport expresses, I have the airplay and wireless printer set up as well.
Just bought a time capsule today and want to know the best way to set it up. Is it best to use the TC as the "main" wireless router, connected to my cable modem? Is it harder to set it up this way, am I going to have to hard connect the printer to set it up with the Time capsule?
ThanksHi,
Personally, I would always use the AirPort device that provides the fastest wireless performance to create my main wireless network.
If you bought a Time Capsule 4th Generation, http://support.apple.com/kb/SP627 chances are high that it is the fastest device you own.
I would set it as "Create a wireless network" and set the two AirPort Expresses as "Join a wireless network" or "Extend a wireless network".
Enjoy your new device !
P- -
Just bought a macbook pro, need help.
Hi everyone, I just bought a macbook pro 15" intel core 2 duo, 2.16GHz and the person I bought it from did not erase anything. I myself have a macbook but I bought this for my girlfriend as a gift. I am having a problem changing the name of the user. I have already changed the username and the password but in the finder, where it usually says "user" it says Elle (previous owner). So I was just wondering how I can change this, I have read other people's posts and a lot have to resort to erasing everything and reinstalling the software, but I don't have any of the software and neither does the person I bought it from. Does anyone have any suggestions? Thanks!
I would never run a used Mac inherited or purchased from someone else without wiping and re-installing Mac OS X. You can't really know how well it was maintained or what could possibly be on the hard drive - in terms of system security configurations, legalities, as well as just things that could have been misconfigured and/or create compatibility issues, etc.
Much cleaner and neater to just wipe and re-install. -
I need help with my setup Please !!! 2800+ athlon xp
hi all .......... great forum here.....!!!
I am having probs with my new setup and I am at a wits end of what to do so i'll explain my problem.
I have just bought a AMD athlon 2800+ cpu for my mobo (KT3 ultra 6830e v.1.0)
and I am unable to run the chip at correct speed??
The bios wont boot the computer if I try to set the fsb for cpu at 166 ?? Am I correct in thinking that a 2800+ Athlon needs to be run at 166fsb to get the 333fsb setting?
I am currently running it at 133fsb and it is registering it as a AMD 2200+ chip ???
I am quite new to playing about with my bios but at the moment it is set at defaults on everything because i had to reset the cmos jumper about 8 times last night after trying different settings, in the end i gave up and thought i'd ask u guys for help???? Please !!!
I spoke to the shop i bought the chip from and we got talking about that when i set the fsb for chip to 166 it changed the ram settings to host clock + 66 (host clock was set at 100mhz) thus trying to make my 2100 ram(266) run at 2700(333) specs ?
Is this the problem why my computer wont boot when it is set to 166 fsb cuz it is asking the ram to be 333ddr when it isn't???
Is my problem going to be solved if i purchase some 2700 ram ?? if so i'll be quite happy, or is my board just not capable of running this 2800+ cpu on it???
i read up b4 i bought the cpu and i thought i was able to run this chip maybe i read wrong? any help would be greatly appreciated , oh i also flashed my bios to the most recent msi update which was 5.7 i think (AMI bios) and the flash was succesfull (LOL) very worrying!!!!
anyway hope i have explained my problem well enough as i myself am very confused!!!!
Thanks in advance
Davei have just had a look around the net and it looks like there are two versions of the 2600+ available one with 133/266fsb support and the other with 333fsb ???
Do u know that if i take my 2800+ back to the shop and change it for a 2600+ cpu if i should just get a normal one(133/266fsb) or get the 333fsb version???
as that link u posted for the mobo supported cpus only lists the 2600+ as being a 133/266fsb chip ???
I will get some 333ddr ram as well just incase i need this to allow the 2600+ to run correctly
Also (sorry to be a pain) but can you explain to me how to change the multipliers correctly to get full power from the chip ?? as i read that a 2600+ comes out at 1.91ghz standard , but i was reading a review where the user was told by AMD that it will run higher by changing fsb or multipliers (or both?) ???
Do u have to set the fsb to 133 and then change the multiplier to a value to up the speed or just keep changing the fsb alone and leave the multipliers alone ????
Hope you can help me......
Thanks once again for your replys..
Dave -
Need help with setting up Internet sharing to PS3
Hey, so I am trying to use my Macbook as a wired router to my PS3 (My Macbook is on my wireless Linksys router and I have the cable needed to create a wired connection from my Macbook to my PS3. I had this setup working once before after getting a specific set of numbers from a google search but can't seem to find that page anymore. I've only been able to find threads on creating a wireless connection. So here is my problem. From system prefs, I am entering into my PS3 all the numbers my Macbook is giving me from system prefs (my IP address, default router, subnet mask, and DNS servers). But ever time I run an internet connection test I get DNS Error 80710102. If someone could help me it would be greatly appreciated.
Really?? I know this problem was solved before on the Apple message boards but I've been searching for it for quite some time and have yet to find that thread. Can someone help me with this??
Maybe you are looking for
-
Can't copy Iphoto library from external drive to hard drive
I have a 210 gig iphoto library that I am trying to copy from an external hard drive with 440 gig of avaliable space. I am getting a message say it can't copy because there is not enough space. The math doesn't add up
-
Mavericks cant be installed???
Hey, I currently am running OS X 10.7.5. I just now went to the app store to upgrade to Mavericks and it tells me it "cannot be installed on this computer". I do indeed meet the system requirements. HELP!!! Thanks
-
Installed OS 10.9.5 and now screen is frozen. Cannot restart or shut down.
Installed Yosemite 10.9.5 and now screen is frozen. Cannot restart or shut down. Have done Repair Permissions but still not working.
-
Hi all, i have a layer "A" size:120*150x and layer "B - background" size:800*600px. How can i set layer "A" on coordinate x =258px;y=157px. Without need to apply ctrl+t mode. Thanks for reply.
-
I am a newbie and need to know how to set it up so part of a image goes to a website. I don't know what it's called to look it up. thank you!