Just finished the update re/iOS5 on my ipad, now message comes up "enter PUK" I have never used this iPad with 3G Any suggestions? I don't think I ever set up a SIM PIN
Help?
If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter
Similar Messages
-
iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help
Hi ..
Follow Apple's instructions for recovery mode here > iOS: Unable to update or restore
You can restore from a backup. -
I want to get a Nikon D3100, but my macbook has OS 10.5.5 on it and I've read that the D3100 needs at least 10.6.5. What will happen if I try to use this camera with my computer? Will iPhoto simply not recognize it or will I get distorted pictures, or....what?
andyBall_uk wrote:
The manual says
❚❚ Supported Operating Systems The supplied software can be used with computers running the following operating systems: • Windows: <snip>
• Macintosh: Mac OS X (version 10.4.11, 10.5.8, 10.6.4)
Nikon say that you need 10.6.5+ for the latest firmware, although I don't see why.
Thanks for that! I was looking for that manual, but for some reason, couldn't find it.
I guess I'll have to contact Nikon and find out what the real story is. The camera was introduced in '08 or '09, so I'm wondering why you'd need software as recent as 10.6.5??
Still very confusing. :-?
Why does it state that the camera is compatible with "10.4.11, 10.5.8..."? Does that mean that anything between 4.11 and 5.8 is incompatible???
BTW, I tried downloading the 10.5.8 combo update recently and got an error message that the update was "corrupted" after it was all downloaded, so I was not able to install that. -
I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestions?
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
Additionally, your 24 hours don't start until you begin to watch the movie, you have 30 days to start watching the movie. -
I just ran my updates for my MacBook Pro and now my iphoto won't open. I get a pop up that say's You can't use this version of the applicaton IPhoto with this version of os x. You have iphoto 9.2.3.
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
OT -
I have upgraded my ipad2 to the latest ios. shortly after this message came up: "ipad is disabled, connect to itunes". I have never synced my ipad2 to itunes and don't have any backup. Is there any way to bypass this without restoring the device? I have many articles on "iAnnotate" that can not afford to loose.
You can't bypass it, you will need to connect iPad to a computer's iTunes, and you may need to put it into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad, which will remove all content from it.
You haven't been backing up to the cloud either, and/or keeping copies of important documents/files elsewhere e.g. on your email account, Dropbox etc ? -
I updated my iphone today, 3G, and I am now unable to get wifi within my home. It stays on 3G. any suggestions?
reboot your router.
on your phone - settings - general - reset - reset network settings. -
I updated my Ipad( ios 7.1) & now it is asking for my PASSCODE ...I NEVER used a PASSCODE ,so now I am unable to use my IPAD because I DO NOT or NEVER have used a passcode ..my IPAD is useless ..I am locked out because I have NO passcode to use! HELP!!!
I have seen other users talk about this and make the same claim. Unfortunately, even if you didn't set a passcode, and the iPad is insisting that you did, unless you can successfully guess what the passcode is, you still have to follow these instructions and use one of the methods in here in order to restore your iPad which will then unlock it.
iOS: Forgotten passcode or device disabled after entering ... -
i have updated my iphone 4s with the new iso7 software, and now my phone is locked. It is asking me for a code, but I have never locked my phone, so therefore have no idea what the code could be. How do I get back into my phone without loosing any data
Check Settings>Messages>MMS Messaging and make sure it's set to "On".
-
Updated to 10.6.8 and now safari, system preferences, address book say "can't use this version"
Got a new harddrive in my 2010 macbook pro and rebooted it with time machine back up from a older mac running 10.5.8. I loaded snow leopard 10.6 from disc then updated to 10.6.8 on new computer after restore from back up. Now the Safari icon, system preferences and address book won't open and a box opens saying you can't use this version of the application system preferences with this version of mac os X You have sytem preferences 5.2. or safari says you have safari 5.0.6 etc. How do i update the apps so i can make them actually open. I can get them open in a round about way but not from the icons on my sidebar.
If you have an os on the hdd, why not do a clean install of the os (erase the drive and reinstall osx snow leopard) For snow leopard you insert the osx disk, restart the machine while holding down the c key
http://support.apple.com/kb/HT3910
Message was edited by: victoryhat -
after trying to update my i phone , the update has obviously failed and now itunes asks ,e to restore my iphone , have tried this but the restore has now taken over 24 hours ans still not complete ./ have tried to reboot pc and i phone and try restore again , but still nothing ,
try HT1808
-
My Ipad went into disable mode after my grandchild entered the wrong passcode several times. I have the correct passcode, but I have never synced the IPad. It says Connect to Itunes Diable Ipad. I have many pictures I do not want to lose and I have never backed up. Is there a way to open the Ipad without losing all of my pictures or data.
You should be able to recover any pictures you have taken on your iPad (in Camera Roll), but not application data etc, by connecting, via USB not wifi , to your computer.
If you are using a mac, connect your iPad, if iTunes automatically launches close it, run iPhoto and wait till your iPad is shown under Devices, you can then import all or selected photos.
If you are using Windows, again connect and close iTunes if it starts. Then browse the device using explorer, your photos will be shown on the device in My Computer held in a folders under DCIM (or something similar), you can copy and paste them into which ever folder you want on the PC.
The rest I'm afraid is gone unless you can remember the passcode, sorry.
Hope all goes well.
Cheers
AF -
Need to add something in the message!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99928) -
Since I update to the Apple TV 5.2 my screen is out of sync so that the images look miss colored and there are artifacts appearing on my screen and when I move to different screens I can see delayed redraws that leave artifacts on the screen
Welcome to the Apple Community.
No that's not a problem that has been reported with 5.2, it appears specific to you.
Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. -
I'm on my company website and all of the content appears much smaller than usual. I can't find Tools to adjust the appearance. I check on Internet Explorer and the same website looks normal.
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Maybe you are looking for
-
Using multiple MIDI in and out ports... is there a any solution?
Hi Guys, I've been using Logic Pro for about 3 or 4 years, and have always struggled with the fact that when using external MIDI instruments, there are not separate drop-down menus for PORT IN and PORT OUT, where I could choose which port would be us
-
.dmg files no longer open in the finder
I just did an archive and reinstall (to solve some unrelated problems). Most things seem fine, but now .dmg files show up on the desktop without any icon, and when I double click them they open Disk Utility instead of mounting in the finder. It's pos
-
Down payment allocation in F-54
Hi All, I want to reserve the advance payment made for a particular PO get reserved in F-54, is there an user exit or some enhancement in which i can allocate an advance payment based on the PO number which is already entered while making advance pay
-
Webservice response times --How can we improve ?
Hi All, I am making two different calls to a Function module from java 1. web service 2. Jco When I go to STAD transaction i can see webservice response timings are more compared to Jco. What intresting here for is CPU timings and DB timings. Some
-
Exchange 2010 failing to upgrade to SP1, SP2, or SP3
My host server is running Windows Server 2008 R2 Standard. Currently Exchange 2010 is without any service pack. I initially tried to upgrade to SP1 but that failed with the message below. Thinking that I could perhaps skip to SP2 or even SP3 I attemp