Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ?

Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ? if yes then, where can i find this option
Windows :- 2k8 R2

Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ? if yes then, where can i find this option
Windows :- 2k8 R2

Similar Messages

  • Does the UCS C-Series Servers supports PCI/e card digium T1/E1

    Hello,
    Does the UCS C-Series Servers supports/compatible with PCI/e card digium  TE407P/TE420 T1/E1.?
    The server will be used as Asterisk server.
    Thanks
    Philip

    Hi Philip,
    Compatibility will depend on the server model that you have and whether the digium card is a full length, low profile, or half length pcie card.  Take a look at http://www.cisco.com/en/US/products/ps10493/prod_models_comparison.html#~tab-a for details.  If there are any issues with the card itself once it is installed it will have to go through the 3rd party manufacturer.

  • Ask the Expert: Cisco UCS B-Series Latest Version New Features

    Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the Cisco UCS Manager 2.2(1) release, which delivers several important features and major enhancements in the fabric, compute, and operational areas. Some of these features include fabric scaling, VLANs, VIFs, IGMP groups, network endpoints, unidirectional link detection (UDLD) support, support for virtual machine queue (VMQ), direct connect C-Series to FI without FEX, direct KVM access, and several other features.
    Teclus Dsouza is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has over 15 years of total IT experience. He has worked across different technologies and a wide range of data center products. He is an expert in Cisco Nexus 1000V and Cisco UCS products. He has more than 6 years of experience on VMware virtualization products.  
    Chetan Parik is a customer support engineer from the Server Virtualization team at the Cisco Technical Assistance Center in Bangalore, India. He has seven years of total experience. He has worked on a wide range of Cisco data center products such as Cisco UCS and Cisco Nexus 1000V. He also has five years of experience on VMware virtualization products.
    Remember to use the rating system to let Teclus and Chetan know if you have received an adequate response. 
    Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center community, under subcommunity Unified Computing, shortly after the event. This event lasts through May 9, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

    Hi Jackson,
    Yes its is possible.    Connect the storage array to the fabric interconnects using two 10GB links per storage processor.  Connect each SP to both fabric interconnects and configure the ports on the fabric interconnect as “Appliance” ports from UCSM
    For more information on how to connect Netapp storage using other protocols like iSCSI or FCOE  please check the url below.
    http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-6100-series-fabric-interconnects/whitepaper_c11-702584.html
    Regards
    Teclus Dsouza

  • IPv6 en de Cisco UCS B - Series

    Los Cisco UCS B - Series soporta ipv6?

    Hello Mario,
    If your question is towards UCS management interfaces (FI and VIP interfaces) supporting IPv6 addresses - the answer is NO, UCS currently does not supports IPv6.
    This is on the roadmap but nothing commited as of now.
    ./Abhinav

  • Lync 2013 Standard Edition on Cisco UCS E-Series

    Hello,
    We have a working Lync 2013 deployment:
    - Front-End Enterprise Pool consisting of 3 FE servers
    - one Edge Server
    - one Back-End server
    - one Mediation Server
    - one IP PBX gateway, where ITSP's SIP trunks end.
    Because we have geographically distributed offices, we are considering deploying of branch offices deployments.
    Technet recommends to use SBA for branch offices where there are less than 1000 users. But in case of WAN outage, no conferencing will be available for branch users.
    Lync 2013 Standard edition branch deployment would offer all Lync features in case of WAN outage.
    In every branch, we consider deploying a Cisco ISR G2 router for terminating branch SIP trunks. This equipment have option to add Cisco UCS E-Series blade that supports CPU with hardware virtualization and supports decent amount of RAM (up to 16GB and up
    to 48GB).
    Have anyone experience with deploying Lync Standard Edition on this equipment - Cisco UCS E-Series blades? In every branch office there are up to 50 - 500 users that will use Lync.
    Thanks,
    Andrei Moraru Endava

    Hi,
    I don’t think you can deploy Lync server 2013 on Cisco UCS E-Series blades.
    Here is a link below of “System Requirements for Servers Running Lync Server 2013” may help you:
    http://technet.microsoft.com/en-us/library/gg398588.aspx
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Does Cisco MOC RCC Plug-in support Windows 7 64bits?

    Hi,
    I tried to install the Cisco_MOC_RCC_Plug-in.msi on a Windows 7, 64 bits. (CUPS is 7.0.8, the plug-in is coming from the CUPS server)
    I use the command line, I receive the installation windows, do a complete install. But, after I don't see the Cisco Phone Selection tab in the MOC.
    The same steps works properly on Windows XP, 32 bits.
    I verified the Cisco document but they never mention the OS supported by the RCC plug-in.
    Does Cisco MOC RCC Plug-in support Windows 7 64bits?
    Thanks

    Hi,
    Actually, it is mentioned on the CUPS server itself on the page of the plug-in download (CUPS Server admininstration > Applications > Plugins > ..).
    Here is a copy/paste from CUPS 8.0.4.x -
    "The Cisco Unified Presence Microsoft Office Communicator (MOC) 2007  Remote Call Control plugin allows MOC users to select which phone line  they wish MOC to control. When installed, the plugin will expose a CUP  web page within the MOC application where users can change their current  MOC phone line of control. This version is supported on Microsoft  Windows XP/Vista"
    Although it doesn't mention windows 7 (32/64) (meaning dev team haven't tested it to certify), please feel free to give it a try.
    Thanks

  • Certification of Cisco UCS B-Series blades

    Are there any plans for certification of the Cisco UCS B-series blades?
    As far as i can find on the novell website they are already certified for SLES11 from Novell.
    Greetings, Stefan Dietz

    Hi Stefan,
    yes, we will certify CISCO hardware. Hopefully this will happen during the next 6 months. I cannot give more specific information at the moment. The SLES11 certification from SAP will also be available soon (see SLES11 thread in this forum as well).
    Thanks,
      Hannes

  • Cisco Speech Connect Network Fault Tolerance

    Hi,
    I have redundant core network infrastructure. Is there any way to do Network Fault Tolerance in cisco speech connect like the one in Cisco CallManager (5.x and later)?
    Thanks,
    Ashraf

    As of the latest version of Speech Connect version 1.0.3 there is no support for Network Fault Tolerance.
    You could speak to a Cisco account rep and request this feature enhancement be considered for future versions.
    Thanks,
    Scott

  • Does OC4J 9.0.4 standalone support HTTP clustering?

    Does OC4J 9.0.4 standalone support HTTP clustering? If so, could someone point me to the correct documentation for setting this up?

    Yes the container supports it. You need to configure it manually using the XML files. The Oc4J Users Guide should document it for you. There's no load balancer capability so you need to use some 3rd party solution such as Web cache, Distributor, etc.
    I can't get to the doc site right now so I can't give you the full URL to it. But have a hunt around and you should be able to find it.
    cheers
    -steve-

  • Does rcapi on 800 series routers support CAPI version 2.0?

    Does rcapi on 800 series routers support CAPI version 2.0? In that case: Is a certain IOS release mandantory?
    Best Regards,
    Martin Funke
    K&K networks

    Does rcapi on 800 series routers support CAPI version 2.0? In that case: Is a certain IOS release mandantory?
    Best Regards,
    Martin Funke
    K&K networks

  • Error: Failed to parse path in URl (Cisco UCS 6100 Series Fabric Interconnect)

    I have to shut down parts of my network due to an electrical outage this weekend. I have a Cisco UCS 6100 Server Fabric Interconnect. I am trying to backup the configuration. This is the command I am using create backup tftp://*.24.1.88 full-state enabled.  The error I receive is Error: failed to parse URI.  Which I believe URI means URL.

    Hi Parakiteiz,
    Looks like the format is incorrect and you have an extra 't' on the tftp command you provided.  Please take a look at the link below for configuration assistance.
    Creating backup operaiton.
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-1-1/b_CLI_Config_Guide_1_1_1/CLI_Config_Guide_1_1_1_chapter38.html#task_4704260519853629974
    Please let me know if this help

  • Error Compilation MIBs Supported for Cisco UCS C-series software release 1.4(3) and later releases on IBM Director 6.3.2

    Hi,
    I have an IBM director 6.3.2 on a Windows Server 2008R2
    I try to install the MIB for manage Cisco UCS C-460 server.
    I downloaded the mib on the cisco ftp.
    the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
    But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
    Ho can I fix this issue...

    Hi,
    I have an IBM director 6.3.2 on a Windows Server 2008R2
    I try to install the MIB for manage Cisco UCS C-460 server.
    I downloaded the mib on the cisco ftp.
    the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
    But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
    Ho can I fix this issue...

  • Creating backup from PC app just like Desktop Manager does

    Is it possible to backup a connected phone from a PC application? Is there any API for that? I don't want to perform sync and write addon for Desktop Manager; I just need to backup phone databases without using Desktop Manager shell.

    as far as I know those APIs are not public. You can sign a contract with RIM I guess.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • How to upload data within apex application? just like the utility does

    Hi,
    We have an application of apex, we need to input a lot of data from Excel type form to apex. We print the report/form in excel, and then we input them into the app application.
    sometimes it is very time consuming for the end users of the app inputting data within the app itself, with either single row form or tabular form.
    So, I often input data by myself by means of application express s*ql workshop, utilities/data workshop, copy/paste* , but the problem is that you should the know the underline table names for those input datas.
    So it is not good if I let my end users input data directly by means of data workshop.
    So, is it possible that I make a data workshop like stuff within my application, that my end users can upload data with it?
    Thanks,
    Peter
    Edited by: Yawei Zhang on Nov 4, 2010 8:10 AM

    Hi,
    This might help
    Import excel file through a APEX page and store the data into database
    Regards,
    Jari
    Edited by: jarola on Nov 4, 2010 2:18 AM
    See this also , if you use Apex Listener
    http://krisrice.blogspot.com/2010/02/another-apex-listener-ea-more-knobs-to.html
    Edited by: jarola on Nov 4, 2010 2:22 AM
    And I find this also
    http://jon-trostheim.blogspot.com/2010/01/drag-and-drop-data-from-excel-into-apex.html
    And Denes Kubicek have write about external tables. There is 3 samples
    http://apex.oracle.com/pls/otn/f?p=31517:88
    And if you search forum and bit Google, you find lot of solutions

  • Can dreamweaver display PHP class/object just like other IDE does?

    thanks~

    You'll have to ask a more complete question than that. What
    other IDE?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "susan" <[email protected]> wrote in message
    news:gen9bl$jhg$[email protected]..
    > thanks~

Maybe you are looking for