Just noticed a few bugs so far, anyone else?

First off, I love this phone, stood in line for 12 hours to get it and don't regret it. I just noticed a few small problems and was wondering if anyone else is having the same experience.
1) If I send somebody a text message, itll say I sent it to another person too, I'll have to quit SMS or sometimes completely restart the phone for it to show I didn't send it to them, it gets kinda confusing.
2) There's a slight lag when texting, I've gotten used to typing really fast, my old one could keep up pretty well but now it's having a little trouble.
3) Some features are just overall slow, if I hit the home button it might take 5-6 seconds for it to go back, sometimes i'll have to touch a button 3 or 4 times for it to acknowledge it.
4) And the time it takes for the phone to back up while syncing, it does get kind of annoying. I know others are having that problem, I just figured I'd through it in.
I know the phone was just released, I'm not complaining I'm just seeing if I'm the only one. I'm confident Apple will release a software update pretty soon to fix these if more people are having the same issues, they're good about that.
Thanks
Canyon

Not had any issues here and I'm only a few miles away from you.
Colne does seem to still be 3G on EE in many places for some reason with most of the surrounding areas (even the smaller towns and villages) already upgraded to EE 4G, so EE are probably correct in that upgrade work is going on in your area.
Not sure why many of the EE masts in the Colne area seem to have not yet been upgraded to 4G though? When I drive to and from work through Colne everyday, that's the only area now round here where I see my handset drop from 4G to 3G.

Similar Messages

When i reply to an email on my iphone and click send, it just returns to homescreen without sending message, anyone else experienced this?

When i reply to an email on my iphone and click send, it just returns to homescreen without sending message, anyone else experienced this? Its very annoying, esp if i've just typed a long reply!!

try to delete and readd your account then try again

Odd bug... anyone else seeing this?

I have had this three or four times already and haven't seen any posts about this. Sometimes I fully charge my PlayBook, use it for a little while, put it to sleep and leave it somewhere. When I come back a few hours later the BlackBerry logo on the back is warm and when I wake it up the battery is almost drained... or well on it's way to being drained.
I am pretty sure it is just a software issue, and am looking for a connection to anything so it can be easily recreated. I initially thought it might have been tied to using pdf's but I don't believe that is the case. I am trying to make it so that my wife and I close all of the apps when putting it to sleep to see if that helps.
And for the record, my PlayBook is one of the units with the flush power button which my wife just cannot figure out so she lets it timeout ( no matter how much I show her how easy the button is to use ). I have seen this issue happen when I put it to sleep with the button as well, though. Please, RIM, for the love of God add a sleep button to the power app...
Has anyone else noticed this bug? Is it just me? I tried searching the forums but seemed to only come up with threads about charging.
kdittyr
Accepted PlayBook Applications:
HDB Converter -- Utilities/Calculators

Thanks for updating this thread, peter9477, I just came back to suggest the same fix. I haven't tested it just yet, but will certainly do that first thing when I get home.
I will let you know, here, what I find.
kdittyr
Accepted PlayBook Applications:
HDB Converter -- Utilities/Calculators

Persistent Aggregates bug with logic - anyone else see this ?

A long while ago I posted a bug report regarding the use of aggregates with the Stealthplug guitar audio interface. I also reported this on the apple bug report system.
Basically, when using Logic8 with stealthplug and OSX Tiger ( latest 10.4 ) I configured an aggregate using AudioMIDI setup program, configuring Stealthplug as the input and the built in audio as the output.
When one creates an audio track with the aggregate name selected I Logic8
preferences INITIALLY one can get audio input to show up, the "record" button appears and one can hear audio output to the main macbook audio outputs. However on repeated use and selection/deseletion of the particular named aggregate one finds that the stealthplug input is no longer enabled ( the record button disappears).
I found out recently that if I delete the aggregate ( I only had one aggregate st up ) and create a NEW aggregate, this time with a different name, but with the same settings ( stealthplug as input, built in outputs as output ) then one can get the aggregate to work initially in logic8. However after a few sessions, or switching between audo devices in preferences, the aggregate again fails to work, by this i mean I no longer get the "R" button appearing in the channel strip for the input.
Stealthplug works fine when selected itself if one selects this as the device, but NOT when used through an aggregate. I suspect this is something to to do with aggregates and not stealthplug.
My suspicions is that it has something to do with the way logic8 or the CoreAudio system stores its aggregate preference information since I find that if I delete the original aggregate but recreate the same aggregate settings using a different name then the aggregate will work for a short time.
This really needs fixing since aggregates are potentially so useful.
Anyone else seen this with stealthplug or another audi interface ? is the Aggregates system just plain buggy? dos this problem go away in Leopard ?

Well I can say that after installing updates to QuickTime is appears I have been having a lot of trouble with Aggregate Devices as well. I use 2 896HD MOTU interfaces and after a few sessions of Logic, the Aggregate device stops working. I can either (a) reset the computer, (b) sometimes reset the coreAudio driver (works rarely) or (c) create a new Aggregate device like you have and it all starts working again.
Even worse, some of my USB MIDI interfaces like the Fantom X7 just loose connection as well. If I remove the USB and then plug back in, it's recognized again immediately.
Something is seriously broken and I have NO clue where to begin to help fix it. The only thing I could do is re-install OSX 10.5 and not do the quicktime updates and see if that helps. Unfortunately, that is a LOT of work! (I use like 146 AU plugins total).

My iphone 4s voice dictation for text messages is not consistently working. Sometimes it works, other times after the dictation it just gives me a blank space. Anyone else having this problem?

My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else having this problem? I tried the hard reset but that hasn't fixed it.

I have the same problem since updating to IOS 8.3. Any app to which I want to send a new link via IMessage does not allow me to select a contact to send the IMessage to. Using a pre-existing thread does not have same problem.

I have the most recent phone update and iTunes, and when I am trying to upload new music it says "waiting for changes to be applied" but nothing actually changes after a few minutes. Has anyone else had this problem? I can't even remove music

has anyone else had the problem with getting your iphone to sync? i can't get any of my newly downloaded music to sync to my phone from my itunes and i tried to delete all my music and it won't even sync to do that. i dont know what to do.

try a new/fresh apple brand cable and make sure it is the only usb cable in use. this worked for me, i noticed i had no problem with a lighting cable. i did a restore from scratch and from backup and it did not help me...and if you cant sync than you wont be able to get anything but apps back after the restore

Cut and paste bug within Symbols - anyone else?

I've come across a bug in Illustrator CS6. When I cut and paste content from within a symbol into the same or another symbol it pastes all the content from that symbol into it again.
Anyone else having this issue?
I can provide screenshots to help explain.

Same issue here, this is a major problem for me as i use symbols all the time. First time i've had the issue with CS6 - maybe it was always there....
If i cut some text from selected text inside a symbol and paste that text back into another symbol, all the text contained within the first symbol gets pasted even though it was not seletced!
ARGHHH!

I just bought the Otterbox Ipad2...anyone else interested in the new bulletproof case?

...anyone else interested in the new bulletproof case?

I have the defender on my iPad 1 and it will keep your iPad much more secure than any other case I have seen.
It does, however, add over a pound to the iPad and that is just too much for me since my 'home' doesn't usually bounce around much. The smart cover coupled with the clear Xgear rear cover is enough for me.
If Otterbox comes out with a reduced weight 'commuter' case for the iPad 2 I will revisit the issue.

Just got iphone 5s today but fingerprint wont complete just keeps saying try again. Has anyone else had this trouble?

Just got iphone 5s today but fingerprint wont complete just keeps saying try again - has anyone else had this problem?

Hey Lewis1306,
Thanks for the question, and congrats on the new iPhone 5s!
I understand you are experiencing issues with Touch ID. The following article provides some troubleshooting steps that may be helpful:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Resolving issues with Touch ID
1. Verify that you are using the latest version of iOS.
2. Ensure that your fingers and the Home button are clean and dry.*
Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
3. If you are using a protective case or screen protector, it must leave the Home button and the surrounding ring completely unobscured. If it doesn't, remove the case or screen protector and try again.
4. Tap Settings > General > Touch ID & Passcode > Touch ID and verify that:
- iPhone Unlock or iTunes & App Store is enabled.
- One or more fingerprints have been enrolled.
5. If one finger isn't working, tap Edit in Settings > General > Touch ID & Passcode > Touch ID > Edit to delete and then reenroll the finger.
6. If that finger still isn't working, try enrolling a different finger.
7. If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
* Moisture, lotions, sweat, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
Thanks,
Matt M.

When using Facetime, ot works fine at the beginning but it starts to blink for awhile and just turns to black screen. Does anyone else have this problem?

When i'm using facetime or skype video chat, the camera would work just fine for about 5-10mins and then it starts to blink and then just turns into a black screen. Does anyone else have this problem? HELP!

Try Resetting the PRAM

Illustrator Shape Builder Tool: After the latest CC update, the tool alters shapes once edited instead of just removing/adding the desired shape. Anyone else run into this and/or have any fixes?

I am using a PC and installed the latest update of all the CC programs I use (AI, PS, AE, etc.) and within Illustrator I've noticed the Shape Builder Tool doesn't behave exactly as it did in the past. (And not in a good way.)
Previous versions allowed me to edit/add/remove shapes from one another without issue (leaving all shape paths as they were before the editing while making the desired alterations), but the newest behavior seems to alter existing paths once shapes are merged/deleted making the tool almost non-usable.
Not sure if there's a check box I'm missing or what, but have done some brief research on the problem and haven't found anything helpful. If anyone has run into this issue and/or knows a way to correct it, I would greatly appreciate it
Thanks!

Please show a screenshot before and after.

So, starting today I am unable to get any webpage to load, although IE and Chrome work just fine. I'm wondering if anyone else has had this problem, if so has anyone fixed it?

I've tried everything i can think of, reset modem, cleared cache/cookies, restarted my computer, re-install firefox 8.0, and I opened firefox without any addons enabled.
Over the past 2 months, at most, I've had nothing but problems with firefox, firefox 7 wouldn't work right with my logins (after logging in it would not load any pages), so I waited a month and downloaded firefox 8.0, was working fine for a few days then, like I said, it doesn't load pages period. Thank you, anyone who reads this and helps me out.

I've tried everything i can think of, reset modem, cleared cache/cookies, restarted my computer, re-install firefox 8.0, and I opened firefox without any addons enabled.
Over the past 2 months, at most, I've had nothing but problems with firefox, firefox 7 wouldn't work right with my logins (after logging in it would not load any pages), so I waited a month and downloaded firefox 8.0, was working fine for a few days then, like I said, it doesn't load pages period. Thank you, anyone who reads this and helps me out.

HT201365 I just I just updated to iOS 7 and now my calendars are not keeping the information on the days that should be marked. The info is there in my iCloud on my computer, just not on the iPhone. Has anyone had the same problem and what can I do abou

I just update to iOS 7 on my iPhone 4s. The calendars on my iPhone are not keeping the information on the days that should be marked. The info is there in my iCloud on my computer, just not on my phone. Has anyone else had the same problem and what can I do about it? Is it at bug in the iOS 7 update?

What do you mean by "on the days that should be marked"? Are you calendar events displayed on the wrong days?

Anyone else having issues when returning phones after warranty replacement?

Just looking for some feedback, curious if anyone else has dealt with similar issues and what the outcome was...Last week Tuesday evening, October 1st, 2013, I went into my local Verizon store because i was having problems with my phone not charging. They told me there was an issue with the charging port and that they were offering an open enrollment on equipment protection plan and I could get a replacement phone shipped out to me within 2 business days if i enrolled for $10.00 a month. Now mind you I had an upgrade available at the time but was waiting for the Galaxy Note 3 to come out on the 6th. They assured me that it wouldn't effect my upgrade and i could transfer over the insurance to the new device when i upgrade, so not wanting to go a week or so without a phone i agreed and i received the phone promptly in 2 days like they said. Now this is where the problem comes in. I put the phone to be sent back in the box after switching out the battery and sim as instructed and applied the return label that came in the box, and took the box with me to the post office and sent it out. Now today I went to the Verizon store to upgrade to the note 3 but was denied because Verizon is claiming that they have not received the phone that i sent back and they are unable to track it. It seems to me that they should've received it already, and if not they should at least be able to track it by the bar code on the shipping label. I spoke to a rep and he's looking into it and is supposed to get back to me next week, but being a little concerned i googled "verizon warranty return issues" and came across a number of sites such as po'd comsumer.com and a few others where people claim they had the same problem and their phone was never found and Verizon held them responsible and charged them the $400 some dollars or whatever the phones were worth. Anyone here have similar issues???

There are hundreds of other posts on here with similar issues. I myself have had an issue similar but was only able to resolve it as I sent the phone back under my own FedEx Label and not Verizons. The label Verizon sends you the only one that can track is Verizon. And they will not. They also use a hybrid shipping USPS - FedEx or Fedex - USPS. Sending these under your own FedEx label the contract is between You and FedEx only.
That said, they started off saying I never returned the phone. I proved them incorrect with the Signature from FedEx. Then they said the box was empty, I proved them wrong with the weight from FedEx. They they said I sent the incorrect phone back in and gave me the MEI of what i supposedly sent. Proved them wrong as I was holding thae MEI in my hand. They ran out of scripted reasons that what I sent was wrong so I simply told them I would file a theft claim with FedEx and they can investigate, and I was filing a complaint with The Federal Trade Commission. They transferred me to a Supervisor, and the Supervisor went through the exact same script and at the end put me on hold for a few minutes and finally came back to state they were able to find the correct return that they had logged it in with an incorrect date.

Anyone else seeing distortion on raw Sony RX100 images again?

This issue has occurred at least twice since the Sony RX100 came out, and has been fixed twice, but now I seem to be experiencing it a THIRD time. Is it just me, or is this happening to anyone else again-again-again?
I'm running the latest Mavericks, the latest iPhoto, and whatever the current version of Camera RAW is as of June 2014. I don't know exactly when this "happened" because I haven't edited much in the past month or two, but what I'm seeing is that my raw images from my RX100 are randomly displaying distorted (as if the lens data is being interpreted incorrectly) either in view mode, editing mode, or both. The thumbnail view is always correct...which is the dead giveaway that something is amiss and the images are in fact showing up "wrong."
If nobody else is seeing this, I'll just make sure my library is safely backed up and wipe my notebook completely and see if I can fix it. However if others are seeing this please chime in so we'll all know we're not crazy and so we can collaborate on getting Apple made well aware that this has somehow broken yet one more time...

It's super frustrating too, because the editing window comes up correctly at first...but after about a second the image stretches out and looks all wonky.
Try, if reprocessing the RAW files will help.
Export one of the distorted files (File > EXport, Kind Originial), and then reimport it.
That should reprocess the original RAW file, using the reinstalled RAW support.
Can you now edit the file? If yes, back up your iPhoto library and try, if rebuilding the library will reprocess all RAW files.

Just noticed a few bugs so far, anyone else?

Similar Messages

Maybe you are looking for