Just one webpage!!!

Hi,
i have wireless router wrt54gs v.4 and problem is that i cannot get onto just one web page...before that's working fine.Router is up to date (current firmware).All settings seem to be o.k...it's really frustrating.
any ideas? thanks much.

what webpage could it be? one of the web interface of the router or one website? try other pc though
I do know everything, just not all at once. It's a virtual memory problem.

Similar Messages

My iPod Touch 4G 8GB loads one webpage, then the internet hangs.

I let my idiotic friend borrow my iPod Touch 4G 8GB for one week, he brung it back and it's broken on the side. Other then that it's fine, screen, etc.
The internet worked for about a week after I got it perfectly. Now I go on it and it loads one webpage. after when I try to load another website it only loads about 10% along with the small loading circle on the top. it just keeps loading forever and doesn't stop.
I restart my iPod and I can yet again load up another webpage, then it hangs trying to load up another webpage as stated previously.
I tried safari and atomic web browser.
btw,
R.I.P. Steve

I have pictures:
Webpage not loading (I don't play this game.) http://turboimg.com/p/xnk1317937176b.png
Also the iPod touch broken on the side: http://turboimg.com/p/udj1317937219q.jpg
Bad shot I know, but if you can see it's dented out and it's "opened" I can see the inside of the screen.

Problem accessing just one web site. No other site...

I am having problems today connecting to just one website which I use daily.
I get the "internet explorer can not display the webpage" message and the dropdown gives the usual possibilities.
If I put the web address into "isitdownforeveryone or just me" then that reports the site up and running.
I cleared all temp files/cookies, ran a full disk clean and cleaned all in IE that was cleanable. I did the ipconfig /flush DNS command and netstop and net start DNS cache commands and still no joy.
While I kept trying I accidently clicked on the "diagnose problems" on IE failed to display page message and that said something like that "the host server at address 290.xxx.xxx etc had been found but fails to respond when pinged" and that resetting the network can fix problems. I then reset the BT Home Hub and low and behold I had instant access to the problem site. That was OK for the rest of the time the PC was on.
This evening it has done exactly the same (just this one particular site down) and yet resetting the router has again fixed the issue.
Why is this happening all of a sudden and why just seemingly one site affected ? Is it something I should contact BT over ?
I run Vista and IE9.
thanks

Thanks for all the replies folks...
I haven't tried another browser (I like IE and didn't want to install something I don't really want) but I could do to aid trobleshooting if needed (I use Acronis so can roll back).
Anyhow after all the trouble yesterday I unplugged the HH rather than doing a "soft" reset via the button. The site that was problematic is at the moment OK.
If a site is unobtainable for whatever reason why does a reset of the HH "find" a path to the site only for it to fail again.
I see others have had similar issues although Bing.com is one I do use and that has been fine for me.
Whether this is related or not I have no idea but after all the resetting of the HH i thought I would just try Speedtest.net to make sure my line profile hadn't suffered. The "ping" value was a little higher than normal but what was was odd was that the server automatically chosen to run the test was at the other end of the country rather than more local ones.

I have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks

You can download past purchases on this computer with just one Apple ID every 90 days

I have a mac which my fiancee and I share. There are 2 separate accounts and 2 separate apple ids used to buy different music (i.e. we have 2 separate iphones and music collections).
I received the following error (see uploaded image) which states that, "you can download past purchases on this computer with just one Apple ID every 90 days".
Now, when I sync my iTunes and iPhone only some music that I have previously purchases is affected. For some reason they failed to sync with my iPhone and become unavailable in my iTunes ("file cannot be found"). When I deleted the record I saw that it became available for download in iTunes and then discovered this issue.
I have legally purchased the music and just want to be able to sync the files legitimately. It just seems very restrictive to say that you have to have 2 different machines for every account (i.e. you cannot have multiple users on a device with their own accounts which each have their own Apple IDs).
Mikhail

Hi
No - that is the issue - both my husband and I use the same computer and want to be able to use our individual Apple IDs so can access our download content e.g. I-books that we have purchased through our other MAC devices such as I-Pad. In the past, we had four people using one computer with no problem regarding Apple ID. In the newer operating system, we are now restricted to one at a time - it means one of us is blocked out from accessing our content for a period of 90 days. Have you any suggestions on how we can both use our individual Apple IDs with the same lap-top? We have set up discrete accounts so we log on to the computer individually. Many thanks for any help.

HT204053 I want to play newly purchased music but cant, i get the message "You can use iTunes Match on this computer with just one Apple ID every 90 days. (mobileme family pack is the problem i think)

I purchase a new album on my phone but then cannot download it to my laptop - I get the message:
"You can use iTunes Match on this computer with just one Apple ID every 90 days. All I can think is that the problem stems from purchasing a mobileme family & some of the music being my daughters. (she is 9 & I need to be ble to listen to more than Katy Perry & Justin Bieber) Please help! :-(

Welcome to the Apple Community.
Youll get that message when you change the iTunes account you are logged into, you can't keep changing it.

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

Airport Express extends 5 Ghz and 2.4 Ghz or just one at a time?

I recently switched my dual band Time Capsule to use different names for the 5 Ghz and 2.4 Ghz networks.
Will the Airport Express extend both or just one at a time, if so, which one will it extend?
I have two Airport Express modules, bought a long time apart, is there any difference in functionality and how do I tell them apart if this is the case?
All are running the most recent firmware version.

Welcome to the discussion area, Mike!
Will the Airport Express extend both or just one at a time, if so, which one will it extend?
The AirPort Express is a single band device, so it can extend either the 2.4 GHz or 5 GHz band, +but not both at the same time+. Since you have different names for the 5 GHz and 2.4 GHz bands, the Express will extend the 2.4 GHz band by default. Using AirPort Utility, the setup application for the AirPorts, it is possible to configure the AirPort Express to extend either band.
If you are perhaps thinking of extending the 5 GHz band, this can be a bit tricky because 5 GHZ signals do not travel effectively over distance or penetrate obstructions as well as 2.4 GHz signals. You almost have to have a line-of-sight relationship between the Time Capsule and the AirPort Express to be able to extend the 5 GHz band.
I have two Airport Express modules, bought a long time apart, is there any difference in functionality and how do I tell them apart if this is the case?
Look on the side of the AirPort Express for the model number in the small print. You'll need Model No A 1264 to be able to "extend". If you have the older Model No A 1084, that version will not be able to "extend" a wireless network, but you could use it to "join" the wireless network and stream AirTunes to the device.
All are running the most recent firmware version.
That would be 7.5.2. If you have the older version of the AirPort Express, the latest firmware version for that device would be 6.3.
Message was edited by: Bob Timmons

How can I Publish to a Folder just one of the several websites I have created using iWeb?

How can I Publish to a Folder just one of the several websites I have created using iWeb?
it drives me nuts having to emove all the other websites when I want to upload one.
Sparrow

For iWeb, I like to do only one site per domain file. I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
Here are a few of my iWeb sites:
http://www.newcovenant.org
http://www.visionmultimedia.org
http://www.visioncomsolutions.com

IPhoto library Gone! (replaced in just one click w/o ever dragging 2 Trash)

iPhoto library gone / replaced in just one click (w/ o ever dragging anything to the trash)!
I currently own multiple PowerMacs all sharing the same high speed local network. All of them run the latest / Mac OS X.4.9 and have multiple HD’s (both internal and external) as well as iLife’ 06. And all of them also have iChatAV3 and are able to video chat one with the other at will while on the same local high speed network.
This is my very first iPhoto library nightmare since I’ve owned a mac. and yes I’ve always been conditioned to backup everything one wishes to keep. This particular scenario is no different. (altho my back up HD for one of the three G4 computers involved was a bit dated by at least 6 months).
This was essentially triggered via two separate iLife ‘06 apps , namely iPhoto and iChatAV3 (combined with at least an ounce of stupidity on my part). That combined with 2 people not communicating properly / being on the same page (or rather the same Folder) when working on the very same task. Hey... I do NOT claim to be an expert at this particular application even though I have used macs since apple first introduced the Apple IIe decades ago. So this does not stem from lack of experience but rather not thinking things thru entirely in terms of all the possible consequences of simple, yet catastrophic actions when it comes to replacing or authenticating one particular folder containing the entire iPhoto Library simply titled “pictures”.
Starts like this, ichatav is open on 2 of three macs and my teenage daughter asks me to send her a roll of pictures she downloaded into my computer (since it’s twice as fast as her own) from her digital still camera. Now she wants all 12 photos on her computer as well. So I drag all 12 photos to my desktop and place them in a folder titled “Jackies pics”. I drag this folder to her icon on my buddy list and ichat AV simply refuses to allow sending the entire folder and ask me to send them one at a time. That should have been my first clue. Strange I thought. Always worked well in the past. Why not now? So I tell her over ichatav that the app simply won’t allow me to send her the entire folder and that I’ll have to send them one at a time. Please make a new folder on your HD called Jackie’s pics. She agrees and creates a folder on her end called .... (you guessed it) ...... “pictures”...... to which she drags each of the 12 images I sent over our local network.
Little did she realize this newly created folder has the makings of an atomic bomb when it comes to importing the entire folder into iPhoto’s library on her own mac. A dialog box quickly materializes asking that she “authenticate” or hit cancel. So she ask me what to do. I said that’s fine, hit authenticate (assuming she titled it Jackies pics). BIG mistake! She hits authenticate and now she has the 12 images I sent her in iPhoto....BUT .... the 1600 or so originals in the entire iPhoto library quickly vanishes. Her entire iphoto library is now wiped out or rather replaced with this new folder. She asks me, what happened? And in less than 30 seconds she in complete tears. Over 2-3 years of her photos (all 1600 images) gone in the click of a mouse.
Today is father’s day .... and I remembered that I have a complete backup of her HD (even though it is a bit dated). So together, we managed to recover about 90% of the lost images. If anyone reading this knows how I can possibly recover the final 10% (most current photos) then please help us.
Bottom line: We were fortunate. This Father’s Day iPhoto Nightmare ended happily....
TIA
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8)

Just another update .... Today, my daughter was multitasking on her G4 powermac working within iPhoto as well as email account and last but not least the latest iTunes. As she opened this final app (and I mean "final").... her entire hard drive bit the dust after she saw the spinning beachball and hence attempted to force quit. (I should also point out we are having a heat wave in San Diego today ...which also may have contributed to this hardware issue mainly).
This time, I had a complete updated copy of her HD and simply cloned it to a new hard drive. Took me a few hours to troubleshoot, clone and install a new drive in its place. But all is working normally again (sure hope it stays that way this time).
Friendly reminder to those who read this post .....
BACKUP, BACKUP, BACKUP .... ESPECIALLY IN IPHOTO & ITUNES!

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

In Mail, is it possible to extract email addresses of senders from just one account inbox?

In Mail, is it possible to extract email addresses of senders from just one account inbox?

Click on the arrow next to the number of emails in the conversation. That'll show you each separate email. You can create a new mailbox (call it what you want) and drag that email out of the conversation into that mailbox.

How to overload two different procedure with just one name in to package

i have created two procedure avg1 and avg2.avg1 calculate average of total salary based on e_id and avg2 calculate average based on j_id.now i want to create a package with specification and body where i want to use just one name -avg- for two different procedure.

You can overload the same name for procedure as long as their formal parameters differ in number, order, or datatype family.
Read more about overloading in documentation

I have an iTunes account with music. My wife has an iTunes account with apps. How do I get both on our iPad2? Without syncing to just one account?

I have an iTunes with music and videos. My wife has an iPhone with music and apps. How do I get both on our iPad2?
Without syncing to just one account?
We each have our own laptops.

Hmm.
Probably easier for me to put all my stuff on my wife's computer I suppose.
Rebuilding all those iTunes playlists is not very fun though.
And of course anything new that I want on my laptop I will have to duplicate on her laptop in the future.
Not sure how iCloud works just yet.
So you can't have two laptops and manually sync both people's stuff to one iPad?

You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 90 days.

So i signed into my other itunes account to download some purchase i had made on that account, went to sign back into my new account and download purchases i had made on my iphone adn it tells me "You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 90 days.". This is a shared family computer with multiple Apple IDs being used on it. Not cool apple. This needs to be figured out. Not acceptable for families that have more than one apple ID to have to wait 3 months to download old purchases. Get real. Any way i can 'override' this?

http://support.apple.com/kb/ht4627
http://www.apple.com/feedback/
Contact itunes support. They may grant a one time exception at their discretion.
https://getsupport.apple.com

Just one webpage!!!

Similar Messages

Maybe you are looking for